}
  • Home   ›
  •   Indian Tenders   › Tender Notice : 33337365

    • Development Of Distribution Infrastructure Kanpur Zone Development Of , kanpur-Uttar Pradesh

    Dakshinanchal Vidyut Vitran Nigam Limited-DVVNL has published Development Of Distribution Infrastructure Kanpur Zone Development Of . Submission Date for this Tender is 30-08-2022. Infrastructure Work Tenders in kanpur Uttar Pradesh. Bidders can get complete Tender details and download the document.




    Tender Notice

    33337365
    Corrigendum : Development Of Distribution Infrastructure Kanpur Zone Development Of
    Open Tender
    Indian
    Uttar Pradesh
    kanpur
    30-08-2022

    Tender Details

    Development Of Distribution Infrastructure Kanpur Zone Development Of

    Corrigendum Details

    Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
    1 05-Aug-2022 Corrigendum_1 Technical Bid 21-08-2022
    2 18-Aug-2022 Corrigendum_2_Revised_Form-21 Technical Bid 21-08-2022
    3 18-Aug-2022 Corrigendum_2 Technical Bid 21-08-2022
    4 20-Aug-2022 Date Extension-VII Date 30-08-2022

    Key Value

    Document Fees
    INR 29500 /-
    EMD
    INR 50000000.0 /-
    Tender Value
    INR 699.56 Crore /-

    BOQ Items

    Name of Work: Development of Distribution Infrastructure at KANPUR Zone ( Electricity Distribution Circle- EDC Etawah, EDC Auraiya, EDC Kannauj, EDC Farrukhabad, EDC Kanpur Nagar and EDC Kanpur Dehat), District - Etawah, Auraiya, Kannauj, Farrukhabad, Kanpur Nagar andKanpur Dehat of UTTAR PRADESHState under the Revamped Reforms-based and Results-linked, Distribution Sector Scheme
    Sl. No. Item Description
    1SUPPLY OF ITEMS
    28.5 Mtr.long ,180Kg . PCC Poles as per Approved Drawing and Technical specification
    39 Meter long STP as per Approved Drawing and Technical specification (SP-33)
    411 Meter long STP as per Approved Drawing and Technical specification (SP-55)
    513 Meter long STP as per Approved Drawing and Technical specification (SP-72)
    6Stone Pad (300x300x75mm)
    71 core (Al.) 120mm2 LT Armoured XLPE Cable
    81 core (Al.) 95mm2 LT Armoured XLPE Cable
    91 core (Al.) 50mm2 LT Armoured XLPE Cable
    101 core (Al.) 25mm2 LT Armoured XLPE Cable
    1111 kVXLPE Cable 3x185 Sq. mm. (Armoured)
    121x25 mm2 Un-armoured XLPE insulated Al. LT Cable for energising the distribution boxes.
    131x25 mm2 Armoured XLPE insulated Al. LT Cable for energising the distribution boxes.
    14Armoured Service Cable 2CX4 SQMM For Single phase consumer for upto 2KW
    15Armoured Service Cable 2CX6 SQMM For Single phase consumer for above 2 and upto 4 KW
    16Armoured Service Cable 4CX10 SQMM For Three phase consumer for upto 10kW
    17Armoured Service Cable 4CX16 SQMM For Three phase consumer for upto 25kW
    18Aerial Bunched XLPE Cable 3X120 (Ph) + 1X95 ( Bare messenger cum neutral) + 1x16 (insulated Street lighting) sqmm
    19Aerial Bunched XLPE Cable 3X50 (Ph) + 1X35 ( Bare messenger cum neutral) + 1x16 (insulated Street lighting) sqmm
    20Aerial Bunched XLPE Cable 3X95 (Ph) + 1X70 ( Bare messenger cum neutral) + 1x16 (insulated Street lighting) sqmm
    21Aerial Bunched XLPE Cable 1X16 (Ph) + 1X25 ( Bare messenger cum neutral) sqmm
    22LT XLPE cable 3.5x150 Sq mm
    23LT XLPE cable 3.5x70 Sq mm
    24LT XLPE cable 4x16 Sq mm
    25L.T. XLPE cable 10 Sq. mm Single Core
    26LT XLPE cable 3.5x400 Sq mm
    27ACSR Rabbit Conductor
    28Aluminium binding wire - 6 SWG
    29Jointing sleave -ACSR Rabbit
    30Mid Span Joint 120mm2
    31ACSR Rabbit Conductor -Jumpering Works
    32ACSR Weasel Conductor-Jumpering Works
    3311 KV Danger Board with Clamp and Nuts & Bolts
    3411 KV Number Plate with Clamp and Nuts & Bolts
    3511KV Fuse Set (Drop out) with clamps
    3611KV TPMO with fixing clamps
    3710 KVA, 11KV/250 V, 1 Ph Transformer (Level-1 Self Protected Aluminium Wound Type)
    3816 KVA, 11KV/250 V, 1 Ph Transformer (Level-1 Self Protected Aluminium Wound Type)
    3925 KVA , 11/0.433 KV T/F (Level-1 Self Protected Aluminium Wound Type)
    4063 KVA , 11/0.433 KV T/F (Level-1 Self Protected Aluminium Wound Type)
    41100 KVA , 11/0.433 KV T/F (Level-1 Self Protected Aluminium Wound Type)
    42LT Distribution Box withMCCB for protection of 10 KVA T/F and Bus Bar foroutgoing consumer connections with Energy Meter (SMC Type) as per TS. (DRG- no.REC/RDSS/DTR/SS/20 )
    43LT Distribution Box withMCCB for protection of 16 KVA T/F and Bus Bar foroutgoing consumer connections with Energy Meter (SMC Type) as per TS.( DRG- no. REC/RDSS/DTR/SS/20 )
    44LT Distribution Box withMCCB and AMI metering (Smart Meter compitable with System) equipment & fixing arrangement As per TS . (SMC Type) for 25KVA (DRG- no. REC/RDSS/DTR/SS/24)
    45LT incoming Panel with AMI metering (Smart Meter compitable with System DRG- no. REC/RDSS/DTR/SS/16) equipment & fixing arrangement As per TS . (SMC Type) for 63 KVA (DRG- no. REC/RDSS/DTR/SS/23)
    46LT incoming Panel with AMI metering (Smart Meter compitable with System DRG- no. REC/RDSS/DTR/SS/23) equipment & fixing arrangement As per TS . (SMC Type) for 100KVA (DRG- no. REC/RDSS/DTR/SS/23)
    47LT incoming Panel with AMI metering (Smart Meter compitable with System DRG- no. REC/RDSS/DTR/SS/23) equipment & fixing arrangement as per TS. (SMC Type) for 250KVA (DRG- no. REC/RDSS/DTR/SS/22)
    48Copper L-Piece 50x225x10mm
    49Copper L-Piece 50x225x12mm
    50Al Lug long barrel off size
    519 KV LA , 5 KA (Distribution Class)
    529 KV LA , 10 KA (Station Class)
    53Earthing Coil connected with nutbolt using Charchol and Salt
    54GI Flat 50X6 for Earthing
    55GI Flat 25X3 for Earthing
    56Earthing Arrangement ofchemical pipe size of 80mm , 3000 mm.long and 6 SWG earthing wire etc.
    57GI Pipe 6" Diameter with clamps
    58G.I. Barbed Wire
    59G.I. Wire No. 16 SWG for binding
    60G.I. Wire 6 SWG
    61G.I. Wire 8 SWG
    6211 KV Disc Fitting T & C type
    6311 KV Polymer Disc Insulators45 KNT&C Type
    6411 KV Pin Insulator Polymer Type as per TS
    6533 KV Composit Pin Insulator (Polymer Type)
    66LT Shackle Insulator
    67Insulating Piercing Connector (50-150 sq.mm)
    68Insulating Piercing Connector (16-150 sq.mm)
    69Dead End clamp (Insulated)
    70End Cap for AB cable
    71Suspension clamps (Insulated)
    72Pole Clamps with with I-Hook & nut & bolts for laying ABC
    73SS Strips As per Drg -REC/RDSS/LT-ACC-ABC/01
    74Dead End assembly unit as Per Drg-REC/RDSS/LT-ACC-ABC/03
    75Suspension assembly unit as Per Drg- REC/RDSS/LT-ACC-ABC/
    76D-Straps
    77Insulation mastic tape (2inc X 10 feet).
    78Single phase Glass Fiber Reinforced Polyester Sheet Moulding Compound (SMC) Pole top distribution box with clamps (40x3 mm) and nut & bolts
    79Three phase Glass Fiber Reinforced Polyester Sheet Moulding Compound (SMC)Pole top distribution box with clamps (40x3 mm) and nut & bolts
    80Aluminium paint
    81Red Oxide Paint
    82Smart TVM Meter Compatible with System (AMI) complete Set
    83HDPE Pipe, PN-4 PE-80(160 mm dia.) with clamp, etc
    84Crimping type heavy duty aluminium lugs suitable for connection XLPE cables
    85Helical formed Fitting
    86Cable Route Marker
    87PG Clamps 16 Sq mm .- 50 sq mm (For line to line jumpering of massenger wire & energizing DB Neutral)
    88PG Clamp for Rabbit
    89GI Stay Wire 7/10 SWG
    90GI Stay Wire 7/8 SWG
    91HT Guy Insulator
    92LT Guy Insulator
    9333 KV Stay Complete (GI Stay Rod 20x1800 mm-1 nos , Eye Bolt -1 nos, Anchor plate -1 nos,Turn Buckle-1 nos, Hellically Formed End Fitting, Square Washer and thimble, Nuts Bolt & Washers
    94Stay Complete (GI Stay Rod 16x1800 mm-1 nos , Eye Bolt -1 nos, Anchor plate -1 nos,Turn Buckle-1 nos, Hellically Formed End Fitting, Square Washer and thimble, Nuts Bolt & Washers Ref- Drg - REC/RDSS/GEN/09
    95Turn Buckle
    96HT Stay Clamp as per approved drawing-33 KV
    97HT Stay Clamp as per approved drawing-11 KV
    98LT Stay Clamp as per approved drawing
    9911 KV Cross arm holding clamps with bolts & nuts
    10011 KV Steel X-arm V type (GI Channel 65X 65 X 6 mm )
    10133 KV Cross arm holding clamps with bolts & nuts
    10233 KV Steel X-arm V type (GI Channel 100 X 50 X 6 mm )
    103Angle for vertical ArmL50x50x6 (Type -A)-900MM
    104Angle for vertical ArmL50x50x6 (Type -B)- 900MM
    105Top Clamp for Vertical arm L 50X6 (Type -A)- 435 mm
    106Top Clamp for Vertical arm L 50X6 (Type -B)- 435 mm
    107Bottom Clamp for Vertical arm L 50X6 (Type -A)- 507 mm
    108Bottom Clamp for Vertical arm L 50X6 (Type -B)- 507 mm
    109Clamp FOR Top Channel with Nut bolt
    110Clamps for LT T-off with bolts & nuts
    111E- Bracket for 11 KV line
    112Eye Bolt
    113F- Bracket for 11 KV line
    114F- Bracket for 33 KV line
    115Guarding angle 65x55x6 mm, 1.6 mtr. With Clamp
    116Holding clamps for Top channel, GI Channel & GI Angle with bolts & nuts
    117GI Top channel 100x50x6 mm., 2240 mmlong (17.70 Kg/M)
    118GI Angle Iron 65x65x6mm, 2700 mm long bracing with 4 clamps
    119GI Channel 100x50x6 mm 2028 mm long (For Fuse Set )
    120GI Top channel 125x65x6 mm., 2240 mmlong
    121Tee-off Channel 100x50x1300 mm with clamp, Nut & Bolt
    122Clamps for Dist. Box (40x6 mm)
    123Clamps for T/F (75x8 mm GI flat).
    124GI. guarding Angle 75x75x6 mm 3010 mm long with Clamp
    125Height raising channel 100x50,2240 mm long
    126Back clamp for Height raising channel holding clamps with bolts & nuts
    127GI Channel clamp with nuts & bolts
    128GI Channel 125x65 mm
    129GIangle 75x75x6x2028 mm with clamp &bolt and nut (T/F base)
    130GI Channel 75x75x6 mm &bolt and nut (T/F base Support)
    13111 KV, 1250 A Outgoing VCB Indoor type with CTR 200/100/5 - 5A 350 MVA (Compatible with existing VCB at 33/11 KV substation)
    132Heat Shrinkable Jointing Kit Outdoor for 11 KV 3x185 sq. mm XLPE Cable
    133Heat Shrinkable Jointing Kit indoor for 11 KV 3x185 sq. mm XLPE Cable
    134Cable jointing kit straight through (3x185)
    135Extra Prefabricated Items Like Clamp , Channel, Angle with Nut bolt
    136Satellite Multi-Tap Connector as per TS
    137Sign Board as per TS and Approved Drawing
    138ERECTION PART
    139Conversion of existing Service Cable to New Armoured Service cable with all required accessories like lugs etc. (Complete Work in all respect) and Removing and shifting of Existing Material to client store
    140Armoured Service Cable 2CX4 SQMM For Single phase consumer for upto 2KW
    141Armoured Service Cable 2CX6 SQMM For Single phase consumer for above 2 and upto 4 KW
    142Armoured Service Cable 4CX10 SQMM For Three phase consumer for upto 10kW
    143Armoured Service Cable 4CX16 SQMM For Three phase consumer for upto 25kW
    144Erection, Testingand commissioning of Replacement ofLT Bare Conductor with AB Cables (Complete Work in all respect)
    1458.5 Mtr.long ,180Kg . PCC Poles as per Approved Drawing and Technical specification
    1469 Meter long STP as per Approved Drawing and Technical specification (SP-33)
    147Stone Pad (300x300x75mm)
    148Aerial Bunched XLPE Cable 3X120 (Ph) + 1X95 ( Bare messenger cum neutral) + 1x16 (insulated Street lighting) sqmm
    149Aerial Bunched XLPE Cable 3X95 (Ph) + 1X70 ( Bare messenger cum neutral) + 1x16 (insulated Street lighting) sqmm
    150Aerial Bunched XLPE Cable 3X50 (Ph) + 1X35 ( Bare messenger cum neutral) + 1x16 (insulated Street lighting) sqmm
    151Pole Clamps with with I-Hook & nut & bolts for laying ABC
    152Dead End clamp (Insulated)
    153Suspension clamps (Insulated)
    154SS Strips As per Drg -REC/RDSS/LT-ACC-ABC/01
    155Dead End assembly unit as Per Drg-REC/RDSS/LT-ACC-ABC/03
    156Suspension assembly unit as Per Drg- REC/RDSS/LT-ACC-ABC/
    157End Cap for AB cable
    158Insulating Piercing Connector (16-150 sq.mm)
    159PG Clamps 16 Sq mm .- 50 sq mm (For line to line jumpering of massenger wire & energizing DB Neutral)
    1601x25 mm2 Un-armoured XLPE insulated Al. LT Cable for energising the distribution boxes.
    161Single phase Glass Fiber Reinforced Polyester Sheet Moulding Compound (SMC) Pole top distribution box with clamps (40x3 mm) and nut & bolts
    162Three phase Glass Fiber Reinforced Polyester Sheet Moulding Compound (SMC)Pole top distribution box with clamps (40x3 mm) and nut & bolts
    163Earthing Coil connected with nutbolt using Charchol and Salt
    164Stay Complete (GI Stay Rod 16x1800 mm-1 nos , Eye Bolt -1 nos, Anchor plate -1 nos,Turn Buckle-1 nos, Hellically Formed End Fitting, Square Washer and thimble, Nuts Bolt & Washers Ref- Drg - REC/RDSS/GEN/09
    165LT Guy Insulator
    166GI Stay Wire 7/10 SWG
    167LT Stay Clamp as per approved drawing
    168Removing and shifting of Existing Material to client store
    169Concreting Works of Poles using cement concreting foundation 1 part cement, 2 part sand, 4 part 20 mm size stone aggregate chips (1:2:4)-0.268 Cmt (8.5 Meter - PCC pole)as per approved Drawing
    170Concreting Works of Poles using cement concreting foundation 1 part cement, 2 part sand, 4 part 20 mm size stone aggregate chips (1:2:4)-0.39 Cmt (9 Meter - STP ) as per approved Drawing
    171Erection, Testingand commissioning of Replacement ofAB Cable (Damage)with AB Cables (Complete Work in all respect)
    1728.5 Mtr.long ,180Kg . PCC Poles as per Approved Drawing and Technical specification
    1739 Meter long STP as per Approved Drawing and Technical specification (SP-33)
    174Stone Pad (300x300x75mm)
    175Aerial Bunched XLPE Cable 3X120 (Ph) + 1X95 ( Bare messenger cum neutral) + 1x16 (insulated Street lighting) sqmm
    176Aerial Bunched XLPE Cable 3X95 (Ph) + 1X70 ( Bare messenger cum neutral) + 1x16 (insulated Street lighting) sqmm
    177Pole Clamps with with I-Hook & nut & bolts for laying ABC
    178Dead End clamp (Insulated)
    179Suspension clamps (Insulated)
    180SS Strips As per Drg -REC/RDSS/LT-ACC-ABC/01
    181Dead End assembly unit as Per Drg-REC/RDSS/LT-ACC-ABC/03
    182Suspension assembly unit as Per Drg- REC/RDSS/LT-ACC-ABC/
    183End Cap for AB cable
    184Insulating Piercing Connector (16-150 sq.mm)
    185PG Clamps 16 Sq mm .- 50 sq mm (For line to line jumpering of massenger wire & energizing DB Neutral)
    1861x25 mm2 Un-armoured XLPE insulated Al. LT Cable for energising the distribution boxes.
    187Single phase Glass Fiber Reinforced Polyester Sheet Moulding Compound (SMC) Pole top distribution box with clamps (40x3 mm) and nut & bolts
    188Three phase Glass Fiber Reinforced Polyester Sheet Moulding Compound (SMC)Pole top distribution box with clamps (40x3 mm) and nut & bolts
    189Earthing Coil connected with nutbolt using Charchol and Salt
    190Stay Complete (GI Stay Rod 16x1800 mm-1 nos , Eye Bolt -1 nos, Anchor plate -1 nos,Turn Buckle-1 nos, Hellically Formed End Fitting, Square Washer and thimble, Nuts Bolt & Washers Ref- Drg - REC/RDSS/GEN/09
    191LT Guy Insulator
    192GI Stay Wire 7/10 SWG
    193LT Stay Clamp as per approved drawing
    194Removing and shifting of Existing Material to client store
    195Concreting Works of Poles using cement concreting foundation 1 part cement, 2 part sand, 4 part 20 mm size stone aggregate chips (1:2:4)-0.268 Cmt (8.5 Meter - PCC pole)as per approved Drawing
    196Concreting Works of Poles using cement concreting foundation 1 part cement, 2 part sand, 4 part 20 mm size stone aggregate chips (1:2:4)-0.39 Cmt (9 Meter - STP ) as per approved Drawing
    197Erection, Testingand commissioning of Replacement of LT Line with XLPE Armoured Cables (Complete Work in all respect)
    1988.5 Mtr.long ,180Kg . PCC Poles as per Approved Drawing and Technical specification
    1999 Meter long STP as per Approved Drawing and Technical specification (SP-33)
    200Stone Pad (300x300x75mm)
    201Angle for vertical ArmL50x50x6 (Type -A)-900MM
    202Top Clamp for Vertical arm L 50X6 (Type -A)- 435 mm
    203Bottom Clamp for Vertical arm L 50X6 (Type -A)- 507 mm
    204Angle for vertical ArmL50x50x6 (Type -B)- 900MM
    205Top Clamp for Vertical arm L 50X6 (Type -B)- 435 mm
    206Bottom Clamp for Vertical arm L 50X6 (Type -B)- 507 mm
    207LT Shackle Insulator
    208D-Straps
    2091 core (Al.) 120mm2 LT Armoured XLPE Cable
    2101 core (Al.) 95mm2 LT Armoured XLPE Cable
    2111 core (Al.) 50mm2 LT Armoured XLPE Cable
    2121 core (Al.) 25mm2 LT Armoured XLPE Cable
    213Mid Span Joint 120mm2
    214Insulating Piercing Connector (50-150 sq.mm)
    215Insulation mastic tape (2inc X 10 feet).
    216Single phase Glass Fiber Reinforced Polyester Sheet Moulding Compound (SMC) Pole top distribution box with clamps (40x3 mm) and nut & bolts
    217Three phase Glass Fiber Reinforced Polyester Sheet Moulding Compound (SMC)Pole top distribution box with clamps (40x3 mm) and nut & bolts
    218Satellite Multi-Tap Connector as per TS
    2191x25 mm2 Armoured XLPE insulated Al. LT Cable for energising the distribution boxes.
    220Earthing Coil connected with nutbolt using Charchol and Salt
    221Stay Complete (GI Stay Rod 16x1800 mm-1 nos , Eye Bolt -1 nos, Anchor plate -1 nos,Turn Buckle-1 nos, Hellically Formed End Fitting, Square Washer and thimble, Nuts Bolt & Washers Ref- Drg - REC/RDSS/GEN/09
    222LT Guy Insulator
    223GI Stay Wire 7/10 SWG
    224LT Stay Clamp as per approved drawing
    225Concreting Works of Poles using cement concreting foundation 1 part cement, 2 part sand, 4 part 20 mm size stone aggregate chips (1:2:4)-0.268 Cmt (8.5 Meter - PCC pole)as per approved Drawing
    226Concreting Works of Poles using cement concreting foundation 1 part cement, 2 part sand, 4 part 20 mm size stone aggregate chips (1:2:4)-0.39 Cmt (9 Meter - STP ) as per approved Drawing
    227Removing and shifting of Existing Material to client store
    228Survey , Erection, Testingand commissioning of 11 Kv Line (Feeder Spliting Due to over loading) on 8.5 Mtr PCC pole-916 CKM and 11 Mtr STP Pole -222 CKM (Complete Work in all respect)
    229Route survey and pole spotting for 11 KV line
    2308.5 Mtr.long ,180Kg . PCC Poles as per Approved Drawing and Technical specification
    23111 Meter long STP as per Approved Drawing and Technical specification (SP-55)
    232ACSR Rabbit Conductor
    233Stone Pad (300x300x75mm)
    23411 KV Steel X-arm V type (GI Channel 65X 65 X 6 mm )
    23511 KV Cross arm holding clamps with bolts & nuts
    236F- Bracket for 11 KV line
    237GI Top channel 100x50x6 mm., 2240 mmlong (17.70 Kg/M)
    238Clamp FOR Top Channel with Nut bolt
    239GI Angle Iron 65x65x6mm, 2700 mm long bracing with 4 clamps
    240E- Bracket for 11 KV line
    24111 KV Pin Insulator Polymer Type as per TS
    24211 KV Polymer Disc Insulators45 KNT&C Type
    24311 KV Disc Fitting T & C type
    244PG Clamp for Rabbit
    245Aluminium binding wire - 6 SWG
    246Jointing sleave -ACSR Rabbit
    24711 KV Danger Board with Clamp and Nuts & Bolts
    248G.I. Barbed Wire
    249Aluminium paint
    250Red Oxide Paint
    251Earthing Coil connected with nutbolt using Charchol and Salt
    252Stay Complete (GI Stay Rod 16x1800 mm-1 nos , Eye Bolt -1 nos, Anchor plate -1 nos,Turn Buckle-1 nos, Hellically Formed End Fitting, Square Washer and thimble, Nuts Bolt & Washers Ref- Drg - REC/RDSS/GEN/09
    253HT Guy Insulator
    254GI Stay Wire 7/10 SWG
    255HT Stay Clamp as per approved drawing-11 KV
    25611 KV Number Plate with Clamp and Nuts & Bolts
    257Concreting Works of Poles using cement concreting foundation 1 part cement, 2 part sand, 4 part 20 mm size stone aggregate chips (1:2:4)-0.268 Cmt (8.5 Meter - PCC pole)as per approved Drawing
    258Concreting Works of Poles using cement concreting foundation 1 part cement, 2 part sand, 4 part 20 mm size stone aggregate chips (1:2:4)-0.44 Cmt (11 Meter - STP ) as per approved Drawing
    259Erection, Testingand commissioning of 11 KV VCB with complete Assoceries as apporoved Drawing and Tecchanical Specifiactions (Complete Work in all respect)
    26011 KV, 1250 A Outgoing VCB Indoor type with CTR 200/100/5 - 5A 350 MVA (Compatible with existing VCB at 33/11 KV substation)
    26111 kVXLPE Cable 3x185 Sq. mm. (Armoured)
    262Heat Shrinkable Jointing Kit indoor for 11 KV 3x185 sq. mm XLPE Cable
    263Heat Shrinkable Jointing Kit Outdoor for 11 KV 3x185 sq. mm XLPE Cable
    264Smart TVM Meter Compatible with System (AMI) complete Set
    265Earthing Arrangement ofchemical pipe size of 80mm , 3000 mm.long and 6 SWG earthing wire etc.
    266GI Flat 50X6 for Earthing
    2678.5 Mtr.long ,180Kg . PCC Poles as per Approved Drawing and Technical specification
    268Stone Pad (300x300x75mm)
    269GI Top channel 100x50x6 mm., 2240 mmlong (17.70 Kg/M)
    270Clamp FOR Top Channel with Nut bolt
    271GI Angle Iron 65x65x6mm, 2700 mm long bracing with 4 clamps
    27211 KV Polymer Disc Insulators45 KNT&C Type
    27311 KV Disc Fitting T & C type
    274PG Clamp for Rabbit
    27511 KV Danger Board with Clamp and Nuts & Bolts
    276G.I. Barbed Wire
    277Earthing Coil connected with nutbolt using Charchol and Salt
    278Stay Complete (GI Stay Rod 16x1800 mm-1 nos , Eye Bolt -1 nos, Anchor plate -1 nos,Turn Buckle-1 nos, Hellically Formed End Fitting, Square Washer and thimble, Nuts Bolt & Washers Ref- Drg - REC/RDSS/GEN/09
    279HT Guy Insulator
    280GI Stay Wire 7/10 SWG
    281HT Stay Clamp as per approved drawing-11 KV
    282Concreting Works of Poles using cement concreting foundation 1 part cement, 2 part sand, 4 part 20 mm size stone aggregate chips (1:2:4)-0.268 Cmt (8.5 Meter - PCC pole)as per approved Drawing
    283Survey , Erection, Testingand commissioning of 11 Kv Line (Feeder Sagrigation) (Complete Work in all respect)
    284Route survey and pole spotting for 11 KV line
    2858.5 Mtr.long ,180Kg . PCC Poles as per Approved Drawing and Technical specification
    286ACSR Rabbit Conductor
    287Stone Pad (300x300x75mm)
    28811 KV Steel X-arm V type (GI Channel 65X 65 X 6 mm )
    28911 KV Cross arm holding clamps with bolts & nuts
    290F- Bracket for 11 KV line
    291GI Top channel 100x50x6 mm., 2240 mmlong (17.70 Kg/M)
    292Clamp FOR Top Channel with Nut bolt
    293GI Angle Iron 65x65x6mm, 2700 mm long bracing with 4 clamps
    294E- Bracket for 11 KV line
    29511 KV Pin Insulator Polymer Type as per TS
    29611 KV Polymer Disc Insulators45 KNT&C Type
    29711 KV Disc Fitting T & C type
    298PG Clamp for Rabbit
    299Aluminium binding wire - 6 SWG
    300Jointing sleave -ACSR Rabbit
    30111 KV Danger Board with Clamp and Nuts & Bolts
    302G.I. Barbed Wire
    303Earthing Coil connected with nutbolt using Charchol and Salt
    304Stay Complete (GI Stay Rod 16x1800 mm-1 nos , Eye Bolt -1 nos, Anchor plate -1 nos,Turn Buckle-1 nos, Hellically Formed End Fitting, Square Washer and thimble, Nuts Bolt & Washers Ref- Drg - REC/RDSS/GEN/09
    305HT Guy Insulator
    306GI Stay Wire 7/10 SWG
    307HT Stay Clamp as per approved drawing-11 KV
    30811 KV Number Plate with Clamp and Nuts & Bolts
    309Concreting Works of Poles using cement concreting foundation 1 part cement, 2 part sand, 4 part 20 mm size stone aggregate chips (1:2:4)-0.268 Cmt (8.5 Meter - PCC pole)as per approved Drawing
    310Extra Prefabricated Items Like Clamp , Channel, Angle with Nut bolt
    311Erection, Testingand commissioning of 11 KV VCB with complete Assoceries as apporoved Drawing and Tecchanical Specifiactions(Feeder Segrigation) (Complete Work in all respect)
    31211 KV, 1250 A Outgoing VCB Indoor type with CTR 200/100/5 - 5A 350 MVA (Compatible with existing VCB at 33/11 KV substation)
    31311 kVXLPE Cable 3x185 Sq. mm. (Armoured)
    314Heat Shrinkable Jointing Kit indoor for 11 KV 3x185 sq. mm XLPE Cable
    315Heat Shrinkable Jointing Kit Outdoor for 11 KV 3x185 sq. mm XLPE Cable
    316Smart TVM Meter Compatible with System (AMI) complete Set
    317Earthing Arrangement ofchemical pipe size of 80mm , 3000 mm.long and 6 SWG earthing wire etc.
    318GI Flat 50X6 for Earthing
    3198.5 Mtr.long ,180Kg . PCC Poles as per Approved Drawing and Technical specification
    320Stone Pad (300x300x75mm)
    321GI Top channel 100x50x6 mm., 2240 mmlong (17.70 Kg/M)
    322Clamp FOR Top Channel with Nut bolt
    323GI Angle Iron 65x65x6mm, 2700 mm long bracing with 4 clamps
    32411 KV Polymer Disc Insulators45 KNT&C Type
    32511 KV Disc Fitting T & C type
    326PG Clamp for Rabbit
    32711 KV Danger Board with Clamp and Nuts & Bolts
    328G.I. Barbed Wire
    329Earthing Coil connected with nutbolt using Charchol and Salt
    330Stay Complete (GI Stay Rod 16x1800 mm-1 nos , Eye Bolt -1 nos, Anchor plate -1 nos,Turn Buckle-1 nos, Hellically Formed End Fitting, Square Washer and thimble, Nuts Bolt & Washers Ref- Drg - REC/RDSS/GEN/09
    331HT Guy Insulator
    332GI Stay Wire 7/10 SWG
    333HT Stay Clamp as per approved drawing-11 KV
    334Concreting Works of Poles using cement concreting foundation 1 part cement, 2 part sand, 4 part 20 mm size stone aggregate chips (1:2:4)-0.268 Cmt (8.5 Meter - PCC pole)as per approved Drawing
    335Erection, Testingand commissioning of 11 KV NH Crossing (Complete Work in all respect)
    33611 kVXLPE Cable 3x185 Sq. mm. (Armoured)
    337Heat Shrinkable Jointing Kit Outdoor for 11 KV 3x185 sq. mm XLPE Cable
    338HDPE Pipe, PN-4 PE-80(160 mm dia.) with clamp, etc
    339GI Pipe 6" Diameter with clamps
    34011 Meter long STP as per Approved Drawing and Technical specification (SP-55)
    341GI Angle Iron 65x65x6mm, 2700 mm long bracing with 4 clamps
    342GI Top channel 100x50x6 mm., 2240 mmlong (17.70 Kg/M)
    343Clamp FOR Top Channel with Nut bolt
    344G.I. Barbed Wire
    34511 KV Pin Insulator Polymer Type as per TS
    34611 KV Polymer Disc Insulators45 KNT&C Type
    34711 KV Disc Fitting T & C type
    348PG Clamp for Rabbit
    349E- Bracket for 11 KV line
    35011 KV Danger Board with Clamp and Nuts & Bolts
    351Aluminium paint
    352Red Oxide Paint
    353Earthing Coil connected with nutbolt using Charchol and Salt
    354Stay Complete (GI Stay Rod 16x1800 mm-1 nos , Eye Bolt -1 nos, Anchor plate -1 nos,Turn Buckle-1 nos, Hellically Formed End Fitting, Square Washer and thimble, Nuts Bolt & Washers Ref- Drg - REC/RDSS/GEN/09
    355HT Guy Insulator
    356GI Stay Wire 7/10 SWG
    357HT Stay Clamp as per approved drawing-11 KV
    358Concreting Works of Poles using cement concreting foundation 1 part cement, 2 part sand, 4 part 20 mm size stone aggregate chips (1:2:4)-0.44 Cmt (11 Meter - STP ) as per approved Drawing
    359Cable laying by Horizontal Directional Drilling Method
    360Statutory Clearances including documentation,approval fee and all other charges (for National Highway)
    361Statutory Clearances including documentation,approval fee and all other charges (for State Highway)
    362Erection, Testingand commissioning of 11 KV Railway Crossing (Complete Work in all respect)
    36311 kVXLPE Cable 3x185 Sq. mm. (Armoured)
    364Heat Shrinkable Jointing Kit Outdoor for 11 KV 3x185 sq. mm XLPE Cable
    365HDPE Pipe, PN-4 PE-80(160 mm dia.) with clamp, etc
    366GI Pipe 6" Diameter with clamps
    36711 Meter long STP as per Approved Drawing and Technical specification (SP-55)
    368GI Angle Iron 65x65x6mm, 2700 mm long bracing with 4 clamps
    369GI Top channel 100x50x6 mm., 2240 mmlong (17.70 Kg/M)
    370Clamp FOR Top Channel with Nut bolt
    371G.I. Barbed Wire
    37211 KV Pin Insulator Polymer Type as per TS
    37311 KV Polymer Disc Insulators45 KNT&C Type
    37411 KV Disc Fitting T & C type
    375PG Clamp for Rabbit
    376E- Bracket for 11 KV line
    37711 KV Danger Board with Clamp and Nuts & Bolts
    378Aluminium paint
    379Red Oxide Paint
    380Earthing Coil connected with nutbolt using Charchol and Salt
    3819 KV LA , 10 KA (Station Class)
    382Stay Complete (GI Stay Rod 16x1800 mm-1 nos , Eye Bolt -1 nos, Anchor plate -1 nos,Turn Buckle-1 nos, Hellically Formed End Fitting, Square Washer and thimble, Nuts Bolt & Washers Ref- Drg - REC/RDSS/GEN/09
    383HT Guy Insulator
    384GI Stay Wire 7/10 SWG
    385HT Stay Clamp as per approved drawing-11 KV
    386Concreting Works of Poles using cement concreting foundation 1 part cement, 2 part sand, 4 part 20 mm size stone aggregate chips (1:2:4)-0.44 Cmt (11 Meter - STP ) as per approved Drawing
    387Cable laying by Horizontal Directional Drilling Method
    388Statutory Clearances including documentation,approval fee,way leave charges and all other charges (For Railway Crossing)
    389Erection, Testingand commissioning of 11 kV Line crossing by 33KV Existing Lines on STP 13 Mtr with Cradle Guarding (Complete Work in all respect)
    39013 Meter long STP as per Approved Drawing and Technical specification (SP-72)
    39133 KV Steel X-arm V type (GI Channel 100 X 50 X 6 mm )
    39233 KV Cross arm holding clamps with bolts & nuts
    39333 KV Composit Pin Insulator (Polymer Type)
    394GI. guarding Angle 75x75x6 mm 3010 mm long with Clamp
    395F- Bracket for 33 KV line
    396Turn buckle
    397G.I. Wire 6 SWG
    398G.I. Wire 8 SWG
    399G.I. Wire No. 16 SWG for binding
    400Eye Bolt
    401Helical formed Fitting
    40211 KV Danger Board with Clamp and Nuts & Bolts
    40311 KV Number Plate with Clamp and Nuts & Bolts
    404G.I. Barbed Wire
    405Red Oxide Paint
    406Aluminium paint
    407Aluminium binding wire - 6 SWG
    408Earthing Coil connected with nutbolt using Charchol and Salt
    409Earthing Arrangement ofchemical pipe size of 80mm , 3000 mm.long and 6 SWG earthing wire etc.
    41033 KV Stay Complete (GI Stay Rod 20x1800 mm-1 nos , Eye Bolt -1 nos, Anchor plate -1 nos,Turn Buckle-1 nos, Hellically Formed End Fitting, Square Washer and thimble, Nuts Bolt & Washers
    411HT Guy Insulator
    412GI Stay Wire 7/8 SWG
    413HT Stay Clamp as per approved drawing-33 KV
    414Concreting Works of Poles using cement concreting foundation 1 part cement, 2 part sand, 4 part 20 mm size stone aggregate chips (1:2:4)-0.64 Cmt (13 Meter - STP ) as per approved Drawing
    415Erection, Testingand commissioning of LT Line crossing by 11 kV Lines on STP 11 Mtr with Cradle Guarding (Complete Work in all respect)
    41611 Meter long STP as per Approved Drawing and Technical specification (SP-55)
    41711 KV Steel X-arm V type (GI Channel 65X 65 X 6 mm )
    41811 KV Cross arm holding clamps with bolts & nuts
    41911 KV Pin Insulator Polymer Type as per TS
    420F- Bracket for 11 KV line
    421Guarding angle 65x55x6 mm, 1.6 mtr. With Clamp
    422Turn buckle
    423G.I. Wire 6 SWG
    424G.I. Wire 8 SWG
    425G.I. Wire No. 16 SWG for binding
    426Eye Bolt
    427Helical formed Fitting
    42811 KV Danger Board with Clamp and Nuts & Bolts
    42911 KV Number Plate with Clamp and Nuts & Bolts
    430G.I. Barbed Wire
    431Red Oxide Paint
    432Aluminium paint
    433Aluminium binding wire - 6 SWG
    434Earthing Coil connected with nutbolt using Charchol and Salt
    435Earthing Arrangement ofchemical pipe size of 80mm , 3000 mm.long and 6 SWG earthing wire etc.
    436Stay Complete (GI Stay Rod 16x1800 mm-1 nos , Eye Bolt -1 nos, Anchor plate -1 nos,Turn Buckle-1 nos, Hellically Formed End Fitting, Square Washer and thimble, Nuts Bolt & Washers Ref- Drg - REC/RDSS/GEN/09
    437HT Guy Insulator
    438GI Stay Wire 7/8 SWG
    439HT Stay Clamp as per approved drawing-11 KV
    440Concreting Works of Poles using cement concreting foundation 1 part cement, 2 part sand, 4 part 20 mm size stone aggregate chips (1:2:4)-0.44 Cmt (11 Meter - STP ) as per approved Drawing
    441Erection, Testingand commissioning of UG Cable 11 KV Line (Complete Work in all respect)
    442Radar route survey for route profile of any utility cables,pipes etc. along the route as per TS and scope of work
    44311 kVXLPE Cable 3x185 Sq. mm. (Armoured)
    444Heat Shrinkable Jointing Kit Outdoor for 11 KV 3x185 sq. mm XLPE Cable
    445Cable jointing kit straight through (3x185)
    446GI Pipe 6" Diameter with clamps
    447Cable Route Marker
    448HDPE Pipe, PN-4 PE-80(160 mm dia.) with clamp, etc
    44911 Meter long STP as per Approved Drawing and Technical specification (SP-55)
    450GI Angle Iron 65x65x6mm, 2700 mm long bracing with 4 clamps
    451GI Top channel 100x50x6 mm., 2240 mmlong (17.70 Kg/M)
    452Clamp FOR Top Channel with Nut bolt
    453G.I. Barbed Wire
    45411 KV Pin Insulator Polymer Type as per TS
    45511 KV Polymer Disc Insulators45 KNT&C Type
    45611 KV Disc Fitting T & C type
    457PG Clamp for Rabbit
    458E- Bracket for 11 KV line
    45911 KV Danger Board with Clamp and Nuts & Bolts
    460Aluminium paint
    461Red Oxide Paint
    462Earthing Coil connected with nutbolt using Charchol and Salt
    463Stay Complete (GI Stay Rod 16x1800 mm-1 nos , Eye Bolt -1 nos, Anchor plate -1 nos,Turn Buckle-1 nos, Hellically Formed End Fitting, Square Washer and thimble, Nuts Bolt & Washers Ref- Drg - REC/RDSS/GEN/09
    464HT Guy Insulator
    465GI Stay Wire 7/10 SWG
    466HT Stay Clamp as per approved drawing-11 KV
    467Road Restoration Chages forRoad Crossing
    468Concreting Works of Poles using cement concreting foundation 1 part cement, 2 part sand, 4 part 20 mm size stone aggregate chips (1:2:4)-0.44 Cmt (11 Meter - STP ) as per approved Drawing
    469Erection, Testingand commissioningof 11/0.433 KV three phase Transformer sub-station -25 KVA ,63 KVA and 100 KVA (Complete Work in all respect)
    47025 KVA , 11/0.433 KV T/F (Level-1 Self Protected Aluminium Wound Type)
    47163 KVA , 11/0.433 KV T/F (Level-1 Self Protected Aluminium Wound Type)
    472100 KVA , 11/0.433 KV T/F (Level-1 Self Protected Aluminium Wound Type)
    4738.5 Mtr.long ,180Kg . PCC Poles as per Approved Drawing and Technical specification
    474Stone Pad (300x300x75mm)
    475GI Top channel 125x65x6 mm., 2240 mmlong
    476GI Channel 100x50x6 mm 2028 mm long (For Fuse Set )
    477GIangle 75x75x6x2028 mm with clamp &bolt and nut (T/F base)
    478Holding clamps for Top channel, GI Channel & GI Angle with bolts & nuts
    479Tee-off Channel 100x50x1300 mm with clamp, Nut & Bolt
    480Clamps for LT T-off with bolts & nuts
    48111 KV Polymer Disc Insulators45 KNT&C Type
    48211 KV Disc Fitting T & C type
    48311 KV Pin Insulator Polymer Type as per TS
    48411KV TPMO with fixing clamps
    48511KV Fuse Set (Drop out) with clamps
    4869 KV LA , 5 KA (Distribution Class)
    487LT Distribution Box withMCCB and AMI metering (Smart Meter compitable with System) equipment & fixing arrangement As per TS . (SMC Type) for 25KVA (DRG- no. REC/RDSS/DTR/SS/24)
    488LT incoming Panel with AMI metering (Smart Meter compitable with System DRG- no. REC/RDSS/DTR/SS/16) equipment & fixing arrangement As per TS . (SMC Type) for 63 KVA (DRG- no. REC/RDSS/DTR/SS/23)
    489LT incoming Panel with AMI metering (Smart Meter compitable with System DRG- no. REC/RDSS/DTR/SS/23) equipment & fixing arrangement As per TS . (SMC Type) for 100KVA (DRG- no. REC/RDSS/DTR/SS/23)
    490LT XLPE cable 4x16 Sq mm
    491LT XLPE cable 3.5x70 Sq mm
    492LT XLPE cable 3.5x150 Sq mm
    49311 KV Danger Board with Clamp and Nuts & Bolts
    494G.I. Barbed Wire
    495ACSR Rabbit Conductor -Jumpering Works
    496Stay Complete (GI Stay Rod 16x1800 mm-1 nos , Eye Bolt -1 nos, Anchor plate -1 nos,Turn Buckle-1 nos, Hellically Formed End Fitting, Square Washer and thimble, Nuts Bolt & Washers Ref- Drg - REC/RDSS/GEN/09
    497HT Guy Insulator
    498GI Stay Wire 7/10 SWG
    499HT Stay Clamp as per approved drawing-11 KV
    500Earthing Arrangement ofchemical pipe size of 80mm , 3000 mm.long and 6 SWG earthing wire etc.
    501GI Flat 25X3 for Earthing
    502Concreting Works of Poles using cement concreting foundation 1 part cement, 2 part sand, 4 part 20 mm size stone aggregate chips (1:2:4)-0.268 Cmt (8.5 Meter - PCC pole)as per approved Drawing
    503Shifting , Erection, Testingand commissioningof Existing Distribution Transformer-25 KVA ,63 KVA and 100 KVA (Complete Work in all respect)
    504Dismentaling of 25 KVA Distribution Transformer along with accessories. Relocate the DT only at new location , Testing ,commissioning and charging and other material shifting to store.
    505Dismentaling of 63 KVA Distribution Transformer along with accessories. Relocate the DT only at new location , Testing ,commissioning and charging and other material shifting to store.
    506Dismentaling of 100 KVA Distribution Transformer along with accessories. Relocate the DT only at new location , Testing ,commissioning and charging and other material shifting to store.
    5078.5 Mtr.long ,180Kg . PCC Poles as per Approved Drawing and Technical specification
    508Stone Pad (300x300x75mm)
    509GI Top channel 125x65x6 mm., 2240 mmlong
    510GI Channel 100x50x6 mm 2028 mm long (For Fuse Set )
    511GIangle 75x75x6x2028 mm with clamp &bolt and nut (T/F base)
    512Holding clamps for Top channel, GI Channel & GI Angle with bolts & nuts
    513Tee-off Channel 100x50x1300 mm with clamp, Nut & Bolt
    514Clamps for LT T-off with bolts & nuts
    51511 KV Polymer Disc Insulators45 KNT&C Type
    51611 KV Disc Fitting T & C type
    51711 KV Pin Insulator Polymer Type as per TS
    51811KV TPMO with fixing clamps
    51911KV Fuse Set (Drop out) with clamps
    5209 KV LA , 5 KA (Distribution Class)
    521LT Distribution Box withMCCB and AMI metering (Smart Meter compitable with System) equipment & fixing arrangement As per TS . (SMC Type) for 25KVA (DRG- no. REC/RDSS/DTR/SS/24)
    522LT incoming Panel with AMI metering (Smart Meter compitable with System DRG- no. REC/RDSS/DTR/SS/16) equipment & fixing arrangement As per TS . (SMC Type) for 63 KVA (DRG- no. REC/RDSS/DTR/SS/23)
    523LT incoming Panel with AMI metering (Smart Meter compitable with System DRG- no. REC/RDSS/DTR/SS/23) equipment & fixing arrangement As per TS . (SMC Type) for 100KVA (DRG- no. REC/RDSS/DTR/SS/23)
    524LT XLPE cable 4x16 Sq mm
    525LT XLPE cable 3.5x70 Sq mm
    526LT XLPE cable 3.5x150 Sq mm
    52711 KV Danger Board with Clamp and Nuts & Bolts
    528G.I. Barbed Wire
    529ACSR Rabbit Conductor -Jumpering Works
    530Stay Complete (GI Stay Rod 16x1800 mm-1 nos , Eye Bolt -1 nos, Anchor plate -1 nos,Turn Buckle-1 nos, Hellically Formed End Fitting, Square Washer and thimble, Nuts Bolt & Washers Ref- Drg - REC/RDSS/GEN/09
    531HT Guy Insulator
    532GI Stay Wire 7/10 SWG
    533HT Stay Clamp as per approved drawing-11 KV
    534Earthing Arrangement ofchemical pipe size of 80mm , 3000 mm.long and 6 SWG earthing wire etc.
    535GI Flat 25X3 for Earthing
    536Concreting Works of Poles using cement concreting foundation 1 part cement, 2 part sand, 4 part 20 mm size stone aggregate chips (1:2:4)-0.268 Cmt (8.5 Meter - PCC pole)as per approved Drawing
    537Erection, Testingand commissioningof 11/0.250 KV Single phase Transformer sub-station -10 KVA and 16 KVA (Complete Work in all respect)
    53810 KVA, 11KV/250 V, 1 Ph Transformer (Level-1 Self Protected Aluminium Wound Type)
    53916 KVA, 11KV/250 V, 1 Ph Transformer (Level-1 Self Protected Aluminium Wound Type)
    540LT Distribution Box withMCCB for protection of 10 KVA T/F and Bus Bar foroutgoing consumer connections with Energy Meter (SMC Type) as per TS. (DRG- no.REC/RDSS/DTR/SS/20 )
    541LT Distribution Box withMCCB for protection of 16 KVA T/F and Bus Bar foroutgoing consumer connections with Energy Meter (SMC Type) as per TS.( DRG- no. REC/RDSS/DTR/SS/20 )
    542Clamps for Dist. Box (40x6 mm)
    543Clamps for T/F (75x8 mm GI flat).
    544ACSR Weasel Conductor-Jumpering Works
    54511 KV Pin Insulator Polymer Type as per TS
    546Eye Bolt
    547L.T. XLPE cable 10 Sq. mm Single Core
    548Earthing Arrangement ofchemical pipe size of 80mm , 3000 mm.long and 6 SWG earthing wire etc.
    549Stay Complete (GI Stay Rod 16x1800 mm-1 nos , Eye Bolt -1 nos, Anchor plate -1 nos,Turn Buckle-1 nos, Hellically Formed End Fitting, Square Washer and thimble, Nuts Bolt & Washers Ref- Drg - REC/RDSS/GEN/09
    550HT Guy Insulator
    551GI Stay Wire 7/10 SWG
    552HT Stay Clamp as per approved drawing-11 KV
    553Shifting , Erection, Testingand commissioningof Existing Distribution Transformer-10 KVAand 16 KVA(Complete Work in all respect)
    554Dismentaling of 10 KVA Distribution Transformer along with accessories. Relocate the DT only at new location , Testing ,comissioning and charging and other material shifting to store.
    555Dismentaling of 16 KVA Distribution Transformer along with accessories. Relocate the DT only at new location , Testing ,comissioning and charging and other material shifting to store.
    556LT Distribution Box withMCCB for protection of 10 KVA T/F and Bus Bar foroutgoing consumer connections with Energy Meter (SMC Type) as per TS. (DRG- no.REC/RDSS/DTR/SS/20 )
    557LT Distribution Box withMCCB for protection of 16 KVA T/F and Bus Bar foroutgoing consumer connections with Energy Meter (SMC Type) as per TS.( DRG- no. REC/RDSS/DTR/SS/20 )
    558Clamps for Dist. Box (40x6 mm)
    559Clamps for T/F (75x8 mm GI flat).
    560ACSR Weasel Conductor-Jumpering Works
    56111 KV Pin Insulator Polymer Type as per TS
    562Eye Bolt
    563L.T. XLPE cable 10 Sq. mm Single Core
    564Earthing Arrangement ofchemical pipe size of 80mm , 3000 mm.long and 6 SWG earthing wire etc.
    565Stay Complete (GI Stay Rod 16x1800 mm-1 nos , Eye Bolt -1 nos, Anchor plate -1 nos,Turn Buckle-1 nos, Hellically Formed End Fitting, Square Washer and thimble, Nuts Bolt & Washers Ref- Drg - REC/RDSS/GEN/09
    566HT Guy Insulator
    567GI Stay Wire 7/10 SWG
    568HT Stay Clamp as per approved drawing-11 KV
    569Shifting , Erection, Testingand commissioningof Existing Distribution Transformer-250 KVA(Complete Work in all respect)
    570Dismentaling of Distribution Transformer along with accessories. Relocate the DT only at new location , Testing ,comissioning and charging and other material shifting to store.
    57111 Meter long STP as per Approved Drawing and Technical specification (SP-55)
    572GI Channel 100x50x6 mm 2028 mm long (For Fuse Set )
    573Holding clamps for Top channel, GI Channel & GI Angle with bolts & nuts
    574GI Top channel 125x65x6 mm., 2240 mmlong
    575GIangle 75x75x6x2028 mm with clamp &bolt and nut (T/F base)
    576GI Channel 75x75x6 mm &bolt and nut (T/F base Support)
    57711 KV Polymer Disc Insulators45 KNT&C Type
    57811 KV Disc Fitting T & C type
    579Tee-off Channel 100x50x1300 mm with clamp, Nut & Bolt
    580Clamps for LT T-off with bolts & nuts
    58111 KV Pin Insulator Polymer Type as per TS
    58211KV TPMO with fixing clamps
    58311KV Fuse Set (Drop out) with clamps
    584LT incoming Panel with AMI metering (Smart Meter compitable with System DRG- no. REC/RDSS/DTR/SS/23) equipment & fixing arrangement as per TS. (SMC Type) for 250KVA (DRG- no. REC/RDSS/DTR/SS/22)
    585Copper L-Piece 50x225x10mm
    586Copper L-Piece 50x225x12mm
    587LT XLPE cable 3.5x400 Sq mm
    588Al Lug long barrel off size
    58911 KV Danger Board with Clamp and Nuts & Bolts
    590G.I. Barbed Wire
    591Stay Complete (GI Stay Rod 16x1800 mm-1 nos , Eye Bolt -1 nos, Anchor plate -1 nos,Turn Buckle-1 nos, Hellically Formed End Fitting, Square Washer and thimble, Nuts Bolt & Washers Ref- Drg - REC/RDSS/GEN/09
    592HT Guy Insulator
    593GI Stay Wire 7/10 SWG
    594HT Stay Clamp as per approved drawing-11 KV
    595Earthing Arrangement ofchemical pipe size of 80mm , 3000 mm.long and 6 SWG earthing wire etc.
    596GI Flat 50X6 for Earthing
    597GI Channel 125x65 mm
    5989 KV LA , 5 KA (Distribution Class)
    599Crimping type heavy duty aluminium lugs suitable for connection XLPE cables
    600PG Clamp for Rabbit
    601Concreting Works of Poles using cement concreting foundation 1 part cement, 2 part sand, 4 part 20 mm size stone aggregate chips (1:2:4)-0.44 Cmt (11 Meter - STP ) as per approved Drawing
    602DT"s Plinth Foundation
    603Erection, Testingand commissioning of New LT Line With AB Cable(Complete Work in all respect)
    6048.5 Mtr.long ,180Kg . PCC Poles as per Approved Drawing and Technical specification
    605Stone Pad (300x300x75mm)
    606Aerial Bunched XLPE Cable 1X16 (Ph) + 1X25 ( Bare messenger cum neutral) sqmm
    607Aerial Bunched XLPE Cable 3X50 (Ph) + 1X35 ( Bare messenger cum neutral) + 1x16 (insulated Street lighting) sqmm
    608Aerial Bunched XLPE Cable 3X95 (Ph) + 1X70 ( Bare messenger cum neutral) + 1x16 (insulated Street lighting) sqmm
    609Pole Clamps with with I-Hook & nut & bolts for laying ABC
    610Dead End clamp (Insulated)
    611Suspension clamps (Insulated)
    612End Cap for AB cable
    613PG Clamps 16 Sq mm .- 50 sq mm (For line to line jumpering of massenger wire & energizing DB Neutral)
    614Insulating Piercing Connector (16-150 sq.mm)
    6151x25 mm2 Un-armoured XLPE insulated Al. LT Cable for energising the distribution boxes.
    616Single phase Glass Fiber Reinforced Polyester Sheet Moulding Compound (SMC) Pole top distribution box with clamps (40x3 mm) and nut & bolts
    617Three phase Glass Fiber Reinforced Polyester Sheet Moulding Compound (SMC)Pole top distribution box with clamps (40x3 mm) and nut & bolts
    618Earthing Coil connected with nutbolt using Charchol and Salt
    619Stay Complete (GI Stay Rod 16x1800 mm-1 nos , Eye Bolt -1 nos, Anchor plate -1 nos,Turn Buckle-1 nos, Hellically Formed End Fitting, Square Washer and thimble, Nuts Bolt & Washers Ref- Drg - REC/RDSS/GEN/09
    620LT Guy Insulator
    621GI Stay Wire 7/10 SWG
    622LT Stay Clamp as per approved drawing
    623Concreting Works of Poles using cement concreting foundation 1 part cement, 2 part sand, 4 part 20 mm size stone aggregate chips (1:2:4)-0.268 Cmt (8.5 Meter - PCC pole)as per approved Drawing
    624Erection, Testingand commissioning of 11KV Line Guarding (Complete Work in all respect)
    625Guarding angle 65x55x6 mm, 1.6 mtr. With Clamp
    626Height raising channel 100x50,2240 mm long
    627Back clamp for Height raising channel holding clamps with bolts & nuts
    628G.I. Wire 6 SWG
    629G.I. Wire 8 SWG
    630Turn Buckle
    631Eye Bolt
    632G.I. Wire No. 16 SWG for binding
    633Earthing Arrangement ofchemical pipe size of 80mm , 3000 mm.long and 6 SWG earthing wire etc.
    634Stay Complete (GI Stay Rod 16x1800 mm-1 nos , Eye Bolt -1 nos, Anchor plate -1 nos,Turn Buckle-1 nos, Hellically Formed End Fitting, Square Washer and thimble, Nuts Bolt & Washers Ref- Drg - REC/RDSS/GEN/09
    635HT Guy Insulator
    636GI Stay Wire 7/10 SWG
    637HT Stay Clamp as per approved drawing-11 KV
    638Erection, Testingand commissioning of Tee Of Channel (Complete Work in all respect)
    639Tee-off Channel 100x50x1300 mm with clamp, Nut & Bolt
    640GI Channel clamp with nuts & bolts
    64111 KV Polymer Disc Insulators45 KNT&C Type
    64211 KV Disc Fitting T & C type
    64311 KV Pin Insulator Polymer Type as per TS
    644PG Clamp for Rabbit
    645Stay Complete (GI Stay Rod 16x1800 mm-1 nos , Eye Bolt -1 nos, Anchor plate -1 nos,Turn Buckle-1 nos, Hellically Formed End Fitting, Square Washer and thimble, Nuts Bolt & Washers Ref- Drg - REC/RDSS/GEN/09
    646HT Guy Insulator
    647GI Stay Wire 7/10 SWG
    648HT Stay Clamp as per approved drawing-11 KV
    649Installation of Sign Board with as per TS and Approved Drawing
    650Sign Board as per TS and Approved Drawing
    651Control Room Building Extention work (Complete Work in all respect)
    652RCC Work of Building with Internal wiring works for Extension of Control room Building (36 Sqmtr) (Complete Works in all respect) as per approved drawing and specification
    653Water pump, Toilet works as per approved drawing and specification
    Disclaimer :
    We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
    Tell us about your Product / Services,
    We will Find Tenders for you
    Cnet Technologies

    We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.

    About Us

    Services

    Browse Tenders

    For Sales Inquiry

    Connect With Us

    Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

    For Tender Information Services Visit : TenderDetail