|
| 1 | Excavation in foundation, trenches etc., in earth work, lift up to 1.50 Meters stacking the excavated soil not more than 3 meters clear from the edge of the excavation and then returning the stacked soil in 15 cm, layers, when required in to plinths sides of foundations etc., |
| 2 | Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 3 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :inCM 1:6(1Cement :6 Sand) |
| 4 | Providing and laying cement concrete 1:2:4(1cement: 2sand: 4graded stone aggregate 20mm nominal size) and curing complete |
| 5 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth levelMild steel and Medium Tensile steel bars |
| 6 | Centering and shuttering including strutting, proppingetc. and removal of form for Suspended floors, roofs, landings, balconies and access platform |
| 7 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required In gratings, frames, guard bar, ladder,railings, brackets, gates and similar works |
| 8 | Supply and fixing galvanized steel bar-bed wire (IS:278-1962 Type-I) weighing 9.38 kg per 100 metres (minimum) straining and fixing to any type of standard rails, straining bolts including securing with and provision of galvanized mild steel wire, staples or Steel pins etc. as directed (posts and struts of wood concrete, steel etc. and straining bolts shall be paid |
| 9 | 15 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall. |
| 10 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of requiredshade and colour complete, as per manufacturer’s specification Two or more coats on new work |
