|
| 1 | Excavation in foundation in ordinary soil including lift upto 1.5 m ( 5 fts ) and lead upto 30 meter&incluiding filling wateringand ramming of excavated earthin to the trenches or in to thespace between the building and the sides offoundation trenches in to the plinth and removeland disposal of surplus earthas directed by engineer-in-charge upto a distance of 30 meter from the foundation trenches. ( Rate is incluidingRoyality ) (PWD SI. No. 251 |
| 2 | As in item no.(251)above but excavation in soil mixed with moorum/shingle/kankar requiring the use of special T&P such as pickaxes,sabbals etc. (PWD SI. No. 252) |
| 3 | Sand filling in plinth including supply of necessary quantity of sandfrom the site of workand including watering dressingetc. Rate to include cost of all materials,labour and T&P etc. Required for priper completionof the work ( Rate is incluidingRoyality ) (PWD SI. No. 255) |
| 4 | Same as item no. 251above but excavation in soil mixed with gravel and boulder. (PWD SI. No. 256) |
| 5 | Cleaning jungle including uprooting of rank vegetations grass,bush,wood treesand saplings of girth upto 30 cm.Measured at a height of 1 meter above ground level & removel of rubbishupto a distance of 50 meters outsidethe periphery of area cleared. (PWD SI. No. 259) |
| 6 | Concrete with4 cm. GaugeBrick ballast,fine sand, cement in proportion of 8:4:1 in foundation and under floor including supply of all materials labour and t&p etc. required for proper completion of the work. (PWD SI. No. 275 |
| 7 | Concrete with4 cm. Gaugeapproved stone ballast, approved coarse sand and cement in the in proportion of 4 : 2 : 1 including supply of all materials labour and t&p etc. required for proper completion of the work. (PWD SI. No. 279) |
| 8 | Cast cement concrete door sills,chaukhats boundary posts,shelves and similar small work with cementapproved coarse sand and 2 cm. Gauge approved stone ballast in thein proportion of 1 : 2 : 4 , excluding supply of reinforcement and it binding but incluidingits fixingand bindingthe same with24 B.W.G.G.I. Binding wire ,and includingthe cost of binding wire ,moulds and all othermaterials, labour and t&p etc. required for proper completion of the work. (PWD SI. No. 282) |
| 9 | R.C.C. Workcementapproved coarse sand and 2 cm. Gauge approved stone ballast in thein proportion of 1 : 1.5 : 3 ,in lintels of doors and windowsexcluding supply of reinforcement and it binding but incluidingits fixingand bindingthe same with24 B.W.G.G.I. Binding wire ,and including necessarycentering and shuttering etc. And alsoincluding supply of all materials labour and t&p etc. required for proper completion of the work. Binding wire cost being included in the item. ( PWD SI. No. 283 {1} ) |
| 10 | As in item No.283(1)above but for slab ( PWD SI. No. 284 {1} ) |
| 11 | New Item a . As in item 279 but with 2 cm gauge approved stone ballast ,coarse sand & cement in proportion 1 : 2 : 4 |
| 12 | First class Brick work in1 : 6 cement and fine sandin foundation and plinthincluding supply of all materials labour and t&p etc. required for proper completion of the work. (PWD SI. No. 303) |
| 13 | First class Brick work in1 : 6 cement and fine sandin super structure including necessary cutting and mouldingof bricks as required and also includinghoney combBrick work ,thickness of wall not to be less than 1.5 brick thick. including supply of all materials labour and t&p etc required for proper completion of the work. (PWD SI. No. 309) |
| 14 | As in item (309)above but for wall of one brick thick. (PWD SI. No. 310) |
| 15 | Providing and laying40 mm gauge brick ballast in soak pit including supply of all materials labour and t&p etc. required for proper completion of the work.New item : After (PWD SI. No. 327) |
| 16 | Providing and laying damp proof course 2.5 cm.thick with cement concrete 1:2:4(1cement:2coarse sand:4graded stone aggregate 10 mm nominal size)and curing completeNew item 1 : After (PWD SI. No. 361) |
| 17 | Painting on D.P.C. with two coats of air blown bitumen 85/50 or 85/25 @ 1.7Kg/Sqm approx including cost of fuel if any.New item 2 : After (PWD SI. No. 361) |
| 18 | Supply and fixing of stone slab 4 cm. Thick with plain mouldingon one edgeand fine dressedon all exposed surfaceas in stepsand shelves laid cement mortar consistingof1 part cement 6partapproved fine sand . including supply of all materials labour and t&p etc. required for proper completion of the work. (PWD SI. No. 371) |
| 19 | Supply and fixing galvanised mosquitos proof heavy quality iron wire gaugeor expended metal of heavy quality over window and door and including Supply and fixing of C.P.Teak woodbattens 8 cm. X 1 cm and including supply ofnecessary screws, all materials,labour and T & P etc. Require forproper completion of the work. (PWD SI. No. 455) |
| 20 | Providing & Fixing 12 mm (1/2”)thick and 150 mm(6”)wide pelmet with 25 mm(1”)diameter Wooden curtain rod and brackets top covered with same wood plank 12 mm (1/2”)thickincluding fixing with 25x3mm M.S.Flat 15 cm.(6”)long and plugs etc. Complete with painting polishing or oiling as required. (PWD SI. No. 482)Teak Wood |
| 21 | Providing & Fixing 12 mm (1/2”)thick and 150 mm(6”)wide pelmet with 25 mm(1”)diameter Wooden curtain rod and brackets top covered with same wood plank 12 mm (1/2”)thickincluding fixing with 25x3mm M.S.Flat 15 cm.(6”)long and plugs etc. Complete with painting polishing or oiling as required. (PWD SI. No. 482) Shisham wood 815.00 |
| 22 | Providing & Fixing 12 mm (1/2”)thick and 150 mm(6”)wide pelmet with 25 mm(1”)diameter Wooden curtain rod and brackets top covered with same wood plank 12 mm (1/2”)thickincluding fixing with 25x3mm M.S.Flat 15 cm.(6”)long and plugs etc. Complete with painting polishing or oiling as required. (PWD SI. No. 482) Deodar wood990.00 |
| 23 | Providing & Fixing 12 mm (1/2”)thick and 150 mm(6”)wide pelmet with 25 mm(1”)diameter Wooden curtain rod and brackets top covered with same wood plank 12 mm (1/2”)thickincluding fixing with 25x3mm M.S.Flat 15 cm.(6”)long and plugs etc. Complete with painting polishing or oiling as required. (PWD SI. No. 482) Kail wood |
| 24 | Providing & Fixing curtain rod of aluminium with brackets and wooden plugs etc.wherever necessary complete . (PWD SI. No. 486) 12 mm dia |
| 25 | Providing & Fixing curtain rod of aluminium with brackets and wooden plugs etc.wherever necessary complete . (PWD SI. No. 486) 25 mm dia |
| 26 | Mild steel or iron work in havy sizes such as trusses ; builts up gates , door frames , record racks roof work , glites etc. wrought to required form including drilling holes ; rivetting or welding where necessary , and also including supply of steel , bolts , nuts etc. & their fixing required for proper completion of the work . (PWD SI. No. 503) |
| 27 | Mild steel or iron in plain work such as reinforced concrete or reinforced brick work ( when not included in an over all ratos ) wrought to required shape as nocossary including bending for proper completion of the work and including supply of all steel and wastage & overlapping & hooks . (PWD SI. No. 504) |
| 28 | Providing and fixing 10 cm ( 4”) diaC.I. down pipe complete with rose ,heads , bends with eye hole ,shoesand grathings etc. Fixed to walls with suitable clamps as directed by engineer-in-charge. (PWD SI. No. 511) |
| 29 | Providing and fixing 1 mm. Thick M S. Sheetgaragedoor with frame of40 x40 6 mm angle iron , 3.15 mm thick M S.Gusset platesat the junctions corners, incluiding Supply and fixing of necessary fittings,lock rail of15” length of oxidised iron and includingpintels, hooks at the top andapplying a primingcoat of red lead paint on all sides complete. (PWD SI. No. 517)a.Using M.S. angle 40 x 40 x 6 mm for sqm diagonal braces.Details of cost of a doulbe leaf door size 2.4 m x 2.4 m - 5.76 sq . metre . |
| 30 | Providing and fixing 1 mm. Thick M S. Sheetgaragedoor with frame of40 x40 6 mm angle iron , 3.15 mm thick M S.Gusset platesat the junctions corners, incluiding Supply and fixing of necessary fittings,lock rail of15” length of oxidised iron and includingpintels, hooks at the top andapplying a primingcoat of red lead paint on all sides complete. (PWD SI. No. 517)b. Using M.S. flat 40-6 mm ( 11/2”x1/2”) for diagonal bracings and central cross piece Detail of cost for a double leaf door . Size 2.4x2.4-5.76 sq . metre . |
| 31 | Supplying and fixing roiling shutters of approved make of 80 x 125 mm . ( 3 x3 1/2 \" ) guage cold rolled M.S. latha inter locked tbroughout their entire length and joined together at the end by cold locks and mounted on specially designed pipe shaft with brackets , side guides and arrangements for inside and outside locking with push and pull operations complete but excluding the cost of top cover and spring . (PWD SI. No. 520) |
| 32 | Providing and fixing 27.5 cm . long wire spring grade no . 2 for rolling shutter . (PWD SI. No. 521) |
| 33 | Providing and fixing top cover for rolling shutters . (PWD SI. No. 522) |
| 34 | Providing & fixing ball bearing for rolling shutters. (PWD SI. No. 523) |
| 35 | Extra add to S. I. no . 520 for providing mechanical device . chain &cranks operation for operating rolling shuttersa.Shutters exceeding 11.2 sqm ( 120 sq.ft . ) in area and upto 16.80 sqm ( 180 sq.ft. ) in area . Average area 14 sqm |
| 36 | Extra add to S. I. no . 520 for providing mechanical device . chain &cranks operation for operating rolling shuttersArea exceeding 16.8 sq . metre ( 180sft )Taking details of cost for 20 sqm area .Rs. 5.00 |
| 37 | Supply of Approved M.S. Z - section windows and ventilators excluding cost of glass panes but including supply of all material its fabrication nuts and bolt , hole fast for proper completion of work as per direction of engineer - in - charge and also including cost of handle stays rod etc. and one coat of red oxide paint complete in the respect site of work.New item No.1 : After (PWD SI. No. 524b) |
| 38 | Supply ofM.S Angle iron door ,windows, ventilation frame made of approved M.S Angle iron wrought to required form incluiding drilling holes , welding and recetting where necessary and alsoincluding supply of all materials ,such as steel hinges of required size, nut and volts etc. And also including all taxes,wastage and one coat ofred oxide paint complete in all respect as per direction ofengineer-in-chargeforproper completion of the work at site of work. New item No.2 : After (PWD SI. No. |
| 39 | Supply ofM.S grill of approved quality and drawing made of flat ironnot bigger then20 x 4 mm sizeincluding supply of all materials ,fabrication , labour ,t&p andalsoone coat ofred oxide paint complete in all respect as per direction ofengineer-in-chargeforproper completion of the work at site. New item No.3 : After (PWD SI. No. 524b) |
| 40 | Supply and fixing ward robe shutters made of 18 guage ( 1.25 mm ) M.S. sheets including cold rolling of required shape and including supply & fixing of approved quality local handles etc complete including supply of all material , labour , & including painting etc.New item No.4 : After (PWD SI. No. 524b) |
| 41 | Providing and laying \"Brick bat coba” 100 mm thick laidwithM 150 class brick bat coba7.50 cm. Thick with gap of15 mm to each other ,over 20 mm thick baseof cement mortar 1:4 cement andcoarse sandmixed with water proofing compoundspreading cement slurrymixedwith aereliccement concretewater proofing compoundfilled gaps of coba& top of coba mortar mixedwith water proofing compoundin 1:4 cement and approved coarse sand mortarfinished smooth& topmashed false square 30 cm x 30 cm and side wall parapet shall be monotythic plaster wall upto30 cm higher and junction and corner shall be rounded byBrick ballast cement andcoarse sandand masonry coba with top finishing plaster mixing with acetic water proofing compound @2 % by weight & including supply of all materials, LabourT &Petc. Requiredforproper completion of the works. After (PWD SI. No. 5.7.1.6)Newitem No-1 |
| 42 | Providing and laying ofFerrow cement concrete in 1:2:4 coarse sand and20 mm gaugecement approved approved stone ballast andmixed with water proofing [email protected] kg/bagof cement in thickness of5 cm average including making ridges and valley for proper drainage of roof waterincluding embedding of expended metal zali of 6 gauge iron wire including cutting and fixing properly over slab and including 6 mm thick cement plaster in 1:2 cement coarse sandfinished wirh floating coat of neat cement also including supply of all materials, LabourT &Petc. Requiredforproper completion of the works.and as perdirection ofengineer-in-charge. After (PWD SI. No. 5.7.1.6)Newitem No-2 |
| 43 | 15 mm thick plaster in 1 cement : 4 fine sandsingle coaton fair side of single or half brick wall for interiarplastering up tofloor two level including internal rounded angles chamfers ,and/orrounded angles not exceeding 80 mm in girth and finished even and smooth.no extrafor mixing any additive.(PWD SI. No. 17.59) (II ) |
| 44 | Sams as item no.37 but in 1 cement : 6 fine sand ( PWD SI. No. 17.59)(III) |
| 45 | Providing and fixing water proofing material in cement mortar for plastering or in concrete workin the proportion recommended by the manufacturer. ( PWD SI. No. 599) |
| 46 | 15 mm cement concrete topping 1:2 ( 1 cement : 2 stone aggregate of size4.75 mmand below by volume ) laid over and finished monolithic with structure slab. ( PWD SI. No. 14.66) |
| 47 | 20 mm cement concrete topping 1:2 ( 1 cement : 2 stone aggregate of size4.75 mmand below by volume ) and monolithic base concrete including fixing of glass strips( excluding cost ofglass strips) as desired by theengineer-in-charge. ( PWD SI. No. 14.67) |
| 48 | 25 mm cement concrete flooring1:2:4(1 cement : 2 coarse sand : 4 graded stone aggregate of size 12.5 mm and below) by laid over base concrete finished with floating cost of neat cement (base concrete to be paid separately ) including fixing of glass strips.( excluding cost ofglass strips) ( PWD SI. No. 14.69) |
| 49 | cement concrete flooring1:2:4(1 cement : 2 coarse sand : 4 graded stone aggregate of size 20 mm nominal size)laid in one layer finished with floating cost of neat cement (40 mm thick floor) ( PWD SI. No. 665) |
| 50 | P/L 20 mm thick Kota stone flooring over 20 mm thickbase of cement mortar 1:4 (1 cement : 4 coarse sand) laid over jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete.After (PWD SI. No. 628) 14.43(a) |
| 51 | Providing & Laying of 8 to 10 mm thick ivory or light shade Vitrified tiles of 600 mm X 600 mm size inflooring or skirting laid with 1:3 cement mortar (1 cement : 3 coarse sand) finishing with cement slurry & with pigment grouting & polishing complete i/csupply of all materials, labour ,T& P etc requiredfor proper completion of the work. After (PWD SI. No. 628)New item No-2 |
| 52 | Providing & Laying of 80mm interlocking concrete block pavement laid in stone dust base and fill joint with fine sand.Joint filled after labling and dressing basei/csupply of all materials, labour, T& P etc requiredfor proper completion of the work. After (PWD SI. No. 628)New item No-3 |
| 53 | Providing & Laying of 60mm interlocking concrete block pavement laid in stone dust base and fill joint with fine sand.Joint filled after labling and dressing basei/csupply of all materials, labour, T& P etc requiredfor proper completion of the work. After (PWD SI. No. 628)New item No-4 |
| 54 | Painting or Varnishing on iron works in small areasor new wood work with one coat of ready mixed priming paint & one coat of approved superior quality ready mixed paint of clear synthetic varnish including supply of all materials, labour and T&P etc. required for proper completion of the work. Paint to be used should confirm to the L.S.I.No. 103 1950 ( PWD SI. No. 641) |
| 55 | Same as in Item PWD SI.No.641 above but for every coat after1st Coat. Details of cost for 650 sft. Area. ( PWD SI. No. 642) |
| 56 | As in Item PWD SI.No.642 above but for every coat on previously painted old wood or steel work. ( PWD SI. No. 643) |
| 57 | Painting roofs or other iron work in large area with one coat of ready mixed paint priming one coat of approved paint (British ANTISOL) including supply of all materials, labour & T&P etc. required for proper completion of the work. Paint to be used should confirm 1.S.I.No. 103-1950. Cost for area of 650 Sft. Primning Coat. ( PWD SI. No. 644) |
| 58 | As in Item No. PWD SI.No.644above but every coat after the first coat. ( PWD SI. No. 645) |
| 59 | As in Item No.PWD SI.No.645 above but every coat on previously painted old surface. ( PWD SI. No. 646) |
| 60 | One priming coat & one coat oil distemper on new work including supply of all materials, labour and T&P etc. required for proper completion of the work. ( PWD SI. No. 649) |
| 61 | As in item No.PWD SI.No.649above but for every coat after thefirst coat. ( PWD SI. No. 650) |
| 62 | As in item No.PWD SI.No.650above but for every coat on previously old distempered Surface. ( PWD SI. No. 651) |
| 63 | Removing paint or varnish with paint remover or caustic soda including supply of all materials, labour and T&P etc. required for proper completion of the work. ( PWD SI. No. 657) |
| 64 | Wax Polishing new wood work with approved ready made wax polish or approved French polish after rubbing down with sand paper including supply of all materials, labour and T&P etc. required for proper completion of the work. ( PWD SI. No. 658) |
| 65 | As in item No.PWD SI.No.658 above but repolishing wood work already wax or French polished with approved readymade wax polish or approved French Polish including supply of all materials, labour and T&P etc. required for proper completion of the work. ( PWD SI. No. 659) |
| 66 | Finishing walls with water proofing cement paint of approved make and quality on new work with two coat to give to give an even shade. Including supply of all material, labour and T&P etc. required for proper completlon of the work. ( PWD SI. No. 660) |
| 67 | Same as in item No. PWD SI.No.660 but for each coat of water proof cement paint after the first coat to give an even shade. ( PWD SI. No. 661) |
| 68 | Finishing walls with one coat of water proof cement paint of approved quality on previously old treated surface with this paint to give an even shade Including supply of all material, labour and T&P etc. required for proper completion of the work ( PWD SI. No. 662) |
| 69 | Cement washingIncluding supply of all material, labour and T&P etc. required for proper completion of the work ( PWD SI. No. 680) |
| 70 | Dismantling brick work or stone work in lime or cement mortar and including stacking of materials as directed by Engineer-in-charge with in a distance of 60 mt. (200 feet) ( PWD SI. No. 692) |
| 71 | Dismantling reinforcement cement concrete or reinforcement brick work, including stacking of materials as directed by Engineer-in-charge with in a distance of 60 mt. (200 feet) ( PWD SI. No. 694) |
| 72 | Dismantling cement concrete or brick or granolithic floors including base concrete and including stacking of dismantled materials as directed by Engineer-in-charge with in a distance of 60 mt. (200 feet) ( PWD SI. No. 697) |
| 73 | Dismantling doors & windows, chowkhats,with hold fastandincluding stacking of dismantled materials as directed by Engineer-in-charge with in a distance of 60 mt. (200 feet) ( PWD SI. No. 703) |
| 74 | Dismantling existing plasterincluding disposalof refuse material asdirected by Engineer-in-charge with in a distance of 60 mt. (200 feet) ( PWD SI. No. 706) |
| 75 | Scraping old white or colour washincluding disposalof refuse material asdirected by Engineer-in-charge with in a distance of 60 mt. (200 feet) ( PWD SI. No. 708) |
| 76 | Providing and injecting chemical forpre-constructional anti-termite treatmentandcreatingand chemical barrier under and around the coloumn pitswall treanchesbasementexcavationtop surfaceif plinth filling junction of wall andfloor , along the external per meterofbinding expansionjoints surroundingofpipesand conduitetc, complete( plinth area of the building atground floor onlyshall be measured as per I.S 6313 ( part2013 ) IMIDACLOPRID SC 30.5 N concentrate or any other approved material such asHepthachlorof chlordane will be used . the rate of application of chemical emulsion shall be as follows. :-(Anti –termite treatment )Chapter -18PWD S.I. NO.1)(1)Treatment for masonry and foundation 5 liters per Sqm. RS 195.00 |
| 77 | Providing and injecting chemical forpre-constructional anti-termite treatmentandcreatingand chemical barrier under and around the coloumn pitswall treanchesbasementexcavationtop surfaceif plinth filling junction of wall andfloor , along the external per meterofbinding expansionjoints surroundingofpipesand conduitetc, complete( plinth area of the building atground floor onlyshall be measured as per I.S 6313 ( part2013 ) IMIDACLOPRID SC 30.5 N concentrate or any other approved material such asHepthachlorof chlordane will be used . the rate of application of chemical emulsion shall be as follows. :-(Anti –termite treatment )Chapter -18PWD S.I. NO.1)(2)Back fill in immediate contract with foundation 7.5 liters perSqm. |
| 78 | Providing and injecting chemical forpre-constructional anti-termite treatmentandcreatingand chemical barrier under and around the coloumn pitswall treanchesbasementexcavationtop surfaceif plinth filling junction of wall andfloor , along the external per meterofbinding expansionjoints surroundingofpipesand conduitetc, complete( plinth area of the building atground floor onlyshall be measured as per I.S 6313 ( part2013 ) IMIDACLOPRID SC 30.5 N concentrate or any other approved material such asHepthachlorof chlordane will be used . the rate of application of chemical emulsion shall be as follows. :-(Anti –termite treatment )Chapter -18PWD S.I. NO.1)(3)Treatment of top surface of plinthfilling 5 liters perSqm. |
| 79 | Providing and injecting chemical forpre-constructional anti-termite treatmentandcreatingand chemical barrier under and around the coloumn pitswall treanchesbasementexcavationtop surfaceif plinth filling junction of wall andfloor , along the external per meterofbinding expansionjoints surroundingofpipesand conduitetc, complete( plinth area of the building atground floor onlyshall be measured as per I.S 6313 ( part2013 ) IMIDACLOPRID SC 30.5 N concentrate or any other approved material such asHepthachlorof chlordane will be used . the rate of application of chemical emulsion shall be as follows. :-(Anti –termite treatment )Chapter -18PWD S.I. NO.1)(4) Treatment of soil along external per meter of Building 7.5 liters perSqm. |
| 80 | Providing and injecting chemical forpre-constructional anti-termite treatmentandcreatingand chemical barrier under and around the coloumn pitswall treanchesbasementexcavationtop surfaceif plinth filling junction of wall andfloor , along the external per meterofbinding expansionjoints surroundingofpipesand conduitetc, complete( plinth area of the building atground floor onlyshall be measured as per I.S 6313 ( part2013 ) IMIDACLOPRID SC 30.5 N concentrate or any other approved material such asHepthachlorof chlordane will be used . the rate of application of chemical emulsion shall be as follows. :-(Anti –termite treatment )Chapter -18PWD S.I. NO.1)Treatment of soil under apron alongexternal per meter 5 liters per Sqm. Rs. 195.00 |
| 81 | Providing and injecting chemical forpost constructional anti-termite treatmentwith drilling holesat junction of floors with walls and pillers, the application of chemicalsshall be as perrelevantI.S. Codeandthe rate of applicationof chemical shall alsobe as provided in theI.S. 6313 part-III, including quarterly inspectionandprovidingrequiredtreatment for one year . as per direction ofE/I(Anti –termite treatmentChapter -18 (PWD S.I. NO.2 ) |
| 82 | Supply and fixing of 100 mm dia A.C down pipe complete with rose heads bends M.S Ctamps 2.5 cm x 3 mm fixed to walls by 15 cm Long 6 mm dia nail and including repair of plaster pointing etc if damaged during fixing of the pipes including cost of all material labour, tools and plant etc required for proper completion of work. ( PWD SI. No. 730) |
| 83 | Supply and installing of low density polyethylene seamless one peace moulded tank and placing the same in proper position including all taxes labour and T&P etc for proper completion of the work. Tank should be ISI marked (for 500 Liters) After (PWD SI. No. 730)New item No-1 |
| 84 | As item P.W.D. S.I. No.730 above but for 150 mm dia PVC pipe After (PWD SI. No. 730) New item No-2 |
| 85 | Same as above but for 100 mm dia PVC PipeAfter (PWD SI. No. 730)New item No-3 |
| 86 | Same as above but for 75 mm dia PVC PipeAfter (PWD SI. No. 730)New item No-4 |
| 87 | Same as above but for50 mm dia PVC PipeAfter (PWD SI. No. 730)New item No-5 |
| 88 | Fixing panes of glass with equalor equivalentI.S.I. marked qualityputty. Bradsandsprings and including supply of all materials, LabourT &Petc. Requiredforproper completion of the works. ( PWD SI. No. 812)(a) 4.0 mm thick |
| 89 | Fixing panes of glass with equalor equivalentI.S.I. marked qualityputty. Bradsandsprings and including supply of all materials, LabourT &Petc. Requiredforproper completion of the works. ( PWD SI. No. 812)(b) 5.0mm thick |
| 90 | Same as PWD SI.No.812 avobe but with wooden beading and nails and spring andincluding supply of all materials, LabourT &Petc. Requiredforproper completion of the works. ( PWD SI. No. 813)(a) 4.0 mm thick |
| 91 | Same as PWD SI.No.812 avobe but with wooden beading and nails and spring andincluding supply of all materials, LabourT &Petc. Requiredforproper completion of the works. ( PWD SI. No. 813)(b) 5.0mm thick |
| 92 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: 17.1.1 White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests (D.S.R.2021,Vol.2,Code-17.1)17.1.1 |
| 93 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid. (D.S.R.2021,Vol.2,Code-17.3)17.3.1 |
| 94 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap.(D.S.R.2021,Vol.2,Code-17.7)17.7.2 |
| 95 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm(D.S.R.2021,Vol.2,Code-17.23) |
| 96 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer.(D.S.R.2021,Vol.2,Code-17.7A) |
| 97 | Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required: White glazed fire clay kitchen sink of size 600x450x 250 mm (D.S.R.2021,Vol.2,Code-17.9)17.9.1 |
| 98 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink without drain board 610x510 mm bowl depth 200 mm (D.S.R.2021,Vol.2,Code-17.10)17.10.2.1 |
| 99 | Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete. 10 litre (full flush) capacity-white (D.S.R.2021,Vol.2,Code-17.19)17.19.1 |
| 100 | Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe. (D.S.R.2021,Vol.2,Code-17.24) |
| 101 | Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : Flat back wash basin of size 630x450 mm (D.S.R.2021,Vol.2,Code-17.25)17.25.1 |
| 102 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.17.28.2 Flexible pipe 32 mm dia (D.S.R.2021,Vol.2,Code-17.28)17.28.2.1 |
| 103 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. (D.S.R.2021,Vol.2,Code-17.31) |
| 104 | Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete(D.S.R.2021,Vol.2,Code-17.78) |
| 105 | Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. (D.S.R.2021,Vol.2,Code-17.81) |
| 106 | Providing & fixing white vitreous china water less urinal of size 600 x 330 x 315 mm having antibacterial /germs free ceramic surface, fixed with cartridge having debris catcher and hygiene seal. (D.S.R.2021,Vol.2,Code-17.79) |
| 107 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 18.10.115 mm dia nominal bore Rs. 304.15 (D.S.R.2021,Vol.2,Code-18.10) |
| 108 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 18.10.220 mm dia nominal bore Rs. 373.35(D.S.R.2021,Vol.2,Code-18.10) |
| 109 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 18.10.325 mm dia nominal bore Rs. 491.20(D.S.R.2021,Vol.2,Code-18.10) |
| 110 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 18.10.432 mm dia nominal bore Rs. 563.60 (D.S.R.2021,Vol.2,Code-18.10) |
| 111 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 18.10.540 mm dia nominal bore (D.S.R.2021,Vol.2,Code-18.10) |
| 112 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 18.10.650 mm dia nominal bore(D.S.R.2021,Vol.2,Code-18.10) |
| 113 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 18.12.1 15 mm dia nominal bore Rs 267.50 (D.S.R.2021,Vol.2,Code-18.12) |
| 114 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 18.12.2 20 mm dia nominal bore Rs 315.35(D.S.R.2021,Vol.2,Code-18.12) |
| 115 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 18.12.3 25 mm dia nominal bore Rs 417.95 (D.S.R.2021,Vol.2,Code-18.12) |
| 116 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 18.12.4 32 mm dia nominal boreRs 457.70 (D.S.R.2021,Vol.2,Code-18.12) |
| 117 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 18.12.5 40 mm dia nominal bore Rs 558.35 (D.S.R.2021,Vol.2,Code-18.12) |
| 118 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 18.12.6 50 mm dia nominal bore Rs 654.20 (D.S.R.2021,Vol.2,Code-18.12) |
| 119 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 18.17.1 25 mm nominal boreRs 532.35 (D.S.R.2021,Vol.2,Code-18.17) |
| 120 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 18.17.1A20 mm nominal boreRs 461.75 (D.S.R.2021,Vol.2,Code-18.17) |
| 121 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 18.17.232 mm nominal bore.Rs 589.90 (D.S.R.2021,Vol.2,Code-18.17) |
| 122 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 18.17.450 mm nominal bore Rs878.25 (D.S.R.2021,Vol.2,Code-18.17) |
| 123 | Providing and fixingball valve (brass) of approved quality, High and low pressure, with plastic float complete 18.18.1 15 mm nominal bore (D.S.R.2021,Vol.2,Code-18.18) |
| 124 | Providing and fixing CP brass bib cock of approved quality conforming IS 893118.49.115 mmnominal bore Rs. 434.20 (D.S.R.2021,Vol.2,Code-18.49) |
| 125 | Providing and fixing CP brass long nose bib cock of approved quality conforming IS 893118.50.115 mmnominal bore Rs. 715.05.20 (D.S.R.2021,Vol.2,Code-18.50) |
| 126 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards 18.51.1 15 mm nominal bore (D.S.R.2021,Vol.2,Code-18.51) |
| 127 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 18.52.1 15 mm nominal bore (D.S.R.2021,Vol.2,Code-18.52) |
| 128 | C.I.Cover 300x300 mm with frame complete( PWD SI. No. 59,Chapter-22) |
| 129 | Apex (Asian paint ) exterior paint in two coat including supply of all materials, LabourT &Petc. Requiredforproper completion of the works. |
| 130 | Apex (Asian paint ) exterior paint in one coat including supply of all materials, LabourT &Petc. Requiredforproper completion of the works. |
| 131 | Providing and fixing false ceiling at all height including providing andfixing of frame work made of special sections, power pressed fromM.S. sheets and galvanized with zinc coating of 120 gms/sqm (bothside inclusive) as per IS : 277 and consisting of angle cleats of size25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at1200 mm centre to centre, one flange fixed to the ceiling with dashfastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flangeof cleat fixed to the angle hangers of 25x10x0.50 mm of requiredlength with nuts & bolts of required size and other end of anglehanger fixed with intermediate G.I. channels 45x15x0.9 mm runningat the spacing of 1200 mm centre to centre, to which the ceilingsection 0.5 mm thick bottom wedge of 80 mm with tapered flangesof 26 mm each having lips of 10.5 mm, at 450 mm centre to centre,shall be fixed in a direction perpendicular to G.I. intermediate channelwith connecting clips made out of 2.64 mm dia x 230 mm long G.I.wire at every junction, including fixing perimeter channels 0.5 mmthick 27 mm high having flanges of 20 mm and 30 mm long, theperimeter of ceiling fixed to wall/partition with the help of rawl plugsat 450 mm centre, with 25mm long dry wall screws @ 230 mminterval, including fixing of gypsum board to ceiling section andperimeter channel with the help of dry wall screws of size 3.5 x 25mm at 230 mm c/c, including jointing and finishing to a flush finishof tapered and square edges of the board with recommended jointingcompound , jointing tapes , finishing with jointing compound in 3layers covering upto 150 mm on both sides of joint and two coats ofprimer suitable for board, all as per manufacturer\"s specification andalso including the cost of making openings for light fittings, grills,diffusers, cutouts made with frame of perimeter channels suitablyfixed, all complete as per drawings, specification and direction ofthe Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum moisture resistant board. (D.S.R.Vol.112.45.3) |
| 132 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. (D.S.R.2021,Vol.2,Code-13.26) |
| 133 | Providing and fixingofAluminium section partition(Non Coated)half panel5 mm glass and half panel laminated partical boardincluding necessary hardware fittingincluding supply of all materials, LabourT &Petc. Requiredforproper completion of the works |
| 134 | Providing and fixingofAluminium section door (Non Coated)fully 5 mm thick glass partitionorhalf panel5 mm glass and half panel laminated partical board including necessary hardware fittingincluding supply of all materials, LabourT &Petc. Requiredforproper completion of the works. |
| 135 | Providing and fixingofAluminium section partition( Coated)half panel5 mm glass and half panel laminated partical boardincluding necessary hardware fittingincluding supply of all materials, LabourT &Petc. Requiredforproper completion of the works. |
| 136 | Providing and fixingofAluminium section door ( Coated)fully 5 mm thick glass partitionorhalf panel5 mm glass and half panel laminated partical board including necessary hardware fittingincluding supply of all materials, LabourT &Petc. Requiredforproper completion of the works. |
| 137 | Supplying at site Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete. (D.S.R.2021,Vol.2,Code-16.19) |
| 138 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. 16.70.1Made of G.I. wire of dia 4 mm (D.S.R.2021,Vol.2,Code-16.70)16.70.1 |
| 139 | Painting one coat with silicon & acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces: (Internal Wall surface)D.S.R.2021,Vol.2,Code-13.51.1) |
| 140 | Painting two coat with silicon & acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces: (Internal Wall surface)D.S.R.2021,Vol.2,Code-13.51.2) |
| 141 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. D.S.R.2021,Vol.2,Code-13.80) |
| 142 | Providing & fixing I.S.I. marked flush door shutters commercial quality sitapur/other approved plywood ,30 mm thick( PWD SI. No. 470,Chapter-09) |
| 143 | Providing & fixing I.S.I. marked P.V.C. door shutters commercial quality |
| 144 | Providing & fixingstainless steel ( Grade 304) railing made of Hollowtubes, channels, plates etc., including welding, grinding, buffing, polishingand making curvature (wherever required) and fitting the same withnecessary stainless steel nuts and bolts complete, i/c fixing the railingwith necessary accessories & stainless steel dash fasteners , stainlesssteel bolts etc., of required size, on the top of the floor or the side ofwaist slab with suitable arrangement as per approval of Engineer-incharge,(for payment purpose only weight of stainless steel membersshall be considered excluding fixing accessories such as nuts, bolts,fasteners etc.). D.S.R.2018,Vol.1,Code-10.28) |
| 145 | S/fof G.I. Chain link Park fencing jali (Gap 100mmx100mm) ,But Excluding supply and fixing/grouting angle iron post. Including supply of all material,labour,T&P etc. |
| 146 | S/fof G.I. Chain link Park fencing jali (Gap 75mmx75mm) ,But Excluding supply and fixing/grouting angle iron post. Including supply of all material,labour,T&P etc. |
| 147 | All other works/ Items not included abovequote rate above or below S.O.R.* |
