Construction Of Urvarit Work Shivdahini Building At Ale Tal Junnar Dist Pune
Tender Value
12.39 Lakhs
Estimated cost
Bid Submission
10 Aug 2022
0 days left
EMD
12397
Bank guarantee accepted
Document Fee
1120
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
junnar → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Urvarit Work Shivdahini Building At Ale Tal Junnar Dist Pune
BOQ
| Sl. No. | Item Description |
| 1 | ITEM NO 1 : Providing internal cement plaster 12 mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces in all position including scaffolding and curing etc complete... (INo32-04, PgNo153) |
| 2 | ITEM NO 2 : Providing neeru finish to plastered surfaces in all positions including scaffolding and curing etc. complete ...(INo32-15, Pg No 153) |
| 3 | ITEM NO 3 : Providingrough cast cement plaster externally in two coats with coloured cement finish to concrete/ brick/ stone masonry surfaces in all positions with base coat of 12 to 15 mm thick in C.M. 1:4 using gray cementand rough cast treatment 12 mm thick in proportion 1:1 1/2:3 using colour pigmentincluding scaffolding and fourteen days curing complete... (INo32-13, PaNo 153) |
| 4 | ITEM NO 4 : Providing and fixing green marble of 18 to 20 mm thick for door frame/dado/window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary , curing, etc. complete…(INo33-48, PgNo 160) |
| 5 | ITEM NO 5 : Providing and fixing in position ( as per 1868/1982) Aluminium sliding window of three tracks with rectangula pipe 95 x 38.10 x 0.90 mm at weight 0.637 kg/rmt with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 kg/Rmt. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kg/Rmt the shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt innter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt and handle and top section 40 x 18 x 1.25 mm at weight 0.417 kg rmt. as per detailed drawings and as directed by enginner in charge with all necessary Aluminium sections fixtures and fasternings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass adn aluminiummosquito net shutter with stainless steeljail with all required screws and nuts etc complete with powder coating without box... (INo39-44, Pg No 185) |
| 6 | ITEM NO 6 : Providing and fixing mild steel grill work for windows ventilators etc 15kg/sqm as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete... (INo40-02, Pg No 192) |
| 7 | ITEM NO 7 : Providing and laying polished Tandur Stone flooring 25mm to 30mm thick required widthin plain/diamond pattern on a bed of 1:6 C.M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete...(INo33-05, PgNo 156) |
| 8 | ITEM NO 8 : Providing and laying chequered tiles of approved quality of size 30 cm x 30 cm for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. Complete…(INo33-66, PgNo 161) |
| 9 | ITEM NO 9 :Providing and fabricating structural steel work in rolled sections like joists, chanels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting fixing in position making riveted / bolted / welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete(INo23-01, PgNo 129) |
| 10 | ITEM NO 10 :Providing and fixing rolling shuttre fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with35x 35 x 5 mm angle sections fitted with sliding bolts and handles for both sides, deep M.S. channel sections of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete ( I.S. 6248-1979) (without mechanical gear).....(INo39-24, PgNo 181) |
| 11 | ITEM NO 11 : Providng and laying jointless Polydee-LM, a highly flexible elastometric coating for RCC / cementitious surface for terrace waterproofing on B.B. Coba/ R.C.C. after aplication of Tp-42 Primer on perfectly clean surface ( free from loose dust and foreign matter) application of 1 st coat of Polydee-LM @ 700 gms/sqm and applyiong 2nd coat of Polydee-LM @ 700 gms/sqm and finishing the same with sprinkiling the AG-10 granules on the wet coating. (After finishing covering the treatment with 25 mm cement plaster for protection with fibrillated 6mm Plyplast fibre @ 125 gms/ sqm to be paid in separate item ) covering 7 years guarantee on Court Fee Stamp Paper of 100/- etc. complete(INo31-10, PgNo 151) |
| 12 | ITEM NO 12 : Providing and applying priming coat on concrete/ masonry / Asbestos Cement plastered surfaces including scaffolding if necessary preparing the surface by thoroughly cleaning oil grease dirt and other foreign matter and sand papering as reaquired etc. complete(INo35-21, PgNo 165) |
| 13 | ITEM NO 13 :Providing andapplying pearl/ luster finish paint of approved colour and shade to the existing plaster surface including scaffolding , preparing surface, applying the acrylic wall putti etc.complete(INo35-23, PgNo 165) |
| 14 | ITEM NO 14 : Providing and applying two coats of exterior acralyc emulsion paint confirming to corresponding I.S. of approved manufacture and of approved colour to the plasterd sufaces including cleaning preparing the plaster surface applying primer coat, scaffolding if necessary and watering the surface for two days etc complete(INo35-25, PgNo 165) |
| 15 | ITEM NO 15 : Providingandfixingboarddisplayinginformation,suchas \"Name of work, Tender cost, Name of Contractor, Work completion and liability period etc\", having rectangular shape of 1.20m x 0.90m size made out 18gauge (1.25mm)thick mild steelsheetpaintedwithonecoatofZincchromatestoving primer andtwocoats ofenamelpaintonfrontside andgrey stoveenamelonbacksideandborder/messages/symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles ofsize 35mmx35mmx3mmdulypaintedincludingTwo M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m longpaintedwithalternateblackandwhitebandsof25cm widthincludingallfixturesetc.andfixingtheboardsin1:4:8 concreteblockofsize60cmx60cmx75cmincluding, excavation,refilling,transportation,andlabouretccomplete. Spec. No. As directed by Engineer in Charge ( INo6-36 , PgNo. 47) |
| 16 | ITEM NO 16 : Excavation for foundation in earth,soil of all types,sand gravel and soft murum,including removing the excavated material up to a distance of 50 m.beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming , watering including shoring and strutting etc. complete (lift upto 1.5 m ) By Mechanical Means ... (IN21-02, PgNo 115) |
| 17 | ITEM NO 17 :Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering , preparing the bed for the foundation and nacessary back filling , ramming, watering including shoring and strutting etc. complete(lift upto 1.50 m ) By Mechanical Means ... (INo21-06, PgNo 115) |
| 18 | ITEM NO 18 :Excavation for foundation in Hard rock by chiseling, wedging, line drilling, etc. including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed dewatering and back filling with available earth / murum watering, ramming etc complete ( Lift upto 1.5 m ) By Mechanical Means ... (IN21-20, PgNo 116) |
| 19 | ITEM NO 19 :Providing and laying Castin situ/Ready mixcement concret in M-10 of trap/granite/quartzite/gneiss metal for foundation and bedding including bailing out water, Steel centering , formwork, laying/pumping compacting , roughening them if special finish is to be provided , finishing if required and curing complete. with fully automatic micro processor based PLC WITHOUT SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer ) etc. complete. With fine aggregate (Crushed sand VSI Grade finely washed ) (INo24-01 NS, PgNo 131) |
| 20 | ITEM NO 20 : Providing and laying in situ cement concrete M-30 with tremix treatment for 200mm thickness for Concrete Road is including laying plastic sheet for 125micron thickness with groove cutting of 4mm wide and 20 mm deep with necessary refilling with bitumen (excluding reinforcement )with coarse and fine aggregate (Natural Sand / VSI grade finely washed crushed sand) etc. complete.. ..(INo5-22A, PgNo 38) |
| 21 | ITEM NO 21 :Providing and fixing in position TMT- FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footing ,foundations ,slabs, beams columns, canopies, staircase , newels, chajjas, lintels pardis ,copings, fins, arches etc. as per detailed designs ,drawings and schedules. including cutting , bending , hooking the bars, binding with wires or tack welding and supporting as required complete...(INo26-33 , PgNo 139) |
| 22 | ITEM NO 22 : Royalty Charges forNATURAL SAND . Rate= Royalty + surcharge of 2% + Distt. Mineral Foundation Cess (10%) ( 211.95+4.23+21.19=237.37 Per Cum ) … (INo1-l , PgNo 1) |
| 23 | ITEM NO 23 :MORTOR Compressive Strength (Set of 3 Cubes)…(INo27-VQC, PgNo 426) |
| 24 | ITEM NO 24 :CONCRETE Compressive Strength OF C.C. Cube (Set of 3cubes )…(INo19-VQC, PgNo 426) |
| 25 | ITEM NO 25 :STEEL BAR TESTING Upto 16mm (set of 3 Bars)… (INo77-VQC , PgNo 428) |
AI Tender Summary
Tender Timeline
Aug 03, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedAug 10, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 11, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender