Rural Development Government Departments Closing in 0 days TDR #33304850

Under Jal Jeevan Mission Programme Wadgaonpingala Water Supply Scheme Tal. Sinnar Dist.Nashik ( Iind Call )

Issued by Government Departments · sinnar, Maharashtra
Tender Value
2.16 Crore
Estimated cost
Bid Submission
06 Aug 2022
0 days left
EMD
1.50 Lakhs
Bank guarantee accepted
Document Fee
11800
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
sinnar → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Under Jal Jeevan Mission Programme Wadgaonpingala Water Supply Scheme Tal. Sinnar Dist.Nashik ( Iind Call )

BOQ

Name of Work : Under Jal Jeevan Mission Programme Vadgaon Pingla Village Water Supply Scheme Tal. Sinnar, Dist. Nashik
Sl. No. Item Description
1Sub Work No. 1 -RCC SUMP 20,000 LTR AND OVERHEAD PUMPHOUSEItem No. 1 -Designing (aesthetically), and constructing RCC ground service reservoirs / RCC sumps in M-300 mix. of required capacity including excavation in all types of strata, foundation concrete, container walls, bottom slab top RCC roof slab / or dome, 20 mm thick cement plaster with water proofing compound in CM 1:3 proportion. to inside face of the container, including epoxy paint from inside including refilling and disposing of surplusstuff within lead of 50 M, all labour and material charges, for laying and jointing of pipe assembly for inlet, outlet washout, over flow and bye-pass arrangement consisting of C.I./ M.S. D/F. pipes, specials and valves of given diameters. (Other details are as per Concern MJP DSR)
2Item No. 2 - Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete.Inlet Sluice Valve 80 mm Dia (PN 1)
3Bypass Sluice Valve 80 mm Dia (PN 1)
4Outlet Sluice Valve 80 mm Dia (PN 1)
5Washout Sluice Valve 80 mm Dia (PN 1)
6Item No. 3 -Providing ISI standard R.C.C. pipes in standard lengths of following class and diametersuitableforeithercollarjointsor rubberringjoints,excludingGSTlev-iedby GOI&GOMinallrespectincludinginspec- tion charges, transport to departmental stores, unloading and stacking etc. complete as per IS-458/1988.RCC NP II 200 mm dia Pipe
7Item No. 4 - Excavation for foundation /pipe trenches in earth, soils of all types, gravel & soft murum, including removing the excavated material upto a distance of 50 M & lift as below, stacking & spreading asdirected, normal dewatering, preparing the bed for foundation and excluding backfilling
8Item No. 5 - Providing dry trap/granite/quartzite/gneiss, rubble stone soling in 15 cm to 20 cm thick layers (including hand packing and compacting), etc. complete
9Item No. 6 - Providing and laying in situ, cement concrete M-15 / 1:2:4 of trap/granite/quartzite/gneiss metal for foundation and bedding including bailing outwater manually, formwork, compacting, covering newly laid concrete by gunny bag, plastic or tarpaulingcuring etc. complete.(Wooden planks/ shuttering will not be allowed)
10Item No. 7 - Providing and casting in situ Cement Concrete of trap/granite/quartzite/ gneiss metal of approved quality for RCC work as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, plywood form work,bully/steel prop ups, compaction, finishing the formed surfaces with CM 1:3 of sufficient minimum thickness if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C. C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted) For Column
11Item No. 8 - Providing Bricks masonry in cement mortar 1:6 using Second Class Burnt Bricks bricks in superstructure including striking joints, raking out joints, watering and scaffolding complete.
12Item No. 9 - Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete
13Item No. 10 - Providing and fixing the country cut teak wood double or single leaf second class fully paneled doors for exterior wallventilatoras per detailed drawing including iron oxidised fixture and fastenings the wood work with one coat of primer (excluding the door frame)complete.
14Item No. 11 - Providing and fixing steel windows of various sizes as per detailed drawings with welded square bars 12 mm at 10 cm centre to centre without hot dip zinc coating without/with ventilator including fabrication, glazing with non-acetinic/ plain/ obscured glass panes of approved type and quality, all fixtures and fastenings without teak wood boxing, and architraves and finishing with one coat of primer complete.
15Item No. 12 - Providing and casting in situ Cement Concrete of trap/granite/quartzite/ gneiss metal of approved quality for RCC work as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, plywood form work,bully/steel prop ups, compaction, finishing the formed surfaces with CM 1:3 of sufficient minimum thickness if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C. C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted)For Beam M200
16Item No. 13 -Providing and casting in situ C. C. of trap / granite / quartzite/ gneiss metal of approved quality for RCC works as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, centering, form work, compaction, finishing the formed surfaces with C. M. 1:3 of sufficient minimum thickness to give a smooth and even surface wherever nesessary or roughening if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.)R.C.C. Slab M200
17Item No. 14 -Providing and casting in situ Cement Concrete of trap/granite/quartzite/ gneiss metal of approved quality for RCC work as per detailed drawings and designs or as directed by Engineer-in-charge including normal dewatering, plywood form work,bully/steel prop ups, compaction, finishing the formed surfaces with CM 1:3 of sufficient minimum thickness if special finish is to be provided and curing, etc. complete. (By weigh batching and mix design for M-250 and M-300 only. Use of L&T, A.C. C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted)R.C.C. Chajja M200
18Item No. 15 - Providing and fixing in position steel bar reinforcement of various diameters for RCC pipes, caps, footings, foundation, slabs, beams, columns, canopies, staircases. newels, chajjas, lintels, pardies, copings, fins, arches, etc. as per detailed designs, drawings and schedules; including cutting, bending, hookingthe bars, binding with wires or tack welding and supporting as required, etc. complete.(including cost of binding wire).
19Item No. 16 -Providing internal cement plaster 20 mm thick in two coats in cement mortar 1:3 without neeru finish, to concrete, brick surfaces in all positions including scaffolding and curing complete.
20Item No. 17 - Providing sand faced plaster externally in cement mortar using Kharasalia/ Kasaba or similar type of sand, in all positions including base coat of 15 mm thick in CM 1:4 using water proofing compound at 1 Kg. per bag, curing the same for not less than 3 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in CM 1:4, finishing the surface by taking out grains and curing for fourteen days, scaffolding etc. complete.
21Item No. 18 - Providing and laying cement concrete flooring 50 mm thick with 1:2:4: cement concrete lead to proper level and slope in alternater bays including compaction filling joints marking line to gave the apperance to tilles of 30 cm x 30 cm or other size lwad diagonally / square etc.finishing smooth (with extra cement) in any colour as directed and curing complete.
22Item No. 19 - Providing and applying plastic emulsion paints of approved quality, colour,and shade to old/new surfaces in two coats including scaffolding, preparing the surface including prime coat etc. complete.
23Item No. 20- Providing and applying white wash in two coats on old /new plastered or masonry surface and asbestos cement sheets including scaffolding and preparing the surface by brushing and brooming down, etc. complete.
24Item No. 21 - Providing and applying two coats of exterior acraylic emulsion paint confirming to corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces including cleaning preparing the plaster surface applying prime coad , scaffolding if necessary and watering the surface for two days etc complete
25Sub Work No. 2 - Pumping Machinery Item No. 1 - Providing and erecting and giving test of 100 mm dia submersible pump sets conforming to IS 8034 and motor conforming to9283. pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and bronze impelier .Motor suitable for working on 415v+10% ph 50hz A.C supply with cable guard ,thrust carbon /bed bearing to with stand with cable entire hydraulic thrust,waterproof winding shall be provided .The pump set shall be suitable for direct coupling ,pump shall have suitable out let as per manufactures design ,Anti thrust stream lined non return valve shall be provided with the pump .Suitable valve shall be provided with the pump .Suitable suction strainer shall also be provided .3 core ,single /double run copper conductor submersible type of flat cable 3 m and 2 pairs of erection 65 mm width 10 mm be provided along with thepump rates per pump up to 8 stages are as below.Pump Sets 3 HP
26Item No. 2 -Supplying and erecting G. I. Pipe in position for suction, delivery for centrifugal pump, vacuum pump and drop for submersible pump including plumbing with socket and necessary material. G. I. Pipe ‘C’ ClassGI 65 mm dia Class- C
27Item No. 3 - Providing lowering, laying & jointing 3.5 core x 50 sqmm alluminium conductor armoured cable from MSEDCL point to incommer of Panel etc.comp.
28Item No. 5 - Supplying & erecting automatic control panel for 3 Ph, 415 volt, A.c.Submersible/centrifugal pump set upto 10 HP consisting of Star Delta starter having relay range 6-10 Amp, S.P.P., Combined ammeter/ voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase imbalance etc.
29Item No. 6 - Providing tools for pumping.1) Double ended open jaws spanner of selected carbon steel and chrome plated size 6-32 mm (set of 12 pieces) - 1 Set, 2) Ring spanner set (bi-hexagonal) shallow half set selected carbon steel and chrome plated size 6-32mm (set of 12 pieces) - 1 Set, 3) Ball pein hammer with handle 800 gms - 1 No., 4)Insulated combination cutting plier 200 mm - 1 No., 5) Adjustable screw-wrench 250 mm - 1 No., 6)Pipe wrench stilson .: selected carbon steel chrome plated size 450 mm - 60 mm - 1 No., 600 mm - 76 mm - 1 No., 7) Screwdriver electrical patterned blade for selected steel chrome plated size 6 X 300 mm - 1 No., 8 X 200 mm - 1 No.,8) Hacksaw frame 300 mm size with heavy duty blade - 1 No., 9) Tool Box fabricated from MS Sheet 50 x 50 x 30 cm - 1 No., 10) Electronic supply tester - 1 No.
30Item No. 7 -Supply and erecting,flat flexible submersible cable with, copper conductor, PVC insulated, and PVC Seathed 3 x 10 core Submersible Cable
31Item No. 8 Providing earthing with Galvanized cast iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results asper specification No. EA-EP
32Item No. 9 - Providing eredcting triple spur gear type chain pully block suitable for capacity as below with 6 m lift complete with load chain and hand chaon suitable for above lift tested to 50 % over load as per IS 3832 carrying ISI mark1 Tonne Capacity
33Sub Work No. 3 - Pumping Machinery Item No. 1 - Providing and erecting and giving test of 100 mm dia submersible pump sets conforming to IS 8034 and motor conforming to9283. pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and bronze impelier .Motor suitable for working on 415v+10% ph 50hz A.C supply with cable guard ,thrust carbon /bed bearing to with stand with cable entire hydraulic thrust,waterproof winding shall be provided .The pump set shall be suitable for direct coupling ,pump shall have suitable out let as per manufactures design ,Anti thrust stream lined non return valve shall be provided with the pump .Suitable valve shall be provided with the pump .Suitable suction strainer shall also be provided .3 core ,single /double run copper conductor submersible type of flat cable 3 m and 2 pairs of erection 65 mm width 10 mm be provided along with thepump rates per pump up to 8 stages are as below.Pump Sets 5 HP
34Item No. 2 -Supplying and erecting G. I. Pipe in position for suction, delivery for centrifugal pump, vacuum pump and drop for submersible pump including plumbing with socket and necessary material. G. I. Pipe ‘C’ ClassGI 65 mm dia Class- C
35Item No. 3 - Providing lowering, laying & jointing 3.5 core x 50 sqmm alluminium conductor armoured cable from MSEDCL point to incommer of Panel etc.comp.
36Item No. 5 - Supplying & erecting automatic control panel for 3 Ph, 415 volt, A.c.Submersible/centrifugal pump set upto 10 HP consisting of Star Delta starter having relay range 6-10 Amp, S.P.P., Combined ammeter/ voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase imbalance etc.
37Item No. 6 - Providing tools for pumping.1) Double ended open jaws spanner of selected carbon steel and chrome plated size 6-32 mm (set of 12 pieces) - 1 Set, 2) Ring spanner set (bi-hexagonal) shallow half set selected carbon steel and chrome plated size 6-32mm (set of 12 pieces) - 1 Set, 3) Ball pein hammer with handle 800 gms - 1 No., 4)Insulated combination cutting plier 200 mm - 1 No., 5) Adjustable screw-wrench 250 mm - 1 No., 6)Pipe wrench stilson .: selected carbon steel chrome plated size 450 mm - 60 mm - 1 No., 600 mm - 76 mm - 1 No., 7) Screwdriver electrical patterned blade for selected steel chrome plated size 6 X 300 mm - 1 No., 8 X 200 mm - 1 No.,8) Hacksaw frame 300 mm size with heavy duty blade - 1 No., 9) Tool Box fabricated from MS Sheet 50 x 50 x 30 cm - 1 No., 10) Electronic supply tester - 1 No.
38Item No. 7 -Supply and erecting,flat flexible submersible cable with, copper conductor, PVC insulated, and PVC Seathed 3 x 10 core Submersible Cable
39Item No. 8 Providing earthing with Galvanized cast iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results asper specification No. EA-EP
40Item No. 9 - Providing eredcting triple spur gear type chain pully block suitable for capacity as below with 6 m lift complete with load chain and hand chaon suitable for above lift tested to 50 % over load as per IS 3832 carrying ISI mark1 Tonne Capacity
41Sub Work No. 4 - Pure Water Rising Main Item No. 1 - Providing ISI mark G.I. pipe of following class and dia.excludingGSTleviedbyGOI&GOMinall respect, inspection charges, transportation to stores, etc. complete as per IS-1239/2004.Note : One coupler shall be provided with each full length of pipe cost of which is included in rates below.GI 80 mm dia Class- B
42Item No. 2 - Providingandsupplyinginstandardlengths ISI mark rigid unplasticised PVC pipes suitable for potable water with solvent cement jointsincludingcostofcouplers,asperIS specificationno.4985/1988excludingGST levied by GOI and GOM in all respect, including transportation, freight charges, inspection charges, loading, unloading, conveyance to the departmental stores and stacking the same in closed shed duly protected from sun rays and rainsincludingcostofjointingmateriali.e. solvent cement, etc. complete (selffit type to be jointed with cement solvent). PVC Pipe 90 mm dia, 6 kg/cm2
43Item No. 3 -Providing G.I Pipe specials as per standard specifications & direction of incharge Engineer. Required specials as per bill Only.
44Item No. 3 - Providing PVC specials as per standard specifications & direction of incharge Engineer. Required specials as per bill Only.
45Item No. 4Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges,transportationuptodepartmental store, unloading, stackingexcluding GST leviedbyGOI&GOMinallrespectetc. complete.Sluice Valve 80 mm dia PN 1
46Item No. 5 - ProvidingandsupplyingISImarkCID/F reflux valves (non-return valves ) of following dia including railway freight, inspection charges, unloading from railway wagon, loadingintotruck,transportationupto departmental stores, unloading, stacking excludingGSTleviedbyGOI&GOMinall respect etc. complete.Reflux valves as per I.S.5312 Part I (1984).Reflux Valve 80 mm dia PN 1
47Item No. 6Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges,transportationuptodepartmental store, unloading, stackingexcluding GST leviedbyGOI&GOMinallrespectetc. complete.Sluice Valve for washout 80 mm dia PN 1
48Item No. 7 Providingandsupplying Air Valves asper IS-14845-2000andMJP’sstandard specifications of approved make andquality of following diameters including railway freight,inspectioncharges,unloadingfrom railway wagons, loading into truck, transportation upto departmental stores, unloding and stacking excluding GSTlevied by GOI & GOM in all respect etc. complete.Air Valve 25 mm dia PN 1
49Item No. 8 - Excavation for foundation/ pipe trenches in earth, soils of all types, sand gravel and soft murum, including removing the excavated material upto a distance of 50 meters & lifts as below, stacking & spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete.
50Item No. 9 - Excavation for foundation/ pipe trenches in hard murum and boulders, W.B.M. road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding back- filling, etc. complete.
51Item No. 10 - Excavation for foundation/ pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyondarea and lifts as below, stacking as directed by Engineer-in-charges, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete.
52Item No. 11 - Excavation for foundation / pipe trenches in hard rock by controlled blasting, including trimming and levelling the bed by chiselling where necessary and removing the excavated material and stacking it in measurable heaps within a distance of 50 metres from the area and lifts as below, normal dewatering, excluding backfilling, etc. complete.
53Item No. 12 - Filling in plinth and floors murum bedding in trenches with approved murum from excavated materials from foundation 15cm to 20cm layers including watering and compaction complete.
54Item No. 13 - Lowering,layingandj ointingG.I .pipesand specials of following class and diameter including conveyance from stores to site of works, all labour, etc.completeeither undergroundorinvertical position, as directed by Engineer-in-charge.GI 80 mm dia Class- B
55Item No. 14 -Lowering,layingand jointingwithP.V.C. pipesandspecialsoffollowingclassand diameterincludingcostofconveyancefrom storestositeofworksincludingcostofall labour, material, except cement solvent, rubber ring, as per IS code, etc. complete (with cement solvent joint / ring fit joint).PVC Pipe 90 mm dia, 6 kg/cm2
56Item No. 15 - Lowering, laying and jointing in position followingC.I.D/FReflexvalves,Butterfly valvesandSluicevalvesincludingcostof all labour jointing material, including nut bolts andgivingsatisfactoryhydraulictestingetc. complete. (Rate for all class of valves.)Sluice Valve 80 mm dia
57Item No. 16 - Lowering, laying, jointing in positionfollowing CIDF Reflux, butterfly valves and sluice valves including cost of all labors jointing material including nutbolts and giving satisfactory hydraulic testing etc complete (Rates for all class of valves)Reflux Valve 80 mm dia
58Item No. 17 - Lowering, laying and jointing in position followingC.I.D/FReflexvalves,Butterfly valvesandSluicevalvesincludingcostof all labour jointing material, including nut bolts andgivingsatisfactoryhydraulictestingetc. complete. (Rate for all class of valves.)Sluice Valve 80 mm dia
59Item No. 19 - Providing and fixing in position air valve shaft including providing and fixing GI Medium Class or 6 mm thick M.S. pipe shaft 2.70 M long over branch flange of air valve tee, providing PCC block of M-150 concrete 150 mm thick around the air valve tee including encasing of vertical shaft in PCC M-150 as shown in type design together with providing and making flanged joints wherever required and fixing of air valve over the shaft excluding cost of air valve and branch flanged air valve tee. etc. complete as per type design and as directed by Engineer-in-charge for following diameters of pipe lines.
60Item No. 20 - Providing and laying in situ following grades of C.C. of trap/granite/quartzite/ gneiss metal for foundation and bedding including dewatering, form work, compacting and curing finishing etc. complete.1:2:4 (M-150 ) grade for encasing
61Item No. 21 - Providing and constructing B.B. masonry valve chamber with 15 cm thick 1:3:6 proportion PCC bedding, excluding excavation, B.B. masonry in C.M. 1:5 Proportion precast RCC frame and cover, etc. complete as directed by Engineer-in-charge.
62Item No. 22 - Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete.
63Item No. 23 - HydraulictestingofG. I.pipelinetospecified pressure including cost of all materials and labour and water for testing for the length upto 1km using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessaryequipments,labouroperationcharges etc. required for testing, The rates under this item shall also include cost of retesting if necessary and reinstating to original postion.GI 80 mm dia Class- B
64Item No. 24 - Hydraulic testing of PVC pipe line to specified pressure includingcost ofall materialsandlabourandwaterfortestingfor specifiedlengthincludingcutting,placingend capmakingarrangementforfillingsafewater usingreciprocatingtypepumpswhichshould beabletoprovidespecifiedtestpressure gauges and other necessary equipments, labour,operationcharges,etc.requiredfor testing.Therateunderthisitemshallalso includecostofretesting,ifnecessaryand reinstating to original position.PVC Pipe 90 mm dia, 6 kg/cm2
65Item No. 25 - Giving satisfactory hydraulic testing of following C.I. D / F Reflex valves, Butterfly valves and Sluice valves.Sluice Valve 80 mm dia PN 1
66Sluice Valve 80 mm dia PN 1
67Sluice Valve 80 mm dia PN 1 for Washout
68Sub Work No. 5 - Pure Water Rising Main Item No. 1 - Providing ISI mark G.I. pipe of following class and dia.excludingGSTleviedbyGOI&GOMinall respect, inspection charges, transportation to stores, etc. complete as per IS-1239/2004.Note : One coupler shall be provided with each full length of pipe cost of which is included in rates below.GI 100 mm dia Class- C
69Item No. 2 - Providingandsupplyinginstandardlengths ISI mark rigid unplasticised PVC pipes suitable for potable water with solvent cement jointsincludingcostofcouplers,asperIS specificationno.4985/1988excludingGST levied by GOI and GOM in all respect, including transportation, freight charges, inspection charges, loading, unloading, conveyance to the departmental stores and stacking the same in closed shed duly protected from sun rays and rainsincludingcostofjointingmateriali.e. solvent cement, etc. complete (selffit type to be jointed with cement solvent). PVC Pipe 110 mm dia, 6 kg/cm2
70Item No. 3 -Providing G.I Pipe specials as per standard specifications & direction of incharge Engineer. Required specials as per bill Only.
71Item No. 3 - Providing PVC specials as per standard specifications & direction of incharge Engineer. Required specials as per bill Only.
72Item No. 4Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges,transportationuptodepartmental store, unloading, stackingexcluding GST leviedbyGOI&GOMinallrespectetc. complete.Sluice Valve 100 mm dia PN 1
73Item No. 5 - ProvidingandsupplyingISImarkCID/F reflux valves (non-return valves ) of following dia including railway freight, inspection charges, unloading from railway wagon, loadingintotruck,transportationupto departmental stores, unloading, stacking excludingGSTleviedbyGOI&GOMinall respect etc. complete.Reflux valves as per I.S.5312 Part I (1984).Reflux Valve 100 mm dia PN 1
74Item No. 6Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges,transportationuptodepartmental store, unloading, stackingexcluding GST leviedbyGOI&GOMinallrespectetc. complete.Sluice Valve for washout 80 mm dia PN 1
75Item No. 7 Providingandsupplying Air Valves asper IS-14845-2000andMJP’sstandard specifications of approved make andquality of following diameters including railway freight,inspectioncharges,unloadingfrom railway wagons, loading into truck, transportation upto departmental stores, unloding and stacking excluding GSTlevied by GOI & GOM in all respect etc. complete.Air Valve 25 mm dia PN 1
76Item No. 8 - Excavation for foundation/ pipe trenches in earth, soils of all types, sand gravel and soft murum, including removing the excavated material upto a distance of 50 meters & lifts as below, stacking & spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete.
77Item No. 9 - Excavation for foundation/ pipe trenches in hard murum and boulders, W.B.M. road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding back- filling, etc. complete.
78Item No. 10 - Excavation for foundation/ pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyondarea and lifts as below, stacking as directed by Engineer-in-charges, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete.
79Item No. 11 - Excavation for foundation / pipe trenches in hard rock by controlled blasting, including trimming and levelling the bed by chiselling where necessary and removing the excavated material and stacking it in measurable heaps within a distance of 50 metres from the area and lifts as below, normal dewatering, excluding backfilling, etc. complete.
80Item No. 12 - Filling in plinth and floors murum bedding in trenches with approved murum from excavated materials from foundation 15cm to 20cm layers including watering and compaction complete.
81Item No. 13 - Lowering,layingandj ointingG.I .pipesand specials of following class and diameter including conveyance from stores to site of works, all labour, etc.completeeither undergroundorinvertical position, as directed by Engineer-in-charge.GI 100 mm dia Class- C
82Item No. 14 -Lowering,layingand jointingwithP.V.C. pipesandspecialsoffollowingclassand diameterincludingcostofconveyancefrom storestositeofworksincludingcostofall labour, material, except cement solvent, rubber ring, as per IS code, etc. complete (with cement solvent joint / ring fit joint).PVC Pipe 110 mm dia, 6 kg/cm2
83Item No. 15 - Lowering, laying and jointing in position followingC.I.D/FReflexvalves,Butterfly valvesandSluicevalvesincludingcostof all labour jointing material, including nut bolts andgivingsatisfactoryhydraulictestingetc. complete. (Rate for all class of valves.)Sluice Valve 100 mm dia
84Item No. 16 - Lowering, laying, jointing in positionfollowing CIDF Reflux, butterfly valves and sluice valves including cost of all labors jointing material including nutbolts and giving satisfactory hydraulic testing etc complete (Rates for all class of valves)Reflux Valve 100 mm dia
85Item No. 17 - Lowering, laying and jointing in position followingC.I.D/FReflexvalves,Butterfly valvesandSluicevalvesincludingcostof all labour jointing material, including nut bolts andgivingsatisfactoryhydraulictestingetc. complete. (Rate for all class of valves.) Sluice Valve 150 mm diaSluice Valve 80 mm dia
86Item No. 19 - Providing and fixing in position air valve shaft including providing and fixing GI Medium Class or 6 mm thick M.S. pipe shaft 2.70 M long over branch flange of air valve tee, providing PCC block of M-150 concrete 150 mm thick around the air valve tee including encasing of vertical shaft in PCC M-150 as shown in type design together with providing and making flanged joints wherever required and fixing of air valve over the shaft excluding cost of air valve and branch flanged air valve tee. etc. complete as per type design and as directed by Engineer-in-charge for following diameters of pipe lines.
87Item No. 20 - Providing and laying in situ following grades of C.C. of trap/granite/quartzite/ gneiss metal for foundation and bedding including dewatering, form work, compacting and curing finishing etc. complete.1:2:4 (M-150 ) grade for encasing
88Item No. 21 - Providing and constructing B.B. masonry valve chamber with 15 cm thick 1:3:6 proportion PCC bedding, excluding excavation, B.B. masonry in C.M. 1:5 Proportion precast RCC frame and cover, etc. complete as directed by Engineer-in-charge.
89Item No. 22 - Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete.
90Item No. 23 - HydraulictestingofG. I.pipelinetospecified pressure including cost of all materials and labour and water for testing for the length upto 1km using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessaryequipments,labouroperationcharges etc. required for testing, The rates under this item shall also include cost of retesting if necessary and reinstating to original postion.GI 100 mm dia Class- C
91Item No. 24 - Hydraulic testing of PVC pipe line to specified pressure includingcost ofall materialsandlabourandwaterfortestingfor specifiedlengthincludingcutting,placingend capmakingarrangementforfillingsafewater usingreciprocatingtypepumpswhichshould beabletoprovidespecifiedtestpressure gauges and other necessary equipments, labour,operationcharges,etc.requiredfor testing.Therateunderthisitemshallalso includecostofretesting,ifnecessaryand reinstating to original position.PVC Pipe 110 mm dia, 6 kg/cm2
92Item No. 25 - Giving satisfactory hydraulic testing of following C.I. D / F Reflex valves, Butterfly valves and Sluice valves.Sluice Valve 100 mm dia PN 1
93Reflux Valve 100 mm dia PN 1
94Sluice Valve 80 mm dia PN 1 for Washout
95Sub Work No. 6 - Pure Water Rising Main Item No. 1 - Providing ISI mark G.I. pipe of following class and dia.excludingGSTleviedbyGOI&GOMinall respect, inspection charges, transportation to stores, etc. complete as per IS-1239/2004.Note : One coupler shall be provided with each full length of pipe cost of which is included in rates below.GI 80 mm dia Class- B
96Item No. 2 - Providingandsupplyinginstandardlengths ISI mark rigid unplasticised PVC pipes suitable for potable water with solvent cement jointsincludingcostofcouplers,asperIS specificationno.4985/1988excludingGST levied by GOI and GOM in all respect, including transportation, freight charges, inspection charges, loading, unloading, conveyance to the departmental stores and stacking the same in closed shed duly protected from sun rays and rainsincludingcostofjointingmateriali.e. solvent cement, etc. complete (selffit type to be jointed with cement solvent). PVC Pipe 90 mm dia, 6 kg/cm2
97Item No. 3 -Providing G.I Pipe specials as per standard specifications & direction of incharge Engineer. Required specials as per bill Only.
98Item No. 3 - Providing PVC specials as per standard specifications & direction of incharge Engineer. Required specials as per bill Only.
99Item No. 4Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges,transportationuptodepartmental store, unloading, stackingexcluding GST leviedbyGOI&GOMinallrespectetc. complete.Sluice Valve 80 mm dia PN 1
100Item No. 5 - ProvidingandsupplyingISImarkCID/F reflux valves (non-return valves ) of following dia including railway freight, inspection charges, unloading from railway wagon, loadingintotruck,transportationupto departmental stores, unloading, stacking excludingGSTleviedbyGOI&GOMinall respect etc. complete.Reflux valves as per I.S.5312 Part I (1984).Reflux Valve 80 mm dia PN 1
101Item No. 6Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges,transportationuptodepartmental store, unloading, stackingexcluding GST leviedbyGOI&GOMinallrespectetc. complete.Sluice Valve for washout 80 mm dia PN 1
102Item No. 7 Providingandsupplying Air Valves asper IS-14845-2000andMJP’sstandard specifications of approved make andquality of following diameters including railway freight,inspectioncharges,unloadingfrom railway wagons, loading into truck, transportation upto departmental stores, unloding and stacking excluding GSTlevied by GOI & GOM in all respect etc. complete.Air Valve 25 mm dia PN 1
103Item No. 8 - Excavation for foundation/ pipe trenches in earth, soils of all types, sand gravel and soft murum, including removing the excavated material upto a distance of 50 meters & lifts as below, stacking & spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete.
104Item No. 9 - Excavation for foundation/ pipe trenches in hard murum and boulders, W.B.M. road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding back- filling, etc. complete.
105Item No. 10 - Excavation for foundation/ pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyondarea and lifts as below, stacking as directed by Engineer-in-charges, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete.
106Item No. 11 - Excavation for foundation / pipe trenches in hard rock by controlled blasting, including trimming and levelling the bed by chiselling where necessary and removing the excavated material and stacking it in measurable heaps within a distance of 50 metres from the area and lifts as below, normal dewatering, excluding backfilling, etc. complete.
107Item No. 12 - Filling in plinth and floors murum bedding in trenches with approved murum from excavated materials from foundation 15cm to 20cm layers including watering and compaction complete.
108Item No. 13 - Lowering,layingandj ointingG.I .pipesand specials of following class and diameter including conveyance from stores to site of works, all labour, etc.completeeither undergroundorinvertical position, as directed by Engineer-in-charge.GI 80 mm dia Class- B
109Item No. 14 -Lowering,layingand jointingwithP.V.C. pipesandspecialsoffollowingclassand diameterincludingcostofconveyancefrom storestositeofworksincludingcostofall labour, material, except cement solvent, rubber ring, as per IS code, etc. complete (with cement solvent joint / ring fit joint).PVC Pipe 90 mm dia, 6 kg/cm2
110Item No. 15 - Lowering, laying and jointing in position followingC.I.D/FReflexvalves,Butterfly valvesandSluicevalvesincludingcostof all labour jointing material, including nut bolts andgivingsatisfactoryhydraulictestingetc. complete. (Rate for all class of valves.)Sluice Valve 80 mm dia
111Item No. 16 - Lowering, laying, jointing in positionfollowing CIDF Reflux, butterfly valves and sluice valves including cost of all labors jointing material including nutbolts and giving satisfactory hydraulic testing etc complete (Rates for all class of valves)Reflux Valve 80 mm dia
112Item No. 17 - Lowering, laying and jointing in position followingC.I.D/FReflexvalves,Butterfly valvesandSluicevalvesincludingcostof all labour jointing material, including nut bolts andgivingsatisfactoryhydraulictestingetc. complete. (Rate for all class of valves.)Sluice Valve 80 mm dia
113Item No. 19 - Providing and fixing in position air valve shaft including providing and fixing GI Medium Class or 6 mm thick M.S. pipe shaft 2.70 M long over branch flange of air valve tee, providing PCC block of M-150 concrete 150 mm thick around the air valve tee including encasing of vertical shaft in PCC M-150 as shown in type design together with providing and making flanged joints wherever required and fixing of air valve over the shaft excluding cost of air valve and branch flanged air valve tee. etc. complete as per type design and as directed by Engineer-in-charge for following diameters of pipe lines.
114Item No. 20 - Providing and laying in situ following grades of C.C. of trap/granite/quartzite/ gneiss metal for foundation and bedding including dewatering, form work, compacting and curing finishing etc. complete.1:2:4 (M-150 ) grade for encasing
115Item No. 21 - Providing and constructing B.B. masonry valve chamber with 15 cm thick 1:3:6 proportion PCC bedding, excluding excavation, B.B. masonry in C.M. 1:5 Proportion precast RCC frame and cover, etc. complete as directed by Engineer-in-charge.
116Item No. 22 - Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete.
117Item No. 23 - HydraulictestingofG. I.pipelinetospecified pressure including cost of all materials and labour and water for testing for the length upto 1km using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessaryequipments,labouroperationcharges etc. required for testing, The rates under this item shall also include cost of retesting if necessary and reinstating to original postion.GI 80 mm dia Class- B
118Item No. 24 - Hydraulic testing of PVC pipe line to specified pressure includingcost ofall materialsandlabourandwaterfortestingfor specifiedlengthincludingcutting,placingend capmakingarrangementforfillingsafewater usingreciprocatingtypepumpswhichshould beabletoprovidespecifiedtestpressure gauges and other necessary equipments, labour,operationcharges,etc.requiredfor testing.Therateunderthisitemshallalso includecostofretesting,ifnecessaryand reinstating to original position.PVC Pipe 90 mm dia, 6 kg/cm2
119Item No. 25 - Giving satisfactory hydraulic testing of following C.I. D / F Reflex valves, Butterfly valves and Sluice valves.Sluice Valve 80 mm dia PN 1
120Sluice Valve 80 mm dia PN 1
121Sluice Valve 80 mm dia PN 1 for Washout
122Sub Work No. 7 -RCC ESR OF CAPACITY 30,000 LTR (Stg. Ht. 12 M)Item No. 1 -Designing (aesthetically), and constructing RCC elevated service reservoirs of following capacity with RCC staging consisting of columns, internal and external bracings spaced vertically not more than 4.5 meters centre to centre for E.S.R. having capacity 500 m3 & not more than 6 m c/cfor E.S.R.having capacity above 500 m3 including excavation in all types of strata, foundation concret, cement plaster with water proofing compound to the inside face of the container including refilling disposing of the surplus stuff within a lead of 50 meters, all labour and material chargesincluding lowering, laying, erecting, hoisting and jointing of pipe assembly of inlet, outlet, washout, overflow and bypass arrangements as per departmental design. (Other details are as per Concern MJP DSR)
123Item No. 2 - Providing and supplying ISI standard CI double flanged pipes excluding GST levied by GOI & GOM in all respect including railway freight, insurance, unloading from railway wagon, loading into truck transport to stores, unloading etc. complete as directed by Engineer-in-charge.CIDF Pipe 80 mm Dia
124Item No. 3 - M.S./ C.I. D/F pipes and specials in vertical position including cost of all jointing materials (rubber packing, nut bolts, etc.) labour,scaffolding,hydraulictestingetc. complete.CIDF Pipe Specials
125Item No. 4 - Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete.Inlet Sluice Valve 80 mm Dia (PN 1)
126Outlet Sluice Valve 80 mm Dia (PN 1)
127Bypass Sluice Valve 80 mm Dia (PN 1)
128Item No. 5 -Providing ISI standard R.C.C. pipes in standard lengths of following class and diametersuitableforeithercollarjointsor rubberringjoints,excludingGSTlev-iedby GOI&GOMinallrespectincludinginspec- tion charges, transport to departmental stores, unloading and stacking etc. complete as per IS-458/1988.RCC NP II 200 mm dia Pipe
129Sub Work No. 8 -RCC ESR OF CAPACITY 30,000 LTR (Stg. Ht. 12 M)Item No. 1 -Designing (aesthetically), and constructing RCC elevated service reservoirs of following capacity with RCC staging consisting of columns, internal and external bracings spaced vertically not more than 4.5 meters centre to centre for E.S.R. having capacity 500 m3 & not more than 6 m c/cfor E.S.R.having capacity above 500 m3 including excavation in all types of strata, foundation concret, cement plaster with water proofing compound to the inside face of the container including refilling disposing of the surplus stuff within a lead of 50 meters, all labour and material chargesincluding lowering, laying, erecting, hoisting and jointing of pipe assembly of inlet, outlet, washout, overflow and bypass arrangements as per departmental design. (Other details are as per Concern MJP DSR)
130Item No. 2 - Providing and supplying ISI standard CI double flanged pipes excluding GST levied by GOI & GOM in all respect including railway freight, insurance, unloading from railway wagon, loading into truck transport to stores, unloading etc. complete as directed by Engineer-in-charge.CIDF Pipe 80 mm Dia
131Item No. 3 - M.S./ C.I. D/F pipes and specials in vertical position including cost of all jointing materials (rubber packing, nut bolts, etc.) labour,scaffolding,hydraulictestingetc. complete.CIDF Pipe Specials
132Item No. 4 - Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete.Inlet Sluice Valve 80 mm Dia (PN 1)
133Outlet Sluice Valve 80 mm Dia (PN 1)
134Bypass Sluice Valve 80 mm Dia (PN 1)
135Item No. 5 -Providing ISI standard R.C.C. pipes in standard lengths of following class and diametersuitableforeithercollarjointsor rubberringjoints,excludingGSTlev-iedby GOI&GOMinallrespectincludinginspec- tion charges, transport to departmental stores, unloading and stacking etc. complete as per IS-458/1988.RCC NP II 200 mm dia Pipe
136Sub Work No. 9 -RCC ESR OF CAPACITY 65,000 LTR (Stg. Ht. 12 M)Item No. 1 -Designing (aesthetically), and constructing RCC elevated service reservoirs of following capacity with RCC staging consisting of columns, internal and external bracings spaced vertically not more than 4.5 meters centre to centre for E.S.R. having capacity 500 m3 & not more than 6 m c/cfor E.S.R.having capacity above 500 m3 including excavation in all types of strata, foundation concret, cement plaster with water proofing compound to the inside face of the container including refilling disposing of the surplus stuff within a lead of 50 meters, all labour and material chargesincluding lowering, laying, erecting, hoisting and jointing of pipe assembly of inlet, outlet, washout, overflow and bypass arrangements as per departmental design. (Other details are as per Concern MJP DSR)
137Item No. 1 - Dismantling of ESRs of various capacities and heights using crane (10 MT capacity) and handing over M.S./ C.I./G.I. pipes, valves, bends, etc. to the Department. However taking steel reinforcement by the dismantling agency including removing dismantled materials from site and disposing them at suitable place as directed, etc. complete.
138Item No. 2 - Providing and supplying ISI standard CI double flanged pipes excluding GST levied by GOI & GOM in all respect including railway freight, insurance, unloading from railway wagon, loading into truck transport to stores, unloading etc. complete as directed by Engineer-in-charge.CIDF Pipe 100 mm Dia
139Item No. 3 - M.S./ C.I. D/F pipes and specials in vertical position including cost of all jointing materials (rubber packing, nut bolts, etc.) labour,scaffolding,hydraulictestingetc. complete.CIDF Pipe Specials
140Item No. 4 - Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete.Inlet Sluice Valve 100 mm Dia (PN 1)
141Outlet Sluice Valve 100 mm Dia (PN 1)
142Bypass Sluice Valve 100 mm Dia (PN 1)
143Item No. 5 -Providing ISI standard R.C.C. pipes in standard lengths of following class and diametersuitableforeithercollarjointsor rubberringjoints,excludingGSTlev-iedby GOI&GOMinallrespectincludinginspec- tion charges, transport to departmental stores, unloading and stacking etc. complete as per IS-458/1988.RCC NP II 200 mm dia Pipe
144Sub Work No. 10 - Distribution SystemItem No. 1 - Providing ISI mark G.I. pipe of following class and dia.excludingGSTleviedbyGOI&GOMinall respect, inspection charges, transportation to stores, etc. complete as per IS-1239/2004.Note : One coupler shall be provided with each full length of pipe cost of which is included in rates below.GI Pipe 80 mm dia Class- B
145Item No. 2 - Providing and supplying in standard lengths ISI mark rigid unplasticised PVC pipes suitable for potable water with solvent cement joints including cost of couplers, as per IS specification no. 4985 / 1988 excluding GST levied by GOI and GOM in all respect, including transportation, freight charges, inspection charges, loading, unloading, conveyance to the departmental stores and stacking the same in closed shed duly protected from sun rays and rains including cost of jointing material i.e. solvent cement, etc. complete (selffit type to be jointed with cement solvent).160 mm dia 4 Kg/cm2 PVC Pipes
146110 mm dia 4 Kg/cm2 PVC Pipes
14790 mm dia 4 Kg/cm2 PVC Pipes
14875 mm dia 4 Kg/cm2 PVC Pipes
149Item No. 3- Providing GI/ HDPE/ PVC specials as per standard specifications & direction of incharge Engineer. Required specials as per bill Only.
150Item No. 4 - Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete.Sluice Valve 80 mm dia PN 1
151Sluice Valve 100 mm dia PN 1
152Sluice Valve 80 mm dia PN 1
153Item No. 5 - Excavation for foundation/ pipe trenches in earth, soils of all types, sand gravel and soft murum, including removing the excavated material upto a distance of 50 meters & lifts as below, stacking & spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete.
154Item No. 6 - Excavation for foundation/ pipe trenches in hard murum and boulders, W.B.M. road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding back- filling, etc. complete.
155Item No.7 - Excavation for foundation/ pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyondarea and lifts as below, stacking as directed by Engineer-in-charges, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete.
156Item No. 8 - Excavation for foundation / pipe trenches in hard rock and concrete road by chiselling, wedging, line drilling, by mechanical means or by all means other than blasting including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the area and lifts as below, stacking as directed by Engineer-in-charge, normal dewatering, excluding backfilling, etc. complete by all means.
157Item No. 9 - Filling in plinth and floors murum bedding in trenches with approved murum from excavated materials from foundation 15cm to 20cm layers including watering and compaction complete.
158Item No. 10 - Lowering,layingandj ointingG.I .pipesand specials of following class and diameter including conveyance from stores to site of works, all labour, etc.completeeither undergroundorinvertical position, as directed by Engineer-in-charge.GI 80 mm dia Class- B
159Item No. 11 - Item No. 17 - Lowering, laying and jointing with P.V.C. pipes and specials of following class and diameter including cost of conveyance from stores to site of works including cost of all labour, material, except cement solvent, rubber ring, giving satisfactory hydraulic testing as per IS code, etc. complete (with cement solvent joint / ring fit joint)160 mm dia 4 Kg/cm2 PVC Pipes
160110 mm dia 4 Kg/cm2 PVC Pipes
16190 mm dia 4 Kg/cm2 PVC Pipes
16275 mm dia 4 Kg/cm2 PVC Pipes
163Item No. 12 - Providing and laying in situ following grades of C.C. of trap/granite/quartzite/ gneiss metal for foundation and bedding including dewatering, form work, compacting and curing finishing etc. complete.PCC 1:2:4 (M-150 ) grade for encasing
164Item No. 13 - Lowering, laying, jointing in positionfollowing CIDF Reflux, butterfly valves and sluice valves including cost of all labors jointing material including nutbolts and giving satisfactory hydraulic testing etc complete ( Rates for all class of valves )Sluice Valve 80 mm dia
165Sluice Valve 100 mm dia
166Sluice Valve 80 mm dia
167Item No. 14 - Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete.
168Item No. 15 Providing and constructing B.B. masonry valve chamber with 15 cm thick 1:3:6 proportion PCC bedding, excluding excavation, B.B. masonry in C.M. 1:5 Proportion precast RCC frame and cover, etc. complete as directed by Engineer-in-charge.
169Item No. 16 - HydraulictestingofG. I.pipelinetospecified pressure including cost of all materials and labour and water for testing for the length upto 1km using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessaryequipments,labouroperationcharges etc. required for testing, The rates under this item shall also include cost of retesting if necessary and reinstating to original postion.GI Pipe 80 mm dia Class- B
170Item No. 17 - Hydraulic testing of PVC pipe line to specified pressure includingcost ofall materialsandlabourandwaterfortestingfor specifiedlengthincludingcutting,placingend capmakingarrangementforfillingsafewater usingreciprocatingtypepumpswhichshould beabletoprovidespecifiedtestpressure gauges and other necessary equipments, labour,operationcharges,etc.requiredfor testing.Therateunderthisitemshallalso includecostofretesting,ifnecessaryand reinstating to original position.160 mm dia 4 Kg/cm2 PVC Pipes
171110 mm dia 4 Kg/cm2 PVC Pipes
17290 mm dia 4 Kg/cm2 PVC Pipes
17375 mm dia 4 Kg/cm2 PVC Pipes
174Item No. 19 - Giving satisfactory hydraulic testing of following C.I. D / F Reflex valves, Butterfly valves and Sluice valves.Sluice Valve 80 mm dia PN 1
175Sluice Valve 80 mm dia PN 1
176Item No. 18 -Providing and fixing board displaying information, such as \"Name of work, Tender cost, Name of Contractor, Work completion and liability period etc\", having rectangular shape of 1.20 m x 0.90 m size made out 18 gauge (1.25 mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border /messages /symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x35 x3 mm frame with properly cross braced M.S.angles of size 35 mm x 35 mm x 3 mm duly painted including Two M.S.angle iron posts of size 65 mmx 65 mmx 6 mm, 3.65 m long painted withal ternate black and white bands of 25 cm width including all fixtures etc. and fixing the boards in1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete.Spec. Number As directed by Engineer in Charge MORTH 801
177Sub Work No. 11 - Trial RunItem No. 1 - Commisioning running and maintaining the scheme to quantites, rated capacity, including manning necessary personnel such as operator, valveman, etc. as per requirements of the scheme and who should also administer chemical dose for a period of 1 month for individual scheme and 3 months for regional scheme, together with training of personnel spared by MJP/ Local Body and handing over the scheme to Local Body after completion of the above period as directed by Engineer-in-charge. Trial Run for Single village 3 Months
178TCL Requirement
179MSEB charges
180Provision for MSEB Charges

AI Tender Summary

OUR REF NO 33304850
AUTHORITY Government Departments
TENDER VALUE 2.16 Crore
LAST DATE 06-08-2022
Authority
Authority Name Rural Development Department
Work Description Under Jal Jeevan Mission Programme Wadgaonpingala Water Supply Scheme Tal. Sinnar Dist.Nashik ( Iind Call )
Basic Detail
Tender No 2022-2023 / JJM / TN-17 /Recall-6-Works
Bidding Type Tender
Location
City sinnar
State Maharashtra
Key Dates
Publish Date 29 Jul 2022
Submission Date 06 Aug 2022
Open Date 08 Aug 2022
Finance
Tender Value 2.16 Crore
Tender Fee 11800
EMD 1.50 Lakhs
Exemption Not Available
Document List
d59770ae-8d83-4647-a721-1d62f8bd001b.html
BOQ_1421243.xls
DraftTenderPaper.pdf
Tendernotice_1.pdf
VadhaonPingala-sinner.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jul 29, 2022
11:30 IST

Tender Published

Tender notice published.

Completed
Aug 06, 2022
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Aug 08, 2022

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

d59770ae-8d83-4647-a721-1d62f8bd001b.html

xls

BOQ_1421243.xls

pdf

DraftTenderPaper.pdf

pdf

Tendernotice_1.pdf

pdf

VadhaonPingala-sinner.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender