Construction Of 50 Bedded Sub District Hospital At Pachora, Tal. Pachora Dist. Jalgaon ( Main Building )
Tender Value
17.41 Crore
Estimated cost
Bid Submission
23 Aug 2022
0 days left
EMD
8.75 Lakhs
Bank guarantee accepted
Document Fee
3540
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
pachora → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of 50 Bedded Sub District Hospital At Pachora, Tal. Pachora Dist. Jalgaon ( Main Building )
BOQ
| Sl. No. | Item Description |
| 1 | Labourchargesforremovinggrass,thorneyshrubs,Junglishrub,Kubabulandalikegrass along roadside making the ground clean by showel and phavaras etc. complete. |
| 2 | Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removingtheexcavatedmaterialuptoadistanceof50m.beyondthebuildingareaand stackingandspreadingasdirected,dewatering,preparingthebedforthefoundationand necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means |
| 3 | Excavationforfoundationinhardmurum includingremovingtheexcavatedmaterialupto distanceof50metresbeyondthebuildingareaandstackingandspreadingasdirected, dewatering,preparingthebedforthefoundationandnecessarybackfilling,ramming, wateringincludingshoringandstruttingetc.complete.(Liftupto1.50m)ByMechanical Means |
| 4 | Excavationforfoundationinhardmurumandbouldersincludingremovingtheexcavated material up to a distance 50 metres, beyond the building area and stacking and spreading as directed,dewatering,preparingthebedforthefoundationandnecessarybackfilling, ramming,wateringincludingshoringandstruttingetc.complete.(Liftupto1.5m.)By Mechanical Means |
| 5 | Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth /murum, ramming, watering including shoring and strutting etc. complete (lift upto 1.5m)By Mechanical Means |
| 6 | Excavationfor foundationin Hardrock by chiselling, wedging, line drilling, etc. including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyondthebuildingareastackingasdirected,dewateringandbackfillingwithavailable earth/ murum watering, ramming etc. complete. (Lift upto 1.5 m). By Mechanical Means |
| 7 | ProvidingpreconstructionalantitermitetreatmentasperI.S.6313(Part-II)bytreatingthe bottom surface and sides of excavation at the rate of 5 litres of emulsion concentrate of 1.0 percentofchlorophyrifospersquaremeterofsurfaceareacovering10yearsguaranteeon bond paper. |
| 8 | ProvidingpreconstructionalantitermitetreatmentasperI.S.6313(Part-II)treatmentby treating the backfill in immediate contact with foundation at the rate of 5 litres of emulsion concentrate of 1.0 percent of clorophyrifos per square metre of vertical surface area covering 10 years guarantee on bond paper. |
| 9 | Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the top surfaceofplinthfillingattherateof5litresofemulsionconcentrateat1.0percentof clorophyrifosper square metre of surface area covering ten years guarantee on bond paper. |
| 10 | Providing preconstructional antitermite treatment as per I.S. 6313 (Part-I) to the soil along the external face of building by punching holes of 1.2 of 1.5 C.M. diametre about 30 -60 cm deep at15cmc/casclosetothewallaspossibleandtoinject0.5percentof aldrinor clorophyrifosatthe rate of7.5litresperhole andsealing the same withproper filling and covering 10 years guarantee on bond paper. |
| 11 | Providingsoling using80mm sizetrapmetalin15cm.layerincludingfilling voidswith Crushed sand/grit, ramming, watering etc. complete. |
| 12 | Fillinginplinthandfloorswith approved excavatedmaterialin15cm.to20cm.Layers including watering and compacting etc. complete. |
| 13 | Filling in plinth and floors with contractorsmaterial/brought from outside and approved by Engineerincharge inlayersof15cm to20cmincludingwateringandcompactionetc.complete. |
| 14 | Providing and laying Cast in situ/Ready Mixcement concrete in M15 of trap/ granite/quartzite/gneiss metal for steps including steel centering, formwork, laying/pumping, compacting,rougheningthemifspecialfinishistobeprovided,finishingunevenand honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. Newly laid concrete shall be covered bygunnybag,plastic,tarpaulinetc.(Woodencenteringwillnotbeallowed.),withfully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concreteBatchmixplant(Panmixer)etc.complete.Withfineaggregate(Crushedsand VSI Grade) |
| 15 | ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-25oftrap/granite/quartzite/gneissmetalforR.C.C.workinfoundationslike raft,strip foundations,grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water,Steel centering,formwork,coverblocks,laying/pumping,compactionandcuring roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 16 | ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-25oftrap/granite /quartzite/gneissmetalforR.C.C.columnsasperdetaileddesignsanddrawingsoras directedincludingsteelcentering,formwork,coverblocks,laying/pumping,compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smoothand even surface or roughening if special finish is to be providedand curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 17 | Ground floor |
| 18 | First floor |
| 19 | Second floor |
| 20 | Third floor |
| 21 | ProvidingandlayingCastinsitu/ReadyMixcementconcreteinM-25oftrap/granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping,compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcementandstructuralsteel).withfullyautomaticmicroprocessorbasedPLCwith SCADAenabledreversibleDrumTypemixer/concreteBatchmixplant(Panmixer)etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 22 | Ground floor |
| 23 | First floor |
| 24 | Second floor |
| 25 | Third floor |
| 26 | ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-25oftrap/granite/ quartzite/ gneiss metal for R.C.C.slabs andlandingsasper detaileddesigns anddrawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 27 | Ground floor |
| 28 | First floor |
| 29 | Second floor |
| 30 | Third floor |
| 31 | ProvidingandlayingCastinsitu/ReadyMixcementconcretein M-25oftrap/quartzite /granite /gneiss metal for R.C.C. Waist slab, and steps of staircases as per detailed design and drawingsorasdirectedincludingsteelcentering,plywood/steelformwork,steelprops, laying/pumping,compaction,finishing unevenandhoneycombedsurface withC.M.1:3of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fullyautomaticmicroprocessorbasedPLCwithSCADAenabledreversibleDrumType mixer/concreteBatchmixplant(Panmixer)etc.complete.Withfineaggregate(Crushed sand VSI Grade) |
| 32 | Ground floor |
| 33 | First floor |
| 34 | Second floor |
| 35 | ProvidingandlayingCastinsitu/ReadyMixcementconcreteinM-25oftrap/granite/ quartzite/gneissmetalforR.C.C.pardiofrequiredthicknessincludingsteelcentering, formwork, cover blocks, laying/pumping,compacting and roughening them if special finish istobeprovidedandcuringcomplete.(Excludingreinforcementandstructuralsteel).with fullyautomaticmicroprocessorbasedPLCwithSCADAenabledreversibleDrumType mixer/concreteBatchmixplant(Panmixer)etc.complete.Withfineaggregate(Crushed sand VSI Grade) |
| 36 | Ground floor |
| 37 | First floor |
| 38 | Second floor |
| 39 | Third floor |
| 40 | Providing and laying Cast in situ/Ready Mixcement concrete M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting androughening the surface ifspecial finish is to be provided and curing complete. (Excluding reinforcement and structural steel). withfullyautomaticmicroprocessorbasedPLCwithSCADA enabledreversibleDrum Typemixer/concreteBatchmixplant(Panmixer)etc.complete.Withfineaggregate (Crushed sand VSI Grade) |
| 41 | Ground floor |
| 42 | First floor |
| 43 | Second floor |
| 44 | ProvidingandlayingCastinsitu/ReadyMixcementconcreteinM-20oftrap/granite/ quartzite/ gneiss metal for R.C.C.coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including steel centering,formwork,coverblocks,laying/pumping,compacting,curing,finishingand rougheningthemifspecialfinishistobeprovidedandcuringcomplete.(Excluding reinforcementandstructuralsteel).withfullyautomaticmicroprocessorbasedPLCwith SCADAenabledreversibleDrumTypemixer/concreteBatchmixplant(Panmixer)etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 45 | Ground floor |
| 46 | Third floor |
| 47 | Providing cast in situ / ready mix M20 grade cement concrete for head walls of CD work / retainingwallsetc.includingnecessaryformwork,compaction,finishingandcuringetc. complete.(withreversibledrumtypemixer/concretebatchmixplant(panmixer) withSCADA |
| 48 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters forR.C.C.pilecaps,footings,foundations,slabs,beamscolumns,canopies,staircase,newels, chajjas,lintelspardis,copings,fins,archesetc.asperdetaileddesigns,drawingsand schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. |
| 49 | Ground floor |
| 50 | First floor |
| 51 | Second floor |
| 52 | Third floor |
| 53 | Providing and fabricating structural steel work in rolled sections like joists, channels, angles, teesetc.asperdetaileddesignanddrawingsorasdirectedincludingcutting,fabricating, hoisting,erecting,fixinginpositionmakingriveted/bolted/weldedconnectionswithout connecting plates, braces etc. andincluding one coat of anticorrosive paint andover ittwo coats of oil painting of approved quality and shade etc. complete. |
| 54 | Ground floor |
| 55 | Second floor |
| 56 | Providing expansion joints in R.C.C. framed structure (interior column) with plain premoulded filler 25 mm thick including fixing T.W. battens on both faces and finishing asdirected etc. Complete. |
| 57 | Providingexpansion jointsin R.C.C.framed structure(exteriorColumns)with plainpremouldedfiller25mmthickand3mmthickalluminiumplate,holdfast,fixingT.W. battens on internal face, finishing etc. complete as directed. |
| 58 | Providing expansion joints in R.C.C. framed structure (at floor level) with premoulded filler 25 mm thick and 3 mm thick aluminium plate as required, bitumen poured filler and fixingT.W. battens on rear faces etc. complete as directed. |
| 59 | Providing expansion joints in R.C.C. framed structure (at terrace level) with premoulded filler 25 mm thick and3 mm thick aluminium plate as required, bituminous pouredfiller, fixing lead, flashing on upper side and T.W. battens on inner face finishing etc. Complete as directed. |
| 60 | ProvidingfirstclassBurntBrickmasonrywithconventional/I.S.typebricksincement mortar 1:6 in plinth including bailing out water manually, striking joints on unexposed faces, pointing with cement mortar1:3 on exposed face and watering etc. Complete. |
| 61 | ProvidingAutoclavedAeratedConcreteBlockmasonaryofEcoliteorequivalentmake conforming to IS:2185 (Part 3) - 1984 in extra fine jointing mortar of fixoblock of UltraTech or equivalent in superstructure including striking joints, raking out joints and scaffolding etc. Complete. (The test shall be carried out conforming to IS:6441 (Part I) - 1972) |
| 62 | Ground floor |
| 63 | First floor |
| 64 | Second floor |
| 65 | Third floor |
| 66 | ProvidingAutoclavedAeratedConcreteBlockmasonaryofEcoliteorequivalentmake conforming to IS:2185 (Part 3) - 1984 in extra fine jointing mortar of fixoblock of UltraTech orequivalentinHalfbrickthickwallincludingstrikingjoints,rakingoutjointsand scaffolding etc. Complete. (The test shall be carried out conforming to IS:6441 (Part I) - 1972) |
| 67 | Ground floor |
| 68 | First floor |
| 69 | Second floor |
| 70 | Providing and applying gypsum plaster ( with Gypsum material of Gypsum India / Mega Sign or equivalent make ) with finishing with gypsum material in 10 to 13 millimeter thickness to previously plastered surface / or on newly brick surface ( Excluding rough cast plaster ) in all position including preparing and Finishing the surface scaffolding etc.complete. |
| 71 | Ground floor |
| 72 | First floor |
| 73 | Second floor |
| 74 | Providinginternalcementplaster12mm thickinsinglecoatincementmortar1:4without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. |
| 75 | Ground floor |
| 76 | First floor |
| 77 | Second floor |
| 78 | Providing andapplying plaster withplaster of paris in 6mm thickness to previously plaster surface in all position including preparing the surface scaffolding etc. complete. |
| 79 | Ground floor |
| 80 | First floor |
| 81 | Second floor |
| 82 | Providingsandfacedplasterexternallyincementmortarusingapprovedscreenedsand,inallpositions including base coat of 15 mm thick in cement mortar 1:4 using waterproofingcompoundat 1Kilogramper cement bag curing the same for not less than 2 days and keeping thesurfaceofthebasecoat roughtoreceivethesandfacedtreatment6to8mm thickin cementmortar1:4finishingthesurface bytakingoutgrainsandcuringforfourteendays scaffolding etc.complete. |
| 83 | Ground floor |
| 84 | First floor |
| 85 | Second floor |
| 86 | Third floor |
| 87 | ProvidingandapplyingTextureplasterwithfinishingwithtexturematerial ofapproved makein 3 to 4 millimeterthickness on previously plastered surface, including Plaster Groove 6mmthicknessorTape Grooves 35 to 45 mm thickness or as required, in all positionincludingpreparingthesurface,scaffolding etc. complete. |
| 88 | Ground floor |
| 89 | Providing and fixing mild steel grill work for windows, ventilators etc. 20 Kilogram/Square Metre asperdrawing including fixtures,necessarywelding andpainting withone coatsof anticorrosive paint and two coats of oil painting complete. |
| 90 | Ground floor |
| 91 | First floor |
| 92 | Second floor |
| 93 | Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete |
| 94 | Ground floor |
| 95 | Providing and fixing Country cut teak wood double or single leaf panelled shutters, 35 mm thick style top and freze rail 95 x 35 thick with lock and bottam rail 195 x 25 mm thick and panelswithoutventilatorasperdetaileddrawingexcludingthedoorframe,stainlesssteel fixtures and fastening and finishing the wood work with oil painting 3 coats complete |
| 96 | Ground floor |
| 97 | Providing and fixing 34 mm thick moulded door shutter consisting of solid core single leaf flush door of 30 mm thickness lipped with 15 mm ( 5mm x 3) thick x 30 mm width on one style and top rail and 10 mm (5mm x 2) thick x 30 mm width on other style and bottom rails. Theinnerpanelslaminatedwith2mmthicktermiteproof,waterproofandfireresistant mouldedPVC sheet with2,4,6 design in different plainand /or prelim colours on one side after routing the moulded design on flush doors and 2 mm plain and /or pre lam PVC on other side using rubber adhesive on flush door and solvent cement adhesive on the PVC lipping etc. asperdirectionofEngineerinchargeandmanufacturersspecificationanddrawingetc.complete. |
| 98 | Ground floor |
| 99 | First floor |
| 100 | Second floor |
| 101 | Providing & fixing factory-made Single leaf 2 hour fire rated dooras per IS 3614 Part 2 & BS476Part20&22,testedtoUL10CandconformingtoNFPA80,testedatNTL/CBRI/ARAI of Plain Steel finish type with a.) Frame of size 143x58 mm and thickness of1.6 mm thick skin pass galvanized iron sheet (Conform to IS 277 ) formed to single or double rebate profile b.)Shutterof46mm thicknessandconstructedfrom 1.2mm thickskinpas galvanized iron sheet (Conform to IS 277) infill Rockwool / Mineral wool/ Honey comb craft paperc.)Visionglassof5mmthickclear/wiredglassCircularorRectangulard.)Finish: Primed with zinc phosphate stoving primer and finished with Polyurethane aliphatic grade or epoxy paint as required of thickness 60 microne.) Accessories : Min 8 Anchor fastener of HILTImake,min3SSBallBearingButtHinges,Mortisesashlockwithleverhandle, Mortise dead bolt , Mortise latch , Door closer , Panic bar and external trim lock and Flush bolts complete. |
| 102 | Ground floor |
| 103 | Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S. 62481979) (Without mechanical gear) |
| 104 | Providing and fixing chicken mesh of 22 gauge, with about 30 cm. width at the junction ofR.C.Cmembersandbrickwork,ofapprovedqualityincludingfixing meshinpositionby necessary drilling in concrete /B.B.masonry and or tying by binding wire etc. complete. |
| 105 | Ground floor |
| 106 | First floor |
| 107 | Second floor |
| 108 | Providingandfixing30mmthick SOLIDPANELPVCINTERNALDOORSHUTTER consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 40mm x 20mm for stiles ,top, lock and bottom rails. M.S. frame shall have a coat of steel primers of approved makeandmanufacture.M.S.frameshallbecoveredwith5mmthickheatmolded PVC channel of size 30 x 100mm forming stiles, and 5mm thick, 125mm wide PVC sheets for top rail, lock rail and bottom rail on either side, and 15mm (5mm x 3) thick, 20mm wide cross PVC sheet as gap insert for top rail and bottom rail. Paneling of 10 mm thick prelam PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles and rails with 30mm wide x 5mmthickPVCsheetbeadingoneitherside,andjoinedtogetherwithsolventcement adhesive etc. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the C Channel using PVC solvent cement adhesive. including stainless steel fixtures and fastening Complete as per direction of Engineerincharge,manufacturer\"sspecification anddrawing. |
| 109 | Ground floor |
| 110 | First floor |
| 111 | Second floor |
| 112 | Providing &fixing factory-made steeldoorofSingle leaf ExternalEmbossedWoodfinish typewitha.)frameofsize 100x58mm conformingto IS:4351-2003,1.2mm thickpre galvanizedsheetwithmitredandweldedcones, frame stretches, hinge reinforcing plates, fixingplatesandhardwaremountingplatesandPolyurethanefoaminfillb.)Shutterof thickness 46mm made of 0.8 mm thick slip coatedpre galvanizedsteel sheet on bothsides conforming to ASTM A527/ASTM A525, BS 2989 1994, IS 277 , Zinc coating 120 GSM . Lock formedpanels withinternal stiffeners of 3mm thick made of galvanizedsheet, 3mm thick hinge reinforcing hardware mounting plates and lock protection with Honey-comb craft paper infill of thickness 150 GSM of load bearing capacity 500 Kilogram/Square Metre. c.) Finish:PowdercoatedsurfacefinishedwiththermosettingpolyurethanepaintofAliphatic grade of thickness 60-micron d.)Accessories: Min 8 Anchor fastener of HILTI make, min 3 SS Ball Bearing Butt Hinges of Dorset make, Dorset Mortise lock, SS Tower bolt of 200 mmsize, Eye hole, Door stopper complete. |
| 113 | Ground floor |
| 114 | Providing andfixing inposition(asper1868/1982)Aluminium sliding windowofthree tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 Kilogram/Running metre. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 Kilogram/Running metre.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kilogram/Runningmetre.Theshuttershouldbeofbearingbottom40x18x1.25mmat weight 0.417Kilogram/Running metre.Inter locking section 40x 18x 1.10mm atweight 0.469Kilogram/Runningmetre.andhandleandtopsection40x18x1.25mm atweighto.417Kilogram/Runningmetre.Asperdetaileddrawingsandasdirectedby Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mmthickplainglassandaluminiummosquitonetshutterwithstainlesssteeljailwithall required screws and nuts etc, complete. With powder coating without box |
| 115 | Ground floor |
| 116 | First floor |
| 117 | Second floor |
| 118 | Providing and fixing in position powder coated aluminium louvered windows / ventilator of varioussizeswithpowdercoatingasperdetaileddrawingandspecificationsincluding aluminiumframes80x38mmx1.22mmboxtype,5mmthicksheetglasslouvers,ofapproved quality etc. complete. |
| 119 | Ground floor |
| 120 | First floor |
| 121 | Second floor |
| 122 | Providngandfixinginpositionanodisedextrudedaluminumpartitions,partlyglazedand partly laminated having frame made out of extruded tubular section of size 40 mm x 60 mm with 12 mm thick three layered flat pressed teak wood particle board bonded with BWP type exterior grade phenol formaldehyde synthetic resin conforming to IS 128231990, laminated on both sides,Novateakor equivalent and 5 mm thick selected quality plain/ float glass panels fixedwithaluminum glassclips12mm x12mm andrubbercushioningbeadingtoglass partitions as per approved drawing etc. compete |
| 123 | Ground floor |
| 124 | Providing and fixing fly proof mesh shutter toventilator / window using CCTW members of size 45 x22 mm for frame work and35 x 22 mm for middle support andfixing fly proof mesh on it and coveringTW battens of size 20 x 10 mm including priming and two coats of oil painting to the new wood and steel work and all labour charges including all fixture and fastenings etc. complete |
| 125 | Ground floor |
| 126 | Providing and fixing aluminium grill diamond mesh type DG202 of 7.5 mm thick including fixinginpositionanodisedaluminium framesectionof80x38mm x1.22mm sizebox, cutting to the required size with all wastage , labour, lead lift etc. complete. |
| 127 | Ground floor |
| 128 | Providing and fixing M40 grade thick vibrated pull cast or similar type concrete frame with chamfer conforming to I.S. 65241983 having 6 mm dia bars 3 Nos. And strips @250 mm c/c and fixing in wall with 6 Nos. of hold fast of 12 mm dia bars 500 mm long including primer and oil painting etc, complete) frame size 60 mm x 125 mm |
| 129 | Ground floor |
| 130 | First floor |
| 131 | Second floor |
| 132 | Providingandlayingtelephoneblack/AmbaWhite/Cadburybrown/Rubyred/Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing,etc. complete. |
| 133 | Ground floor |
| 134 | First floor |
| 135 | Second floor |
| 136 | Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Rubyred / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete. |
| 137 | Ground floor |
| 138 | First floor |
| 139 | Second floor |
| 140 | Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade withfullmoulding and three grooved line forthetreadsonbedof1:4Cementmortarincludingfloatfilling jointswithneatcement slurry curing polishing and cleaningetc. complete. |
| 141 | Ground floor |
| 142 | First floor |
| 143 | Second floor |
| 144 | Providing and fixing machine cut mirror polished 18 mm to 20 mm thick telephone black / AmbaWhite/Catbarybrown/RBIred/OceanBrowngranitestonepartitionwithfull moulding the edgesetc. complete. One side polish |
| 145 | Ground floor |
| 146 | First floor |
| 147 | Second floor |
| 148 | Providing and laying vitrified matt fininsh tileshaving size 595 mm to 600 mm x to 595 mm to 600 mmof8to10mmthicknessandconfirmingIS.15622-2006(GroupBla)ofapprovedmake, shadeandpatternforflooringinrequiredpositionlaidonabedof1:4cementmorar including neat cement float, filling joints, curing and cleaning etc. complete. |
| 149 | Ground floor |
| 150 | First floor |
| 151 | Second floor |
| 152 | Providing and laying polished hand cut Kotah Stone flooring 25mm to 30mm thick and 45cm to 55cm wide in plain/diamondpatternonabedof1:6C.M.including cementfloat,filling jointswithneatcementslurry, curing, polishing and cleaning complete. |
| 153 | Ground floor |
| 154 | First floor |
| 155 | Second floor |
| 156 | Providing and laying vitrified matt fininsh tileshaving size 595 mm to 600 mm x to 595 mm to 600 mmof8to10mmthicknessandconfirmingIS.15622-2006(GroupBla)ofapprovedmake, shadeandpatternfordadoandskirtinginrequiredpositionfixedin1:4cementmortar including neat cement float, filling joints, curing and cleaning etc. complete. |
| 157 | Ground floor |
| 158 | First floor |
| 159 | Second floor |
| 160 | Providing and laying matt finish ceramic tiles of having size 30 cm x 30 cm confirming to I.S.15622/2006 (groupDII-A)and7to8mm thickforflooring inrequiredpositionlaidonabedof1:4cementmortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete. |
| 161 | Ground floor |
| 162 | First floor |
| 163 | Second floor |
| 164 | Providing and laying ceramic tiles having size 30 cm. x 60 cm. confirming to correspondingI.S.for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. |
| 165 | Ground floor |
| 166 | First floor |
| 167 | Second floor |
| 168 | Providing andconstructing granite kitchenplatform withfixing of stainlesssteelsink 600 mm x 450mm size as per detaileddrawing including vertical bothside polishedkadappah stone 25 to 30 mm thick supports with kadappahtop 35 to 40 mm thick and polished granite 16 to 20 mm top with side strips of granite at front and both sides of platform raised with two verticalgranitesupports15cmheightandtopgraniteof75x40cmincludingcutting, opening for sink of required size in kadappah as well as granite etc. complete. (Platform topsize 5.00 m x 0.60 m and height is 0.75 m) |
| 169 | Ground floor |
| 170 | First floor |
| 171 | Second floor |
| 172 | Kitchen TrolleyProviding and Fixing stainless steel kitchen trolley of overall 26 \" height and 22\" depth,supported on aluminium pipes ,trolley basket made out of 5 mm stainless steel rod fitted on telescopic channel of size 1.5 \" x 20 \" x 22 \" on both sides of trolley of 12 \" or above size, panelhaving40Kilogramloadbearingcapacityoftrolleymadeoutof20mm PUCcoated plywood and colour combination as directed by E-I-C.Inner side of panel covered by white mica ,100 mm s.s. decorative handle.(The width and height of individual compartments shall be kept as directed by Engineer-in-charge) |
| 173 | Ground floor |
| 174 | First floor |
| 175 | Second floor |
| 176 | Providing andapplying 2 coats of 100% Pure acrylic low VOCandAPEO& HCHOfree waterbasedpaintofapprovedcolourthatbelongstoclass1flamespreadresistanceof approvedmake Paint should provide durable and long lasting silk finish witha highcrack tolerance of upto 1mm. Paint should have an oustanding washability with high resistance to wide range of bacteria andfungus. Painthas tobe appliedon smoothanduniform surface prepared by an acrylic copolymer low VOC & Odour putty. This surface should be primed withwater based low VOC Primer. The work activity shouldcover all aspects of applyingpaints from surface preparation as directed by Engineer in charge. |
| 177 | Ground floor |
| 178 | First floor |
| 179 | Second floor |
| 180 | Providingandapplying antipeelpaintofapproved make& approvedbrandexterior Emulsion paint of approved quality, colour and shade to old and new surface in two coats, including exterior acrylic primer coat, scaffolding, preparing the surface etc. complete (HeatReflective Paint). |
| 181 | Ground floor |
| 182 | First floor |
| 183 | Second floor |
| 184 | Providing andapplying twocoatsofHighAlbedopainthavingminimum SolarReflective Index (SRI) 108 (with solar reflectance & thermal emittance tested as per ASTM) C 1549 and ASTMC1371respectively,VOClessthan10cc/gm.Thecoatingthicknessandthe methodology of application shall strctly as per manufacturer\"s specifitions and as approved by engineer in charge. Surface preparation includes cleaning with metal wire brush to remove all dust, fungus etc, washing with water all complete.The contractor shall give guarantee for the performanceofSRIandalsothedurabitityofcoating,allcompleteasperdirectionofEngineer - in- incharge. |
| 185 | Ground floor |
| 186 | Second floor |
| 187 | Providingandlayingdampproofcourse50mmthickinM20cementconcretelayerand bitumen / using cement with waterproofing compound curing, formwork etc. complete. |
| 188 | Ground floor |
| 189 | Second floor |
| 190 | Providingandapplyingwaterproofingtreatmentusingacrylicpolymermodifiedcement basedwaterproofingcoatingwithfibreglassmeshmixingattherateofpowdertoliquid (2:1)byweightcovering9to10SquareMetre/Kilogramwithtwocoatusingapproved chemicals for masonry andconcrete surface by brush covering 7 years guarantee on Stamp Papers etc. complete. |
| 191 | Ground floor |
| 192 | First floor |
| 193 | Second floor |
| 194 | Providing waterproofing in W.C. and bath including brick bat coba in all position including providingandlaying12mmbeddingincementmortor1:3onverginconcreteslabwith waterproofing compound @ 1Kilogram/per bag of cement laying brick bat coba ofrequired thickness in cm 1:5withwaterproofing compound1Kilogram/bag ofcement grouting and finishing the top layer with 20mm thick brick bedding in cm mortor 1:3 with waterproofing compound 1 Kilogram/per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years\" guarantee on requisite stamp paper including curing etc. complete. |
| 195 | Ground floor |
| 196 | First floor |
| 197 | Second floor |
| 198 | Providing and fixingOrissa Pan of size 580x445x260 mm with approved make flush valve including trap, C.I. soil andvent pipe upto outside face ofwall including 100mm dia.C.I. plug, bend and necessary pipe connection, etc complete. As directed by Engineer in charge. ( Jaquar / Hindware orEquivalent Make ) |
| 199 | Ground floor |
| 200 | First floor |
| 201 | Second floor |
| 202 | Providing andfixing white europeantype wall-hung pan, of size 350mm x355mm x570 mmconcealed flush tank with floor-mounting frame installing kit and drain pipe connection set for wall hung WC, with approved make square control plates including soil pipe, vent pipe uptotheoutsidefaceofwall,100mmdiaC.I.plugbendinletpipeallfittings,cutting&making good walls, floors etc. complete. ( Jaquar / Hindware orEquivalent Make ) |
| 203 | Ground floor |
| 204 | First floor |
| 205 | Second floor |
| 206 | Providing and fixing Anglo Indian type white glazed earthenware water closet pan with trap withUPVCseatandlidwithchromiumplatedbrasshingesandrubberbuffersincluding UPVC and vent pipe up to the outside face of wall with flushing cistern and necessary fittings includingcuttingandmakinggoodtothewallsandfloorstestingetc.complete ( Jaquar / Hindware orEquivalent Make ) |
| 207 | Ground floor |
| 208 | Providingandfixing wall-hungwhitewashbasinofsize470x575x190mmofapproved make half pedestal, pillar cock, C.P.Angular stop cock, long thread continental including S.S. bottletrapof havingnecessarypipeconnectionsuptotheoutsidefaceofthewall.etccomplete. ( Jaquar / Hindware orEquivalent Make ) |
| 209 | Ground floor |
| 210 | First floor |
| 211 | Second floor |
| 212 | Providing and fixingTable top white wash basin of size 120x635x405mm rubber plugs and brass chain, withpillar cock, C.P.Angular stop cock long thread, continentalincluding S.S. bottle trap of approved make havingnecessary pipe connection up to theoutside face of thewall.etc complete as directed by Engineer in charge. ( Jaquar / Hindware orEquivalent Make ) |
| 213 | Ground floor |
| 214 | First floor |
| 215 | Second floor |
| 216 | Providingandfixingwhiteglazedurinalofseries withPressmaticautoclosingvalveof having32mm diameter P.V.C. flush pipe withfitting andflushing of approvedmake and arrangement including lead soil pipe, lead trap & soil pipe connection upto the outside face of wall etc.complete as directed by Engineer in charge.( Jaquar / Hindware orEquivalent Make ) |
| 217 | Ground floor |
| 218 | First floor |
| 219 | Second floor |
| 220 | Providing and fixing White Glazed Earthenware Squatting plate (Ladies Urinal) with P.V.C. flushing cistern of 5 liters capacity with fitting, inlet pipes and stop tap, brackets for fixing the cistern, 32mm dia. P.V.C flush pipe withfittings andflushing arrangement including leadsoil pipe, lead trap, soil pipe connectionup to the outside face of the wall ( Jaquar / Hindware orEquivalent Make ) |
| 221 | Ground floor |
| 222 | First floor |
| 223 | Second floor |
| 224 | Providing and fixing C.P. BIB cock with wall flange of approvedmake including necessary sockets/ union nut etc. complete as directed by Engineer in charge. ( Jaquar / Hindware orEquivalent Make ) |
| 225 | Ground floor |
| 226 | First floor |
| 227 | Second floor |
| 228 | ProvidingandfixingC.P.2WayBIBcockwithwallflange ofapproved makeincluding necessary sockets/ union nut etc. complete as directed by Engineer in charge. ( Jaquar / Hindware orEquivalent Make ) |
| 229 | Ground floor |
| 230 | First floor |
| 231 | Second floor |
| 232 | Providing and fixingShower Head, withshower arm of approved make mixer ofincluding all necessary pipe fittings and connections etc. complete as directed by Engineer in charge. ( Jaquar / Hindware orEquivalent Make ) |
| 233 | Ground floor |
| 234 | First floor |
| 235 | Second floor |
| 236 | Providing and fixing 15 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete. |
| 237 | Ground floor |
| 238 | Providingandfixingstainlesssteelsinkofsize600x510x200mm incluidngcoupling, outlet pipe, elbow and other necessary fitting, finishing etc. complete.( Tata / Nirali or Equivalent Make ) |
| 239 | Ground floor |
| 240 | Providing and fixing 10 cm PVC nahani trap with grating etc. complete. |
| 241 | Ground floor |
| 242 | First floor |
| 243 | Second floor |
| 244 | Providingandfixingscrewdownfor25mmdia.wheeledstoptapofbrassincluding necessary sockets/union nut complete. |
| 245 | Ground floor |
| 246 | Providingandfixingscrewdownfor32mmdia.wheeledstoptapofbrassincluding necessary sockets/union nut complete. |
| 247 | Ground floor |
| 248 | Providingandfixingscrewdownfor40mmdia.wheeledstoptapofbrassincluding necessary sockets/union nut complete. |
| 249 | Ground floor |
| 250 | Providingandfixingscrewdownfor50mmdia.wheeledstoptapofbrassincluding necessary sockets/ union nut complete. |
| 251 | Ground floor |
| 252 | Providing and fixing 15cm x 10cm salt glazed stoneware gully trap in cement concrete 1:4:8 outside the building including cast iron grating in the sink, connecting glazed stoneware pipe, brick masonry chamber with cast iron lid and cast iron grating for the gully trap. |
| 253 | Ground floor |
| 254 | Providing , laying and fixing ,jointingEco- drain 160 mm SN 4 Nu- Drain Upvc pipes or of equivalent make, manufacture as per EN 13476 or equivalent as per I.S.15328 with fittings such abends,tees,coupler,etc,jointingwith rubberlubricantincludingnecessary excavation, trench refilling with selective excavated materialetc. complete. |
| 255 | Providing , laying and fixing ,jointingEco- drain 200 mm SN 4 Nu- Drain Upvc pipes or of equivalent make, manufacture as per EN 13476 or equivalent as per I.S.15328 with fittings suchabends,teestees,coupleretc,jointingwithrubberlubricantincludingnecessaryexcavation, trench refilling with selective excavated materialetc. complete. |
| 256 | Providing , laying and fixing ,jointingEco- drain 110 mm SN 8 Nu- Drain Upvc pipes or of equivalent make, manufacture as per EN 13476 or equivalent as per I.S.15328 with fittings such a bends, tees, coupler, etc, jointing with rubber lubricant including necessary excavation, trench refilling with selective excavated material etc. complete. |
| 257 | Providing , constructing and fixing 450 mm dia. Inspection chamber made up of Polypropylene / polyethylene material of thickness 3.5 mm and height of 388 mm with 160 or 200 mm main inlet (s) outlet and 110 and / or 160 mm branch inlets, with 450 mm dia. Ultra shaft pipe of HDPE material having height of 460 mm, having R.C.C. cover and frame fixing in 150 mm thick in c.c.1:2:4, having crushed sand bed of 150 mm thick of size 750 mm dia. Including excavation and refilling the sides of chamber by sand crushed cushioning 150 mm thickness, connecting all required UPVC fittings with rubber lubricant etc. complete. |
| 258 | Providing , constructing and fixing600 mm dia. Inspection chamber made up of Polypropylene/polyethylenematerialHaving315mmdiameterinlet(s)/outletsandwith eccentric reducers as per requirement to connect 160 mm and 200 mm pipes having thickness of5mmand600mminheight,withinbuiltshaftachievetheinvertdepthaspersite condition of wall thickness of 5 mm having R.C.C. cover and frame fixing in 150 mm thick in c.c.1:2:4, having crushed sand bed of 150 mm thick of size 750 mm dia. Including excavation and refilling the sides of chamber by ?sand crushed cushioning 150 mm thickness, connectingall required UPVC fittings with rubber lubricant etc.complete. |
| 259 | Providing andconstructing Brick Masonry Inspection Chamber 90cm x 45cm With R.C.C. raftinB.C.soilareaincludingcostofreinforcement,1:2:4cementconcretechannelshalf roundG.S.W.pipes,BrickMasonry,plastering from inside andairtightwith75mm thick R.C.C. cover medium duty 140Kilogrametc. complete. |
| 260 | RWH - Recharge PitProviding andconstructing rechargepitof2.0m deepand1.0m diaofpre-castRCCrings with6.5\"diax25mdeepborewellatthefloorofrechargepitincludinginstallationof combination of solid/perforated PVC casing pipe wrapped around with netlon mesh including 300mmthicksidefillingaroundoutsideofRCCrings(annularspace)with40mmsize bouldersincludingfillingofrechargepitupto0.5mdepthwith25-75mmcleanwashed gravels from bottom up followed by 0.5m depth of 10-25mm of clean washed stones followed by 0.5m of washed river fine aggregate (natural sand/crushed sand VSI grade finely washed etc.)includingnetlonmeshbetweeneachgravel/fineaggregate(naturalsand/crushedsand VSI grade finely washed etc.) media layer including covering with RCC slab, manhole frame & cover, PVC rungs, PVC end-caps, fittings etc. including arrangement for inlet & outlet pipe excavation& backfilling as shownin the drawing.The rate shall be inclusive of alllabour, material, wastage, scaffolding, transportation, taxes, including all leads, lifts at all levels. All materialshouldbeofapprovedmake.Allworkscompleteasperthedrawing,technical |
| 261 | Providingandfixing75mmdiastabiliserpipe/P.V.C.soilvent/wastepipeandwith necessary fixtures andfitting such as bends, tees, single junctions, slotted vent, clamps etc. complete |
| 262 | Ground floor |
| 263 | First floor |
| 264 | Second floor |
| 265 | Providingandfixing100mmdiastabiliserpipe/P.V.C.soilvent/wastepipeandwith necessary fixtures andfitting such as bends, tees, single junctions, slotted vent, clamps etc. complete. |
| 266 | Ground floor |
| 267 | First floor |
| 268 | Second floor |
| 269 | Providingandlayingintrenches15mmdai.CPVCpipeincludingnecessaryexcavation, fittings.Refillingtrenchesetc.completeIncluding removingexisting pipeline ifnecessary and conveying and stacking the same in PWD chowky or as directed etc. complete. |
| 270 | Ground floor |
| 271 | First floor |
| 272 | Second floor |
| 273 | Providing andfixing onwalls/ceiling/floor 20mm dia.CPVC pipe withnecessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. |
| 274 | Ground floor |
| 275 | First floor |
| 276 | Second floor |
| 277 | Providing and fixing on walls/ ceiling/ floor 25 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. |
| 278 | Ground floor |
| 279 | First floor |
| 280 | Second floor |
| 281 | Providing and fixing on walls/ ceiling/ floor 32 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. |
| 282 | Ground floor |
| 283 | First floor |
| 284 | Second floor |
| 285 | Providing and fixing on walls /ceiling/ floor 40 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. |
| 286 | Ground floor |
| 287 | First floor |
| 288 | Second floor |
| 289 | ProvidingandfixingP.V.C.Rainwaterpipesof110mmouterdiameterandhavingwall thicknessof2.2to2.7mmconfirmingtoI.S.13592-1992includingproperrainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and number ,filing the joint using rubber gasket withsolventcementandproperlyrestingtheshoeofpipesonC.C.ormasonryblocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete. |
| 290 | Ground floor |
| 291 | First floor |
| 292 | Second floor |
| 293 | Providing and laying in walls/ceilings/floors 15 mm dia. medium grade having embossed as ISI Mark galvanised iron pipes of 1.25 Kilogram/metre necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint, 2 coats complete. Including necessary scaffolding andremoving existing pipe line if necessaryand conveying and stacking the same in PWD chowky or as directed etc. complete. |
| 294 | Providing and laying in walls/ceilings/floors 25 mm dia. medium grade having embossed as ISI Mark galvanised iron pipes of 2.49 Kilogram/metre necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint , 2 coats complete. Including necessary scaffolding andremoving existing pipe line if necessaryand conveying and stacking the same in PWD chowky or as directed etc. complete. |
| 295 | Ground floor |
| 296 | First floor |
| 297 | Second floor |
| 298 | Providing and laying in walls/ceilings/floors 32 mm dia. medium grade having embossed as ISI Mark galvanised iron pipes of 3.20 Kilogram/metre necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint , 2 coats complete. Including necessary scaffolding andremoving existing pipe line if necessaryand conveying and stacking the same in PWD chowky or as directed etc. complete. |
| 299 | Ground floor |
| 300 | First floor |
| 301 | Second floor |
| 302 | Providing and laying in walls/ceilings/floors 50 mm dia. medium grade having embossed as ISI Mark galvanised iron pipes of 5.17 Kilogram/metre necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint , 2 coats complete. Including necessary scaffolding andremoving existing pipe line if necessaryand conveying and stacking the same in PWD chowky or as directed etc. complete. |
| 303 | Ground floor |
| 304 | First floor |
| 305 | Second floor |
| 306 | Providing and fixing on walls/ ceiling/ floor 50 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. |
| 307 | Ground floor |
| 308 | First floor |
| 309 | Second floor |
| 310 | Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out oflowdensitypolythylerandbuiltcorrugationincludingofdeliveryuptodestination hoisting andfixing of accessories such as inlet, outlet overflow of alltanks capacityabove1000 to 20,000 litres |
| 311 | Ground floor |
| 312 | Second floor |
| 313 | Providing,layingandfixingP.V.C.pipeof75mmdia.withfittingssuchasbends,tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removingexistingpipelineifnecessaryandconveyingandstackingthesameinPWDchowky or as directed etc. complete. |
| 314 | ProvidingandinstallingbiodigesterunitbasedonDRDOtechnologymadeoffibre reinforcedplastic(FRP)havingcompositionandfollowingtechnicalspecificationsand includingnecessarypipeandaccessoriesupto3meterlength,excludingthenecessary excavation for installing the bio digester.Percentage of fibre glass (glass content in fibre glass should be minimum 30%): -33.33% Percentage of polyester resin: - 66.67%Water absorption (as per ASTM):-0.30% Flammability as per ASTMTensile strength:-115 MPASpecific Gravity at 25 degree centigrade 1.45 Izod impact strength:-65KJ/M2Heat defection/distort temperature:-65deg C Corrosion resistance (Non Corrosive) fitted with Inlet pipe size rigid PVC: -100mmOutlet pipe size rigid PVC:-80mmGas outlet rigid PVC with Valve: 20mmBacteria immobilization PVC mattes (on all partition)With DRDO TOT licensee and latest batch certificate(month & year of supply) and capacity as below |
| 315 | Providing and fixing during laying in RCC Slabrectangular 2 mm thickM.S. sheet fan hook box ofsize 180x100 mm with required depth with holes or notches as required, bottom and top sides of 1.6 mm M.S. sheet fixed with 3.5 mm dia. round headed screws together with 12 mm dia. M.S. bar bent to shape with hooked ends for fan hook and painting to exposed surface |
| 316 | Providing and Fixing mat finish stainless steel (of 302 grade ) railing with toppipe of 50 mm dia. and vertical pipe of 38 mm dia at 0.60 m c/c or as required and horizontal pipes of 25 mm dia in three rows, all pipes of 2 mm thick including buffing,fabricating fixtures and fastening including pipe base of appropriate diameter and ball base of 75 mm dia above newel post of75mmdiameteretc.complete(PriorapprovalofsampleandbrandbyEx.Engineeris necessary before use) |
| 317 | Ground floor |
| 318 | First floor |
| 319 | Second floor |
| 320 | Providing andfixing 450mm x550mm size superiortype Belgium mirrorwith16mmdia. nickel plated towel rod etc. complete. |
| 321 | Ground floor |
| 322 | First floor |
| 323 | Second floor |
| 324 | Providing and fixing heavy duty inter locking concrete Rubber mould glossy paving blocks of 80 mm thickness of having a strength of 400 Kilogram/Sq.cm. of approved quality and shape on a bedof crushedsand of 25 to 30 mm thick including skirting jointsandcleaning etc.complete. (using 100% crushed sand) |
| 325 | Providing and laying chequered tiles of approved qualityof size 30 cm x 30 cm, confirming tocorrespondingI.S.forflooringinrequiredpositionlaidonabedof1:4cementmortar including cement float, filling joint with cement slurry cleaning curing etc. complete. |
| 326 | Providing and laying Rough Shahabad Stone Flooring 25mm to 30mm thick and of required width in plain/ diamond pattern on a bed of 1:6 C.M. including cement float, striking joints, pointing in cement mortar 1:3 curing and cleaningetc. complete. |
| 327 | Providingandfixing90cmx60cm Graniteplateengraving10cm.heightletter,figures including painting the lefters/figures with approved colour and shade complete |
| 328 | Providing and fixing Cautionary/Warning sign boards in Equilateral Triangle size of 750 mm made out of 2.00 mm aluminum sheet bonded with white retro reflective sheeting ofClass B ( TypeIVHighintensitymicro-prismaticgradesheeting-HIP)havingpressuresensitive/heat activatedadhesiveretoreflectivespecifiedbackground,borderandbacksideretoreflctive symbols,letters,numerals,arrowasperIRC:67-2012TableNo8.3Supportedwithback support frame 25mm x 25mm x 3mm, duly painted on back side with grey stove enamel paint and supported on one Number ofM. S. angle iron post of size65 mm X 65 mm X 6 mm, 3.45 m long,duly paintedwithwith flat oil paint having alternate black and white bands of 25 cm width including G.I. fixtures etc; fixing the boards in M25 grade concrete block of size 60cmX60cmX75cmincludingtransportationetc;complete.ClassB(TypeIVHigh intensity micro-prismatic grade sheeting-HIP) shall have 7 years written warrantyfrom the manufacturer and authorised distributor/convertor issued for field performance including the screen printed areas and cut-out sheeting and cut-out durable transparent overlay film and this warrantycertificate inoriginalshouldbesubmittedtotheEngineerinchargebythe |
| 329 | Providingandfixingofretro-reflectorisedinformatorysignboardrectangular/Squarein shape having area less than 0.9 square meter made out of4.00 mm aluminum sheet bonded withwhiteretroreflectivesheetingof Class B (TypeIVHighintensitymicro-prismatic grade sheeting-HIP) having pressure sensitive/heat activated adhesive retoreflective specified background,borderandbacksideretoreflctivesymbols,letters,numerals,arrowasper IRC:67-2012 Table No 8.3,supportedwith back support frame 25mm x 25mm x 3mm, duly painted on back side with two coats of grey stove enamel paint and supported on one Number mild steel angle iron post 75 mm x 75 mm x 6 mm, 3.5 mt long firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below groundlevel as per approveddrawing The angle iron postshall be duly painted with one coat of epoxy primer and two coats of epoxy finish paints having alternate black and white bands of 25 cm width including GI fixures and transportation etc.complete.The nut bolts of board withangle ironpost/supporting structure after fixing atsitehastobeelectricallywelded.ClassB(TypeIVHighintensitymicro-prismaticgrade |
| 330 | Providingandfixingboarddisplayinginformation,suchas\"Nameofwork,Tendercost, Name of Contractor, Work completion and liability period etc\", having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x75cmincluding,excavation,refilling,transportation,andlabouretccomplete.Spec. Number As directed by Engineer in Charge |
| 331 | Supply, fixing and installation of 4mm thick Aluminium Composite Panel (ACP) of approved colourforexternalcladdingincombinationofsolidandmetalliccolours,includingall necessary Framework, support and complete weather sealing as per architectural drawing. The Aluminium Composite Panel (ACP) should be made out of thermoplastic core of low-density polyethyleneLDPE(100%virginmix),sandwichedbetweentwoaluminiumsheetsof ALLOYGRADE-5000series,eachnotlessthan0.50mmthick,totalthicknessof aluminium composite panels not to be less than 4 mm, the exposed surface thereof shall have Stovelacqueredfinishingcoatnotlessthan(26+-2)micron(containingminimum70% kynar 500 based PVDF) of colour and shade as per architectural design. The inside surface (facing the building exterior surface)shall have polyster based powder coating not less than 25 Micron with protective peel-off foil on the exterior face (peel off film will in no case leave anyadhesivemark overthe compositepanelsurfaceafteritispeeledoff).Thesupporting frameworkshallbemadeoutof50mmX25mmX3mmthickAluminiumsectiontobe spaced horizontally and vertically for fixing of panel of size 900 mm X 1200 mm and fixed to the building structure as per design through 50mm X50mm X5 mm MS angle clamps prefixed to masonry or slab, columns with Hilti make anchor fastener screws. The fixing of panel to be done withthe helpofVHBtapesandscrewsandallthe sealing ofjointsto be done with weathersealentSiliconasdirectedbyEngineer-in-charge.(PriorpermissionofS.E.is necessary before inclusion of this item in estimate) |
| 332 | Providing and Fixing toilet set for differently Abled persons consist of Floor Mounted white vitreouschinawaterClosetincluding 6litre capacitywhite vitreouschina flushing Cistern with raised soft-push button, white vitreous china wash basin of size 46 x 36 cm and one no SS 304 hinged rail 76 cms & three no SS 304of (Grab Bar) 60 cms all including cutting and makinggoodthewallsandfloorswhereverrequired,seatcover,cistern&washbasin fittings,nuts, bolts and gasket etc complete as per the direction of Engineer-In-charge. |
| 333 | Acrylic tactile audio mapDesign, supply, fabrication and fixing of acrylic, non glare, tactile audio pictorialbuilding layout as per the approved size, design and make, having 6mm thick acrylic non glare base plate of the approved colour and non glare acrylic cut out symbols and upper case Sans Serif lettersof12mmheight,raised3mmabovebaseplateandGrade2/Grade1Brailletobe integral with the sign face and be raised 0.5mm above base plate. The map to be installed at the specified location as per accessibility standards,shall be oriented to the position of the viewer andto be installed at a height of 800 mm from the finished ground/ floor level and usingthenecessaryhardwarespecifiedbythemanufacturerandtobeinstalleduptothe satisfaction of the engineer in charge |
| 334 | Directional signageDesign,supply,fabricationandfixingacrylicmultilingualBraille(raiseddots)directional signboardsofsize6\"x9\" designedasperaccessibilitystandardsandhaving4mmthick acrylic base plate with Upper Case San Serif words made of white acrylic non glare cut out letters of height 15mm raised not less than 0.8mm above base plate and the equivalent word written in Hindi with Devnagri non glare acrylic letters of height 15mm raised not less than 0.8mm above base plate andhaving anonglareacryliccutarrowpointingintherequired direction. Each signboard to be fixed as per manufacturers specifications on the wall at the approvedlocationandataheightof1200mmfromFFLandasperthedirectionsbythe engineer in charge. |
| 335 | Floor Directories Providing and fixing acrylic multilingual Braille (raised dots)ADA compliant modularfloor directories system on all floors of size1.5\" x 2\" , showing the floor planandthelistofroomsonthatfloor,tobeinstalledoneachfloornearthestaircase, designed as per standards and having 4mm thick blue acrylic base plate with Upper Case San Serif words and symbols made of white acrylic non glare cut out letters of height 20mm raised notlessthan0.8mmabovebaseplateandtheequivalentword/swritteninHindiwith Devnagri non glare imported acrylic letters of height 15mm raised not less than 0.8mm above base plate. Grade 2/ Grade 1 Braille to be integral withthe sign face andbe raised0.5mm above base plate.Each directory to be fixed as per manufacturers specifications on the wall at theapprovedlocationataheightof1200mmfromFFLandasperthedirectionsbytheengineer in charge. |
| 336 | Fire exit and floor identification signage as per manufacturer\"s specifications, ADA compliant and modular system |
| 337 | Supply and Installation of Dpi Flux translucent roof with standing seam multicell polycarbonate panel system. The system with complete assembly of co extruded UV protected multicell panels incorporated into a complete system. Co-extruded UV protected polycarbonatepanelsystemofmin16mmthickof1200mm(min.)widthwithangular daylightingconcept.Panelsshallhaveminimumsevenlayersinatrussbridgedesignfor higherflexibility&strength.Panelswithopaqueandtranslucentclearcombinationasper requiredluxlevelanddesignrequirementswithallfixingaccessoriestoensurebest performance for wind uplift, vibration, oil canning and visual appearance. Panels shall have an additional IR Blocking features for enhance thermal comfort. Panels shall be manufactured withvertical standing seam at bothsides of the panel. Panels shall be fixed on Purlinwith snap on connectors withdouble tooth grip lock locking mechanism andwill be securedon MS structure (will be paidSeparately) with3 numbersself-drilling screws& trapezoidSSfasteners holding the base of the standing seam offering best stability having a pull-out load of |
| 338 | Ground floor |
| 339 | Third floor |
| 340 | Design,supply,fabricationandfixingofSS,nonglaremultilingualBraille(raiseddots) entrance signage (size 1 ft x 1 ft) as per the approved design and make,indicating the name of the building. Having 1.2mm thick SS non glare blue coloured base plate with the \"Universal Accessibility Symbol\" and Upper case Sans Serif words of height 15mm engraved on it along with the equivalent word/ s written in Hindi using Devnagri script of height 15mm in white colour.Grade2/Grade1Brailletobeetched/engravedandberaised0.5mm abovebase plate.The signage to be installed at the specified location on the compound wall near the site entrance gate installed at a height of 1200 mm from the finished ground/ floor level, using the necessary hardware specified by the manufacturer and to be installed up to the satisfaction ofthe engineer in charge. |
| 341 | Design, supply, fabrication and fixing acrylic multilingual Braille (raised dots) signboards of size 6\"x 9\" for room titles, designed as per the drawings issued and having 4mm thick blue acrylic base plate with Upper Case San Serif words made of white acrylic non glare cut out letters of height 15mm raised not less than 0.8mm above base plate and the equivalent word/s written in Hindi with Devnagri non glare acrylic letters of height 15mm raised not less than 0.8mm above base plate. Grade 2/ Grade 1 Braille to be integral withthe signface andbe raised 0.5mm above base plate.Each signboard to be fixed as per manufacturers specifications on the wall adjoining the respective room door at a height of 1200mm from FFL and as perthe directions by the engineer in charge. |
| 342 | Providing and fixing 6 mm thick toughened glass pannleing with ST series green reflective coolglass on a frame of alluminium section of size 70 mm x 53 mm for green bldg concept & additional frame work for fixiing alluminium frame etc complete as Directed by Engineer in charge |
| 343 | Providing and laying in situ /Ready Mixcement concreteM-20of trap / granite /quartzite/ gneiss metalforR.C.C.work infoundationslikeraft,stripfoundations,grillageand footingsofR.C.C.columnsandsteelstanchions etc.includingbailingoutwater, Steel centeringformwork,laying/pumpingcoverblocks,compactionandcuring roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate(Crushed sand VSI Grade) |
| 344 | ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-20oftrap/granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 345 | ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-20oftrap/granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or asdirectedincludingsteelcentering,formwork,coverblocks,laying/pumping, compactionandrougheningthesurfaceifspecialfinishistobeprovidedandcuringetc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 346 | ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-20oftrap/granite/ quartzite/ gneiss metal for R.C.C.slabs andlandingsasper detaileddesigns anddrawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 347 | Providing and laying Cast in situ/Ready Mixcement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting androughening the surface ifspecial finish is to be provided and curing complete. (Excluding reinforcement and structural steel). withfullyautomaticmicroprocessorbasedPLCwithSCADA enabledreversibleDrum Typemixer/concreteBatchmixplant(Panmixer)etc.complete.Withfineaggregate (Crushed sand VSI Grade) |
| 348 | Excavationforroadwayinearth,soilofallsorts,sand,gravelorsoftmurumincluding dressing section to the required grade, camber and side slopes and conveying the excavated materialswithallliftsuptoaleadof50m.andspreadingforembankmentorstackingas directed. |
| 349 | Providing earthworkinembankmentwithapprovedmaterialsobtainedfrom othersources upto leadof 50m. including all lifts, laying in layers of 20cm. to 30cm. thickness breaking clods, dressing to the required lines, curves, grades & section, watering and compaction with vibratoryrollerwithV-Satattachmenttoachievenotlessthan97%ofstandardproctor density etc. complete( Material obtained from Other sources) |
| 350 | Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader/ Paver on prepared surface and compacting with vibratory roller to achieve the desired density, complete as per clause 401 -- Plant Mix Method and Grading - I Material |
| 351 | Wet Mix Macadam -- Providing, laying, spreading and compacting graded stone aggregate to wetmixmacadamspecificationincludingpremixingtheMaterialwithwateratOMCin mechanical mix plant carriage of mixedMaterial by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. Laying By Grader/Paver. |
| 352 | DENSEBITUMINOUSMACADAM:--Providingandlayingdensebituminousmacadam using crushed aggregate of grading 1, premixed with bituminous binder Bitumen of specified grade,@ 4.50 % by weight of total mix and filler, transported at site with VTS, laid over a previouslypreparedsurface ,finishedto the requiredgrade ,level,alignment,androllingto achieve the desired density for 76/100 mm compacted thickness with drum mix type hot mix plant with SCADA having complying essential features of Hot mix plant as per IRC-27-2009 specifiedconditionsandattachmentssuchaselectronicloadsensorbasedbeltconveyers, automatic synchronization of bitumen and aggregate fedder,built in dust controller system and PLC for Drum Mix plant ,Sensor paver, and Vibratory roller excluding prime/Tack coat etc. complete--BitumenVG-30gradewithstonedustfiller(VG-30bulkbitumenratesareconsidered to arrive at rates) |
| 353 | BITUMINOUSCONCRETE:--Providingandlayingbituminousconcreteusingcrushed aggregate of grading 1,premixed with bituminous binder @5.40% by weight of total mix and filler, transportedat site withVTS,laid overa previouslypreparedsurface,finishedtothe requiredgrade,level,alignment,androllingtoachievethedesireddensityfor50mm compacted thickness with drum mix plant with SCADA, Sensor paver and Vibratory roller excluding prime/Tack coat etc. complete --Bitumen of specified grade with stone dust filler. (VG-30 bulk bitumen rates are considered to arrive at rates) |
| 354 | ProvidingandapplyingtackcoatonthepreparedsurfaceheatingbyfamesinBoilerand spraying bitumen withsprayer on Dry / Hungry B.T. surface 3 Kilogram/10 Square Metre. (VG-30 bulk bitumen rates are considered to arrive at rates) |
| 355 | Providing and fixing reinforced cement concrete cover of size 90 cm x 45 cm with frame over inspection chamber etc. complete. Heavy duty (225 Kilogram) |
| 356 | SupplyingandFixingofMoldedShankRaisedPavementMarkers/Cat\"sEye madeof polycarbonateandABSmouldedbodyandreflectivepanelswithmicroprismaticlens capableofprovidingtotalinternalreflectionofthelightenteringthelensfaceandshall supportaloadof16000KilogramtestedinaccordancetoASTMD4280TypeHand complying to Specifications of Category A of MORTHCircular No RW/NH/33023/10-97 DO III Dt 11.06. 1997. The height, width and length shall not exceed 50 mm, 100 mm and 102 +/- 2 mm and with minimum reflective area of 13 Sqcm on each side and the slope to the base shall be 35 +/- 5 degree. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 +/- 2 mm and height not less than 30+/- 2 mm) from the body is to be a minimum value of 500 Kilogram. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer\"s recommendation and complete as directed by the engineer.The contractor shall submit a two year warrantyfor satisfactory field performance including stipulated retro-reflectance of thereflecting panel, to the Engineer. |
| 357 | Road Marking with Hot Applied Thermoplastic Compound with Reflectorizing Glass Beads on Bituminous Surface- Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorizing glass beads @ 250 gms per Square Metre area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.complete. |
| 358 | Excavation for catch / side water gutter in all sorts of soils to the specified section including stacking the excavated stuff in a regular bund and disposing of unsuitable or excess stuff as directed all sorts of soils. |
| 359 | Excavationfor catch/ side water gutterin Hardmurum andboulder stratato the specified section including stacking the excavated stuff in a regular bund and disposing of unsuitable or excess stuff as directed. |
| 360 | ProvidingandlayingCastinsitu/ReadyMixcementconcreteinM-10oftrap/granite/ quartzite/gneissmetalforfoundationandbeddingincludingbailingoutwater,Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided,finishingifrequiredandcuringcomplete,withfullyautomaticmicroprocessor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete.With fine aggregate (Crushed sand VSI Grade) |
| 361 | Providing and laying concrete pipes of I.S.NP. class of 300mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete. |
| 362 | Providing and laying concrete pipes of I.S.NP. class of 150mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar1:1 and refilling the trench complete. |
| 363 | Providing and casting in situ or precast tapering R.C.C. M-20 Barrier type Kerb with gutter ( as per IRC 86 1983) embedded 125mm below ground level over M-10 PCC finished neatly with C.M. 1:2, setting the same in C.M. 1:2, including the required excavation in any strata and removing the excavated stuff any where in city and redoing the surface as specified and directed by Engineering In-charge. Using Concrete Batching and Mixing Plant |
| 364 | Providing selected hard murum filling including laying in layers of 15 to 20cmwith watering and compacting etc. complete. |
| 365 | Providing and laying cement concrete pipe of IS 458:2003 NP-3 class of 1000mm diameter in proper line, level and slope etc. complete. |
| 366 | Providing expansion joints with 25mm thick bituminous pad as per detailed drawings etc. complete. |
| 367 | Providing and fixing 50 mm. dia. medium class G.I.pipe gate with wicket gate of approved drawing with all fixtures and fittings in two leaves with strong hold fast embedded in c.c. block at top and bottom with locking arrangement including cutting, bending, making holes and with one coat of primer etc. complete. |
| 368 | Providing patti/ band 100mm wide on plastered surface 12 mm to 15 mm thick in C.M. 1:3 line and level including neat finishing scaffolding curing etc. complete. |
| 369 | Providing and fixing 20 to 25 mm thick rough shahabad box type waterproofing for basement or underground floor on a base of Cement concrete 1:3:6, including sub base of 2.50 centimeter thick Cement mortar 1:3 with conceal, secrete (RMW), Algae proof or other alike waterproofing liquids, raking of joints upto 35 mm depth, filling the joints with 6 mm size crushed metal, hand grouting with cement slurry, curing and cleaning, with 7 years guarantee on court fee stamp of Rs. 100/- with ponding test etc complete. (excluding Cement concrete 1:3:6 base concrete ) |
| 370 | Providing and applying a base coat comprising of 1 Kg Polydee-MC and 1 Kg fresh cement after wetting the surface followed by drying the surface for 2 days, apply primer coat of TP-40 and after drying, applying Polydee-11 two component (mixing ratio 2 A : 1 B) ) Antibacterial food grade coating inside drinking water tank in two coats with time interval of minimum 8 hrs. covering 7 years guarantee on Court Fee Stamp Paper of Rs. 100/- etc. complete. |
| 371 | Supplying, filling, spreading & leveling stone boulders of size range 5cm to 20cm in recharge pit, in the required thickness, for all leads & lifts, all complete as per the direction of Engineer-in-charge. |
| 372 | Supplying, filling, spreading & leveling gravels of size range 5mm to 10mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-incharge. |
| 373 | Supplying, filling, spreading & leveling coarse fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) of size range 1.5mm to 2mm in recharge pit, in required thicknessover gravel layer, for all leads & lifts, all complete as per direction of Engineer in charge. |
| 374 | Providing and fixing in position C.I. ultra violet stabilized 150 mmdiameter cowl dome confirming to I.S.-4985 including making joints with solvent cement etc. complete |
| 375 | Providing and fixing in position UPVC ultra violet stabilized 110 mm outer diameter cowl dome confirming to I.S.-4985 including making joints with solvent cement etc. complete |
| 376 | Item No. 1 :Drilling of 150 mm dia Borewell with all charges etc complete |
| 377 | Item No. 2Providing and fixing 180 mm dia U.P.V.C. casing pipe as per IS 12818-1992 outer dia should be 165.4 mm etec complete |
| 378 | Item No. 3Providing and fixing 180 mm dia U.P.V.C. cap etc complete |
AI Tender Summary
Tender Timeline
Jul 30, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedAug 23, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 24, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender