Creation Of Washroom For Male Attendant At Maternity Hospital At Skims
Tender Value
10000
Estimated cost
Bid Submission
08 Aug 2022
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
soura → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Creation Of Washroom For Male Attendant At Maternity Hospital At Skims
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 28-Jul-2022 | BOQ MODIFIED | BOQ | 08-Aug-2022 |
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil : |
| 2 | P/l of hand packed stone soling/boulders including all carriage upto site of work. |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: (1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) including all carriage |
| 4 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. Allworks upto plinth level( 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) including all carriage |
| 5 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including all carriage |
| 6 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level (Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 7 | Centering and shuttering including strutting, propping etc. and removal of form for: |
| 8 | Foundations, footings, bases of columns etc. for mass concrete. |
| 9 | Suspended floors, roofs, landings, balconies and access platforms. |
| 10 | Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 11 | Edge of slab and breakes in floors and walls under 20 cm wide |
| 12 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :( Cement mortar 1:4 ( 1 cement : 4 coarse sand) including all carriage |
| 13 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level |
| 14 | 12mm Cement plaster of mix: ( 1 : 4 ( 1 cement : 4 coarse sand) |
| 15 | Washed stone grit plaster on exterior walls of height upto 10 m above ground level in two layers, under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand), furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 2kg of cement per m2, top layer 15mm cement plaster 1:1/2 :2 (1 cement: 1/2 coarse sand : 2 stone chippings 10mm nominal size), in panels with groove all around as per approved pattern including scrubbing and washing the top layer with brushes and water to expose the stone chippings, complete as per specification and direction of Engineer-in -charge (payment for providing grooves shall be made separately). |
| 16 | Forming groove of uniform size in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer, including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge : ( 15 mm wide and 15 mm deep groove) |
| 17 | Providing and fixing 1st quality ceramic glazed wall tiles conforming toIS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 18 | Kota stone slab flooring 25 mm thick over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing, polishing and curing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand) : |
| 19 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): ( First class deodar wood) |
| 20 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.( With ISI marked M.S. pressed butt hinges bright finished of required(35 mm) |
| 21 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 3.5mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. ( First class kail wood)30 mm thick |
| 22 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butthinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : ( First class kail wood) 30 mm |
| 23 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. ( 2 mm thick) |
| 24 | Wall Painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work |
| 25 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface. |
| 26 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two more coats on new work |
| 27 | P/f of GI pipe including GF.I fittings and clamps including cutting and making good the wall(concealed pipe) |
| 28 | 15 mmnominal bore |
| 29 | 20 mm nominal bore |
| 30 | p/f of cp bib cock of approved make(jaquar/parko)long body |
| 31 | p/f of cp angle valve of approved make(jaquar/parko)long body |
| 32 | p/f of cp wall/basin mixerof approved make(jaquar/parko)long body |
| 33 | p/f of flexible waste pipe of approved make(jaquar/parko)long body |
| 34 | p/f of PVC connectionsof approved make(jaquar/parko)long body |
| 35 | p/f of mirror approved make(jaquar/parko)long body |
| 36 | Providing and fixing of soap case of approved make |
| 37 | Providing and fixing of Cp grating of approved make |
| 38 | Providing and fixing of ball value of approved make |
| 39 | Providing and fixing of following fittings of approved make |
| 40 | GI union 15mm |
| 41 | union 20mm |
| 42 | Reducer 20x15 |
| 43 | Cross over15mm |
| 44 | Providing and fixing of water closet squatting pan ( Indian type WC pan) with 100 mm sand cast iron P or S trap, 10 litre low level white PVC flushing cistern, including flush pipe with manually controlled device (handle lever) conforming to IS:7231 with all fittings and fixtures complete including cutting and making good the wall and floors whereever required. white viterous china orissa Pattern WC pan of size 580x440mm with integral type foot rests. |
| 45 | Providing and fixing of CI pipes of approved make including jointing with lead caulked and all carriages upto site of work earth work in excavation whereever required. |
| 46 | Providing and fixing of CI fittings of approved make including jointing with lead caulked and all carriages upto site of work(100mm dia) |
| 47 | Plain bend |
| 48 | floor trap |
| 49 | collar |
| 50 | Door tee |
| 51 | Plain -tee |
| 52 | Providing and fixing wash basin with Ci brackets 32mm CP brass waste of standard pattern including painting of fittings and brackets cutting and making good the walls wherever required white viterous china wash basin size 550X400mm |
| 53 | Providing and fixing of china pedastal for wash basin completely recessed at the back for the reception of pipes and fittings. |
| 54 | Providing and fixing of CP nipples of approved quality and manufacture: |
| 55 | 15*25 mm |
| 56 | 15*50 mm |
| 57 | p/f of hardware fittings of approved make: |
| 58 | Tower bolt 100mm |
| 59 | Tower Bolt 150mm |
| 60 | Handle 100 mm |
| 61 | Handle 150mm |
| 62 | Link Lock 8\" |
| 63 | constructing brick masonary manhole of specified size 60x60x90cmbricks of class designation 75 230mm thick in cement mortar 1:4including Mud mat in 1:4:8 mix and inside plastering 12mm thick in 1:3 mix with floating coat of neat cement slurry andRCC slab with top cover of C.I with frame complete in all respects |
| 64 | Structural steel work welded in built up section , trusses and framed work including cutting, hoisting, fixing in position and applying priming coat of steel primer of approved make |
| 65 | Providing corrugated GS sheet roofing including vertical/curved surfaces fixed with polymer coated J or L hooks, nuts bolts with G.I Limpet washers including priming coat to overlaping with approved steel primer 0.63mm thick sheets |
| 66 | Providing ridges or hips of width 60cm overall with plain GS sheets fixed with polymer coated J or L hooks nuts, bolts and G.I Limpet and bitumen washers.(.50 mm thick) |
AI Tender Summary
Tender Timeline
Jul 28, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedAug 08, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 09, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender