Repair / Maintenance Of Ht Lines, Ht Cables, Ht Poles, Transformers And Other Connected Works At Various Locations Under Bhalra Mil Stn Under Ge ( I ) 873 Ews.
Tender Value
40 Lakhs
Estimated cost
Bid Submission
17 Aug 2022
0 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
bhaderwah → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repair / Maintenance Of Ht Lines, Ht Cables, Ht Poles, Transformers And Other Connected Works At Various Locations Under Bhalra Mil Stn Under Ge ( I ) 873 Ews.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth, or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 2 | Non skid JOINT FREE coloured ceramic tiles 7 - 8 mm thick area of each tile exceeding 0.18 Square metre but not exceeding 0.38 Square metre in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, over and including 15mm thick screed bed in CM (1:4) complete all as specified and directed. |
| 3 | Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, light shade, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15mm thick screed bed in CM (1:4) complete all as specified and directed. |
| 4 | Non-skid ceramic coloured tiles 7 to 8 mm thick (square / rectagular) area of each tile exceeding 0.06 Square metre but not exceeding 0.11 Square metre,in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, over screed bed 15 mm thick in cement mortar 1:4 complete all as specified. |
| 5 | Glazed JOINT FREE ceramic coloured tiles in skirting/dado 350 x 250 x 7mm /450 x 350 x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match required shade over and including 10 mm thick cement plaster in cement mortar 1:3 as backing coat rough finished surface complete all as specified. |
| 6 | 25 mm thick plain cement concrete (1:2:4), type B-0 using 12.5mm graded stone aggregate as in levelling course as reqd,complete all as specified and as directed. |
| 7 | Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level) and disposal of unserviceable material, debris andrubbish to a distance not exc. 100m, complete all as specified and as directed. |
| 8 | Factory made (rectified) precast concrete rubber moulded designer chequered tiles any colour, shape and size not less then 200mm x 200mm x 25mm thickness (compressive strength not less than 250 Kg/Sqm), pointed with grey cement and pigment over and including 20mm thick CM 1:4 screed bed or bedding layer complete. |
| 9 | 75mm thick plain cement concrete 1:3:6 type C2 (40mm graded crushed aggregate) as in sub base of floors/paving, finishing surface even & fair, complete all as specified and directed |
| 10 | 100mm thick plain cement concrete 1:4:8 type D2 (40mm graded crushed aggregate) as in sub base, finishing surface even & fair, complete all as specified and directed |
| 11 | 50mm thick plain cement concrete 1:2:4 type B-1 (20mm graded crushed aggregate) as in floor/hardstanding surface finshed even and smooth w/o using extra cement including necessary formwork to divide the area into panels, complete all as specified and directed |
| 12 | 75 mm thick plain cement concrete (1:3:6), typeC-2 using 20mm graded stone aggregate as in plinth protection and laid in panels complete and finished the even & fair and providings joints through out the thickness of plinth protection filed with mastic filling comprising one part of bitumen 85/25 grade and three part of sand by weight all as specified and directed. |
| 13 | Machine pressed precast concrete interlocking paver block any shape and size as approved by GE confirming to IS 15658-2006 of 80mm thickness, M-40 Grade with grey cement and pigment laid over and including 25mm thick sand cushioning, complete all as specified. |
| 14 | Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work, complete all as specified and directed. |
| 15 | Brick work with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius, built in cement mortar 1:6, complete all as specified and directed. |
| 16 | Walling of random rubble stone masonry brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar (1:6), complete all as specified and directed.Note:- Deduction of volume occupied by PCC bond stones shall be made from stone masonry |
| 17 | Description all as per item No. 16.00 above, but except stone complete all as specified and directed |
| 18 | Providing precast cement concrete 1:3:6 Type C-1 (using 20mm graded crushed stone aggregates) as in anchorage blocks, bonders (for stone walling) including chamfers, weatherings, throating etc. and setting in cement mortar 1:6 complete with joints to match complete all as specified. |
| 19 | Raking out joints/ pointing to random rubble or polygonal rubble uncoursed or brought up to courses, built in cement mortar, complete all as specified and directed. |
| 20 | Raised pointing to random rubble masonary, or polygonal rubble, uncoarsed or brought upto courses in cement mortar 1:4, complete all as specified and directed. |
| 21 | Plain cement Concrete 1:2:4 type-B-1 (using 20mm graded crushed stone aggregate) as in copings,and like slightly rounded or chamfered angles as directed including necessary form work, complete all as specified. |
| 22 | PVC (SWR) pipes 110mm bore any length single socketed with rubber ring joint laid in weep holes, fixed, complete all as specified and directed. |
| 23 | Broken stone or boulders in hand packing (any thickness) gauge exceeding 80mm but not exceeding 150mm, as in back filling of retaining walls etc., complete all as specified. |
| 24 | Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for and disposal of unserviceable material, debris andrubbish to a distance not exc. 100m, complete all as specified and as directed. |
| 25 | Plain cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in surface channels and drains including necessary formwork, complete all as specified. |
| 26 | Taking down cement plaster or cement lime plaster on stone or brick walls or concrete surfaces etc including racking out joints, hacking for key scrubbing down with water etc.complete all as specified. |
| 27 | Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement, complete allas specified and directed. |
| 28 | 15mm thick rendering in CM 1:6 onother than fair faces of brick or stone masonry surfaces & finishing the surface even and smooth without using extra cement, complete all as specified |
| 29 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness including Nainital or similar pattern roof covering, all as specified. |
| 30 | 0.63mm thick galvanised corrugated mild steel sheeting with grade of Zinc coating of 275 gms/Square metre with two corrugation side lap and at least 150 mm end lap , fixed with L or J type or cranked hook bolts, in roof, walls etc, complete, all as specified. |
| 31 | Description all as per item No. 30.00 above, but except sheet complete all as specified and directed |
| 32 | 0.80mm thick plain galvanised mild steel sheeting with 275 gm/Square metre Zinc coating as in ridge, hips, valley gutters, drip and straight flashing fixed withL or J type or cranked hook bolts, complete, all as specified. |
| 33 | Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified. |
| 34 | Pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified. |
| 35 | Dismantling structural steel work including doors, gates but excluding framed truss etc., complete all as specified |
| 36 | Rolled mild steel work in joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary length i.e. within 20mm of the length indicated),conforming to Fe-410-0 or Fe-310-0, complete all as specified & directed. |
| 37 | Dismantling of timber scantling under 40sqcm and over in section unframed work,as in fillets, rails, posts, rafters, purlins etc , complete all as specified. |
| 38 | Second class hard wood as in scantling, clean sawn fixed in position with nails, framed work, complete, all as specified and directed. |
| 39 | Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets all as specified & directed |
| 40 | S/F 4 mm thick non asbestos fiber cement plain building boards in false ceiling on and incl aluminium snap grid work 605 x 605 mm withusing 36.5mm x 23.5 mm x 1.5 mm thick main tee, 23.5 x 23.5mm x 1.28 mm cross tee and 25x25x1.5mm angles fixed to perimeter of wall including necessary supporting hanger with 3 mm dia GI wire and J bolts washer nuts for securing frame work to ceiling suspended @ 120 cm c/c both ways, complete all as specified and directed. |
| 41 | 12mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame workcomplete all as specified and as directed. |
| 42 | S&F PVC wall panelling made up of PVC hollow panels 25/30cm in width and 10mm thickness interlocking pattern of approved shade and design fixed to wall or ceiling, fixed in repair, all as specifed and directed. |
| 43 | Taking down shutters of any description exceeding 1Square metre and not exceeding 2Square metre each and refixing in the same opening, complete all as specified and directed. |
| 44 | Door closure hydraulically regulated designation No. 3 universal type of aluminium (die cast) body, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kilogam and fixed in repairs, complete all as specified and as directed. |
| 45 | Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed and fixed in repairs, complete all as specified and as directed. |
| 46 | Preparation of newly plastered surface of wall including cornices pilaster etc, and applying two coats of cement base paint over a coat of alkali resistant primer, complete as specified and directed. |
| 47 | Preparation of old decorated or undecorated surfaces of ceiling, and applying two coats of distemper oil emulsion, white or tinted, complete as specified and directed. |
| 48 | Preparation of new steel surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and as directed. |
AI Tender Summary
Tender Timeline
Jul 27, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedAug 17, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 20, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender