Urban Development Department-UDD has published Beautification Of Pond Near Town Masjid Under Sonamura Nagar Panchayat During The Year 2021-2022.. Submission Date for this Tender is 20-08-2022. Lake Development Tenders in sonamura Tripura. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. |
2 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) in/c dressing of sides and ramming of bottoms, lift upto 1.5 m, in/c getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. In or under water and/ or liquid mud, including pumping out water as required. |
3 | Supplying and filling in plinth, under floor, foundations etc. with sand from local quarry with all lifts in/c spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete. |
4 | Providing and laying in position cement concrete of specified grade ex/c the cost of centring and shuttering. All work upto plinth level:1:2:4(1 Cement : 2 fine sand : 4 graded stone aggregate 20mm nominal size) |
5 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring and shuttering, finishing and reinforcement. Allwork upto plinth level: 1 : 2 : 4 (1 cement : 2 fine sand : 4 graded stone aggregate of 20 mm nominal size) |
6 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level / above plinth level. Thermo-Mechanically Treated bars. TMT bars |
7 | Centering shuttering including strutting, propping etc. and removal of form work for: Walls (any thickness) including attached pilasters, buttresses, plinth and stringcourses etc. using shuttering ply. |
8 | Providing and laying brick on edge flooring in cement mortar including cement slurry etc. complete. In cement mortar 1:4 (1 cement : 4 fine sand) |
9 | First class brick work in foundation and plinth including cost of all materials as required complete:-In cement mortar 1:3 (1 cement : 3 fine sand) |
10 | 20 mm cement plaster of mix.In cement mortar 1:3 (1 cement : 3 fine sand) |
11 | Neat cement punning. |
12 | Filling available excavated earth (ex/c rock) in trenches, plinth, sides of foundations etc. in layers each not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. All kinds of soil |
13 | Providing and fixing stainless steel railing made of Hollow tubes, channels, plates etc., in/c welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, in/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of requiredsize, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered ex/c fixing accessories such as nuts, bolts, fasteners etc.). |
14 | Providing and fixing chequered terrazo tiles 22 mm thick with graded marble chips of size upto 6 mm, laid on floors, footpath & courtyard on 20 mm thick bed of cement mortar 1 : 4 ( 1 cement : 4 fine sand ) jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and polishing complete. Light shade pigment using white cement. |
15 | Finishing walls with acrylic smooth exterior paint of required shade of approved brand and manufacture. New work (two or more coats applied @ 1.67 litre/10 sqm over and including priming coat of exterior primer). |
16 | Providing weep holes in brick masonry/ stone masonry, plain/ reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe or PVC pipe (110 mm OD of 6.0 Kg/cm2pressure) extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and MoRD technical specification clauses 614, 709, 1204.3.7. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail