Renovation Interior Work In Corridor -B At Vidhan Bhawan, Lucknow.
Tender Value
95.66 Lakhs
Estimated cost
Bid Submission
11 Aug 2022
0 days left
EMD
95700
Bank guarantee accepted
Document Fee
2360
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kanpur → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Renovation Interior Work In Corridor -B At Vidhan Bhawan, Lucknow.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 08-Aug-2022 | DATEEXTAND | Date | 10-Aug-2022 |
| 2 | 10-Aug-2022 | TERM1 | Other | 11-Aug-2022 |
| 3 | 10-Aug-2022 | DATEEXTAND11 | Date | 11-Aug-2022 |
BOQ
| Sl. No. | Item Description |
| 1 | Part A : (Civil Work) |
| 2 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. 15.23.2 For thickness of tiles above 25 mm and up to 40 mm 15.23.2 For thickness of tiles above 25 mm and up to 40 mm |
| 3 | Dismantling of stone works in dado including moulding, stacking of materials as directed by the Architect-in-charge with in a distance of 60 meters (200ft.) |
| 4 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge |
| 5 | Dismantling of existing Wall Panellingincluding stacking of material as directed by Architect in charge with in a distance of 50 meter. |
| 6 | Disposal of Malba. |
| 7 | Scraping old white or colour wash including disposal of refuse material as directed by Architect - in -charge with a distance of 60 meter. (200 feet).(Inner surface) |
| 8 | 15 mm cement plaster on rough side of single or half brick wall of mix: 13.5.1 1:4 (1 cement: 4 coarse sand) |
| 9 | Extra for plastering done on moulding, cornices or architraves including neat finish to line and level 13.24.1 In one coat |
| 10 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 11 | Providing and fixing machine cut, mirror/ eggshell polished , Marble stone work for wall lining (veneer work) including dado, skirting, risers of steps etc., in required design and pattern wherever required, stones of different finished surface texture, on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) laid and jointed with white cement slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing, polishing etc. all complete as per Architectural drawings, and as directed by the Architect-in-Charge |
| 12 | Providng ornamentation work on Columns Capital and Base of 200mm Thk. Italian Marble Block with CNC and Carving |
| 13 | Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Architect-in-Charge. |
| 14 | Providing and Finishing wall with Rough textured Stucco paint (asian or equivalent) |
| 15 | Providing and laying machine cut, mirror polished Marble stone flooring, in required design as per drawing approved and in patterns in combination with Italian marble stones of different colours, shades and finished surface textureincluding cutting, etching, engaving by any suitable medium required, in linear portions of the building, all complete as per the architectural drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm, including pointing with white cement slurry admixed with pigment to match the marble shade, including rubbing, curing and polishing etc. all complete as specified and as directed by the Architect-in-charge (18 mm thick Italian Marble stone slab,gold portoro, nero oro ertoro, silver portoro,etc.) |
| 16 | Providing and fixing machine cut, mirror/ eggshell polished , Marble stone work for wall lining (veneer work) including dado, skirting, risers of steps etc., in required design and pattern wherever required, stones of different finished surface texture, on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) laid and jointed with white cement. slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing, polishing etc. all complete as per Architectural drawings, and as directed by the Engineer-in-Charge. |
| 17 | Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete. |
| 18 | Scraping old Polish including disposal of refuse material as directed by Architect - in -charge (Inner surface) |
| 19 | Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below:1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos.2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs. |
| 20 | 3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill allthe small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs. |
| 21 | 4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polishand melamine thinner mixed in required proportion complete as per direction of Architect-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.) |
| 22 | Providing & fixing ofDesigner false ceiling. |
| 23 | Providing , supplying and fixing of ornamental GRC Cornice with all the engraving, ornamentation and extrusions as per drwing from Arhcitectin Charge |
| 24 | Providing 10 mm thick plaster of Paris (gypsum anhydrous) ceiling up to a height of 5 m above floor level, over first class kail wood strips 25x6 mm with 10 mm gap in between and reinforced with rabbit wire mesh fixed to wooden frame (frame work to be paid separately): Flat surfaces.Extra for sunk or raised mouldings in the plaster of Paris (Gypsum anhydrous) ceiling. |
| 25 | Aluminum Painting on Windows |
| 26 | Panellings |
| 27 | MS Mesh in False Ceiling Steel work in built up tubular (round, square or rectangular hollow tubesetc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc.complete. |
| 28 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer\"s specifications including appropriate priming coat, preparation of surface, etc. complete. |
| 29 | MS False ceiling , Providing, fixing of armstrong Metal False ceiling F-H 600 System Armstrong ceiling system F-H 600, Hook-On solution with concealed grid, installation height min. 170 mm for wall bracket at perimeter with 5 - 65 mm shadow gap between wall and panel F-H 600 Swing Function easy swing Armstrong ceiling system F-H 600 Swingdown, Hook-On solution with visible grid, installation height min. 155 mm for wall bracket at perimeter with 0 - 72 mm shadow gap between wall and profile with integrated swing-down function as per drwaing and Architect in charge |
| 30 | Scaffolding Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm diaM.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineerin- charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding. |
| 31 | Providing and fixing Scaffolding net of required width made of high density Polyethylene UV stabilized knitted on warp knitting machines having density 100grams/sqm and shading coefficient minimum 75% around the construction site/ for vertical extension as per requirement including fastening/tying with building/scaffolding pipes or with any other fixtures etc. complete as per direction of Engineer-in-Charge. (One time payment shall be made for providing Scaffolding net from start of work till completion of work including shifting if any. The Scaffolding net shall be the property of the contractor on completionof the work) |
| 32 | PVC RIGID FLOOR PROTECTION |
| 33 | Expanded poly ethylene Foam sheet 4mm thick of Density 40kg/m3 |
| 34 | Head Load for carriage till 2nd Floor |
| 35 | Part B : (Electrification Work) |
| 36 | Providing and Installation of LED Strip especially designed for commercial use Available in 3000K & 6500K (Philips/Siemens/Ligman or Equivalent) with Aluminium Casin |
| 37 | Providing and Installation of Decorative Heritage Wall Lamp(Philips/Siemens/Ligman or Equivalent) |
| 38 | Providing and Installation ofGround Burial Light (Siemens/Ligman or Equivalent) |
| 39 | Supply and Installation of magnificent chandelier to add transitional style elegant Sparie Chandelier of Glass and Metal (Philips/Siemens/Ligman or Equivalent) |
| 40 | Supply and Installation of Philips or equivalent Pureline Slim Recessed 60/75mm RC780B leD52S-6500 PSU W7L240 OD SI (Philips/Siemens/Ligman or Equivalent) |
| 41 | Supply and Installation of Philips Style Sate Tack mounted accente lightign in whtie body ST916T LED 20/940 PSU 1CMBBKIN |
| 42 | Part C : (Furnitures) |
| 43 | Visitor Chair |
| 44 | Wall Painting, Supplying and providing wall paintings with antique model metal frame brass polished of size not less than 1200X1200 or as specified in design as per Architect incharge |
| 45 | Signages, Supplying and fixing of signages in Metal- MS or Aluminum/Acrylic on Aluminum sheet of 4mm thickness inlcuding the cost of all engravings, through cut to gain the illustrations or text as per design, including the cost of CNC, etching, backitting, frontlitting as per Architect in charge |
AI Tender Summary
Tender Timeline
Aug 10, 2022
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 10, 2022
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Aug 11, 2022
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Completed
Aug 11, 2022
18:00 IST
Corrigendum-3 Issued
Clarifications on tender conditions and amendments issued.
CompletedAug 11, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 08, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender