Repair Renovation Work For Infrastructure Strengthening For Health And Wellness Centre At Manikpur Sc Under Englishbazar Block, Malda. ( Civil And Electrical )
Tender Value
Ref. Documents
Estimated cost
Bid Submission
06 Aug 2022
0 days left
EMD
26000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
manikpur → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repair Renovation Work For Infrastructure Strengthening For Health And Wellness Centre At Manikpur Sc Under Englishbazar Block, Malda. ( Civil And Electrical )
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 29-Jul-2022 | Date Corrigendum | Date | 16-Aug-2022 |
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. a) Depth of excavation not exceeding 1,500 mm. |
| 2 | Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work).a) With earth obtained from excavation of foundation. |
| 3 | A) Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. |
| 4 | Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches. |
| 5 | Single layer brick flat soling of picked jhama bricks i/c. ramming and dressing bed to proper level and Foundation |
| 6 | Single layer brick flat soling of picked jhama bricks i/c. ramming and dressing bed to proper level and Floor |
| 7 | Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m. as directed. Wall Celing |
| 8 | Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 mIn first floor including roof.(a) upto 150 mm. Thick |
| 9 | Cement concrete with graded Stone Ballast (40mm size) excluding shuttering. (A)[Pakur Variety] |
| 10 | Ordinary cement concrete(mix 1:1.5:3) with graded stone chips ( 20 mm, size ) excluding shuttering and reinforcement, if any, in ground floors.as per relevent IS Codes iii) RajMahala)Tie beam & beam………… |
| 11 | Lintel beam………… |
| 12 | Beam…………. |
| 13 | Column Footing…………. |
| 14 | Column…………. |
| 15 | Slab…………. |
| 16 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups,binders etc. including supply of rods, initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape,placing in proper position and binding with 16 gauge black annealed wire at every inter-section, complete as per drawing and direction.a) SAIL/TATA/RINL |
| 17 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m. using approved stout props and thick hard wood planks of approved thickness with required bracing for concretes slabs, beams, columns, lintels, curved or straight i/c. fitting, fixing and striking out after completion of works ( in all floor ).a) 25 mm to 30 mm thick wooden shuttering as per decision and direction of Engineer-In-Charge. |
| 18 | Brick work with 1st classBricks with cement morter (1:6)(a)In foundation and plinth |
| 19 | (b) In superstructure, ALL floor |
| 20 | 125 mm. thick brick work with 1st class bricks in cement mortar (1:4)i) In ground floor |
| 21 | Applying epoxy based reactive joining agent for joining the old concrete withfresh concrete to be applied within manufacturer\"s specified time as permanufacturers specification. (0.4 Kg / m² of concrete surface). |
| 22 | Extra rate for using water proofing and plasticising admixture @ 0.2% byweight of cement (or at manufacturer\"s specified rate) for concrete of variousgrades. |
| 23 | Logo & Marking |
| 24 | Plaster ( to wall, floor, ceiling etc.) with sand and cement mortar i/c. rounding off or chamfering corners as directed i/c. throating, nosing and drip course where necessary.10 mm thk plaster to ceiling ,chajja with sand cement morter (4:1). |
| 25 | 15 mm thk plaster to inside wall with sand cement morter (6:1). |
| 26 | 20 mm thk plaster to outside wall with sand cement morter (6:1). |
| 27 | Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc. |
| 28 | Supplying, fitting and fixing fibre reinforced polymer (FRP) Composite door frame as per approved section with glass fibre reinforced plastic moulded skins and a special sandwich core, so as to impart monolitaheic composite structure as per approved technology of Department of Science and Technology (DST) to safisfy IS: 4020 door testing performance criteria..(i) 66mm x 90mm |
| 29 | Supplying, fitting & fixing fibre reinforced polymer (FRP) Composite door shutters as per approved design with glass fibre reinforced plastic moulded skins and a special sandwich core, so as to impart monolitaheic composite structure as per approved technology of Department of Science and Technology (DST) to satisfy IS:4020 door testing performance criteria.(i) 32 mm thick |
| 30 | Supplying and laying true to line and level vitrified tiles of approved brand (size not less than 600 mm X 600 mm X 10 mm thick) in floor, skirting etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry back side of tiles using cement @ 2.91Kg./sqM or using polymerised adhesive(6 mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per sqM below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles / epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer\"s specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contrr] Floor & Skirting |
| 31 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. (B) Wall With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. (a) Area of each tile upto 0.09 Sq.m (ii) Other than Coloured decorative including white |
| 32 | Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer\"s specification) including cleaning and smoothning of surface.Two Coats. |
| 33 | Collapsible gate with 40mm x 40mm x 6mm Tee as top and bottom guide rail, 20mm x 10mm x 2mm vertical channels 100mm apart in fully stretched position 20mm x 5mm M.S. flats as collapsible bracings properly rivetted and washered including 38mm steel rollers including locking arrangements, fitted and fixed in position with lugs set in cement concrete and including cutting necessary holes, chasing etc. in walls, floors etc. and making good damages complete.. |
| 34 | (a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs .(a) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr. i) In ground floor |
| 35 | Priming one coat on timber or plaster surface with synthetic oil bound primer of approved quality including smoothening surface by sand papering etc.Window & Door (2 sides) |
| 36 | Painting with best quality synthetic enamel paints of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. the surface, if necessary.A. On timber or Plastered surface…….iv) Two coat …….. |
| 37 | Wood work in Door and Windows frame and fixed complete includind a protective coat of painting at the contact surface of the frame.d) Sal: Local ( Other than Malaysian). Door and Window |
| 38 | Panel shutter of doors and windows as per design (Each panel consisting of single plank without joint) including fitting and fixing in position. 35 mm thick shutter with 19mm thick panel. Sishu. Door and Window |
| 39 | (a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.Window Grill |
| 40 | Painting with best quality synthetic enamel paints of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. the surface, if necessary.(b) On steel or other metal surface : |
| 41 | Supplying buble free float glass of approved make and brand confurming to IS: 2835-1987. 4MM smoke glass. Fanlight |
| 42 | 250mm long M.S Clamp by 40mmx6mm |
| 43 | Iron butt hinge , Size-100mmx50mmx1.25mm |
| 44 | Supplying,fitting & fixing Aluminium D handle 125x10 |
| 45 | Supplying,fitting & fixing Aluminium tower bolt (200x10mm) |
| 46 | Supplying, fitting & fixing Zn-Al alloy (55% Al & 45% Zn)coating of 150 grams per sq. metre (followed by colourcoated on both side) steel sheet work having minimum yield strength of 550 Mpa of trapizoidal profile of approved make(excluding the supporting frame work) fitted and fixed with55 mm & 25 mm self tapping screw, EPDM Washer 16 mm dia & 3 mm th. washer etc. complete with 150 mm end lap and one corrugation minimum side lap. (Payment to be made on area of finished work).(i) In Roof:- a) With 0.5 mm thick sheet. |
| 47 | Iron hasp bolt of approved quality fitted and fixed complete(oxidised) with 16 mm dia rod with centre bolt and round fitting.(c) 300 mm long |
| 48 | Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer\"s specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost ofprimer.In Ground & First floor (Two Coat).Premium 100% Acrylic Emulsion. |
| 49 | Total Sanitary &Plumbing Amount: |
| 50 | Electrical Installation work |
| 51 | Applicable GST @ 12% |
| 52 | Labour wellfare CESS @ 1% |
AI Tender Summary
Tender Timeline
Jul 29, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedAug 06, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 10, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender