|
| 1 | Earth work in all kinds of soilwithin 50m. initial lead & 1.5m. initial lift including rough dressing & breaking clods to maximum 5cm. to 7cm. & laying in layers not exceeding 0.3m. in depth & as per direction of the engineer –in –charge |
| 2 | Cutting cement concrete road for taking the watersupply line through and making good to the damages (Mannually) (Labour only) |
| 3 | Cutting cement Bituminous road for taking the watersupply pipe line through and making good to the damages (Labour only) |
| 4 | Supplying of all labour & T&P materials for laying in trenches DI K7 pipes confirming to I.S. 8329:2000 of following nominal diameter as per specification complete.250mm Dia. K7 Pipes |
| 5 | 100mm Dia. K7 Pipes |
| 6 | Making tyton joints using SBR tyton rubber rings (ISI marked)to spun ironDuctile iron pipes & fitting of the following nominal dia. including testing of the joints but excluding the cost of rubber rings as per specification complete. 250mm Dia. K7 Pipes |
| 7 | 100mm Dia. K7 Pipes |
| 8 | Fillingin foundation and plinth with sand wateredand rammed including cost of all labour ,transportation , T&P etc all complete. |
| 9 | Carriage of surplus earth & concrete by mechanical means with in 5Km Lead |
| 10 | Filling foundation and plinth with excavated Earth inluding watering and ramming |
| 11 | Cement concrete (1:4:8) with 4cm. Size crusher broken hard Granite metal including cost of all labour, materials with all taxes, lead,T & P etc all complete . |
| 12 | Cement concrete (1:2:4) with 12mm Size crusher broken hard Granite chips including cost of all labour, materials with all taxes, lead,T & P etc all complete . |
| 13 | Supplying all labour, T&P materials etc for reconnection of service connection with 15mm dia PVC Sch-80 conforming to ASTMD-1785 Pipe of length3mtr.to the newly laid pipe line after disconnection from the old outlived pipe line including cost of dismantling , mending with cement concrete, drilling holes, pipes, Ferrule, DI saddle and other fittings as per site condition etc all complete as per direction of Engineer-in-charge. |
| 14 | Supplying all labour, T&P materials etc. for interconnection including cutting and mending concrete work of2.50m. X 1.50m. Area (average) with earth excavation, sand filling, dewatering with 5 HP Diesel engine and necessary M.S. work with cutting and welding etc all complete as per direction of Engineer-in-charge. (laying of specials, Earthwork in trenches for specials, jointing of pipes, cost of specials and fittings to be measured separately). |
| 15 | Providing & Fixing of swing type Non-return valves Rating PN-1.6 with double flanged ends conforming to IS : 5312 (Part-I) for water works purposes for the following rating and nominal diameters as per specificationcomplete. 150mmdia Non-return Valve |
| 16 | Providing & Fixing ofcast iron Non Rising Spindle type Sluice Valve without wheel Rating PN-1.6 (IS:14846) with double flanged ends for water works purpose for the following rating & nominal dia. includingcost of nuts & bolts, rubber insertation inculding cost of sluice valveas per specification complete. 250mmdia C.I. S.V |
| 17 | 200mmdia C.I. S.V |
| 18 | 150mmdia C.I. S.V |
| 19 | Fixing 50mm dia. Double Air Relief Valve conforming to IS 14845 : 2000 for water works purposes for the following diameters including drilling the water main (Cast Iron pipes with metal straps) as per specificationcomplete |
| 20 | Supplying all labour, T & P for laying in trenches double socket C.I. bend, A/S C.I. tee, collar, flanged socket tailpice/ spigot tail piece & D/S taper etc. conforming to I S :1538 of the following nominal dia. as per spection complete inculding transportation of all materials to site (excluding earth work.) |
| 21 | Cost of DI Specials & fittings (IS: 1538-2001). Payment will made as per actual weight of specials and fittings supplied. |
| 22 | 250 mm dia 12 mm thick MS flange |
| 23 | 200 mm dia 12 mm thick MS flange |
| 24 | 150 mm dia 10 mm thick MS flange |
| 25 | 100 mm dia 10 mm thick MS flange |
| 26 | Supplying all labour T&P, providing Flanged Joints conforming to IS : 3114-1994 to flanged cast iron pipes and fittings of the following nominal diameter inculding testing of joints, cost of bolts and nuts and rubber insertations as per specifications complete.250mm Dia. MS Flange |
| 27 | 200mm Dia. MS Flange |
| 28 | 150mm Dia. MS Flange |
| 29 | 100mm Dia. MS Flange |
| 30 | Supply of all labour, T&P and M.S. pipe of Medium Class (ISI Marked) of the following out side diametre conforming to IS:3589-2001 for fabrication of different size of M.S. specials including laying ln trenches, jointing, fitting, fixing of pipe line and specials making welding, jointing and flange joint where ever required.The welding shall confirm to I.S. standard & electrodes use shall have I.S. certification mark. The welding of pipe and fitting shall be done by diesel generator set as per the site condition.The pipe andfitting shall be painted with two coats of brown anticorrosive paint over a coat of primer etc. all complete and transportation to site as per direction of Engineer-in-charge. (Earthwork in trenches, jointing of pipes, specials and fittings to be measured separately). 273.00 O.D MS pipe of 6.30 mm thickness of& ISI Marked. |
| 31 | 219.10 O.D MS pipe of 6.3 mm thickness of Medium Class & ISI Marked. |
| 32 | 168.30mm OD of thickness 4.50mm of Medium Class & ISI Marked. |
| 33 | 110.00 mm OD of thickness 4.00 mm of Medium Class & ISI Marked. |
| 34 | Flame cutting and facing of MS plate upto 8mm thick as per specification complete. |
| 35 | Providing joints by welding with two welding beads / pass,conforming to IS-816-1998 (Fillet weld) to MS pipes and fittings at site by using welding, generator including testing of joints, as per specification complete. |
| 36 | Supplying all materials, labour and T & P etc. and construction of valve chamber of following sizes with 100mm thick sand filling in foundation and inside chamber, lean cement concrete (1:4:8) of 100 mm thick, fly ash brick masonry in cement mortar (1:4) of 250mm thick wall in foundation and plinth, 12 mm thick cement plaster (1:6) inside, 100 mm thick cover slab in M-20 R.C.C. (1 : 1½ : 3) using minimum reinforcement of HYSD bar in cover slab at 100Kg. per each Cum. of RCC, 50mm thick cement concrete (1:2:4) in bed and wall top including centring and shuttering, earthwork in all kinds of soil and refilling etc. as per specification and direction of the Engineer-in-charge, including transportation of all materials to site, all complete. Sluice ValveChambersofinsidesize1.50m x 1.50m x 2-0m |
| 37 | Soil testing, Design, Drawing, Construction, cube testing, Testing andCommissioning with arrangement forInlet, Outlet, Washout, Overflow, Bypass Pipeing arrangement with stainless steel stair ladder and all other ancilary work as per the site requiement for 5.00 lakh ltr. UGR with water proofing compound to the inside face of container and as per the direction of engineer in-charge.A) Near Bhramarpalli Pump House |
| 38 | Soil testing, Design (Aesthetically), Drawing, Construction, erection, cube testing, Testing andCommissioning with arrangement for Inlet, Outlet, Washout, Overflow, Bypass Pipeing arrangement with valves, fixing of accessories and all other ancillary work as per the site requiement for 1.50 lakh ltr. RCC ESR (upto 20.00 Meter Height) staging with water proofing compound to the inside face of container Near BhramarpalliPump House, Binika. and as per the direction of engineer in-charge. |
| 39 | Design, drawing, with prior submission and approval of pump performance Data sheet and curve with Pump & Motor GA Drawing and Supplying, fitting, fixing, testing and commissioning of 30 HP Three Phase Open Well Horizontal Submersible Mono Set Pump Set having Discharge range 52 to 40 LPS at a Head of 26 to 34.00 Mtr. with Delivery size 150mm and Suction size 150mminculding flange, fittings with pressure gauge etc. and all ancilary work as per site requiement in complete with one year free maintenance by agency and as per direction of Engineer-in-charge. Make : Luby/KSB/Kirloskar/Willo (Delivery Challan, Warrenty card cum Testing certificate, Invoice of authorised supplied company and Detail list for tools & accessories to be submitted at the time of delivery) |
| 40 | Supplying, fitting and fixing of Three Phase Star DeltaPremium with short Circuit Protection Submersible Pump starter with 3 position selection, Relay Range 37.6 to 60.00 Amp, with Volt Meter, Amp Meter, Single Phase Preventer, Short Circuit Protection through MCB, Contractor protection etc. having Contractor Rating-70A, Make - BCH / C&S / L&T, |
| 41 | Supplying, fabricating, Fitting, Fixing of 50x50x5mm thjick MS Angle and clamp for holding of M.S. Pipes, Motor pump set andPanel board and MS Box for panel board as per the direction of engineer in-charge in complete manner |
| 42 | Supplying, fitting, fixing all materials, labour, T & P for earthing with 40mm Dia. GI Pipe 3meter long with flange etc. all complete. |
| 43 | Supplying, fitting, fixing of 25mm x 5 mm GI Flat for earthing |
| 44 | Supplying, fitting, fixing of nuts and bolts for earthing |
