Border Security Force-BSF has published Tender For Electrical Renovation Of 168 Men Barrack At F Coy Of Stc Bsf Cc Pur Manipur. Submission Date for this Tender is 25-08-2022. Electrification Work Tenders in manipur Manipur. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq. mm. FRLS PVC insulated copper conductor single core cable etc. as required. (GROUP-B) |
2 | Wiring for circuit/ submain wiring alongwith earth wire the following sizes FRLS PVC insulated copper conductor, single core cable in surface/ recess medium class PVC conduit as required. (2.1) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
3 | 2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
4 | 4 X 4 sq. mm + 2 X 4 sq. mm earth wire |
5 | 2 X 6 sq. mm + 1 X 6 sq. mm earth wire |
6 | Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required. (a) 200 mm X 250 mm X 60 mm deep (For DB loose wire box) |
7 | Supplying and fixing metal box of 200 mm X 125 mm X 60 mm deep size (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required. |
8 | Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. (5.1) 5/6 A switch |
9 | 3 pin 5/6 A socket outlet |
10 | Supplying and fixing metal box of 180 mm X 100 mm X 60 mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 A & 15/16 A socket outlet and 15/16 A piano type switch, connections, painting etc. as required. |
11 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
12 | Supplying and fixing 3 pin 5 amps Ceiling rose on the existing junction box/ wooden block including connection etc. as required. |
13 | Supplying and fixing PVC batten/ angle holder including connections etc. as required. |
14 | Supplying and fixing of 4 way (4+12), Double door surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required. |
15 | Supplying and fixing 16 way, Double door, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) |
16 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of single pole in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
17 | Supplying and fixing 40 Amp rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
18 | Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/coke and salt as required. |
19 | Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation andre-filling as required. |
20 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required. |
21 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required. |
22 | Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required. |
23 | Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 Nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required. |
24 | Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or on surface of wall for lightning conductor complete as required. (For horizontal run) |
25 | Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or on surface of wall for lightning conductor complete as required. (For vertical run) |
26 | Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required. |
27 | Providing, laying and fixing 50 mm dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep) and re-filling etc. as required |
28 | Supplying and making end termination with brass compression gland and aluminium lugs for 3.5 X 50 sq. mm (35 mm) size of PVC insulated and PVC sheathed/ XLPE aluminium conductor cable of 1.1 KV grade as required. |
29 | Supplying and laying of one number PVC insulated and PVC sheathed/ XLPE, galvanised steel strip armoured power cable of 1.1 KV grade ISI marked of 3.5 x 50 sq. mm size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. (Havells make or its equivalent to KEI/HPL/Polycab make) |
30 | Supplying and fixing of one number PVC insulated and PVC sheathed/ XLPE, galvanised steel strip armoured aluminium power under ground cable of 1.1 KV grade of 3.5 x 50 sq. mm size on wall/surface/in pole as required. (Havells make or its equivalent to KEI/HPL/Polycab make) |
31 | Supply and fixing of 20 watt LED tubelight of ultra slim round profile with extruded polycarbonate and all internal accessories including connection, testing etc. complete as required. (E-Lite LED Pride Plus, Cat. No. LHEXBLP7PN1W020 Havells make or its equivalent to Philips/Bajaj/CG/C&S make) |
32 | Supply and fixing of 10 watt inverter batten/ emergency LED tubelight of square shape and polycarbonate channel with integrated lithium ion battery and electronic driver having backup time upto 2 to 4 hours including connection, testing etc. complete as required. (Pride Plus Inverter Batten, Cat. No. LHEXACP7FN1W010 Havells make or its equivalent to Rashmi/Philips/Bajaj/CG make) |
33 | Supply, installation, testing and commissioning of 1200 mm ceiling fan suitable for operation on 230 Volt, 50 Hz including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required. (USHA Model Apollo LX/ Swift alpha or it"s equivalent to Havells/CG/Bajaj/Orient make) |
34 | Supply and installation 300 mm metal exhaust fan of light duty motor with protective bird guard and louvers shutters complete with frame in the existing opening, including, making good the damage, connection, testing, commissioning etc. as required. (Model No. Aeroclean LD GBD of USHA make or its equivalent to Havells/CG/Bajaj/Orient make) |
35 | Providing and fixing 25 watt LED street light luminaire IP66 Protection, heat resistant toughened glass with frame, pressure dia cast aluminium housing, better optics for uniform distribution with the help of 1.5 mtr long 32 mm dia GI pipe medium duty suitably bent to the require shape with clamp, nuts and bolts including connectionwith 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. (Endura Pearl Plus Cat. No. ENDURAPEARLSL25WLED 757SASYTOPCMP Havells make or its equivalent to Philips/CG/Bajaj/Orient/C&Smake) |
36 | Supply and fixing of 10 watt LED bulkhead made up of polycarbonate material with electronic driver including connection, testing etc. complete as required. (Stud, Cat. No. LBHP-10-CDL CG make or its equivalent to Havells/Philips/Bajaj/C&S/Orient make) |
37 | Supply and fixing LED bulb/ lamp of 10 watt LED bulb ball shape, B-22 pin base cap with polycarbonate body and aluminium heat sink in existing holder etc. complete as required. (Havells/Philips/Bajaj/CG/Orient/C&S make) |
38 | Supplying and fixing 3 pole, 100 Amp, 415 V, 50 Hz, 18 kA braking capacity MCCB suitable for inductive load in the existing vertical type TPN MCB DB complete with connections, testing and commissioning etc. as required. (Model : DU100D, Cat. No. CM90517OOKO of L&T make or its equivalent to Simens/Indoasian/Legrand/ Schnidner/Havells make) |
39 | Supplying and fixing 63 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of Double pole in the existing MCB DB complete with connections, testing and commissioning etc. as required. (Cat. No. BB20630C of L&T make or its equivalent to Simens/Indoasian/Legrand/ Schnidner/Havells make) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail