|
| 1 | Excavating in trenches n.exc 1.5m wide and n.exc 1.5m in depth in any type of soil for laying of cable or pipes, trimming the sides, forming bottom surfaces to required level and getting out, complete, all as specified and directed. |
| 2 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick, complete, all as specified and directed. |
| 3 | Removing surplus soil to a distance n.exc 50m and deposited where directed at a level not exceeding 1.50 m above the starting point, complete, all as specified and directed. |
| 4 | S&F in repairs 15 mm bore tubes medium grade galvanised with required all new fitting ISI marked fixed on wall/floor with fixing arrangement including taking up/down old unserviceable tubes, complete all as specified and directed. |
| 5 | S&F in repairs 20 mm bore tubes medium grade galvanised with required all new fitting ISI marked fixed on wall/floor with fixing arrangement including taking up/down old unserviceable tubes, complete all as specified and directed. |
| 6 | S&F in repairs 25 mm bore tubes medium grade galvanised with required all new fitting ISI marked fixed on wall/floor with fixing arrangement including taking up/down old unserviceable tubes, complete all as specified and directed. |
| 7 | S&F in repairs 40 mm bore tubes medium grade galvanised with required all new fitting ISI marked laid in trenches with fixing arrangement including taking up/down old unserviceable tubes, complete all as specified and directed. |
| 8 | S&F in repairs 50 mm bore tubes medium grade galvanised with required all new fitting ISI marked laid in trenches with fixing arrangement including taking up/down old unserviceable tubes, complete all as specified and directed. |
| 9 | S&F in repairs 80 mm bore tubes medium grade galvanised with required all new fitting ISI marked laid in trenches with fixing arrangement including taking up/down old unserviceable tubes, complete all as specified and directed. |
| 10 | S&F in repairs 100 mm bore tubes medium grade galvanised with required all new fitting ISI marked laid in trenches with fixing arrangement including taking up/down old unserviceable tubes, complete all as specified and directed. |
| 11 | S&F in repairs 15 mm bore gun metal globe or gate valve ISI marked with iron wheel head screwed both ends for iron pipes including taking down old unserviceable valve, complete all as specified and directed. |
| 12 | S&F in repairs 20 mm bore gun metal globe or gate valve ISI marked with iron wheel head screwed both ends for iron pipes including taking down old unserviceable valve, complete all as specified and directed. |
| 13 | S&F in repairs 25 mm bore gun metal globe or gate valve ISI marked with iron wheel head screwed both ends for iron pipes including taking down old unserviceable valve, complete all as specified and directed. |
| 14 | S&F in repairs 40 mm bore gun metal globe or gate valve ISI marked with iron wheel head screwed both ends for iron pipes including taking down old unserviceable valve, complete all as specified and directed. |
| 15 | S&F in repairs 50 mm bore gun metal globe or gate valve ISI marked with iron wheel head screwed both ends for iron pipes including taking down old unserviceable valve, complete all as specified and directed. |
| 16 | M&L Mild steel Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways;ailings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete, all as specified and directed. |
| 17 | Supply and fixing in replacement of 80 mm bore cast iron sluice valve class PN-1.0ISI marked, both ends flanged, stainless steel spindle, with iron wheel and necessary jointing materials, nuts & bolts, washers etc for making two flanged joints,complete all as specified and directedMake: Kirloskar/Upadhyaya /Zoloto as approved. |
| 18 | Supply and fixing in replacement of 100 mm bore cast iron sluice valve class PN-1.0ISI marked, both ends flanged, stainless steel spindle, with iron wheel and necessary jointing materials, nuts & bolts, washers etc for making two flanged joints,complete all as specified and directedMake: Kirloskar/Upadhyaya /Zoloto as approved. |
| 19 | Supply and fixing CI foot valve100 mm size including lifting of pipes from sump and replacement of rusted flanges, nuts etc and refixing the same, complete all as specified and directed.Make: Kirloskar/Upadhyaya /Zoloto as approved. |
| 20 | Construction of brick masonry valve pit chamber with 3 mm thick MS sheet cover and 40 x 40 x 6 mm angle iron frame embedded in PCC coping 1:3:6 type C-1 using 20 mm graded stone aggregates with locking arrangements of size 1200 mm x 1200 mm x1200 mm(internal size), depth 500 mm, brick work in cement mortar 1:4 using sub class ‘B’ (old size) bricks, internal walls plastered with 15 mm thick cement mortar 1:4 and finishing the surface even and smooth using extra cement, 40 mm thick PCC 1:3:6 type C-1 using 20 mm graded stone aggregate in coping, PCC 1:4:8 type D-2 using 40 mm graded stone aggregates in foundation 75 mm thick with and including necessary excavation & earth work in soft / loose soil complete all as specified and directed. |
| 21 | Disconnecting and lifting the existing non functional submersible pump sets with dismantling existing bend from non return valve, removing and lifting out submersible pump sets of any description and capacity and in any position alongwith existing column pipe 80mm dia and submesible cable of any size from borewell 150/200mm (approx 30mtr depth of pumpset from GL). |
| 22 | Lowering down the serviceable submersible pump sets of any description and in any position and in any capacity in borewell alongwith the column pipe 80mm dia and submersible cable of any size complete all as directed and making necessary electric connection and testing complete after lowering. |
| 23 | Dismantling and strip opening of submersible pump and motor of any description and in any position, transporting to workshop for servicing, overhauling, cleaning,greasing,removing andreassembling the pump and motor with proper alignment of both pump and motor, fixing in position connecting to existing system and testing at site on full load to the entire satisfaction of the Engr-in-charge for thepumps 20/25 HP, 3 phase, 415volts,50Hz AC Supply.Note :(I)The replacement of defective non functional parts shall be measured and paid for separately under respective item of sch A.(ii) The rate of above item shallbe deemed to include transportation to and from of pump, motor to workshop as approved by Engr-in-charge for necessary repair, alignment and testing of pump and motor at workshop. |
| 24 | Supply only Gun metal bush of submersible motor of capacity 20/25HP, complete all as specified and as directed by Engr-in-charge. |
| 25 | Supply only Rubber bushof submersible motor of capacity 20/25HP, complete all as specified and as directed by Engr-in-charge. |
| 26 | Supply onlyBrass thrust plateof submersible motor of capacity 20/25HP, complete all as specified and as directed by Engr-in-charge. |
| 27 | Supply onlyCI thrust bearingof submersible motor of capacity 20/25HP, complete all as specified and as directed by Engr-in-charge. |
| 28 | Supply onlyCI thrust casing of submersible motor of any description of capacity 20/25HP, complete all as specified and as directed by Engr-in-charge. |
| 29 | Supply only Water seal of submersible motor of any description of capacity 20/25HP, complete all as specified and as directed by Engr-in-charge. |
| 30 | Supply only CI lower/upper housing of shaft of submersible motor of any description of capacity 20/25HP, complete all as specified and as directed by Engr-in-charge. |
| 31 | Supply only Rotor sleeve of submersible motor of any description of capacity 20/25HP, complete all as specified and as directed by Engr-in-charge. |
| 32 | Supply and fix in replacement Coupling set with key of stainless steel parts of submersible pump of20/25 HPcapacity, complete all as specified and as directed. |
| 33 | Supply and fix in replacement Discharge outlet CI of submersible pump of 20/25 HPcapacity, complete all as specified and as directed. |
| 34 | Supply and fix in replacement Stage casing CIof submersible pump of any description 20/25 HPcapacity complete all as specified and as directed. |
| 35 | Supply and fix in replacement Gun metal sand guard of submersible pump of any description 20/25 HPcapacity complete all as specified and as directed. |
| 36 | Supply and fix in replacement Gun metal neck ring of submersible pump of 20/25 HPcapacity, complete all as specified and as directed. |
| 37 | Supply and fix in replacement Gun metal impeller of submersible pump of 20/25 HPcapacity, complete all as specified and as directed. |
| 38 | M&L for repair to impeller of submersible pump of any description by breazing, welding, metalling, turning and polishing ofcapacity 20/25 HP, complete all as specified and as directed. |
| 39 | M&L for rewinding of submersible motor 20/25 HP with PVC insulated copper winding wire of existing size and approved make after taking down burnt winding, cleaning of slots with CTC solution, transportation at site, fixing in position and testing, complete all as specified and as directed. |
| 40 | M&L in replacement for GI Bend suitable for 80 mm bore column pipe heavy duty flanged and drilling at both the ends with having arrangement of mounting pressure gauge, complete all as specified & as directed. |
| 41 | M&L replacement for column pipe 80 mm bore heavy duty ISI marked confirming to IS-1239 for column pipe 3 mtr length, both end flanged, complete all as specified and as directed. Make- Tata/Jindal/Swastik |
| 42 | Dismantling and removing existing non functional 20HP centrifugal pumpsets of any description, dismantling and strip opening,overhauling , cleaning, greasing and replacement of unserviceable/worn out spare parts and reassembling, re installation at site and testing, complete all as specified and as directed.Note :-Replacement of U/S parts will be measured and paid separately under respective item of sch A |
| 43 | M&L for rewinding of centrifugalmotor of any make and capacity 20 HP with super enamelled copper conductor of existing size of approved make after dismantling from foundation, cleaning slots with CTC solution including transportation to workshop and return to site after repair, refixing in position and testing on full load, complete all as specified and as directed. |
| 44 | Supply only CI gland plate set for 20 HP centrifugal pump, complete all as specified. |
| 45 | Supply only Ball bearing for pump/ motor 20 HP, complete all as specified.Make: TATA/SKF/NBC |
| 46 | Supply only CI coupling set flanged type with rubber insertition and suitable bolts of 20 HP centrifugal pump, complete all as specified. |
| 47 | Supply only MS stud with nuts & bolts size 3/8\"X2\"spare parts of 20 HP centrifugal pump, complete all as specified. |
| 48 | M&L for turning and polishing of pump shaft spare parts of 20 HP centrifugal pump, complete all as specified. |
| 49 | Supply onlyCI Impellerof 20 HP centrifugal pump, complete all as specified. |
| 50 | Supply and fixing in replacement of PVC fan including tapping for fixing of fan of booster motor capacity 20 HP, complete all as specified and directed. |
| 51 | Supply and fixing in replacement of MS terminal box with insulated plate and studs booster motor capacity 20 H, complete all as specified and directed. |
| 52 | Cleaning of underground sump, removing sludge / dirt / sand by means of manual wash out, outlet cleaning from inside with bleached water and washing with sodium hydrochloride liquid, drying and applying one coat of lime wash internally and spraying anti bacteria liquid, writing date of cleaning on outer wall of sump with white paint on black base for 45000 litre capacity, complete all as specified and directed. |
| 53 | Cleaning of Steel Over Head Reservoir (OHR) approximately 18 mtr staging, 32000 Ltr capacity, removing sludge / dirt / sand by means of manual wash out, outlet cleaning the overhead reservoir from inside with bleached water and washing with sodium hydrochloride liquid,spraying anti bacteria liquid, writing date of cleaning on outer wall of overhead reservoir with white paint on black base, complete all as specified and directed. |
| 54 | Collection of water sample from Peer baba or other locations, storage, submission of sample to NABL accredited Testing Lab and submission of complete testing reports and detailed analysis as per IS - 10500 which includes physical, chemical, bacteriological, biological properties, undesirable substances, toxic substances, radioactive substances and all other analysis/tests & residue limits mentioned in IS code,complete all as specified and directed.Note: (i) Sampling and frequency of testing of water should be as per CPHEEO manual of water supply and treatment.(ii) Report shall be submitted as per Annexture \"I\" and Appendix \"A\" |
| 55 | Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6.3 mm thick burried directly in ground vertically to a depth not less than 2.25 metre below ground level with top edge of the earth plate at a depth not less than 1.5 M below ground level, connected to galvanized iron strip 32mm x 6mm by means of bots, nuts and washer of galvanized iron or steel all as shown in electrical plate No. 3 SSR Part I connected to earthing test point with 40mm dia light grade protection pipe up to 7.5m long including earthwork and excavation , PCC 1:3:6 type C-1 using 20 mm graded stone aggregate for earht chamber provn of RCC cover 40 mm thick in 1:2:4 mix type B1 funnel, complete all as specified and directed. |
| 56 | Note:- Deduction for Schedule of credit (Sch \"A\" Part-II) to be made of ?. 28,550.00 from the total quoted amount of BOQwhile accepting the bid. Details of schedule of credit is given in tender documents. |
