Various Works As Per Tender Supply And Installation Of Highmasts Various Type Of Lighting Fixtures Distribution Boards Cabling Works Prefabricated Gi Ladder Type Cable Tray And Tray Cover Works Along With Associated Civil Works => Limited
Tender Value
4.98 Crore
Estimated cost
Bid Submission
08 Aug 2022
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mumbai Suburban → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Various Works As Per Tender Supply And Installation Of Highmasts Various Type Of Lighting Fixtures Distribution Boards Cabling Works Prefabricated Gi Ladder Type Cable Tray And Tray Cover Works Along With Associated Civil Works => Limited
BOQ
| Sl. No. | Item Description |
| 1 | Civil WORKS |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5m in widthas well as 10 sqm on plan) including taking out and disposal of excavated earth within or outside site to unobjectionable place and lift upto 1.5m, as directed by Engineer-in-charge. |
| 3 | i) All kinds of Soil |
| 4 | Extra for every additional lift of 1.5m or part thereof in excavation or banking excavated or stacked materials in all kinds of soil |
| 5 | Excavating trenches of required width for pipes, cables etc including excavation for sockets & dressing of sides, ramming of bottoms,depth upto 1.5m including taking out excavated soil & then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing surplus excavated soil as directed, within or outside site at unobjectionable place in all kinds of soil |
| 6 | iv) Pipes, Cable etc. > 80mm < 300m dia |
| 7 | v) For extra depth of >1.5m < 3mfor dia 80 to 300mm |
| 8 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, within premises and lift upto 1.5m |
| 9 | Supplying and filling in plinth with sand within specified grading zone of fine aggregates specified in table 3.1, clause 3.1.3 of attached specifications under floors, etc. in layers not exceeding 20cm in depth, each deposited layer to be compacted by ramming including watering, consolidating and dressing complete. |
| 10 | iii) Manufactured Sand within grading zone IV |
| 11 | Providing and laying in position cement concrete of specified grade excluding cost of centering & shuttering. All work up to plinth level: |
| 12 | v) 1:3:6(1 Cement : 3 Coarse Sand : 6 Graded stone aggregate of 20mm) |
| 13 | viii) 1:4:8(1 Cement :4 Coarse Sand :8 Graded stone aggregate of 40mm) |
| 14 | Providing and laying in position ready mixed M-30 gradeconcrete for reinforced cement concrete work using cement content as per approved design mix manufactured in fully automatic batching plant & transported to site of workin transit mixer for all leads having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying, excluding the cost of centering, shuttering, finishing & reinforcement including cost of admixtures in recommended proportions as per IS:9109 to accelerate/ retard setting of concrete, improve workability without impairing strength & durability as per direction of Engineer-in-charge (Note :- Cement content considered in this item is @ 330 kg/cum. Less cement used as per design mix (if any) will be recoverable separately. No extra payment against extra cement if used shall be payable. |
| 15 | i) M30 RMC for All works UP TO PLINTH LEVEL |
| 16 | ii) M30 RMC for All works ABOVE PLINTH UPTO FLOOR 5 LEVEL |
| 17 | Centering and shuttering including strutting, propping etc. and removal of form for : |
| 18 | i) Foundations,footings,bases of columns, etc. for mass concrete |
| 19 | iv) Lintels, beams plinth beams,girders bressumers and cantilevers |
| 20 | v) Columns, Pillars, Piers, Abutments, Posts and Struts. |
| 21 | Supply of Steel reinforcement for R.C.C. including straightening, cutting, bending, placing in position and binding all complete at all levels |
| 22 | ii) Thermo Mechanically Treated Bars of Fe- 500D grade or more, conforming to IS1786 |
| 23 | Providing and laying Brick work with common burnt clay F.P.S (non Modular) bricks of class designation 5.0 |
| 24 | xiii) Brick work with class designation 5.0 bricks in cement mortar 1:4 (1 cement : 4 coarse sand)IN FOUNDATION AND PLINTH |
| 25 | xiv)Brick work with class designation 5.0 bricks in cement mortar 1:4 (1 cement : 4 coarse sand) in superstructureABOVE PLINTH AND UP TO FLOOR V LEVEL |
| 26 | Steel work in built up tubular (round,square or rectangular hollow tubes etc) trusses etc. including cutting,hoisting fixing in position and applying a priming coat of approved steel primer, including welded and bolted with special shaped washers etc. complete. |
| 27 | i) Hot finished welded type tubes |
| 28 | Structural steel work in built up sections/ framed work in gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cutting,hoisting,fixing in position & applying a priming coat of approved steel primer etc. as required. |
| 29 | Providing and laying cement plaster on surfaces with fine sand including curing etc. |
| 30 | ii)12 mm cement plaster of mix 1:6 (1 cement: 6 fine sand) |
| 31 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade with two or more coats over an under coat of suitable shade with ordinary paint of approved brand and manufacture. |
| 32 | Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : Light Duty |
| 33 | iv) 300 mm dia. R.C.C. pipe |
| 34 | CABLE BRICK DUCT Providing & constructing underground brick duct 650mm below GL for laying of 3 cables of max. diameter 70mm, complete with supply and laying of sand, bricks & including Excavation and backfilling in all kind of soils |
| 35 | i) 450 mm (24 Bricks & 0.0494 cum per Mtr) |
| 36 | ii) 225 mm (16 Bricks & 0.0195 cum per Mtr) |
| 37 | Providingand laying class-B 50mm dia GI pipe for cable routing under flooring/ EB post leading including sealing both ends with jute and Bitumen |
| 38 | Supply & drawing/laying, jointing, connecting, testing and commissioning ofearth strip/copper strip/GI wire for earthing and lightning protection under or aboveground complete as per specification for the following : |
| 39 | iii) 50 x 6 mm G.I. Strip |
| 40 | ii) 32 x 6 mm G.I.strip |
| 41 | Supply & Installation of Octagonal Pole, Installation of IOCL Supplied Octagonal Poles, Supply & Installation of 100 W Yard Lights & other allied works : |
| 42 | ii) S/E of 9 Meter high galvanised Octagonal pole with top 90mm(A/F),bottom 158mm (A/F), made up of 3mm thick plate having a baseplate of size 285 x 285 x 16 with Decorative Single Arm 1500mm long bracket arm made up of 48 O.D. pipe with EN grade galvanised foundation bolts & anchor plate on suitable concrete foundation as per standard drawings enclosed herein (Civil & Electrical works shall be paid separately) having fixing arrangement for mounting 2 Nos. Of 250W Metal halide luminaries (on opposite sides) |
| 43 | i) Erection, Installation and commissioning of company supplied yard light poles including grouting in C.C. & painting, internal wiring, etc complete as per direction of Engineer In-charge (Civil job is included but painting shall be paid separately). |
| 44 | Supply and fixing of 100 W LED (Light Emitting Diode) light fixture with fittings and accessories for Yard lighting purpose having IP66 protection class with Pressure Die Cast LM6/ADC12/LM24 housing and with toughened glass or UV stabilized polycarbonate cover type of approved make or equivalent as per direction of Engineer-in-charge. The LED driver shall have an in-built high voltage cutoff >= 290 V with power factor of complete fitting greater than 0.90. CCT (Correlated Colour temperature) shall be in the range of 5665 K +/- 355 K as per ANSI standard C78.377, CRI (Colour rendering index) should include all colour range from R1 to R15 and > 70 for outdoor luminaire. LED efficacy shall be greater than 140 lumens/watt @ 350mA drive current. The minimum system lumen efficacy of the luminaire shall be 100 Lumens per Watt. The Surge Protection Device (SPD) should be series type with fail safe, surge protection for minimum 3kV shall be provided. Supply of complete fitting with all accessories as per specification attached and as per direction of engineer in charge. Each lot of fittings shall accompany test certificates LM79/ IS:16106 and reference/ batch nos of LEDs and fittings for verification at site. The supply of LED lighting shall be covered by a warranty of minimum 60 months from the date of supply of the lighting and the LED light fitting shall be complete in all respects including LED, LED Driver, Electronic circuitory, Luminaire etc. |
| 45 | Electrical Works-Supply of Following Items - GST @ 18% Items |
| 46 | Supply of LSDB (Flame and Non flame proof) |
| 47 | Flame Proof 32A, 415V, 3Ph & N, 50HZ sheet steel enclosure flush / surface mounting lighting sub distribuition board (LSDB ( Ex\"d\") for lighting load of the following incoming and outgoingand outgoing feedersi) 1no.- Incomer 32A, TPN MCB ii) 6nos.- O/G 16A, DP RCBO (100mA) |
| 48 | Weather Proof ( Non Flame proof ) 32A, 415V, 3Ph & N, 50HZ sheet steel enclosure flush / surface mounting lighting sub distribuition board for lighting load of the following incoming and outgoingand outgoing feedersi) 1no.- Incomer 32A, TPN MCB ii) 6nos.- O/G 16A, DP RCBO (100mA) |
| 49 | Supply of Ex\"d\" EXHAUST FAN |
| 50 | 300 mm dia., heavy duty Flame proof Ex\"d\" exhaust fan complete with motor, cable gland, shutter, louver, bird catcher, mounting bracket, hardware etc. and conforming to IS, heavy dutytype suitable for 240V, single phase AC supply. |
| 51 | Supply of GROUND AND PLAT FORM MOUNTED LIGHTING POLE |
| 52 | 2.5 mtr height( Structure mounted type) Swan neck GI Lighting pole (50mm as per IS 1239 - Medium duty ; Galvanisation of 610 Gms/sqm) for structural mounting , complete with all clamping arrangements for cables including accessories , flameproof proof JBs at the foot of the pole & termination block (as applicable), zincpassivated hardware for fixtures support & pole support , clamps, nuts, bolts, etc. including supply of commissioning spares , as required.(For manifold area ) |
| 53 | Supply of HIGH MAST LIGHTING TOWERS |
| 54 | 30 Mtr. height High Mastcomplete with accessories. The cost also includes supplying and providing trailing cable ( 5C x 10 Sq. mm. Cu cable) fromSwitch Plug & Socket at the foot of high mast to the junction box at the top FLP Motor, suitable size double compression, cable glands.Note:a) Rate forcivil works required for high mast foundations shall be paid separately as mentioned elsewhere. b) Lightning arrestor & aviation obstruction lamp shall also be provided as a part of supply of high mast. c) Tenderers should note thatjunction box shall be provided at the top of the high mast as per specifications.Rates for lighting fixtures shall be paid separately. e) High mast lantern Carraige shall be designed for mounting 24 Nos Luminiares( 400 W LED) , PHILIPSmake OR Equivalent. |
| 55 | Design, supply of flameproof type Feeder Pillar Box for the operation of the 30M High Mast, Motor, Reversible Starter and other accessories. |
| 56 | Supply of LT AND LIGHTING CABLESSupply of 1.1 KV Grade XLPE,Armoured, FRLSpower cable per specificationno. PC159-AT-TS8160 |
| 57 | 3.5Cx70 sq. mm (Al) |
| 58 | 3.5Cx25 sq. mm (Al) |
| 59 | 3Cx2.5 sq. mm (Cu) |
| 60 | EARTHINGSupply of following Hot dip Galvanized earthing and lightning protection materials conforming to IS & drg. specifications.(Galvanisation is 910 gms/sq. mtr.) |
| 61 | Earth Pit: Supply ofhot dip GI earth electrode 3.8 m long 100 dia NB heavy duty as per IS 1239 complete with all parts including required S.S. hardware for earth pit (equipment earthing, Neutral earthing and for lightning protection) and required test link for checking earth connectivity.as per enclosed Drawing No. PDS :E 610& Earthing GI accessories as per Drawing No. PDS:E 611(2 Sheets). Earth electrodes shall be hot dip galvanised after drilling / welding. |
| 62 | Supply of 1Cx2.5 sq.mm (Cu) flexible wire , strandard(GREEN) for Lighting fixture EXTERNAL earthing at single point for area PPH, FPH, Parking area , MS and HSD tank area |
| 63 | Supply of Hot dip galvanized GI earth bus bar of size 390 x 50 x 12 thick with fixing materials as per Drg. No.- PDS:E 615 (10 holes) |
| 64 | Electrical Works-Supply of LED Lights & Lighting Fixtures @ GST 12% |
| 65 | LIGHTING FIXTURES & ACCESSORIES Flame Proof & Weather proofLED Lighting Fixtures & Accessories (All Lighting fixtures shall be provided with required no. of double compression nickle plated brass cable glands and stopping plug.) |
| 66 | 150 W LED Flame proofflood lighting fixture with integral Control gear box,FLP Double compression Ni plated brass cable gland ,lugs etc complete suitable for mounting to above lighting pole. |
| 67 | 240V Volt AC, 100 W WELL GLASS FLAMEPROOF Ex\"d \" LED lighting fixtures (LM-6) with integral control gear box, lamp , FLP Double compression Ni plated brass cable glands ,Lugs and all other accessoriesas.(For mani fold area ) |
| 68 | 240 Volt AC, 100 W WELL GLASS Weatherproof LEDlighting fixtures (LM-6) with integral control gear box,lamp WP Double compression Ni plated brass cable glands ,Lugs and all other accessories. (For mani fold area ) |
| 69 | 240 Volt AC, 72W Well glass Flameproof Ex\"d\" LEDlighting fixtures (LM-6) with integral control gear box,lamp ,FLP Double compression Ni plated brass cable glands ,Lugs and all other accessories. |
| 70 | FLP 2 x 20 W LED, Industrial type, lighting fixtures with LED lamp and FLP glands for Loop in Loop out with all other accessories , Baliga make model no. EXFLO 240 or equivalent approved make |
| 71 | Specially designedflood light luminaries 400W LED lamps on High Masts.The cost shall include supply and providing 3C x 2.5 mm² unarmoured copper cable from the junction box at the top of mast to each lighting fixtures including terminations with suitable glands, Lugs etc all complete. |
| 72 | Approved /reputed make single dome aviation obstruction light with 2 x 15 W LED ultra bight ( RED)colour lamp , anintegral control gear ,double compression stainless stell cable glands and mounting accessories shall be provided - Single dome aviation obstruction light. |
| 73 | Electrical Works-Installation of Following Items |
| 74 | Installation of LSDB (Flame and Non flame proof) |
| 75 | Flame Proof 32A, 415V, 3Ph & N, 50HZ sheet steel enclosure flush / surface mounting lighting sub distribuition board (LSDB ( Ex\"d\") for lighting load of the following incoming and outgoingand outgoing feeders ( Product pump house manifold and HSD tank area)i) 1no.- Incomer 32A, TPN MCBii) 6nos.- O/G 16A, DP RCBO (100mA) |
| 76 | Weather Proof ( Non Flame proof ) 32A, 415V, 3Ph & N, 50HZ sheet steel enclosure flush / surface mounting lighting sub distribuition board for lighting load of the following incoming and outgoingand outgoing feeders ( Fire water pump house manifold and truck tank parking area )i) 1no.- Incomer 32A, TPN MCB ii) 6nos.- O/G 16A, DP RCBO (100mA) |
| 77 | Ex\"d\" EXHAUST FAN |
| 78 | 300 mm dia., heavy duty Flame proof exhaust fan complete with motor, cable gland, shutter, louver, bird catcher, mounting bracket, hardware etc.including glanding and terminaton of cables complete. |
| 79 | LIGHTING FIXTURESFlame Proof & Weather proofLED Lighting Fixtures & Accessories(All Lighting fixtures shall be provided with required no. of double compression nickle plated brass cable glands and stopping plug.)Receiving from store, transporting to erection site including handling, arrangement of transport vehicle, unpacking, inspection, checking of internal wiring, fixing copper conductor, cabling / circuit wiringwith 3x2.5 sq. mm (cu ) cable between LTG SUB DB to (JB/control gear box wherever applied) to fixtures, painting of circuit nos., wherever required, supply & fixing pipes/GI chains, supply & fixing neoprene/rubber/PVC bushes at fixtures and JBs, erection in position on brick/RCC walls OR on RCC/steel columns/roofs/structures/cable trays OR on poles, cable glanding & termination, crimping of lugs & connections at fixtures/ control gears, supply of all erection materials including supply of necessary GI hardware, GI clamps, GI brackets, civil masonry materials, testing of following types of LIGHTING FIXTURES with all their parts & accessories etc.,including fixing of lamps, all work, labour and materials complete as per drawings and documents, specifications, codes & standards and instructions / directions of ENGINEER IN CHARGE. |
| 80 | 150 W LED Flame proofflood lighting fixture with integral Control gear box,FLP Double compression Ni plated brass cable gland ,lugs etc complete suitable for mounting to above lighting pole. |
| 81 | 240V Volt AC, 100 W WELL GLASS FLAMEPROOF Ex\"d \" LED lighting fixtures (LM-6) with integral control gear box, lamp , FLP Double compression Ni plated brass cable glands ,Lugs and all other accessoriesas.(For mani fold area ) |
| 82 | 240 Volt AC, 100 W WELL GLASS Weatherproof LEDlighting fixtures (LM-6) with integral control gear box,lamp WP Double compression Ni plated brass cable glands ,Lugs and all other accessories. (For mani fold area ) |
| 83 | 240 Volt AC, 72W Well glass Flameproof Ex\"d\" LEDlighting fixtures (LM-6) with integral control gear box,lamp ,FLP Double compression Ni plated brass cable glands ,Lugs and all other accessories. |
| 84 | FLP 2 x 20 W LED, Industrial type, lighting fixtures with LED lamp and FLP glands for Loop in Loop out with all other accessories , Baliga make model no. EXFLO 240 or equivalent approved make |
| 85 | 350W LED Flood light fixture with integral control gear box for above pole .The lighting fixtures including terminations with suitable glands,suitable PVC shrouds, Lugs etc. all complete. |
| 86 | GROUND AND PLATFORM MOUNTED LIGHTING POLE |
| 87 | 2.5 mtr height( Structure mounted type) Swan neck GI Lighting pole (50mm as per IS 1239 - Medium duty ; Galvanisation of 610 Gms/sqm) for structural mounting , complete with all clamping arrangements for cables including accessories , flameproof proof JBs at the foot of the pole & termination block (as applicable), zincpassivated hardware for fixtures support & pole support , clamps, nuts, bolts, etc. including supply of commissioning spares , as required.(For manifold area ) |
| 88 | HIGH MAST LIGHTING TOWERS |
| 89 | 30 Mtr. height High Mastcomplete with accessories. The cost also includes supplying and providing trailing cable ( 5C x 10 Sq. mm. Cu cable) fromSwitch Plug & Socket at the foot of high mast to the junction box at the top FLP Motor, suitable size double compression, cable glands.Note:a)a) Rate forcivil works required for high mast foundations shall be paid separately as mentioned elsewhere. b) Lightning arrestor & aviation obstruction lamp shall also be provided as a part of supply of high mast. c) Tenderers should note that junction box shall be provided at the top of the high mast as per specifications.Rates for lighting fixtures shall be paid separately. e) High mast lantern Carraige shall be designed for mounting 24 Nos Luminiares ( 400 W LED)- PHILIPSmake OR Equivalent. |
| 90 | Specially designedflood light luminaries 400W LED lamps on High Masts.The cost shall include supply and providing 3C x 2.5 mm² unarmoured copper cable from the junction box at the top of mast to each lighting fixtures including terminations with suitable glands, Lugs etc all complete. |
| 91 | Design, supply of flameproof type Feeder Pillar Box for the operation of the 30M High Mast, Motor, Reversible Starter and other accessories. |
| 92 | approved /reputed make single dome aviation obstruction light with 2 x 15 W LED ultra bight ( RED)colour lamp , anintegral control gear ,double compression stainless stell cable glands and mounting accessories shall beprovided.single dome aviation obstruction light. |
| 93 | LT AND LIGHTING CABLES (1.1 KV Grade XLPE,Armoured, FRLSpowerand lighting cable )Horizontal and Vertical Laying of FRLS , XLPE cables of following sizes and particularson cable racks,RCC trenches, Buried trench , floor slits,in G.I. conduit (including chipping of floor wherever required), on cable trays, cable racks, cable risers, supports, hangers, saddles etc., Sealing of wall openings and pipe sleeves after cable layingetc., Including handling, transportation from owner\"s store/storage yard to installation site of cables/cable drums, unpacking , inspection, cable dressing, fixing of cable clamps in vertical and if necessary,in horizontalruns,fixingof cable identification tags (At every 20 Mtr. interval all alongthe length); testing before and after laying; supply of Aluminum cable clamps and cable tags, GI saddles and GI saddle bars ,providing cable route marker for buried cable trenches, GI bolts,nuts and washer screws etc., Actual site measurement shall be taken before cutting the cable from drum to avoid cable joint / waste,measurement of IR value, testing of cables before and after terminations for IR values, all work, labour and materials complete as per drawings, specifications, codes and standards and directions of Engineer-in-Charge. |
| 94 | 3.5Cx70 sq. mm (Al) |
| 95 | 3.5Cx25 sq. mm (Al) |
| 96 | 3Cx2.5 sq. mm (Cu) |
| 97 | EARTHING |
| 98 | Installation & testing of 100 NB, 3.8 M. long G.I. pipe Earth Electrode in Earth pit (for equipment earthing,Neutral earthing and for lightning protection) as per Drawing Nos.PDS: E 601 (3 sheets),PDS: E 602 (1sheet),PDS: E 603 (6sheets),PDS:E 604 (Sheet 1 of 1 ),PDS:E 605 (2 Sheets),PDS:E 610(Sheet 1of 1) and PDS:E 611 (2 Sheets) Including handling ,Transportation to Erection site , Excavation of Earth pit in all types of soil ,back filling of pit with common salt, charcoal / coke and loose Earth after Installation of Electrode there in, removal of surplus Earth away from Erection site, consolidation of loose Earth on back filled pit, making of bricks work, Inspection chamber on back filled pit as per drawing and cover of 6mm Thk Chequered Plate with Hinge Arrangements including provision of Frame consisting of ISA 35x35x3 Boxed Welded with ISA 25x25x3 with necessary Hole Fasteners,there of complete with lifting hook 2no\"s 12 mm Dia, fixing & connecting inside the chamber of G.I. Earth bracket and other accessories of the Earth Electrode, painting of Earth pit No. and Earthing symbol on the cover, supply of salt, charcoal /coke, bricks, sand, cement, stone chips, reinforcement rods, lifting hook, necessary stainless steel hardware, paints etc.(Excluding supply of G.I.Earth Electrode & its accessories),all works, labour & materials complete as per Drawings, specifications, code& standards and direction of consultant/owner.Bidder shall note that the excavation may be for hard or soft soil and rate is inclusive of excavation of Earth pit. |
| 99 | Installation and testing of GI earth strip / laying of earthing cable of following sizesas per PDS :E 603 (6 Sheets) PDS:E 606 (2 Sheets) enclosedin ready made concrete trenches or in floor slits, on cable racks/ risers/ trays , on brick / concrete wall , on RCC/steel columns , on RCC/steel towers and vessels, under concrete floors, or paved areas, across pipe joints and valves,directly buried under groundat depth of 500 mm, including handling, transportation to erection site , bending, straightening, cutting to size, welding together of earth strips in overlapping manner, chipping in concrete floors/ paved areasfor laying the earth stripsunder floors/ paved areas and making good by cement plastering concreteafter laying of the strips ; clamping and supporting of earth stripslaid above ground,connecting the strips/ wire at both ends to equipment or to earth bus / earth plates or to GI brackets fixed inside earthpit chamber, by bolting etc., Hessian tapes, all necessary GI hardware, GI clamps,civil masonry materials, etc.all work,labour as per specifications, codes and standards and directions of owner/consultant. Note: Rate of excavation and back filling of GI strip/earthing cable is excluded. |
| 100 | 1Cx2.5 sq.mm (Cu) flexible wire, strandard(GREEN) for Lighting fixture EXTERNAL earthing at single point for area PPH, FPH, Parking area , MS and HSD tank area |
| 101 | Installation of GI EarthBusbars(size: 390x50 x12mm thick) as per PDS:E 615(Sheet 1 of 1) Including handling, transportation, drilling of necessary holes/enlargement existing holes as required; all associated workfor fixing the Bus barsin position e.g. cutting, levelling, aligning, chipping, grouting, welding bolting etc.; making good of broken/chippedportionon walls /columns by cement plastering. supply of all necessary hardware (GI), paints, civil masonry materials etc. all work, labour complete as per drawings, specifications, codes and standards and directiosof consultant /owner. |
| 102 | Providing & Fixing 6A-DP MCB 10 KA, with Insulated Terminal for Looping facility of Street Light Pole for 3Cx2.5SQM ,1.1 KV Grade Armoured Copper Cable |
| 103 | Supplying, Installation, Testing & Commissioning of 150AH 24 Volts Batteries with Structural SteelStand for Fire Engine ( 2 Mains & 2 Stanby Batteries for Each Fire Engines). The Specifications of Batteries shall be as per Fire Engine Specifications |
| 104 | Electrical Works-Supply of GI Ladder Type Cable Tray & Cable Tray Cover- GST @ 18% Items |
| 105 | Supply of G.I. ladder type Cable Tray 100x30x3mm thick runners, Rungsat 300mm spacing, Min.2400mm length along with required Coupler Platewith stainless Hard-ware ,Hold on clamps With stainless Hard- ware ,Horizontal/Vertical - Inside / Outside bends etc. suitable for following G.I.Cable Tray & Tray Cover |
| 106 | Supply of 300 wide G.I. ladder type cable tray |
| 107 | Supply of 600 wide G.I. ladder type cable tray |
| 108 | Supply of 1050 wide G.I. ladder type cable tray |
| 109 | Supply of Cable Tray Cover as per following details |
| 110 | Supply of G.I Hot Dip Galvanised (As per IS 2629 & 4759:Latest Edition) Cable Tray Cover for 300 mm wide G.I. Ladder type cable tray of size 305 mm (Width) x 15 mm (Height) x 1.60 mm (Thickness) including supply of clamp made up of pre-galvanised sheet as per IS 277 with Top Belt & Bottom Clamp with fixed with G.I Nut Bolts at every 1500 mm centre to centre spacing including all allied accesories , G.I Washers, Nut Bolts etc. |
| 111 | Supply of G.I Hot Dip Galvanised (As per IS 2629 & 4759:Latest Edition) Cable Tray Cover for 600 mm wide G.I. Ladder type cable tray of size 605 mm (Width) x 15 mm (Height) x 1.60 mm (Thickness) including supply of clamp made up of pre-galvanised sheet as per IS 277 with Top Belt & Bottom Clamp with fixed with G.I Nut Bolts at every 1500 mm centre to centre spacing including all allied accesories , G.I Washers, Nut Bolts etc. |
| 112 | Supply of G.I Hot Dip Galvanised (As per IS 2629 & 4759:Latest Edition) Cable Tray Cover for 1050 mm wide G.I. Ladder type cable tray of size 1055 mm (Width) x 15 mm (Height) x 1.60 mm (Thickness) including supply of clamp made up of pre-galvanised sheet as per IS 277 with Top Belt & Bottom Clamp with fixed with G.I Nut Bolts at every 1500 mm centre to centre spacing including all allied accesories , G.I Washers, Nut Bolts etc. |
| 113 | Electrical Works-Installation of GI Ladder Type Cable Tray & Cable Tray Covers |
| 114 | Installation of Pre-Fabricated GI CABLE TRAY with accessories like:Coupler Plates,Hold on Clamps ,bends etc. and supporting arrangement.The work includestransportation from owners store to erection site,unpacking, inspection;checking, Erection in position on supports,fixing, supply of all erection materials Including necessary hardware, fixing over cable tray supports/walls by grouting/plant-non-plant buildings , various cross overs etc. at Height upto 30.00 meters /Trenches upto 3.0 meter deep etc..All work, labour and materials complete as per drawings, specifications,codes and standards and directions of Engineer-in-Charge. |
| 115 | Installation of 300 wide G.I. ladder type cable tray |
| 116 | Installation of 600 wide G.I. ladder type cable tray |
| 117 | Installation of 1050 wide G.I. ladder type cable tray |
| 118 | Installation of G.I Hot Dip Galvanised (As per IS 2629 & 4759:Latest Edition) Cable Tray Cover including installation of clamp made up of pre-galvanised sheet as per IS 277 with Top Belt & Bottom Clamp with fixed with G.I Nut Bolts at every 1500 mm centre to centre spacing including all allied accesories , G.I Washers, Nut Bolts etc.The work includes transportation from owners store to erection site,unpacking, inspection;checking, Erection in position on supports,fixing, supply of all erection materials Including necessary hardware, fixing over cable tray supports/walls by grouting/plant-non-plant buildings , various cross overs etc. at Height upto 30.00 meters /Trenches upto 3.0 meter deep etc. All work, labour and materials complete as per drawings,specifications,codes and standards and directions of Engineer-in-Charge. |
| 119 | Installationof 305 wide G.I. ladder type cable tray Cover of 1.6 mm Thk |
| 120 | Installation of 605 wide G.I. ladder type cable tray Cover of 1.6 mm Thk |
| 121 | Installation of 1055 wide G.I. ladder type cable tray Cover of 1.6 mm Thk |
AI Tender Summary
Tender Timeline
Jul 27, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedAug 08, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 09, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
Completed