Comprehensive Colony Maintenance Works Of Shankarpur Colliery Under Bankola Area For A Period Of Two Years ( Re-Tender ) .Nit No.: Ecl / Ba / Gm / Ae ( C ) / E-Tender / 22-23 / 107 Dated: 29.07.2022
Tender Value
1.88 Crore
Estimated cost
Bid Submission
20 Aug 2022
0 days left
EMD
2.35 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
shankarpur → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Comprehensive Colony Maintenance Works Of Shankarpur Colliery Under Bankola Area For A Period Of Two Years ( Re-Tender ) .Nit No.: Ecl / Ba / Gm / Ae ( C ) / E-Tender / 22-23 / 107 Dated: 29.07.2022
BOQ
| Sl. No. | Item Description |
| 1 | Deployment of Facility Manager for heading the entire team and single point of contact & overall incharge of FM on site operators and reporting to Engineer-in-charge or his representative. (Note: Minimum one Facility Manager is to be deployed on monthly basis only) |
| 2 | Deploymentof 1 (one) no. mason (skilled manpower) andin general shift for day to day maintenance work related to masonry work as and when required as per instruction of EIC. |
| 3 | Deploymentof 1 (one) no. carpenter (skilled manpower) and in general shift for day to day maintenance work related to carpentary work like repairing of door, window, fixing of door and window fittings as and when required as per instruction of EIC. |
| 4 | Deployment 01 (one) Plumber (skilled manpower) for day to day maintenance works related with plumbing works in General Shiftas per instruction of Engineer-in-charge. |
| 5 | Deployment 03 (three)(unskilled mapower) for miscellaneous works as per instruction of Engineer-in-charge or FM. |
| 6 | Deployment 02 (two) sweeper(unskilled mapower) for day to day sanitary maintenance works jobs as per instruction of Engineer-in-charge.in general shift |
| 7 | Deploymentof 1 (one) no. Skilled 1 (un skilled) manpowerfor day to day operation and maintenance related works related to R.O Plant fi in general shift & 1st shift as per instruction of EIC. |
| 8 | Collection and disposal of garbage and other refuses from different locations in the colony area, road side flanks etc. including loading, unloading and disposing the same to any distance as per instruction of EIC. |
| 9 | Cleaning of drain including removal of earth, silt, dirts and other refuses and disposal of same at a specified place outside the colony premises as per direction of EIC with all lead and lift. Upto 300 mm width. |
| 10 | Cleaning of drain including removal of earth, silt, dirts and other refuses and disposal of same at a specified place outside the colony premises as per direction of EIC with all lead and lift. Above 300 mm width & upto 600 mm width. |
| 11 | Cleaning of drain including removal of earth, silt, dirts and other refuses and disposal of same at a specified place outside the colony premises as per direction of EIC with all lead and lift. Above 600 mm width. |
| 12 | Cleaning and desilting of septic tank including removal and refixing of cover slab, removal and disposal of the sludgewith all lead as per instruction of EIC including hire charge & running cost of machinaries, labour etc all complete. |
| 13 | Regular cutting of bushes, grass,vegetations of open area arround the block and berm with grass cutting machine (Operation based on Petrol) to required shape and stacking of grasses to a lead of 50.00 m and lift of 1.5m. |
| 14 | Cleaning and sweeping of all types of roads with labours, tools & plants and removing the same otside the colony areas. (All Roads to cleaned and sweeped once in a week on regular basis.) |
| 15 | Fooging with smoker mixed with diesel @ 8 ml smoker with one litre of diesel twice per month as per direction of Engineer-in-charge (treatment to be done using spray machine along with proper safety provisions for sprayer like mask etc). |
| 16 | General pest control with Malathion 50% EC and Nuvan 75% EC (2 ml Malathion & 6 ml Nuvan to be mixed with 1 litre water) for inddor as well as outdoor treatment once in a month as per direction of Engineer-in-charge. (Treatment to be done using spray machine along with proper safety provisions like mask etc.) |
| 17 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m: All kinds of soil. |
| 18 | Surface dressing of the ground including removing vegetation and in- equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m. All kinds of soil |
| 19 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. |
| 20 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) |
| 21 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size) |
| 22 | Centering and shuttering including strutting, propping etc. and removal of form work for : Foundations, footings, bases for columns |
| 23 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 24 | Centering and shuttering including strutting, propping etc. and removal of form for : Suspended floors, roofs, landings, balconies and access platform |
| 25 | Providing, hoisting and fixing up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but excluding cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 26 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars |
| 27 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars |
| 28 | Brick work withcommon burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1cement : 6coarse sand) |
| 29 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1cement : 6 coarse sand) |
| 30 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in : cement mortar 1:4 (1cement : 4coarse sand) |
| 31 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1cement : 4coarse sand) |
| 32 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shadeArea of slab over 0.50 sqm |
| 33 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).Kiln seasoned and chemically treated hollock wood |
| 34 | Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 35 | Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws |
| 36 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding |
| 37 | Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer- in-Charge. |
| 38 | Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture . M.S. frame covered with 5 mm thick heat moulded PVC \"C\" channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the \"C\" Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer\"s specification & drawing. 30 mm thick plain PVC door shutters |
| 39 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 40 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 41 | Welding by gas or electric plant including transportation of plant at site etc. complete. |
| 42 | Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides |
| 43 | Cement concrete flooring 1:2:4 (1cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate |
| 44 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineerin-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 45 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1cement : 4coarse sand), including pointing the joints with white cement and matching pigment etc., complete. |
| 46 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of Tile 600x600 mm |
| 47 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gm/ m² |
| 48 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, Single socketed pipes. 110 mm diameter |
| 49 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Single tee with door 110x110x110 mm |
| 50 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Single tee without door 110x110x110 mm |
| 51 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Bend 87.5° 110 mm bend |
| 52 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Shoe (Plain) 110 mm Shoe |
| 53 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length,including cutting brick work and fixing in cement mortar 1:4 (1 cement: 4 coarse sand) and making good the wall etc. complete. 110 mm |
| 54 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer- in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 55 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm) |
| 56 | 12 mm cement plaster of mix : 1:4 (1cement : 4 fine sand) |
| 57 | 12 mm cement plaster of mix : 1:6 (1cement : 6fine sand) |
| 58 | Neat cement punning |
| 59 | 6 mm cement plaster of mix : 1:3 (1cement : 3 fine sand) |
| 60 | White washing with lime to give an even shade : Old work (two or more coats) |
| 61 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer’s specification. Two or more coats on new work |
| 62 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer |
| 63 | Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) |
| 64 | Applying priming coat : With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 65 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work |
| 66 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 67 | Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade : Old work (one or more coats) |
| 68 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) |
| 69 | Renewing bottom rail and/or top runner of collapsible gate including making good all damages and applying priming coat of zinc chromate yellow primer of approved brand and manufacturer. |
| 70 | Renewing Wrought iron or M.S. Wheel or roller of steel door or gate and fitting and fixing the same with necessary clamps, nuts and bolts/welding and erection etc. complete. Wheel 50 mm dia and below |
| 71 | Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like. |
| 72 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete |
| 73 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work |
| 74 | Finishing walls with water proofing cement paint of required shade : Old work (one or more coats @ 2.20 kg/10 sqm) |
| 75 | Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (One or more coat applied @ 0.90 ltr/10 sqm). |
| 76 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. |
| 77 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar |
| 78 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below |
| 79 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : Of area 3 sq. metres and below |
| 80 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 81 | Supplying and stacking at site. Good earth |
| 82 | Supplying and stacking at site. Moorum |
| 83 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap |
| 84 | Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required : White glazed fire clay kitchen sink of size 600x450x250 mm |
| 85 | Providing and fixing white vitreous china water closet squatting pan (Indian type) : Orissa pattern W.C. pan of size 580x440 mm |
| 86 | Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat & lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40 mm flush bend, 20 mm over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : White vitreous china dual purpose WC pan with white solid plastic seat and lid with white vitreous china flushing cistern and C.P. flush bend. |
| 87 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall : 15 mm nominal outer dia Pipes |
| 88 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall : 20 mm nominal outer dia Pipes |
| 89 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall : 25 mm nominal outer dia Pipes |
| 90 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. : 15 mm nominal outer dia Pipes |
| 91 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. : 20 mm nominal outer dia Pipes |
| 92 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge. External work : 20 mm nominal outer dia Pipes |
| 93 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge. External work : 25 mm nominal outer dia Pipes |
| 94 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work : 25 mm dia nominal bore |
| 95 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work : 40 mm dia nominal bore |
| 96 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work : 50 mm dia nominal bore |
| 97 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work : 80 mm dia nominal bore |
| 98 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 99 | Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 100 | Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan. |
| 101 | Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account). |
| 102 | Cleaning and desilting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer-incharge. |
| 103 | Hacking of CC flooring including cleaning for surface etc. complete as per direction of the Engineer-in-Charge. |
| 104 | Carriage of material by mechanical transport including loading, unloading and stacking: Lime, moorum, building rubbish with one km lead. |
| 105 | Supply of 20 mm nominal size stone aggregate as per instruction of EIC. |
| 106 | Supply of 10 mm nominal size stone aggregate as per instruction of EIC. |
| 107 | Supply of cement of 50 kg bag of approved brand as per instruction of EIC. |
| 108 | Supply ofBrass hasps and staples (safety type) 150 mm as per instruction of EIC. |
| 109 | Supply ofChromium plated Brass screws 25 mmas per instruction of EIC. |
| 110 | Supply of Chromium plated Brass curtain rod 20 mm dia 1.25 mm thick as per instruction of EIC. |
| 111 | Supply of C.P. Brass Extension Nipple (1/2\"x2\" size) of approved make and quality as per instruction of EIC. |
| 112 | Supply ofBright finished or black enameled mild steel bolts and nuts 50x6 mm as per instruction of EIC. |
| 113 | Supply ofISI marked Oxidised mild steel butt hinges 125x65x2.12 mm as per instruction of EIC. |
| 114 | Supply ofISI marked Oxidised mild steel butt hinges 100x58x1.90 mm as per instruction of EIC. |
| 115 | Supply ofISI marked Oxidised mild steel butt hinges 75x47x1.70 mm as per instruction of EIC. |
| 116 | Supply ofISI marked Oxidised mild steel sliding door bolt 300x16 mm as per instruction of EIC. |
| 117 | Supply ofISI marked Oxidised mild steel sliding door bolt 250x16 mm as per instruction of EIC. |
| 118 | Supply ofISI marked Oxidised mild steel tower bolt (barrel type) 200x10 mm as per instruction of EIC. |
| 119 | Supply ofISI marked Oxidised mild steel tower bolt (barrel type) 150x10 mm as per instruction of EIC. |
| 120 | Supply ofISI marked Oxidised mild steel tower bolt (barrel type) 100x10 mm as per instruction of EIC. |
| 121 | Supply ofISI marked Oxidised mild steel handles 125 mm as per instruction of EIC. |
| 122 | Supply of Oxidised mild steel screws 30 mm as per instruction of EIC. |
| 123 | Supply of Oxidised mild steel screws 25 mm as per instruction of EIC. |
| 124 | Supply ofISI marked Anodised Aluminium butt hinges 100x63x4 mm as per instruction of EIC. |
| 125 | Supply of aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :250x16 mm |
| 126 | Supply of aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :250x10 mm |
| 127 | Supply ofISI marked Anodised Aluminium tower bolt (barrel type) 100x10 mm as per instruction of EIC. |
| 128 | Supply ofISI marked Anodised Aluminium handles 125 mm with plate 175 x 32 mm as per instruction of EIC. |
| 129 | Supply of Coarse sand (zone III) as per instruction of EIC. |
| 130 | Supply of Fine sand (zone IV) as per instruction of EIC. |
| 131 | Supply of Wire nails as per instruction of EIC. |
| 132 | Supply of Bleaching powder of approved quality as per instruction of EIC. |
| 133 | Supply ofMirror of superior make glass 60x45 cm as per instruction of EIC. |
| 134 | Supply of Pig lead of approved quality as per instruction of EIC. |
| 135 | Supply ofG.I. Union 15 mm nominal bore as per instruction of EIC. |
| 136 | Supply ofG.I. Union 20 mm nominal bore as per instruction of EIC. |
| 137 | Supply ofG.I. Union 25 mm nominal bore as per instruction of EIC. |
| 138 | Supply ofG.I. Union 50 mm nominal bore as per instruction of EIC. |
| 139 | Supply ofUnplasticised P.V.C. connection pipe with brass union 30 cm long 15 mm bore as per instruction of EIC. |
| 140 | Supply ofUnplasticised P.V.C. connection pipe with brass union 45 cm long 15 mm bore as per instruction of EIC. |
| 141 | Supply of White plastic seat (solid) with lid C.P. brass hinges and rubber buffers of approved make and quality as per instruction of EIC. |
| 142 | Supply ofShower rose C.P.brass of approved quality for 15 to 20 mm inlet 100 mm dia as per instruction of EIC. |
| 143 | Supply of 20 mm dia Gunmetal gate valve with wheel as per instruction of EIC. |
| 144 | Supply of Brass full way valve with C.I. wheel (screwed end) 25 mm dia as per instruction of EIC. |
| 145 | Supply of Brass full way valve with C.I. wheel (screwed end) 40 mm dia as per instruction of EIC. |
| 146 | Supply of Brass full way valve with C.I. wheel (screwed end) 50 mm dia as per instruction of EIC. |
| 147 | Supply of C.P. brass waste 32 mm of approved make and quality as per instruction of EIC. |
| 148 | Supply of aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade as per direction of EIC. Single rubber stopper as per instruction of EIC. |
| 149 | Supply of 600x120 mm glass shelf with anodised aluminium angle frame, C.P. brass brackets and guard rail of standard size as per instruction of EIC. |
| 150 | Supply of Chromium plated brackets for curtain rods 20 mm dia as per instruction of EIC. |
| 151 | Supply of Oxidised mild steel screws 35 mm as per instruction of EIC. |
| 152 | Supply of Stainless Steel A ISI 304 (18/8) kitchen sink as per IS : 13983 with C.I. brackets and stainless steel plug 40 mm,including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink without drain board 610x460 mm bowl depth 200 mm as per instruction of EIC. |
| 153 | Supply of Hard board 6 mm thick as per instruction of EIC. |
| 154 | Supply of Flexible (coil shaped) PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c PVC waste fittings as per instruction of EIC. |
| 155 | Supply of Flexible (coil shaped) PVC waste pipe for sink and wash basin 40 mm dia with length not less than 700 mm i/c PVC waste fittings as per instruction of EIC. |
| 156 | Supply of C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore as per instruction of EIC. |
| 157 | Supply of C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore as per instruction of EIC. |
| 158 | Supply of C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore as per instruction of EIC. |
| 159 | Supply of C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931: 15 mm nominal bore 15 mm nominal bore as per instruction of EIC. |
| 160 | Supply of Flushing Cistern P.V .C. 10 litre capacity (low level) (White) (with fittings, accessories and flush pipe) of approved quality and make as per instruction of EIC. |
| 161 | Supply of PTMT bib cock of approved quality and colour. 15 mm nominal bore, 86 mm long, weighing not less than 88 gms as per instruction of EIC. |
| 162 | Supply of PTMT pillar cock of approved quality and colour. 15 mm nominal bore as per instruction of EIC. |
| 163 | Supply of PTMT grating of approved quality and colour. Circular type : 100 mm nominal dia as per instruction of EIC. |
| 164 | Supply of PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 gms as per instruction of EIC. |
| 165 | Supply ofPTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball 15 mm nominal bore, 152mm long, weighing not less than 440 gms as per instruction of EIC. |
| 166 | Supply of PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. 25 mm nominal bore, 152mm long, weighing not less than 440 gms as per instruction of EIC. |
| 167 | Supply of Fly ash lime bricks (FALG Bricks) conforming to I.S 12894 as per instruction of EIC |
| 168 | Supply of P.T.M.T. extension nipple 15 mm as per instruction of EIC. |
| 169 | Supply of P.T.M.T. extension nipple 20 mm as per instruction of EIC. |
| 170 | Supply of P.T.M.T. extension nipple 25 mm as per instruction of EIC. |
| 171 | Supply of Stainless steel screws 50 mm as per instruction of EIC. |
| 172 | Supply of Stainless steel screws 40 mm as per instruction of EIC. |
| 173 | Supply of Stainless steel screws 30 mm as per instruction of EIC. |
| 174 | Supply of Stainless steel screws 20 mm as per instruction of EIC. |
| 175 | Supply of Stainless steel butt hinges (heavy weight) 125x64x2.5 mm IS :12817 marked as per instruction of EIC. |
| 176 | Supply of Chlorinated Polyvinyl Chloride (CPVC) pipes: 15 mm nominal outer dia of approved make and quality as per instruction of EIC. |
| 177 | Supply of Chlorinated Polyvinyl Chloride (CPVC) pipes: 20 mm nominal outer dia of approved make and quality as per instruction of EIC. |
| 178 | Supply of Chlorinated Polyvinyl Chloride (CPVC) pipes: 25 mm nominal outer dia of approved make and quality as per instruction of EIC. |
| 179 | Supply of Chlorinated Polyvinyl Chloride (CPVC) pipes: 40 mm nominal outer dia of approved make and quality as per instruction of EIC. |
| 180 | Supply of Chlorinated Polyvinyl Chloride (CPVC) pipes: 50 mm nominal outer dia of approved make and quality as per instruction of EIC. |
| 181 | Supply of Chlorinated Polyvinyl Chloride (CPVC) pipes: 75 mm nominal outer dia of approved make and quality as per instruction of EIC. |
| 182 | Supply of CP brass towel rail 25 mm dia 450 mm long of approved quality as per instruction of EIC. |
| 183 | Supply of approved quality brass spindle and valve of stop cock/bib cock/push cock/pillar 15 mm as per instruction of EIC. |
| 184 | Supply of hand shower (health faucet) (ABS body) 15 mm nominal size with 1 metre long easy flex tube in chrome finish and wall hook JAQUAR make (Model No. ALD-CHR-579) or its equivalent all complete as per instruction of EIC. |
| 185 | Supply of 15 mm dia CP pillar cock of approved quality JAQUAR make (Model CON-CHR-011KN) or its equivalent as per instruction of EIC. |
| 186 | Supply of 2 way bib cock 15 mm nominal size with wall flange JAQUAR make (Model No. LYR-CHR-38041) or its equivalent as per instruction of EIC. |
| 187 | Supply of Chromium platedbrass wall Mixture without spot with provision for connection for telephone shower and exposed pipe for over head shower JAQUAR make (Model No. CQT-CHR-23273UPR) or its equivalent) as per instruction of EIC. |
| 188 | Supply of Chromium plated brass centre hole basin Mixture with regular spot without popup waste system with 450 mm long braided hosesJAQUAR make (Model No. CQT-CHR-23167B) or its equivalent) as per instruction of EIC. |
| 189 | Supply of PVC flush pipe 50 mm for low level cistern of approved brand as per instruction of EIC. |
| 190 | Supply of PVC Schedule 80 (medium duty) conforming to ASTMD - 1785as per IS : 1239 (Part - I). Elbow15 mm dia as per instruction of EIC. |
| 191 | Supply of PVC Schedule 80 (medium duty) conforming to ASTMD - 1785as per IS : 1239 (Part - I). Elbow20 mm dia as per instruction of EIC. |
| 192 | Supply of PVC Schedule 80 (medium duty) conforming to ASTMD - 1785as per IS : 1239 (Part - I). Elbow25 mm dia as per instruction of EIC. |
| 193 | Supply of PVC Schedule 80 (medium duty) conforming to ASTMD - 1785as per IS : 1239 (Part - I). Socket15 mm dia as per instruction of EIC. |
| 194 | Supply of PVC Schedule 80 (medium duty) conforming to ASTMD - 1785as per IS : 1239 (Part - I). Socket20 mm dia as per instruction of EIC. |
| 195 | Supply of PVC Schedule 80 (medium duty) conforming to ASTMD - 1785as per IS : 1239 (Part - I). Socket25 mm dia as per instruction of EIC. |
| 196 | Supply of PVC Schedule 80 (medium duty) conforming to ASTMD - 1785as per IS : 1239 (Part - I). Nipple: 75 mm long 15 mm dia asper instruction of EIC. |
| 197 | Supply of PVC Schedule 80 (medium duty) conforming to ASTMD - 1785as per IS : 1239 (Part - I). Nipple: 75 mm long 20 mm dia asper instruction of EIC. |
| 198 | Supply of PVC Schedule 80 (medium duty) conforming to ASTMD - 1785as per IS : 1239 (Part - I). Nipple: 75 mm long 25 mm dia asper instruction of EIC. |
| 199 | Supply of PVC Schedule 80 (medium duty) conforming to ASTMD - 1785as per IS : 1239 (Part - I). Nipple: 100 mm long 15 mm dia asper instruction of EIC. |
| 200 | Supply of PVC Schedule 80 (medium duty) conforming to ASTMD - 1785as per IS : 1239 (Part - I). Nipple: 100 mm long 20 mm dia asper instruction of EIC. |
| 201 | Supply of PVC Schedule 80 (medium duty) conforming to ASTMD - 1785as per IS : 1239 (Part - I). Nipple: 100 mm long 25 mm dia asper instruction of EIC. |
| 202 | Supply of PVC Schedule 80 (medium duty) conforming to ASTMD - 1785as per IS : 1239 (Part - I). Reducing Socket : 20 mm x15 mm as per instruction of EIC. |
| 203 | Supply of PVC Schedule 80 (medium duty) conforming to ASTMD - 1785as per IS : 1239 (Part - I). Reducing Socket : 25 mm x15 mm as per instruction of EIC. |
| 204 | Supply of CPVC / PVC:Solvent Cement as per instruction of EIC. 250 ml Pack |
| 205 | Supply of CPVC Schedule 80 (medium duty) conforming to ASTMD - 1785as per IS : 1239 (Part - I). Tee : 25 mm x 25 mm x 15 mm as per instruction of EIC. |
| 206 | Supply of CPVC Schedule 80 (medium duty) conforming to ASTMD - 1785as per IS : 1239 (Part - I). Tee : 20 mm x 20 mm x 15 mm as per instruction of EIC. |
| 207 | Supply of Polyethylene water storage tank cover and suitable locking arrangement as per instruction of EIC. |
| 208 | Supply of Phnyle of approved brand in bottle as per instruction of EIC. |
| 209 | Supply of Napthalline balls as per instruction of EIC. |
| 210 | Supply of Room freshner 50 gram pack of approved brand as per instruction of EIC. |
| 211 | Supply of brass C.I. sluice valves (with cap) complete with bolts, nuts,rubber insertions etc as per approved quality: 100 mm dia as per instruction of EIC.CLASS II |
| 212 | Supply of brass C.I. sluice valves (with cap) complete with bolts, nuts,rubber insertions etc as per approved quality: 150 mm dia as per instruction of EIC.CLASS II |
| 213 | Supply of Alum as per instruction of EIC. |
| 214 | Supply of Liquid Chlorine as per instruction of EIC. |
| 215 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. Group A |
| 216 | Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. 5/6 amps switch. |
| 217 | Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. 15/16 amp switch |
| 218 | Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. 3 pin 5/6 amp socket outlet |
| 219 | Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. 6 pin 15/16 amp socket outlet |
| 220 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator): 4 way (4 + 12), Double door |
| 221 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator): 6 way, Double door |
| 222 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator): 12 way, Double door |
| 223 | Supplying and fixing following rating, four pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required: 100 amps |
| 224 | Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required: 63 amps |
| 225 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, \"C\" curve,miniaturecircuitbreakersuitableforinductiveload offollowing poles in the existing MCB DB complete with connections,testing and commissioning etc. as required: Single pole |
| 226 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire. |
| 227 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire. |
| 228 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 4 sq. mm + 1 X 4 sq. mm earth wire. |
| 229 | Supplying and fixing PVC batten/ angle Folder including connection etc. as required. |
| 230 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 231 | Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required. |
| 232 | Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc asrequired. |
| 233 | Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. |
| 234 | Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. Upto 450 mm sweep. |
| 235 | Supplying & fixing suitable size GI box wiF modular plate and cover in front on surface or in recess i/c providing and fixing 25 amp modular socket outlet and 25 Amps modular SP MCB, “C” curve including connection, painting etc. as required. |
| 236 | Supplying and fixing metal box of 150mm X 75mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in FRLSont including providing and fixing 3 pin 5/6 amps socket outlet and 5/6 amps piano type switch, connection, painting etc. as required. (For light plugs to be used in non residential buildings). |
| 237 | Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 amps socket outlet and 15/16 amps piano type switch, connection, painting etc. as required. |
| 238 | Supplying,installing,testingandcommissioning offollowing capacity TPN tap off box made of 1.6mm thick sheet steel enclosuredulypaintedwithpowdercoatingonexisting rising mainscompletewithTPN disconnector FSU and FRC fuses, connections, earthing etc. asrequired: 100 A amps TPN |
| 239 | Supply of new LED tube light set complete of approved make in all respect 20watt as per instruction of EIC. |
| 240 | Supply of 10 sq. mm. aluminium conductor twin core stranded PVC wire of approved make as per instruction of EIC. |
| 241 | Supply of exhaust fan 4 blade single phase of approved make ISI marked as per instruction of EIC.. |
| 242 | Supply of new LED lamp09watt of approved make as per instruction of EIC. |
| 243 | Deployment of electrical helper for rectification of electrical faults in general shift (One manpower each to be deployed in general shift). |
| 244 | Fixing of street light/ flood light on top of any type of pole or masonary structure with materials supply like bend, clamp, nuts, bolts,etc as required as per instruction of EIC. |
| 245 | Repairing of ceiling fan / exhaust fan / stand fan/ wall fan of any size with rewinding, replacement of bearing, condensor, bobin bush and shaft macheningr etc. all complete job. |
| 246 | Supply of gyser element of approved make as per instruction of EIC. |
| 247 | Supply of Fan condensor 2.5 mfd of approved make as per instruction of EIC. |
| 248 | Supply of PVC tape size 1.80 cm x 25.00 metre of approved make as per instruction of EIC. |
| 249 | Supply of 1.5 sq. mm ISI marked, FRLS PVC insulated, single core copper conductor cable of approved make as per instruction of EIC. |
| 250 | Supply of 4 sq. mm ISI marked, FRLS PVC insulated, single core copper conductor cable of approved make as per instruction of EIC. |
| 251 | Supply of PVC casing 3/4 inch size of approved make and ISI marked as per instruction of EIC. |
| 252 | Supply of 15 AMP. 5 in 1 combined switch socket unit ISI marked of approved make as per instruction of EIC. |
| 253 | Supply of 3 pin top 5/6 Amp. ISI marked of approved make as per instruction of EIC. |
| 254 | Supply of 3 pin top 15/16 Amp. ISI marked of approved make as per instruction of EIC. |
| 255 | Supply of MS nut & bolt with washers of different sizes of approved make as per instruction of EIC. |
| 256 | Total impact of GST for the purpose of CTC |
AI Tender Summary
Tender Timeline
Aug 03, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedAug 20, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 22, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender