Department Of Sports And Youth Affairs has published Development Of Sports Infrastructure Facilities In Cusat Campus, Kalamassery-Ground Development And Construction Of Natural Football Turf Sub Grade Preparation, Kerb And Drainage, Fencing, Natural Football Turf, Sump Tank, Sprinkler System, . Submission Date for this Tender is 20-08-2022. Irrigation System Tenders in kalamassery Kerala. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Sub grade Preparation, Kerb and Drainage |
| 2 | 2.2 : Clearing grass and removal of rubbish up to a distance of 50 metres outside the periphery of the area |
| 3 | od135704/2022_2023 : Construction of embankment / filling up ground depressions with material obtained from earth cutting with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2. |
| 4 | 3.19.1 : Loosening of the ground upto a level of 500 mm below the sub-grade level, watered, graded and compacted in layers to meet requirement of table 300-2 forCompacting original ground supporting sub-grade construction. |
| 5 | 12.1.B.1 : Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. Ordinary Soil - Depth upto 3m - Mechanical Means |
| 6 | od129783/2022_2023 : SKF_ODMORTH 1/2022-2023 Plain cement concrete 1:4:8 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed and placed in foundation |
| 7 | 12.8.1.C.1 : Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications RCC Grade M20 - Using Concrete Mixer |
| 8 | 12.40 : Supply, Fitting and Placing un- coated HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Specifications |
| 9 | 55.25 : Lifting, conveying and fixing the newly casted RCC covering slabs of any thickness on top of drain in position including all labour charges and miscellaneous expenses etc complete |
| 10 | 15.4.A : Providing and laying Pitching on slopes laid over prepared filter media includingboulder Stone/Boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specifications |
| 11 | 15.5 : Providing and laying Filter material underneath pitching in slopes complete as per drawing and Technical specification |
| 12 | 15.6 : Laying of a geotextile filter between pitching and embankment slopes on which pitching is laid to prevent escape of the embankment material through the voids of the stone pitching/cement concrete blocks as well as to allow free movement of water without creating any uplift head on the pitching. |
| 13 | od135240/2022_2023 : Supplying Auto Level of 24x magnification, 32mm objective aperture, 2mm accuracy, 20cm minimum focus and IPX6 protection with 5 meter Leveling Staff and Aluminium Tripod Stand of approved make specified by the officer in charge. |
| 14 | od135242/2022_2023 : Supplying Laser Distance Meter - 40m range of accuracy of upto +/-1.5mm , Vial bubble for increased levels of precision, Carefully designed rubberized body for comfortable handling, and a backlit screen for better visibility in dark areas, IP54 and CE certified of approved make specified by the officer in charge. |
| 15 | od135248/2022_2023 : Supplying 50m : 13mm Fibre Glass Measuring Tape of approved make specified by the officer in charge. |
| 16 | od135249/2022_2023 : Supplying 5m : 19mm Steel Measuring Tape of approved make specified by the officer in charge. |
| 17 | Fencing |
| 18 | od129778/2022_2023 : Steel work for fencing with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete |
| 19 | od129779/2022_2023 : Providing and fixing G.I fabric mesh of required width in mesh size 50x50mm or nearest size made of G.I wire of dia 4mm including welding, fitting and 2 coats of premium enamel paint with approved steel primer etc at all levels as per the direction of Engineer in charge |
| 20 | 13.61.1 : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work |
| 21 | Natural Football Turf |
| 22 | od129803/2022_2023 : Providing and fixing PVC pipes with 5 mm dia perforations, minimum 125 perforations per running metre, in trenchesat required slope, as per specifications etc complete including the cost of all materials, labour etc. and as directed by the Engineer-in-charge.Care should be taken while laying so that the perforations shall be along the bottom side of the pipe. The rateincludes cost of all materials, covering the pipe with Geo Textile Cloth,labour charges for trenching carriage of surplus earth to a lead of 50m etc complete. including jointing of pipes with one step PVC solvent cement etc complete as per direction of Engineer-in-Charge 110 mm dia 6 Kgf/cm2. |
| 23 | od129809/2022_2023 : Providing ,Laying, spreading and compacting stone aggregate of specified size 20mm downgraded metalas filter media around the drainage pipes in the sides of trench as per the directions of Engineer-in-charge. Rate inclusive of all materials,transportation and labour charges complete.The work has to be executed as per detailed specifications, and or as approved by Engineer-in charge.<br>Quantity measured based on the stack measurement and the stack shall be of standard dimensions. |
| 24 | od129810/2022_2023 : Providing ,laying and spreading of compacted fill with 20mm metal (Coarse Rubble Granite Stone) to form a contour and elevations in uniform thickness,rolling with 3 wheeled road / vibratory roller 8-10 tonne capacity in stages to proper grade and camber, as per Drawings.Rate inclusive of all materials,transportation and labour charges complete.The work has to be completed as per detailed specifications and or as approved by Engineer-in-charge.Quantity measured based on the stack measurement and the stack shall be of standard dimensions. |
| 25 | od129811/2022_2023 : Providing ,laying and spreading of compacted fill with 10mm metal (Coarse Rubble Granite Stone)to form a contour and elevations in uniform thickness,rolling with 3 wheeled road / vibratory roller 8-10 tonne capacity in stages to proper grade and camber, as per Drawings.Rate inclusive of all materials,transportation and labour charges complete.The work has to be completed as per detailed specifications and or as approved by Engineer-in-chargeQuantity measured based on the stack measurement and the stack shall be of standard dimensions. |
| 26 | od129812/2022_2023 : SKF_OD 8/2022-2023 Supply and Laying 120 GSM Geotextile Membrane as per direction of Engineer - in - Charges. |
| 27 | od129981/2022_2023 : SKF_OD 6/2022-2023 Sieving excavated Earth through sieve of I.S. designation 4.75 mm and collecting good quality earth for measurement including stacking.<br> |
| 28 | od129982/2022_2023 : SKF_OD 4/2022-2023 Supplying and stacking for measurement Sieved Jamuna Sand at site including royalty and carriage upto 5 k.m. lead complete.<br> |
| 29 | 30.2.4.3 : Screened through sieve of I.S. designation 4.75 mm |
| 30 | od129813/2022_2023 : SKF_OD 2/2022-2023 Mixing earth, sand and manure in the required proportion specified or directed by the Officer-in-charge |
| 31 | od129814/2022_2023 : SKF_OD 3/2022-2023 Spreading of earth, sand and manure in required thickness as per direction of officer-in-charge(cost of earth, sand and manure to be paid separately). |
| 32 | 30.2.7 : Fine dressing of the ground |
| 33 | 30.2.56 : Anti termite treatment of lawn area through premise 30.50% I P. one literpremisediluted in 499 liters water and applying solution @ 1.00 litre solution per sqm lawn or bed area.(two application) i/c cost of chemical)andas per direction of officer-in-charge. |
| 34 | od129815/2022_2023 : SKF_OD 1/2022-2023 Grassing with Bermuda grass, rolling the surface with light roller make the surface smoothen and even including watering and maintenance of the lawn for 60 days or more till the grass forms a thick lawn, free from weeds and fit for mowing as per the Direction of Engineer in Charge.<br>In rows 5 cm apart in both directions |
| 35 | 50.18.9.9.1 : Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of Joints complete as per direction of engineer in charge.110 mm dia 6Kgf/cm2 |
| 36 | 19.6.4 : Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 ( 1 cement : 2 fine sand) including testing of joints etc. complete:300 mm dia R.C.C. pipe |
| 37 | Sump tank |
| 38 | 2.6.1 : Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil |
| 39 | 2.26.1 : Extra for every additional lift 1.5 m or part there of in excavation / banking excavated or stacked materials.All kinds of soil |
| 40 | 4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) |
| 41 | 5.1.2 : Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size |
| 42 | 5.9.2 : Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. |
| 43 | 5.9.3 : Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform |
| 44 | 5.9.5 : Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers |
| 45 | 5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more |
| 46 | 22.5 : Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg /sqm mixed with water proofing cement compound @ 0.126 kg/ sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. |
| 47 | 19.19.1.1 : Providing and fixing in position Pre-cast R.C.C. manhole cover and frame of required shape and approved quality.L D - 2.5Rectangular shape 600x450 mm internal dimensions |
| 48 | 50.6.1.8 : Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in: CM 1:6 ( 1 cement : 6 coarse sand etc complete |
| 49 | 5.3 : Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 150 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size). |
| 50 | 5.22A.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or more |
| 51 | 13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) |
| 52 | 13.16.1 : 6 mm cement plaster of mix:1:3 ( 1 cement : 3 fine sand) |
| 53 | 13.48.1 : Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr /10 sqm |
| 54 | 10.5.2 : Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using flats 30x6 mm for diagonal braces and central cross piece |
| 55 | 13.61.1 : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work |
| 56 | Sprinkler System |
| 57 | od294486/2021_2022 : POP UP SPRINKLERS<br>Supply,installation testing and commissioning of Popup sprinkler full and semi/part circle filtration of radiusthrow minimum 15 m up to 23 m & flow of 0.09-0.61lps. at an operative pressure of 2.5-4.5kg/cm.sq., <br>The Sprinkler is Gear driven rotary type with slip clutch mechanism and heavy duty retract spring. memory arc, nonstrippable and brass reinforced nozzle turret, left right both side arc adjustment, Memory arctechnology, part and full circle in same sprinkler. <br>The sprinkler shall have Multi-function, pressure-activated wiper seal for low pressure opreration.<br>The sprinkler shall have Internal Seal-A-Matic device which prevents low head drainage (up to 3.1 m) & hence puddling & erosion. The body of sprinkler is of non-corrodible, heavy duty, ABS plastic. Work has to be executed as per the approved drawings and as per the direction of Engineer in charge. |
| 58 | od294487/2021_2022 : Supply, Fixing & Commissioning of1" Pop up Connecting Swing joint Assembly. The tubing shall be made of UPVC, a working pressure of 5.5kg/cm2 at 43 degree celcius and a surge pressure of 16.6kg/cm2. The fittings shall be made of UV resistant thermoplastic. Work has to be executed as per the approved drawings and as per the direction of Engineer in charge.Rate inclusive of all materials,fittings,labour,transportation complete. |
| 59 | od294488/2021_2022 : Supply, Fixing & Commissioning of Sod Cup Kit allows users to grow turf on the cap of the rotors. This allows for an early invisible installation for applications such as sports fields. The rugged construction of the Cup Kit provides maximum durability while maintaining maximum player safety. Integral pullup slot. Easy arc adjustment after installation through inner cup. Drain holes top romote healthy turf growth. Work has to be executed as per the approved drawings and as per the direction of Engineer in charge.Rate inclusive of all materials,fittings,labour,transportation complete. Engineering plastic |
| 60 | od294490/2021_2022 : PUMPING UNIT <br>Supply, Fixing & Commissioning ofMonoblock or open well submercible pumpset of having discharge and head of design flow . Duty of Pump : min 4 lps / Each Pump<br>Pressure Head Range = min 50 - 55 RM. No of pumps: 1 working + 0 standby. Work has to be executed as per the approved drawings and as per the direction of Engineer in charge.Rate inclusive of all materials,fittings,labour,transportation complete. |
| 61 | od294491/2021_2022 : Supply, Fixing & Commissioning of Brass key threads into top of quick coupling valve to provide water access. Work has to be executed as per the approved drawings and as per the direction of Engineer in charge.Rate inclusive of all materials,fittings,labour,transportation complete. |
| 62 | od294492/2021_2022 : Supply, Fixing & Commissioning of 1.5'' quick coupling valve made up of solid brass with locking cover corrosion resistant and SS spring. Work has to be executed as per the approved drawings and as per the direction of Engineer in charge.Rate inclusive of all materials,fittings,labour,transportation complete. |
| 63 | od294493/2021_2022 : Supply, fixing & Commissioning of 6" Round box of HDPE or higher grade material with green lid and corrugated structure with unique shovel access slot and bolt hole knock out.Work has to be executed as per the approved drawings and as per the direction of Engineer in charge.Rate inclusive of all materials,fittings,labour,transportation complete. |
| 64 | od294495/2021_2022 : Supply, Fixing & Commissioning of 12" Rectangular Valve Box made of HDPE ,or higher grade material with green lid and corrugated structure with unique shovel access slot and bolt hole knock out. Work has to be executed as per the approved drawings and as per the direction of Engineer in charge.Rate inclusive of all materials,fittings,labour,transportation complete. |
| 65 | od294498/2021_2022 : Supply, Fixing & Commissioning of Double acting 1/2" Air release valve, made of HDPE material. The Air release valve shall be capable of both releasing and admitting air from and into the line. Work has to be executed as per the approved drawings and as per the direction of Engineer in charge.Rate inclusive of all materials,fittings,labour,transportation complete. |
| 66 | od294499/2021_2022 : Supply, Fixing & Commissioning of PVC Ball Valve, security pivot to maintain lever in space, double water tight joint, direct injection stem, non mechanical, with a base which permits maximum penetration into the valve of size 63mm with pressure rating PN10. <br>Work has to be executed as per the approved drawings and as per the direction of Engineer in charge.Rate inclusive of all materials,fittings,labour,transportation complete. |
| 67 | od294501/2021_2022 : Supply, Fixing & Commissioning of Pump relay 24AC PLA relay, stabiliser 300watts Work has to be executed as per the approved drawings and as per the direction of Engineer in charge.Rate inclusive of all materials,fittings,labour,transportation complete. |
| 68 | od294503/2021_2022 : Supply, Fixing & Commissioning ofASTM automatic rain shut off device, latching hinge with multiple rain fall settings 5mm to 20mm ULCUL listed Work has to be executed as per the approved drawings and as per the direction of Engineer in charge. |
| 69 | od294505/2021_2022 : Supply, Fixing & Commissioning of Moisture sensing device, to measure soil temp, EC, Moisture level complete to convert as smart controller, with corrosion resistant sensor and setting threshold moisture level. Work has to be executed as per the approved drawings and as per the direction of Engineer in charge.Rate inclusive of all materials,fittings,labour,transportation complete. |
| 70 | od294506/2021_2022 : Supply, Fixing & Commissioning of Direct bury-on wire connect or with strain relief, UL 486 D certified, with water proof silicon sealant, fits wire from 22ga to 6ga as per specifications complete.Work has to be executed as per the approved drawings and as per the direction of Engineer in charge.Rate inclusive of all materials,fittings,labour,transportation complete. |
| 71 | od294507/2021_2022 : Supply, Fixing & Commissioning ofPressure Regulating Module (Dial) to Maintain constant outlet pressure between 1.04 to 6.9 bar. Work has to be executed as per the approved drawings and as per the direction of Engineer in charge.Rate inclusive of all materials,fittings,labour,transportation complete. |
| 72 | od294508/2021_2022 : Supply, Fixing & Commissioning of2" Solenoid globe Valves with fabric reinforced diaphram and rugged PVC construction ,compatible and slow closing to prevent water hammer, pressure rating upto 10.4bar and maximum flow of 150GPM ,max water temp. upto 42degree centigrade, with 24AC solenoid,current rating 0.41A @60Hz,coil resistance 30 ohm with provision to attach Pressure Regulating Module (Dial). Work has to be executed as per the approved drawings and as per the direction of Engineer in charge.Rate inclusive of all materials,fittings,labour,transportation complete. |
| 73 | od294509/2021_2022 : Supply, Fixing & Commissioning of3" Solenoid globe Valves as central shut off valve with fabric reinforced diaphram and rugged PVC construction ,compatible and slow closing to prevent water hammer,pressure rating upto 0.7 to 10 bar and maximum flow of 10 to100 m3/h ,at water temp. upto 60°C with 24 VAC - 50 Hz,coil resistance 30ohm with provision to attach Pressure Regulating Module (Dial). Work has to be executed as per the approved drawings and as per the direction of Engineer in charge.Rate inclusive of all materials,fittings,labour,transportation complete. |
| 74 | od294510/2021_2022 : Supply, Fixing & Commissioning of ASTM Station Modular Controller UV resistant,wall mount case,with LCD display ,non volatile memory,10KV surge protection with removable front panel and programmable under battery in office,total run time calculator ,short detect errors,one touch watering,with contract default programes,slow closing valve removable battery with sensor terminals.Work has to be executed as per the approved drawings and as per the direction of Engineer in charge.Rate inclusive of all materials,fittings,labour,transportation complete. |
| 75 | od294511/2021_2022 : Automation Equipment<br>Supply, Fixing & Commissioning of Automation Equipment: 14 Awg cable with high molecular weight polyethelene and applications upto 600volts , temperature upto - 55 to+ 60 deg centigrade ,soft drawn bare copper meeting ASTM B3, tensile strength 1400PSI for two way communication between solenoid valve and decoders complete .Work has to be executed as per the approved drawings and as per the direction of Engineer in charge.Rate inclusive of all materials,fittings,labour,transportation complete. |
| 76 | od294512/2021_2022 : Supply, Fixing & Commissioning ofCI Paddle Wheel Water Meter Metal Flanged of pressure rating 10 Bar with all accessories . Work has to be executed as per the approved drawings and/or as per the direction of Engineer in charge.Rate inclusive of all materials,fittings,labour,transportation complete. |
| 77 | od294513/2021_2022 : Supply, Fixing & Commissioning of PVC Pressure release valve 2" with all accessories . Work has to be executed as per the approved drawings and as per the direction of Engineer in charge.Rate inclusive of all materials,fittings,labour,transportation complete. |
| 78 | od294514/2021_2022 : Supply, Fixing & Commissioning of 2" gunmetal Non Return Valve PN10 with all accessories to prevent back flow. Work has to be executed as per the approved drawings and as per the direction of Engineer in charge.Rate inclusive of all materials,fittings,labour,transportation complete. |
| 79 | od294516/2021_2022 : Supply, Fixing & Commissioning ofCI control Valve, Butterfly Valve inmainline for by pass and flow diversion of approved quality with pressure rating of PN10. Work has to be executed as per the approved drawings and as per the direction of Engineer in charge.Rate inclusive of all materials,fittings,labour,transportation complete. |
| 80 | od294517/2021_2022 : Supply, Fixing & Commissioning ofSuction, Delivery & Header Pipes of size suitable for the pump flow (ASTM sch40/80 orPVC10Kg/cm2). Work has to be executed as per the approved drawings and as per the direction of Engineer in charge.Rate inclusive of all materials,fittings,labour,transportation complete. |
| 81 | od294518/2021_2022 : Supply, Fixing & Commissioning ofControl panel suitable for pump set having panel box made of CRCA sheet of 2mm thickness and fixed along withDOLstarter, start/ stop push buttons, Ammeter, Single phase preventor, Voltmeter, Indicating lamps, MCB, Dry level guard sensor with control cable,etc. Work has to be executed as per the approved drawings and as per the direction of Engineer in charge.Rate inclusive of all materials,fittings,labour,transportation complete. |
| 82 | od294519/2021_2022 : Supply, Fixing & Commissioning of HDPE services saddle of varying size with pressure rating of PN10. Work has to be executed as per the approved drawings and as per the direction of Engineer in charge.Rate inclusive of all materials,fittings,labour,transportation complete. |
| 83 | od294520/2021_2022 : Supply, Fixing & Commissioning of 3"Disc Filter made of HDPE having an suitable inlet connections,spinning particulate in suspension away from the filter ingelement , 3/4" out let for flushing at bottom of filter & maximum working presure of 12Bars. Work has to be executed as per the approved drawings and as per the direction of Engineer in charge.Rate inclusive of all materials,fittings,labour,transportation complete. |
| 84 | od294522/2021_2022 : Design,supply,laying & jointing in position of HDPE pipe <br>40mm 6Kg for automation wiring duct |
| 85 | od294524/2021_2022 : Design supply,laying & jointing in position of HDPE pipe <br>63mm 6Kg |
| 86 | od294525/2021_2022 : Design supply,laying & jointing in position of HDPE pipe <br>90mm 6Kg |
| 87 | Flood light and connected works |
| 88 | od294484/2021_2022 : Supply Conveyance, installation, testing and commissioning of high quality integrated 500W LED Floodlight luminaire with greater than 63,000 Lumens Light output greater than 135 Lumens per watt system efficiency using High power LED's of minimum 2-3w per LED, Integrated Peanut Lens shall be mounted on each LED by injection moulding process on PC cover to reduce vaccum space inside LED module and the fitting shall have IP66 with IK08 Protection. CRI>70 and Ripple value should be less than 10%. The Luminaire should have 20 KV /10 KA SPD duly bolted in the Luminaire and the SPD should be able to sustain a minimum 15 hits of 10KA rating i.e. Total of 45 hits across all the three modes as per IEEE 62.41.2 standards,. Operating voltage of 120-270, 440V Phase to Phase protection for 8 hours and L70 of LED at 75,000 burning hours. .<br>Make: Approved by engineer in-charge. |
| 89 | od131700/2022_2023 : Supply and Installation of 20 mtr fixed type Stadium mast suitable for mounting minimum 15 nos of luminaires, made of Hot-dip Galvanization process as per IS 4759:1996 with monkey cage ladder arrangement and maintenance platform for easy maintenance and aiming of luminaires with lightening spike. The pole shaft shall be made of 4mm thickness in 2 sections, base dia not less than 250mm and the base plate shall be of min 20mm thick. with all accessories and luminary carriage suitable to install 12/15 nos luminaries in symmetrical arrangement equivalent including RCC foundation with fixed bolts as required and lighting spikes approved by engineer in-charge. |
| 90 | od131582/2022_2023 : MSB<br>Supply, installation, testing and commissioning of LT Switch Board (Main Panel), cubicle type, made out of 2mm thick CRCA sheet,totally enclosed, IP 42, wall / floor mounting, dust and vermin proof, indoor, compartmentalised, suitable for operation on 3 phase , 415 V, 50Hz AC system with busbars , including internal wiring with suitable size wires/cable, interconnection, duly powder coated with seven tank process etc. The panel shall be fabricated from a firm having CPRI certification with test certificates for similar panel (required for short circuit rating, temperature rise and IP classification) and with following switchgears, metering instruments and accessories etc. complete as required as per drawing & specification. The Panel shall be of Form 4 Construction.<br> Instruments RYB Indicating lamps LED type , 4A SP MCB, (0-500)V Class 1 with 90 deg defl. Scale-,(0-125)A Class 1 with 90 deg defl. Scale, Ammeters as Per sld, switch ,Voltmeter selector switch , 125/5 A 5 VA Class 1 CTs , Digitalmultimeter to read V,A.Hz,PF,kWH , surge protection device (type1) etc. as per SLD<br>Incomer- 125A,25 KA, FP Moulded Case Circuit Breaker with thermal release with OL and SC protection neutral link (Ics =100%Icu= 25KA) -1 Nos<br> 200A TPN busbar chamber with Aluminium busbar<br>Out goings - 100A TP +NL Moulded Case Circuit Breaker with thermal release with OL and SC protection neutral link (Ics =100%Icu= 25KA) -1 Nos, 63A TP +NL Moulded Case Circuit Breaker with thermal release with OL and SC protection neutral link (Ics =100%Icu= 25KA) -2 Nos <br>40A TP +NL Moulded Case Circuit Breaker with thermal release with OL and SC protection neutral link (Ics =100%Icu= 16KA) -1 Nos, <br>The panel shall be Top Entry/Exit and suitable for termination of cable system as per SLD and technical specification.<br> |
| 91 | od131589/2022_2023 : ODP<br>Supply, Installation, Testing and Commissioning of Outdoor Lighting Panel (ODP) cubicle type, totally enclosed, IP 65, pedestal mounted, free standing with top canopy, dust and vermin proof, water proof suitable for operation on 3 phase, 415 V, 50Hz AC supply with provision for fixing incoming & outgoing switches fabricated using 2mm thick CRCA sheet, powder coated, including internal wiring with suitable size wires/cable, interconnection, duly powder coated painting etc., The panel shall be fabricated from a firm having CPRI certification with test certificates for similar panel (required for short circuit rating, temperature rise and IP classification) including following switchgears accessories for the LT Panel. <br>INCOMER<br>100 A, FP, 25kA, MCCB with adjustable thermal magnetic release with OL & SC protection – 1 no. <br>BUSBARS<br>100 Amp TPN busbars of high conductivity electrolytic quality aluminium alloy – 1set<br>INSTRUMENTS<br>Surge protection device -Type1+2<br>(0-500)V voltmeter Acc.class 1 with VSS- 1 No<br>(0-100)A ammeter Acc. class 1 with 90deg defl. scale - 3Nos <br>4A, C curve SP MCB - 3 Nos.<br>RYB indication lamp, LED type - 1 Set<br>OUTGOINGS<br>25 A, FP RCCB (100mA)-9 Nos<br>25 AC Curve FP MCB-9 Nos. <br>The rate for the foundation shall be measured with civil works<br> |
| 92 | 90.11.1.15 : Supply and installation ofsheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required 6 way (8+18) -double cover TPN vertical DB with provision for fixing 4P MCB / Isolator/ RCCB/ RCBO as incomer and SP/ TP MCB as outgoing (IP 42/43) |
| 93 | 2.10.1 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole |
| 94 | 2.10.4 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Triple pole |
| 95 | 2.11 : Supplying and fixing single pole blanking plate inthe existing MCB DB complete etc. as required. |
| 96 | 2.13.1 : Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps |
| 97 | 2.15.2 : Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps |
| 98 | 90.12.5.40 : Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.4 core 10 sq mm |
| 99 | 90.12.5.41 : Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.4 core 16 sq mm |
| 100 | 90.12.5.42 : Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.4 core 25 sq mm |
| 101 | 90.12.7.40 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 10 sq mm with factory made clamp |
| 102 | 90.12.7.41 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 16 sq mm with factory made clamp |
| 103 | 90.12.7.42 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 25 sq mm with factory made clamp |
| 104 | 90.12.1.1 : Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium powercable of 1.1KV grade of the following sizes in ground including excavation of trench of size 35 x 75 cm, refilling the trench etc. as required but excluding sand cushioning and protective covering (in ordinary soil). 2 core 4 sq mm |
| 105 | 90.12.1.12 : Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium powercable of 1.1KV grade of the following sizes in ground including excavation of trench of size 35 x 75 cm, refilling the trench etc. as required but excluding sand cushioning and protective covering (in ordinary soil).3 core 4 sq mm |
| 106 | 90.12.10.4 : Supply & laying of DWC pipe in ordinary soil 0.75m below ground level including excavation 77/63 mm or nearest size |
| 107 | 90.12.10.6 : Supply & laying of DWC pipe in ordinary soil 0.75m below ground level including excavation. 110/94 mm or nearest size |
| 108 | 90.6.5.13 : Supply and drawing the following sizes of multi-core PVC insulated & FRLSPVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.3 core 4.00 sq mm |
| 109 | 1.21.2 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm |
| 110 | 90.12.5.46 : Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.4 core 95 sq mm |
| 111 | 90.12.9.7 : Supplying, laying and jointing of the following sizes of double wall corrugated (DWC) pipes made out of HDPE conforming to IS 14930 Part II for mechanical protection to underground power cables with all required accessories in ground in the existing trench 120/102.5 mm or nearest size |
| 112 | 90.12.7.46 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 95 sq mm |
| 113 | 90.12.7.30 : Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 70 sq mm |
| 114 | 90.12.5.30 : Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.3.5 core 70 sq mm |
| 115 | 9.1.32 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 10 sq. mm (25mm) |
| 116 | 9.1.33 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 16 sq. mm (28mm) |
| 117 | 9.1.34 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 25 sq. mm (28mm) |
| 118 | 9.2.20 : Supplying and making outdoor end termination with cast resin compound including aluminium lugs and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2 X 70 sq. mm |
| 119 | 9.1.13 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 X 95 sq. mm (38mm) |
| 120 | 9.2.10 : Supplying and making outdoor end termination with cast resin compound including aluminium lugs and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 X 95 sq. mm |
| 121 | 90.16.1.4 : Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required 4.00 mm copper conductor ( 8 SWG) |
| 122 | 90.16.1.3 : Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required 3.15 mm copper conductor ( 10 SWG) |
| 123 | 5.7 : Supplying and laying 6 SWG G.I. wire at 0.50metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required. |
| 124 | 5.18 : Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required. |
| 125 | 5.1 : Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal/ coke and salt ) as required. |
| 126 | 90.15.4.3 : Supply Conveyance, installation, testing and commissioning of 70W LED street light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea withpower factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing,acrylic cover complete with THD Less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance(LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer) |
| 127 | 1.10.1 : Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group A |
| 128 | 1.10.2 : Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group B |
| 129 | 1.14.1 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2x1.5 sq.mm + 1x1.5 sq.mm earth wire |
| 130 | 1.14.2 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 131 | 1.24.3 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15/16 amp switch |
| 132 | 1.24.5 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet |
| 133 | 1.27.2 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.3 Module (100mmX75mm) |
| 134 | 1.27.4 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.6 Module (200mmX75mm) |
| 135 | 2.3.2 : Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator8 way, Double door |
| 136 | 2.10.3 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Double pole |
| 137 | 2.14.1 : Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.25 amps |
| 138 | 5.9 : Supplying and laying 25 mm X 5 mm G.Istrip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required.(Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) |
| 139 | 7.10 : Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required. |
| 140 | od131594/2022_2023 : Supply, installation, testing and commissioning of KSEB metering panel, suitable for accomodating 3 Phase CT operated TOD meter and consisting of 3 nos. of 125 A cutout with HRC fuse( or as per KSEB) , neutral link, 125A ,25 kA,FP MCCB with earth leakage protection, in separate chamber,inter connections etc. as required, and necessary supports to be fabricated out of 14 SWG CRCA sheet with locable door with sealing facility having glass window for energymeter, sealing facility for KSEB, top canopy and necessary overhang, undergone seven tank process ,powder coated finish and all mounting accessories. The panel shall be with all accessories as per drawing & specification. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
