|
| 1 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 2 | Front, Back and side wall play area below line marking: providing and laying hard plaster of minimum thickness 12 mm, as per approved standards and specification of WSF including games line marking in required colours for the wall of Squash courts. The wall to be finished by a coat of primer and two coats of high quality washable acrylic paint, complete as per WSF specification and as per direction of Engineer-in-charge. The plaster and paint both should be WSF (World Squash Federation) approved. |
| 3 | Providing and fixing sound board 480 mm high above finished floor level and 6400 mm long with wall mounting thickness of 50 mm made of painted/powder coated 2 mm thick a aluminium sheet as per international standards. The upper 50 mm shall not project in to court by not more than 15 mm at the top and 45 mm at the bottom and shall be so as to deflect any ball striking it. All edges of the boards shall be rounded and shall be constructed in such a manner so as to make a distinctive noise when struck by the ball etc. complete as per the direction of Engineer-in charge. |
| 4 | Providing and fixing of 20mm (thickness) x 57mm/83(width) imported Hard Maplewood tounge and grooved planks- WSF approved supported by pine/spruce/for padded runners duly treated with wood life anti treatment of section 63.5mm x 38 mm placed with distance between the runner to be 9\" along the runner for shock absorption. A vapor barrier will also be introduced between sub floor and frame work. The phase machine grinding, joint sealing with french chalk and sanding sealer followed by polishing with polyurethane finish (of WSF approved manufacture/flooring system). Also, the work includes painting of game lines in required colours/dimensions and anti-termite treatment of concrete floor base (anti termite work for outer walls shall be paid separtely). |
| 5 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete |
| 6 | Griding & polishing maple wood flooring with 3 phase machine grinding using 36,60 and 120 grid abrasives with special drum sanders followed by base preparation with French chalk and WP-4 sealant (approved quality) and finally finishing with oil modified approved top coat with WP - 1 (approved quality) in accordance with WEMA and FIBA norms etc. complete as per direction of Engineer-in-charge. |
| 7 | Providing and fixing 12mm thick frameless toughened squash court glass doors shutter of approved brand and manufacture including providing and fixing top & bottom plvot & double action hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required doors fittings all complete as per direction of Engineer-in-charge. The rate shall include the providing & fixing of suitable Doors, handle, lock and stopper etc. |
| 8 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.With cement mortar 1:4 (1 cement : 4 fine sand) |
| 9 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 10 | Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work |
| 11 | Finishing walls with textured exterior paint of required shade : Old work (Two or more coats on existing cement paint surface applied @ 3.28 ltr/10 sqm. |
| 12 | Providing and fixing double scaffolding system (cup lock type) onthe exterior side of building/structure, upto 25 metre height, aboveground level, including additional rows of scaffolding in stepped manneras per requirement of site, made with 40mm dia M.S. tube, placed1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with M.S. Tubes, M.S. tube challis, M.S. clamps andstaircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approvalof Engineer-in-charge.Note:- (1) The elevational area of the scaffolding shall be measured for payment purpose. (2) The payment will be made once only for execution of all items for such works. |
| 13 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. |
| 14 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 15 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) |
| 16 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 17 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick |
| 18 | Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab. |
| 19 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work |
| 20 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm |
| 21 | Manufacturing, supplying and fixing retro reflective overhead signage boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTM-D-4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC : 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer-incharge.(Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment). Overhead informatory road signage |
| 22 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
