Construction And Successful Testing And Commissioning Of 0.12 Mgd Rapid Sand Filtration Plant At Salamabad, Uri ( Cost Includes Pst, Clarifloculator, Flash Mixer, Filter House And Wash Water Disposal Chamber ) Wss Salamabad Jamia Mohalla Constructio, Baramulla-Jammu And Kashmir

TDR : 33299290

Tender Notice
Corrigendum Details
BOQ

Expired

Baramulla , Jammu And Kashmir

Tender Brief : Corrigendum : Construction And Successful Testing And Commissioning Of 0.12 Mgd Rapid Sand Filtration Plant At Salamabad, Uri ( Cost Includes Pst, Clarifloculator, Flash Mixer, Filter House And Wash Water Disposal Chamber ) Wss Salamabad Jamia Mohalla Constructio

Document Fees
₹ 1000 /-

EMD
₹ 207300.0 /-

Tender Value
₹ 1.03 Crore /-

Submission Date
27-08-2022

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !

Sr No	Corrigendum Date	Corrigendum	Type	New Submission Date
1	19-08-2022	EXTENSION	Date	27-08-2022

Name of Work:Construction and successful testing and commissioning of 0.12 MGD Rapid Sand Filtration Plant at Salamabad, Uri (Cost includes PST, Clarifloculator, Flash Mixer, Filter House & Wash Water Disposal Chamber)WSS SalamabadJamia Mohalla

Sl. No.	Item Description
1	Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared.
2	Clearing grass and removal of the rubbish upto a distance of 50 m outside the periphery of the area cleared.
3	Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunk and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.
4	Beyond 30 cm girth upto and including 60 cm girth.
5	Beyond 60 cm girth upto and including 120 cm girth.
6	Beyond 120 cm girth upto and including 240 cm girth.
7	Above 240 cm girth
8	Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. (All kinds of soil)
9	Extra for every additional lift of 1.5 m or part thereof in excavation/banking excavated or stacked material :All kinds of soil :
10	All kinds of soil :
11	Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.
12	All kinds of soil :
13	Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides andramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:
14	1 meter from cutting edge
15	25 meter beyond 1 m from cutting edge
16	50 meter beyond 1 m from cutting edge
17	Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:
18	All kinds of soil :
19	Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like.
20	Close timbering in trenches including strutting, shoring and packing cavities (wherever required) complete. (Measurements to be taken of the face area timbered).
21	Depth exceeding 1.5 m but not exceeding 3 m
22	Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.
23	Extra for levelling & neatly dressing of disposed soil completely as directed by Engineer-in-charge.
24	Excavating, supplying and filling of local earth (including royalty)by mechanical transport upto a lead of 5 km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.
25	Providing and laying hand packed stone soling 50 mm nominal size including filling, spreading, dressing,ramming, all leads lifts and all carriages complete.
26	Supply and filling of filter media from approved source - Gravel (Graded gravel - size ranging from 2.0mm to 40.00 mm) in filter beds. Including all carriages, complete job
27	Supply and filling of filter media from approved source - Sand (Coarse filter sand - in filter beds. Including all carriages, complete job
28	Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m in -All kinds of soil.
29	Supplying and filling in plinth with fine sand under floors including, watering, ramming, consolidating and dressing complete.
30	Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:
31	1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size)
32	1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)
33	1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)
34	Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level
35	1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
36	Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement.
37	1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
38	Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with:
39	1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
40	Providing and laying upto floor v level reinforced cement concrete in kerbs, steps and the like including curing but excluding the cost of centering, shuttering, finishing and reinforcement with:
41	1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
42	Reinforced cement concrete work in arches, arch ribs, domes, vaults shells, folded plate and roofs having slope more than 15° upto floor five level level including curing but excluding the cost of centering, shuttering finishing and reinforcement with:
43	1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size
44	Reinforced cement concrete work in chimneys, shafts upto floor five level including curing complete but excluding the cost of centering, shuttering, finishing and reinforcement with:
45	1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
46	Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-incharge. Note: - Cement in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is content considered payable or recoverable separately.
47	All works upto plinth level
48	All works above plinth level upto floor V level
49	Extra for providing richer mixes at all floor levels. Note:- Excess/ less cement over the specified cement content used is payable/ recoverable separately.5.35.1 Providing M-30 grade concrete instead of M-25 grade BMC/RMC. (Note:- Cement content considered in M-30 is @ 340 kg/cum)
50	Extra for R.C.C./B.M.C./R.M.C. work above floor V level for each four floors or part thereof.
51	Add or deduct for using more or less cement in the items of design mix over and above the specified cement content therein.
52	Centering and shuttering including strutting, propping etc. and removal of form for:
53	Foundations, footings, bases of columns etc. for mass concrete.
54	Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.
55	Suspended floors, roofs, landings, balconies and access platforms.
56	Lintel, beams, plinth beams, girders, bressumers and cantilevers.
57	Columns, pillars, piers, abutments, posts and struts.
58	Stairs (excluding landings) except spiral staircases.
59	Spiral staircases (including landings)
60	Arches, domes, vaults upto 6 m span
61	Extra for arches, domes, vaults exceeding 6 m span
62	Chimney and shafts
63	Extra for shuttering in circular work (20% of respective centering and Shuttering items)
64	Edges of slabs and breaks in floors and walls
65	Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc. including cost of de-shuttering and de-centering at all levels, over a height of 3.5 m, for every additional height of 1 meter or part thereof (Plan area to be measured).
66	Suspended floors, roofs, landings, beams and balconies (plan area to be measured)
67	Providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification. (1 kg of water proofing material in 50 kg of cement)
68	Steel reinforcement for R.C.C. work ready to use \"cut and bend\" rebars of approved make from factory/workshop to construction site including placing in position and binding allcomplete upto plinth level.
69	Thermo-Mechanically Treated bars of grade Fe-500D or more.
70	Steel reinforcement for R.C.C. work ready to use \"cut and bend\" rebars of approved make from factory/workshop to construction site including placing in position and binding allcomplete above plinth level.
71	Thermo-Mechanically Treated bars of grade Fe-500D or more.
72	Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :
73	Cement mortar 1:4 ( 1 cement : 4 coarse sand)
74	Cement mortar 1:6 ( 1 cement : 6 coarse sand)
75	Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level
76	Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fastenersshall be paid for separately):
77	First class kail wood
78	Pre-laminated particle board with decorative lamination on both sides,Grade I, Type II IS : 12823 marked
79	Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge.
80	First class kail wood (30 mm thick shutter)
81	Second kail wood(30 mm thick shutter)
82	Providing and fixing fly proof wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions all complete.
83	With Galvanized M.S. Wire gauge with wire of dia 0.63 mm
84	With 2nd class teak wood beading 62x19 mm
85	4 mm thick glass pane (weighing not less than 10 kg/sqm)
86	Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.
87	Using M.S. angles 40x40x6mm for diagonal braces.
88	Using flats 30x6mm for diagonal braces and central cross piece.
89	Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. chequered plate wherever required, all complete.
90	In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required.
91	In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
92	Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer.
93	M.S. tube
94	E.R.W. tubes
95	G.I. pipes
96	Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
97	Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
98	Riveted and bolted
99	Welded
100	Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength confirming to IS:4454 part-1 and M.S. top cover of required thickness for rolling shutters
101	80x1.25 mm M.S. laths with 1.25 mm thick top cover
102	Providing and fixing ball bearing for rolling shutters.
103	Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.
104	40mm thick with 20 mm nominal size stone aggregate.
105	50 mm thick with 20mm nominal size stone aggregate.
106	Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including skirting in vertical & pointing the joints with white cement and matching pigment etc., complete
107	In colour such as White, Ivory, Grey, Fume, Red Brown (as dirrected by the engineer incharge)
108	Flooring with marble stone of specified thickness as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement:4 coarse sand) laid and jointed with grey cement slurry including skirting in vertical, rubbing, polishing and curing complete with:
109	Makrana White Second quality (16mm)
110	Extra for pre finished nosing to treads of steps of marble stone
111	Extra for marble stone flooring in treads of steps and risers using single length up to 2.00 meter.
112	12mm Cement plaster finished with a floating coat of neat cement of mix:
113	1 : 3 ( 1 cement : 3 fine sand)
114	1 : 4 ( 1 cement : 4 fine sand)
115	6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand)
116	CEMENT PLASTER WITH A FLOATING COAT OF NEAT CEMENT 15mm Cement plaster on the rough side of single or half brick wall of mix:
117	1 : 4 ( 1 cement : 4 fine sand)
118	1 : 6 ( 1 cement : 6 fine sand)
119	Pointing on brick work in 1 cement : 3 sand mix. flush/ruled/structure or weathered pointing
120	Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)
121	Applying priming coat:
122	With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)
123	With ready mixed aluminum primer of approved brand and manufacture on resinous wood and ply wood
124	With ready mixed red oxide Zinc Chromate primer of approved brand and manufacture on steel galvanized iron/steel works
125	With ready mixed red oxide Zinc Chromate primer of approved brand and manufacture on steel work (second coat)
126	Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.
127	Two or more coats on new work
128	Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture
129	Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc complete
130	On steel work
131	On concrete work
132	Distempering with dry distemper of approved brand and manufacture (two or more coats) and of required shade on new work, over and including water thinnable priming coat to give an even shade
133	Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer.
134	Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc.complete
135	125 mm
136	100 mm
137	Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :
138	150x10 mm
139	100x10 mm
140	Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
141	0.50 mm thick with zinc coating not less than 275 gram/m2
142	Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete
143	0.80 mm thick with zinc coating not less than 275 gram/m2
144	0.63 mm thick with zinc coating not less than 275 gram/m2
145	0.50 mm thick with zinc coating not less than 275 gram/m2
146	Providing and fixing plained eaves boarding. 2nd class kail wood
147	250x32 mm (nominal size )
148	300x40 mm (nominal size)
149	Providing and fixing of 0.5mm Color GS Sheet Soffitboardingincluding Backing, supports etc complete job
150	Providing and fixing plained eaves boarding. (II Class kail Wood)
151	250x32 mm (nominal size )
152	300x40 mm (nominal size)
153	Providing and fixing of 0.5mm Color GS Sheet Soffitboardingincluding Backing, supports etc complete job
154	Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
155	1 mm thick
156	2 mm thick
157	Providing and fixing G.I. pipes (B medium) complete with G.I. fittings excluding trenching and refilling etc. (external work)
158	15 mm dia. nominal bore
159	20 mm dia. nominal bore
160	25 mm dia. nominal bore
161	32 mm dia. nominal bore
162	40 mm dia. nominal bore
163	50 mm dia. nominal bore
164	65 mm dia. nominal bore
165	80 mm dia. nominal bore
166	100 mm dia. nominal bore
167	150 mm dia. nominal bore
168	Providing and fixing D.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately). Confirming to IS:14846 read with latest amendments.
169	80 mm dia. Class 1
170	100 mm dia. Class 1
171	125 mm dia. Class 1
172	150 mm dia. Class 1
173	200 mm dia. Class 1
174	250 mm dia. Class 1
175	300 mm dia. Class 1
176	350 mm dia. Class 1
177	Providing and laying D.I. standard specials such as tees, bends, collars, tapers, caps etc. suitable for flanged jointing as per IS : 9523 (as per site requirement)
178	Up to 300 mm dia.
179	Over 300 mm dia.
180	Providing and fixing of MS flanged joints (12mm thick) to double flanged GI/DI pipes including cutting of pipes, welding charges, cutting of flanges, rubber gasket, bolts, nuts including testing of joint and all sorts of carriages. Complete Job.
181	80 mm dia. pipe
182	100 mm dia. pipe
183	125 mm dia. pipe
184	150 mm dia. pipe
185	200 mm dia. pipe
186	250 mm dia. pipe
187	300 mm dia. pipe
188	350 mm dia. Pipe
189	Providing and Placing in position suitable PVC water stops conforming to IS : 12200 for construction / expansion joints between two RCC members and fixed to the reinforcement with binding wire before pouring concrete etc. complete.
190	Serrated with central bulb (225 mm wide, 8-11mm thick)
191	Dumb bell with central bulb (180mm wide, 8mm thick)
192	Kickers (320mm wide, 5mm thick)
193	Providing and applying of swellable type water stop tape, 19mm x 25mm thick in linear meter (expansive nature) for construction joints treatment of RCC structure such as raft slab, retaining walls, water storage tank and at the junctions of raft slab with the retaining walls etc.. After cleaning the surface, one coat of required primer for swellable water stop tape shall be applied throughout the length of the joint @3.78 litre per 240 running meter. Over the primed surface swellable type water stop tape shall be placed. The work shall be carried out all complete as per specification and the direction of the Engineer-In-Charge. The product performance shall carry guarantee for 10 years against any leakage
194	Providing & fixing of 0.63mm thick PGI sheets at construction joints including all leads and lifts complete job as directed by Engineer-in-charge
195	Providing and fixing aluminum work for doors, windows, ventilators andpartitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 andIS: 1285, fixed with dash fastener of required dia. and size includingnecessary filling up of gaps at junctions i.e, at top, bottom and sides withrequired EPDM rubber / neoprene gasket felt etc. Aluminum sectionsshall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading forglazing / panelling, C.P. brass / stainless steel screws, all complete as perarchitectural drawings and the directions of Engineer-in-Charge (glazing,panelling and dash fasteners to be paid for separately.)
196	Anodized aluminum (Anodized transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15)
197	Powder coated aluminum (minimum thickness of powder coated 50 microns)
198	Polyester powder coated aluminum (minimum thickness ofpolyester powder coated 50 microns)
199	For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately.)
200	Anodized aluminum (Anodized transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15)
201	Powder coated aluminum (minimum thickness of powder coated 50 microns)
202	Polyester powder coated aluminum (minimum thickness of polyester powder coated 50 microns)
203	Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin-charge. (Cost of aluminum snap beading shall be paid in basic item.)
204	With floating glass panes of 4.0 mm thickness (weight not less than 10.00 kg / sqm)
205	With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm)
206	With float glass panes of 8 mm thickness (weight not less than 20.0 kg / sqm)
207	Providing & fixing of PVC under drainage laterals with specifications conforming to IS-4985 & IS-15801, 8mm thick fabricated out of approved make with nominal dia of 9mm perforations as per design of bed provided at 60 degrees along with PVC Tees and end caps grouted in concrete, the pressure rating of 10kg/sq cm
208	50 mm dia
209	62.5 mm dia
210	75 mm dia
211	100 mm dia
212	Carriage of materials by mechanical transport including loading, unloading, stacking of materials - SAND:
213	3 km
214	4 km
215	5 Km
216	Beyond 5 km upto 10 km per km
217	Beyond 10 km upto 20 km per km
218	Beyond 20 km per additional km
219	Carriage of materials by mechanical transport including loading, unloading, stacking of materials - Aggregate below 40mm :
220	3 km
221	4 km
222	5 km
223	Beyond 5 km upto 10 km per km
224	Beyond 10 km upto 20 km per km
225	Beyond 20 km per additional km
226	Carriage of materials by mechanical transport including loading, unloading, stacking of materials - Aggregate 40mm and above :
227	3 km
228	4 km
229	5 Km
230	Beyond 5 km upto 10 km per km
231	Beyond 10 km upto 20 km per km
232	Beyond 20 km per additional km
233	Carriage of materials by mechanical transport including loading, unloading, stacking of materials - Stone Soling :
234	3 km
235	4 km
236	5 Km
237	Beyond 5 km upto 10 km per km
238	Beyond 10 km upto 20 km per km
239	Beyond 20 km per additional km
240	Carriage of materials by mechanical transport including loading, unloading, stacking of materials - Steel/ CGI Sheets:
241	3 km
242	4 km
243	5 Km
244	Beyond 5 km upto 10 km per km
245	Beyond 10 km upto 20 km per km
246	Beyond 20 km per additional km
247	Carriage of materials by mechanical transport including loading, unloading, stacking of materials - Earth:
248	3 km
249	4 km
250	5 Km
251	Beyond 5 km upto 10 km per km
252	Beyond 10 km upto 20 km per km
253	Beyond 20 km per additional km
254	Carriage of materials by mechanical transport including loading, unloading, stacking of materials - Cement:
255	3 km
256	4 km
257	5 Km
258	Beyond 5 km upto 10 km per km
259	Beyond 10 km upto 20 km per km
260	Beyond 20 km per additional km
261	Carriage of materials by mechanical transport including loading, unloading, stacking of materials - Bricks:
262	3 km
263	4 km
264	5 Km
265	Beyond 5 km upto 10 km per km
266	Beyond 10 km upto 20 km per km
267	Beyond 20 km per additional km
268	Carriage of materials by mechanical transport including loading, unloading, stacking of materials - wood:
269	3 km
270	4 km
271	5 Km
272	Beyond 5 km upto 10 km per km
273	Beyond 10 km upto 20 km per km
274	Beyond 20 km per additional km
275	Carriage of materials by manual means including loading, unloading, stacking of materials- (Sand)
276	Ist 50m
277	Beyond Ist 50m
278	Carriage of materials by manual means including loading, unloading, stacking of materials- Aggregate Below 40mm
279	Ist 50m
280	Beyond Ist 50m
281	Carriage of materials by manual means including loading, unloading, stacking of materials- Aggregate 40mm and Above
282	Ist 50m
283	Beyond Ist 50m
284	Carriage of materials by manual means including loading, unloading, stacking of materials- Stone Soling
285	Ist 50m
286	Beyond Ist 50m
287	Carriage of materials by manual means including loading, unloading, stacking of materials- Steel/CGI Sheets
288	Ist 50m
289	Beyond Ist 50m
290	Carriage of materials by manual means including loading, unloading, stacking of materials- Earth
291	Ist 50m
292	Beyond Ist 50m
293	Carriage of materials by manual means including loading, unloading, stacking of materials- Cement
294	Ist 50m
295	Beyond Ist 50m
296	Carriage of materials by manual means including loading, unloading, stacking of materials- Bricks
297	Ist 50m
298	Beyond Ist 50m
299	Carriage of materials by manual means including loading, unloading, stacking of materials- wood
300	Ist 50m
301	Beyond Ist 50m
302	Electrical Items:Supplying and fixing of 25mm dia. medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
303	Providing and carrying out wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (excl. cost of conduit)
304	Providing and carrying out wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2-way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (excl cost of conduit)
305	Providing and carrying out wiring for heating points with 4.0 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, modular combinedS&S 16Amp along with modular plate, suitable GI box and earthing the point with 2 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (excl cost of conduit)
306	Providing and carrying out circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. (excl. cost of conduit)
307	2 x 2.5 sq. mm + 1 x 2.5 sq. mm earth wire
308	2 x 4 sq. mm + 1 x 4 sq. mm earth wire
309	Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6A & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.
310	Supply and fixing of two module stepped type Electronic Fan regulator on the existing modular plate switch box including connections but excl cost modular plate etc., as required.
311	Supplying and fixing single pole 5 A to 32 A rating, 240V, 10 kA, \"C\" curve, miniature circuit breaker suitable for inductive load in the MCB DB complete with connections, testing and commissioning etc. as required.
312	Supplying and fixing double pole 63 Amp 240V, 10 kA, \"C\" curve, miniature circuit breaker suitable for inductive load in MCB DB complete with connections, testing and commissioning etc. as required.
313	Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required
314	Supply of 24-Watt LED slim aluminum panel surface type complete in all respects.
315	Supply of 1200 mm sweep Ceiling Fans complete in all respects. Confirming to relevant Indian Standards
316	Supply of 200 mm nominal sweep Exhaust Fans including shutter from outside complete.Confirming to relevant Indian Standards
317	Installation, testing and commissioning of pre-wired, fluorescent fitting/ compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
318	Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (up to 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.
319	Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.
320	Supplying and fixing 12-way double door, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
321	Providing, fitting and testing of LED flood light IP65 30W rating to pre-wired electric points on the outside of the Filter House building.
322	Providing and laying of armoured cable 95mm, 3.5 core for main service line of reputed make in P.V.C pipes of required dia to accommodate the service line including bends etc., from main transformer to the main panel board including copper thimbles, earth work excavation and filling for laying of cable complete.
323	Providing and fitting at site 3-phase, Voltage stabilizer of following ratings, oil emersed, of standard make and quality including accessories as required. The job includes making of connections with main panel board and service line. To be paid in fitted and finished form after testing on full load capacity, complete job.
324	10 KVA
325	20 KVA
326	25 KVA
327	30 KVA
328	40 KVA
329	50 KVA
330	Providing and fitting of panel board with angle iron supports and A.C. sheets for fixing of MCCB, change over switch, bus bars etc. The job includes nuts bolts and embedding of supports in cement concrete blocks complete job.
331	Providing and fitting of:
332	200 Amp. 4 pole Change over of reputed make
333	100 Amp 4 pole change over of reputed make.
334	64 Amp. 4 pole Change over of reputed make
335	32 Amp. 4 pole Change over of reputed make
336	200 Amp 3-phase copper bus bar
337	100 Amp-Copper bus bar
338	64 Amp-Copper bus bar
339	32 Amp-Copper bus bar
340	100 Amp MCCB
341	63 Amp MCCB
342	40 Amp MCCB
343	16 Amp MCCB
344	6 Amp MCCB
345	3-phase indicator points
346	3-phase voltmeter and Amperemeters
347	Providing and fitting of Fancy wall brackets and doom light of reputed make.
348	Mechanical Items:Providing & fixing of PVC under drainage laterals with specifications conforming to IS-4985 & IS-15801, 8mm thick fabricated out of approved make with nominal dia of 9mm perforations as per design of bed provided at 60 degrees along with PVC Tees and end caps grouted in concrete, the pressure rating of 10kg/sq cm
349	50 mm dia
350	62.5 mm dia
351	75 mm dia
352	100 mm dia
353	Providing, fitting, testing and commissioning of following items for Flash Mixer:
354	Mixing device with reduction gear system
355	3-phase Electrically driven motor:
356	0.5 HP
357	0.75 HP
358	1.0 HP
359	Foundation \ Base plate
360	Starter along with necessary wiring upto motor
361	Providing, fitting, testing and commissioning of following itemn for Alum Dosing Unit-
362	Mixing device with reduction gear system.
363	3-phase electrically driven motors:
364	0.5 HP
365	0.75 HP
366	1.0 HP
367	Foundation / Base plate
368	Starter along with necessary wiring upto motor
369	P.V.C outlet, overflow system with fittings upto point of application
370	150mmdiadrain out let
371	50 mm dia Service water piping.
372	Constant dozing unit with time device
373	Manually operated hoist
374	Providing, fitting, testing and commissioning of following itemns forChlorine Dosing Unit-
375	Mixing device with reduction gear system.
376	3-phase electrically driven motors:
377	0.5 HP
378	0.75 HP
379	1.0 HP
380	Foundation / Base plate.
381	P.V.C outlet, overflow system with fittings upto point of application.
382	Starter along with necessary wiring upto motor
383	150 mm dia Drain out let
384	50mm dia service water piping
385	Constant dozing unit with time device.
386	Providing and fixing D.I. sluice valves Class 1 (with cap) complete with rubber insertions, bolts, nuts, extention rod, joint connector, supporting pedestal with base plate, top plate and necessary anchoring boltsetc. (the tail pieces if required will be paid separately). Confirming to IS:14846 read with latest amendments.
387	80 mm dia.
388	100 mm dia.
389	125 mm dia.
390	150 mm dia.
391	200 mm dia.
392	250 mm dia.
393	300 mm dia.
394	350 mm dia.
395	Air Scouring Arrangements
396	Providing fitting, testing and comissioning ofair blower standard make ISI mark capable of providing compression @ 0.35 kgs/sqcm coupled with suitable 3 phase induction electric motorcomplete with auxiliary pipe system upto filter beds with pressure guage, Nozzles, foundation block, base plate, air check valve , non- return valve, Starter etc
397	2.10 KLPM Air blower with 2.0 HP Motor.
398	4.2 KLPM Air blower with 5.0 HP Motor.
399	8.2 KLPM Air blower with 7.5 HP Motor.
400	10.6 KLPM Air blower with 10.0 HP Motor.
401	12.3 KLPM Air blower with 12.50 HP Motor.
402	16.80 KLPM Air blower with 15.0 HP Motor.
403	Up Wash Arrangements
404	Supply installation and successful testing and commissioning of mono block pumping unit standard make ISI mark coupled with 2 phase induction motor with appropriate pumping capacity so as to fill the tank within the max. of 2 hours with nominal dynamic head of 25m along with all accessories like foot valves, non- return valves, foundation block, base plate, suction pipe, suitable rising main with nominal dia 50mm (class-B)with heavey dutyvalves and other accessories required for the job.
405	Pumping unit with 5.0 HP Motor.
406	Pumping unit with 7.5 HP Motor.
407	Pumping unit with 12.5 HP Motor.
408	Pumping unit with 15.0 HP Motor.
409	P/F testing and commissioning of MS Rotating Desludging Bridge comprising of following items:
410	Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete for the Installation Testing and Commissioning of Half Bridge with Central Drive mechanism, scrapper and churners for required dia Clarifer.
411	Riveted and bolted
412	Welded
413	Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc complete
414	On steel work
415	On concrete work
416	Central axle turn table with double bearing and guide for incoming cable.
417	Peripheral drive assembly with following motors, gear box, rollers, drive trolly (60:1 reduction gear box).
418	Pumping unit with 2.0 HP Motor.
419	Pumping unit with 5.0 HP Motor.
420	Pumping unit with 7.5 HP Motor.
421	Starter along with necessary wiring upto motor
422	Flocculator drive assembly with crown wheel, pinion sets, reduction gear (40:1) with motors complete job.
423	0.5 HP
424	0.75 HP
425	1.0 HP
426	Incoming cable, telescopic electric pole with rotary current collector
427	Providing and laying/fixing S&S Centrifugally Cast (Spun)/ Ductile Iron Pipes Class K-7 conforming to IS : 8328
428	100 mm dia
429	150 mm dia
430	200 mm dia
431	250 mm dia
432	300 mm dia
433	350 mm dia
434	400 mm dia
435	450 mm dia
436	Providing and laying D.I. standard specials such as tees, bends, collars, tapers, caps etc. suitable for flanged jointing as per IS : 9523 (as per site requirement)
437	Up to 300 mm dia.
438	Over 300 mm dia.
439	Providing/ Fixing, installation, successful commissioning of double flanged MS pipes/specials to be fabricated from MS tube heavy quality nominal thickness 6mm, conforming to relevant Indian Standard IS-1239 and/or IS 1161 read with up to date amendments. The pipe material should be of standard quality and must withstand all the anticipated design pressure ratings.The work should be leakproof and should be painted with anti corrosive red oxide primer. Complete Job.

Also Visit

Tenders

Jammu And Kashmir Tenders

Construction Tenders

Water Purification Tenders

Water Treatment Plant Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Construction And Successful Testing And Commissioning Of 0.12 Mgd Rapid Sand Filtration Plant At Salamabad, Uri ( Cost Includes Pst, Clarifloculator, Flash Mixer, Filter House And Wash Water Disposal Chamber ) Wss Salamabad Jamia Mohalla Constructio, Baramulla-Jammu And Kashmir

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Construction And Successful Testing And Commissioning Of 0.12 Mgd Rapid Sand Filtration Plant At Salamabad, Uri ( Cost Includes Pst, Clarifloculator, Flash Mixer, Filter House And Wash Water Disposal Chamber ) Wss Salamabad Jamia Mohalla Constructio, Baramulla-Jammu And Kashmir

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us