|
| 1 | Charpoy GI Pipe(Drg No FD-220):M&L for repair to charpoy GI pipe consisting of following works:-(a)Taking out existing u/s ply wood from charpoy GI pipe complete all as specified and as directed.(b)Supply and fixing of 02 Nos of flat iron of size 40mmx5mm of length equal to width of ply wood/Charpoy GI pipe, bending the flat iron to the shape required to fix tightly to GI pipe with mild steel nuts, bolts 62 to 65mm long, 6mm dia and washers including necessary drilling into GI pipe and fitted in the top portion of flat iron complete all as specified and as directed. (c) Drilling holes 2 Nos each in long rails, 02 Nos each in short rails and 02 Nos at centre of ply wood complete all as specified and as directed.(d)Supply and fixing 12 mm thick ply wood commercial type of size 1980x900mm and fixed to GI pipe frame with nut bolts 6mm dia 62 to 65mm long Make of ply wood Green/Duro/Archit with ISI markedcomplete all as specified and as directed. |
| 2 | Taking down unserviceable/broken long rails of charpoy GI pipe and S&F new long rails of charpoy made out of GI pipe 32 mm dia bore medium grade ISI marked and approved by Engr-in-Charge including threading as shown on drg complete all as specified and as directed. Make of pipe Prakash Surya/Tata/Zindal |
| 3 | Taking down unserviceable/broken short rails of charpoy GI Pipe and fixing the short rail (Short rail shall be made from long rail obtained from serial item No 1.01 above) including cutting and threading complete all as specified and shown on drg. |
| 4 | Taking down unserviceable legs of charpoy GI pipe and fixing legs in charpoy (Legs shall be made from short rail obtained from serial items 1.02 above) including cutting and threading. The bottom of legs shall be provided with Cap (Plug) complete all as specified and shown on drg |
| 5 | Taking outunserviceable elbow 3 way 32 mm dia bore of charpoy GI pipe and S&F of new elbow 32mm dia bore ISI marked as approved by Engr-in-Charge, completed all as specified and shown on drg. |
| 6 | Taking out unserviceable check nut from Charpoy GI pipe and Supply and fixing new check nut suitable for charpoy GI pipe as approved by Engr-in-Charge, completed all as specified and shown on drg. |
| 7 | Charpoy Folding IP Hard Top (Drg No.388 R)Taking out old UNSV ply wood, Supply and fixing 12 mm thick ply wood commercial type of size 1980x900mm and fixed to charpoy folding with nut bolts 6mm dia 45 to 50mm long, Make of ply wood Green/Duro/Archit with ISI marked |
| 8 | Removing of old UNSV PVC cap, supply and fixing new PVC cap of best quality as per Drg. |
| 9 | Painting of Charpoy folding IP hard Top with two coat of synthetic enamlel paint black including denting/painting and preparation of surfacescomplete all as specified and as directed. |
| 10 | Almirah Large Steel (Drg No FD-76 (M) & 1031): M&L for preparation of surfaces external and internal by removing old paint, removing dents/bends, apply putty to obtain smooth surface and apply two coats of spray painting of synthetic enamel paint (silver ash & olive green colours as directed by Engr-in-Charge) on internal and external surfaces over a coat of red oxide primercomplete all as specifiedand as directed.Note: (i) Painting workshall be carried out after carrying out the following reapair works.(ii)Repair work will be measured and paid separately under respective items. |
| 11 | Removing of old unserviceable locks from the locking assembly by loosening of screws, supply & fixing new locks of Godrej pattern with duplicate keys complete all as specified and as directed. |
| 12 | Removing of unserviceable handles from almirah large and supply and fixing of new handle of mild steel chromium plated 100mm best quality as approved by GE complete all as specified and as directed. |
| 13 | Removing of unserviceable hooks from the almirah, supply and fixing of new hooks of best quality to be fixed in the vertical channel below of each shelves to maintain equal distance between shelves complete all as specified and as directed. |
| 14 | Replacement of old unserviceable shelves, supply and fixing new shelves made out of PBI sheet 01 mm thick complete all as specified and as directed. |
| 15 | Removing of unserviceable leg from bottom portion of almirah andsupply &fixing of new leg made out of PBI sheet 1 mm thick as per Drg complete all as specified and as directed. |
| 16 | Removing of unserviceable hinges from shutter and supply and fixing of new hinge as per drawing complete all as specified and as directed. |
| 17 | Removing of old unservicable locking device supply and fixing of new locking device 3 way as per drawing complete all as specified and as directed. |
| 18 | Almirah Med Steel (Drg No FD-76(M) & 1032):M&L for preparation of surfaces external and internal by removing old paint, removing dents/bends, apply putty to obtain smooth surfaceand apply two coats of spray painting of synthetic enamel paint (silver ash & olive green colours as directed by Engr-in-Charge) on internal and external surfaces over a coat of red oxide primer complete all as specifiedand as directed.Note: (i) Painting workshall be carried out after carrying out the following reapair works.(ii)Repair work will be measured and paid separately under respective items. |
| 19 | Removing of old unserviceable locks from the locking assembly by loosening of screws, supply & fixing new locks of Godrej pattern with duplicate keys complete all as specified and as directed. |
| 20 | Removing of unserviceable handles from almirah large and supply and fixing of new handle of mild steel chromium plated 100mm best quality as approved by GE complete all as specified and as directed. |
| 21 | Removing of unserviceable hooks from the almirah, supply and fixing of new hooks of best quality to be fixed in the vertical channel below of each shelves to maintain equal distance between shelves complete all as specified and as directed. |
| 22 | Replacement of old unserviceable shelves, supply and fixing new shelves made out of PBI sheet 01 mm thick complete all as specified and as directed. |
| 23 | Removing of unserviceable leg from bottom portion of almirah supply & fixing of new leg made out of PBI sheet 1 mm thick as per Drg complete all as specified and as directed. |
| 24 | Removing of unserviceable hinges from shutter and supply and fixing of new hinge as per drawing complete all as specified and as directed. |
| 25 | Removing of old unservicable locking device supply and fixing of new locking device 3 way as per drawing complete all as specified and as directed. |
| 26 | Locker Bed side steel (Drg No FD-257)M&L for preparation of surfaces external and internal by removing old paint, removing dents/bends, apply putty to obtain smooth surface and apply two coats of spray painting of synthetic enamel paint smoke grey & olive green colours as directed by Engr-in-Charge) on internal and external surfaces over a coat of red oxide primercomplete all as specifiedand as directed.Note: (i) Painting workshall be carried out after carrying out the following reapair works.(ii)Repair work will be measured and paid separately under respective items. |
| 27 | Removing of old unserviceable CP handles, supply and fixing new mild steel chromium plated handles 100mm long as per Drg complete all as specified and as directed. |
| 28 | Removing of old unserviceableHasp & Staple, supply and fixing of new mild steelchormium plated 100mm x 3mm thick Hasp & Staple complete all as specified and as directed. |
| 29 | Removing of old unserviceable shelves from locker steel, supply and fixing of new shelves of 1mm thick PBI Sheet as per Drg complete all as specified and as directed. |
| 30 | Removing of old unserviceable leg of locker steel, supply and fixing of new leg made of 1mm thick PBISheet as per Drg complete all as specified and as directed. |
| 31 | Removing of old unserviceable bottom sheet of locker steel, supply and fixing of new bottom of 1mm thick PBI Sheet complete all as specified and as directed. |
| 32 | Removing of old unserviceable hanging rod, supply and fixing of newsteel hanging rod 18 gauge 20mm dia as per drg complete all as specified and as directed. |
| 33 | Chair CB Tubular steel with Arms(Drg No FD-75(M)):Repair to chair tubular CB steel with arms including dismantling of old unserviceableparts and replace with new parts as mentioned below and setting right all other existing parts. Chair shall be painted with synthetic enamel paint of OG Colour Ist Gde complete all as specified and as directed. Note : New parts as mentioned here in after shall be measured and paid separately as supply only. |
| 34 | Supply only new seats of Ist class hard teak wood duly canned with cane plastic 2mm wide as per Godrej pattern. Wooden portion of seat shall be painted with two coat of synthetic enamel paint black complete all as specified and as directed. |
| 35 | Supply onlynew back frame of Ist class teak wood duly canned with cane plastic 2mm wide as per Godrej pattern. Wooden portion of back shall be painted with synthetic enamel paint black complete all as specified and as directed. |
| 36 | Supply only new arms of 1st class teak wood duly painted with synthetic enamel paint black complete all as specified and as directed. |
| 37 | Supply only new PVC cap of best quality as per Drg complete all as specified and as directed. |
| 38 | Table Office Officers Steel (Drg No FD-84(M)): Removing of old unserviceable top from Table office Officers, supply and fixing of new top of pre-laminated particle board 18mm thick teak shed, one side balancing white laminated with 4mm Thick teak wood beading all round the top as per Drg complete all as specified and as directed. |
| 39 | Removing of old unserviceabledrawer of Table office Officers, supply and fixing of new drawer made out of 1mm thick MS sheet as per Drg complete all as specified and as directed. |
| 40 | Adjustment of drawer to easy functioning and necessary denting/welding and repairing of bottom channel complete all as specified and as directed. |
| 41 | Removing of old unserviceable side cub board shutterr of Table office Officers, supply and fixing of new side cub board shuttermade out of 1mm thick MS sheet as per Drg complete all as specified and as directed. |
| 42 | Taking out unserviceablelegs,supply and fixing of new legmade out of 25mm square conduit 1.6mm thick as per Drg including cutting/welding etc complete all as specified and as directed. |
| 43 | Ditto- but long rail |
| 44 | Ditto- but short rail |
| 45 | Ditto- but stiffeners |
| 46 | Removing of old unserviceable rubber shoes of Table office Officers steel , supply and fixing of new rubber shoes as per Drg complete all as specified and as directed. |
| 47 | Painting of Table office Officer with two coats spray painting of synthetic enamel paint Olive Green colour including preparation of surfacescomplete all as specified and as directed. |
| 48 | Removing of old unserviceable locks from drawer of table by loosening of screws, supply and fixing of new locks of Godrej pattern with duplicate keys complete all as specified and as directed. |
| 49 | Table Office Clerk steel (Drg No FD-84(M)):Removing of old unserviceable top from Table office Clk steel, supply and fixing of new top of pre-laminated particle board 18mm thick exterior grade teak shed, one side balancing white laminated with 4 mm thickteak wood beading all round the top as per Drg complete all as specified and as directed. |
| 50 | Removing of old unserviceable drawer of Table office Clk steel, supply and fixing of new drawer made out of 1mm thick PBI Sheet as per Drg complete all as specified and as directed. |
| 51 | Adjustment of drawer to easy functioning and necessary denting/welding and repairing of bottom channel complete all as specified and as directed. |
| 52 | Taking out unserviceablelegs, supply and fixing of new legmade out of 25mm square conduit 1.6mm thick as per Drg including cutting/welding etc complete all as specified and as directed. |
| 53 | Ditto- but long rail |
| 54 | Ditto- but short rail |
| 55 | Ditto- but stiffeners |
| 56 | Removing of old unserviceable rubber shoes of Table office Clerk steel , supply and fixing of new rubber shoes as per Drg complete all as specified and as directed. |
| 57 | Painting of Table office Clk steel with two coats of spray painting of synthetic enamlel paint Olive Green colour including denting/painting and preparation of surfacescomplete all as specified and as directed. |
| 58 | Removing of old unserviceable locks from drawer of table by loosening of screws, supply and fixing of new locks of Godrej pattern with duplicate keys complete all as specified and as directed. |
| 59 | Table 3\" x 3\" Steel (Drg No. FD-1009):Removing of old unserviceable top from Table office Clk steel, supply and fixing of new top of pre-laminated particle board 18mm thick exterior grade teak shed, one side balancing white laminated with 4 mm thickteak wood beading all round the top as per Drg complete all as specified and as directed. |
| 60 | Taking out unserviceablelegs,supply and fixing of new legmade out of 20mm square conduit 1.6mm thick as per Drg including cutting/welding etc complete all as specified and as directed. |
| 61 | Removing of old unserviceablerubber shoes of Table 3x3 steel , supply and fixing of new rubber shoes as per Drg complete all as specified and as directed. |
| 62 | Painting of Table 3\"x3. steel with two coats of synthetic enamlel paint Olive Green colour including denting/painting and preparation of surfacescomplete all as specified and as directed. |
| 63 | Teapoy Verandah (Drg No FD-255):Taking out unserviceable top, supply and fixing of new top of pre-laminated particle board exterior grade 18/19mm thick teak shade and other side with balancing white lamination with 4mm thick teak wood beading all roundwith French polishing as per Drg complete all as specified and as directed. |
| 64 | Taking out unserviceable i.e leg,supply and fixing new legas per drg complete all as specified and as directed. |
| 65 | Ditto- but stiffeners |
| 66 | Taking out of unserviceableshoes, supply and fixing of new rubber shoes as per Drg complete all as specified and as directed. |
| 67 | Painting of frame of teapoy verandah with two coats of synthetic enamel paint, white colour and perparation of surfaces complete all as specified and as directed. |
| 68 | Chair Verandah FD/E6/MAP/06 Repair to chair verandah by way of taking down UNSV PVC seat and Back from chair and cleaning by scrapping and making smooth surface and apply two coats of synthetic white enamel paint of ultra white colour Make (Asian/Apcolite/Burger) complete all as specified and as directed. |
| 69 | Taking down deteriorated portion of frame and providing new 19mm round tube of 16 gauge as in legs, frame stiffner etc (each not exceeding 40 cm long) as required fixing with necessary welding and finishing as per existing with two coats of existing colour of enamel paint complete all as specifiedand as directed. |
| 70 | Supply and fixing of new PVC Seat and Back with 4mm thick with weight not less than 1.85 kg and grooves 90x10mm 10 nos on seat and back of approved best quality, complete all as specified and as directed |
| 71 | Supply and fixing of new PVC shoe of best quality as per drg. |
| 72 | Almirah Large Steel 1/2 H 1/2 S (Drg No :M&L for preparation of surfaces external and internal by removing old paint, removing dents/bends, apply putty to obtain smooth surface and apply two coats of spray painting of synthetic enamel paint (silver ash & olive green colours as directed by Engr-in-Charge) on internal and external surfaces over a coat of red oxide primercomplete all as specifiedand as directed.Note: (i) Painting workshall be carried out after carrying out the following reapair works.(ii)Repair work will be measured and paid separately under respective items. |
| 73 | Removing of old unserviceable locks from the locking assembly by loosening of screws, supply & fixing new locks of Godrej pattern with duplicate keys complete all as specified and as directed. |
| 74 | Removing of unserviceable handles from almirah large and supply and fixing of new handle of mild steel chromium plated 100mm best quality as approved by GE complete all as specified and as directed. |
| 75 | Removing of unserviceable leg from bottom portion of almirah andsupply &fixing of new leg made out of PBI sheet 1 mm thick as per Drg complete all as specified and as directed. |
| 76 | Removing of old unservicable locking device supply and fixing of new locking device 3 way as per drawing complete all as specified and as directed. |
| 77 | Table computer FD/E6/MAP/03Repair to table including dismantling of old broken parts and replace with new parts as mentioned below. Table shall be repainted with apply two coats of synthetic enamel paint OG/Black including denting and welding complete all as specified and as directed. |
| 78 | Taking out unserviceable top of table computer, supply and fixing of new top of pre-laminated particle board 18mm exterior grade BWR with all round 4mm thick teak wood beading as per Drg. |
| 79 | Taking out UNSV key board tray,supply and fixing of new key board tray as per Drg. |
| 80 | Taking out unserviceable drawer, supply and fixing of new drawer of teak wood except bottom which shall be of 6mm ply wood commercial. |
| 81 | Taking out old UNSV nylon buffers, S & F new nylon buffers superior quality as approved by Engr-in-Charge. |
| 82 | Bed Hard (Drg No. FD/E6/MAP/08 ( R ) Taking out old UNSV ply wood,Supply and fixing 12 mm thick ply wood commercial type of size 1980x900mm and fixed to Bed Hard frame with nuts bolts 25mm long screw, Make of ply wood Greenply/Duro/Archid with ISI marked |
| 83 | Removing of old UNSV PVC cap, supply and fixing new PVC cap of best quality as per Drg. |
| 84 | Removing of old UNSV foot board, supply and fixing new foot boardof 18mm pre laminated particle board exterior grade complete all as specified and as directed. |
| 85 | Removing of old UNSV head board, supply and fixing new head boardof 18mm pre laminated particle board exterior grade complete all as specified and as directed. |
| 86 | Painting of Bed hard with two coats of synthetic enamlel paint black includingdenting/painting and preparation of surfacescomplete all as specified and as directed. |
| 87 | Charpoy IP Hard Top( Drg No. FD/MAP-II/01)Taking out old UNSV ply wood, Supply and fixing 12 mm thick ply wood commercial type of size 1980x900mm and fixed to GI pipe frame with nuts bolts 6mm dia 62 to 65mm long Make of ply wood Green/Duro/Archit with ISI marked |
| 88 | Removing of old UNSV PVC cap, supply and fixing new PVC cap of best quality as per Drg. |
| 89 | Painting of Charpoy IP hard Top with two coats of synthetic enamlel paint black includingdenting/painting and preparation of surfacescomplete all as specified and as directed. |
| 90 | Chair Verandah (Drg No. FD 256/359/259/19)M&L for preparation of old steel surface of chair verandah and welding loose joints. If any including de-rusting the surface and painting with one coat of synthetic enammel paint white colour (1st Grade Quality) and re-caning with 4-5 mm half round 0.8mm thick plastic cane made out of virgin plastic, in existing pattern complete. Rest all as specified and directed by engr-in-charge. |
| 91 | Supply & Fixing Hard Rubber Shoes suitable for chair verandah of approved quality. |
| 92 | Appliying for two coats of spray painting of synthetic enamel paint silver ash/black colour on internal and external surfaces over a coat of red oxide primer after removing the existing paint and preparing the surface smoothely by scrapping/cleaning the surface with emery paper. |
| 93 | Cabinet filling |
| 94 | Almirah large steel(FD-76M & 1031) |
| 95 | Almirah Med Steel(FD-76(M) & 1032) |
| 96 | Rack steel adj 3 tyre (FD-69) |
| 97 | Rack steel adj 6 tyre(FD-69) |
| 98 | Book case steel |
| 99 | Locker steel(FD-1029) |
| 100 | Table office Clerk steel(FD-84M) |
| 101 | Table office officer steel(FD-84(M)) |
| 102 | Rack Shoe Steel (FD/E6/MAP/02 (R)) |
| 103 | Rack Side Steel |
