|
| 1 | Civil work: |
| 2 | Dismantling brick work or stone work in lime or cement mortar andincluding stacking of materials as directed by theEngineer-in-charge within a distance of 60 metre(CSI No. 15.01) |
| 3 | Dismantling reinforced cement concrete or reinforced brick work,including stacking of dismantled materials as directed by theEngineer-Incharge within a distance of 60 metres. (CSI No. 15.03) |
| 4 | Dismantling cement concrete or brick or granolithic floorsincluding base concrete and including stacking of dismantledmaterials as directed by the Engineer In-charge within a distanceof 60 metres. (CSI No. 15.05) |
| 5 | Dismantling existing plaster including disposal of refuse asdirected by the Engineer-I/C within a distance of 60 M. (CSI No. 15.11) |
| 6 | Scrapping old white or colour wash or distemper including disposal of refuseas directed by the Engineer-I/C within a distance of 60 M. (CSI No. 15.12) |
| 7 | Excavation in foundation in ordinary soil (Loam Clay or Sand) including lift upto 1.5m and lead upto 30m and including filling, watering and ramming of excavated earth into the trenches or into the space between the building and sides of the foundation work. (CSI No. 4.01) |
| 8 | Clearing jungle including uprooting of rank vegetations,grass, bush, wood, trees and saplings of girth upto 30cm measured at a height of 1.0m above ground level and removal of rubbish upto a distance of 50m outside the periphery of UPPCL area cleared. (CSI No. 4.08) |
| 9 | Local Fine sand of 1.25 F.M. filling in plinth including supply of necessary quantity of sand from ariver/canal nearest to the site of work including watering, ramming and dressing etc. Rate to include cost of all materials, labour and T&P etc. required for proper completion of work. (KDA apprd.) |
| 10 | Concrete with 4cm gauge I class brickballast, coarse sand (F.M. 1.8 to 2.5) and cement in proportion of 12:6:1 in foundations and under floors including supply of all materials, labour and tools and plants etc. required for proper completion. (CSI No.5.01 ) |
| 11 | RCC work with cement, approved coarse sand(F.M. 1.8 to 2.5) and2 cm gauge graded approved hard stone ballast like granite, quartzite etc from Dalla, Jhansi or other quarries in proportion 1:1.5:3in lintels of doors and windows, excluding supply of reinforcement & its bending but including its fixing and binding the same with binding wire, including cost of all other materials labour and T&P. . (CSI No. 5.23) |
| 12 | Cement concrete with 2cm gauge approved hard stone ballast,coarse sand (F.M. 1.8 to 2.5) and cement in proportion of 3:1.5:1including supply of all materials, labour,side shuttering ifrequired and T&P etc. required for proper completion of work(CSI No. 5.21) |
| 13 | First class brick work in 1:6 cement and coarse sand(F.M.1.8 to 2.5) mortar in foundation and plinth including supply of allmaterials, labour & T&P etc. required for proper completion of work. (CSI No. 6.01) |
| 14 | First class brick (class-150) work in 1:6 cement and coarse sand (F.M.1.8 to 2.5) mortar in super structure of one brick thick wall including supply of all materials, labour & T&P etc. required for proper completion of work. (CSI No. 6.01+6.08) |
| 15 | First class brick (class-150) work in 1:4 cement and coarse sand (F.M.1.8 to 2.5) mortar in super structure of 1/2 brick thick wallincluding supply of all materials, labour & T&P etc. required for proper completion of work (CSI No. 6.03+6.09) |
| 16 | 12 mm thick plaster with cement mortar consisting of one part of cement & six part of coarse sand(1:6),minimum thickness not to be less then 10 mm including supply of all material, labour and T&P etc for proper completion of work.(CSI No. 11.09) |
| 17 | 12 mm thick plaster with cement mortar consisting of one part of cement & four part of coarse sand (1:4), minimum thickness not to be less then 10 mm including supply of all material, labour and T&P etc for proper completion of work.(CSI No. 11.07) |
| 18 | Add for extra labour and materials for plaster over rough face ofone brick thick wall. (CSI No. 11.12) |
| 19 | Brick work in foundation & plinth with old dismantledbricks (supplied by department free of cost) and coarse sand of F.M. 1.8 to 2.5mortar in 1:6 including supply of all other materials, labour, removing mortar & cleaning of old & used bricks,T&P etc complete. (CSI No. 6.18) |
| 20 | Same as in item 6.18 above butin super structure for 230 mm thick wall. (CSI No. 6.19) |
| 21 | Dismantling doors or window leaves including stacking ofmaterials as directed by the Engineer I/C within a dist. 60 M. (CSI No. 15.09) |
| 22 | Dismantaling doors and windowschowkhatsincluding stacking of materials as directed by Engg-in-Charge within a distance of 60 meters. (CSI No. 15.10) |
| 23 | Supply of 80 mm thick I shaped mechanically compressed inter locking cement concrete paver block manufactured by high pressure & controlled vibration machine having plan dimension 200X(160+120 mm) with minimum 5 mm thick toping of O.P.Cement mixed with 25% marble powder. The compressive strength of concrete pavers blocks shall not be less than 30 MPa & 4.5 Kg/No. including cost of all material, labour, T&P etc. required for proper completion of work as directed by Engineer-in-charge but execluding U.P.T.T. which shall be paid extra as per rules. (CSI No.12.23) |
| 24 | Supply and fixing of 32 mm thick single leaf flush door shutter ( boiled water resistance, phenol maldehide resin bonded, hot pressed factory made) commercial quality to I.S.2202 part-1 (1983) ISI marked including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges,bolts.locks,handles, springs and other fittings but excluding their supply including all materials,labour & T&P etc. required for proper completion of work. (CSI No. 8.57) |
| 25 | As in item no. 8.57 but for 40 mm. thick single leaf flush door shutter.(CSI No. 8.58) |
| 26 | Mild Steel or Iron work in heavy sizes such as trusses built upgates, door frames, record, racks roof work gates etc. wrought torequired form including holes rivetting or welding where necessary and also fixing in proper position and alignment including cost of all materials supplied by contractor. (CSI No. 9.01) |
| 27 | TMT/Tor steel in plain work such as reinforced concrete orreinforced brick work (when not included in an over all rates)wrought to required shape as necessary including bending forproper completion of the work and including supply of steel its wastage, bend, hooks and authorized overlapping shall be measured. (Steel shall be arranged by the contractor)(CSI No. 9.03) |
| 28 | Mild steel or Iron work in purlins and rafters includingdrilling holes and fixing in position and including supply of allsteel and bolts and nuts, wastage labour and T&P etc required forproper completion of the work. Steel shall not be supplied by department . (CSI No. 9.05) |
| 29 | Providing barbed iron wire fencing including fixing in postafter straightening it including labour and T&P etc. requiredfor proper completion of the work but excluding supply of postsand wire.(labour rates only) . (CSI No. 9.06) |
| 30 | Dismantling existing barbed wire fencing including making bundlesand stacking etc.complete.(labour rates only) . (CSI No. 9.06a) |
| 31 | Providing and Fixing barbed iron wire fencing including stretching, fixing into the post including all labour, materials and T&P required for proper completion of work. the weight of hot dipped GI barbed wire having 12 SWG - 2 ply wires and 4 point ordinary barbs @ 150 mm (approx) C/C should be 100 gm per Meter. (CSI No. 9.07) |
| 32 | Repair to plaster or pointing in patches including removal of old plaster racking out joints to 1 cm.(3/8\") depth,watering the area and then replastering or reappointing with the same mortar or proportion of mortar as the existing surface including supply of all materials, labour and T&P etc. required for proper completion of the work . (CSI No. 20.02) |
| 33 | 3 mm thick floating coat of neat cement finish including supply of all materials,labour and T&P etc. required for proper completion of the work.( cement consumption 0.044 bag/Sq.m.) (CSI No. 11.20) |
| 34 | Providing (12x15) mm section groove in plasterincluding all material, labour andT&P etc. required for proper completion of the work. (CSI No. 11.16) |
| 35 | Applying Birla or equivalent putty on new interior or exterior surface over one coat of water based cement primer of ICI or equivalent brand for smoothening and levelling of the surface as per requirement and direction of Engineer I/C including cost of all material, labour, T & P etc required for proper completion of work. (CSI No. 13.20) |
| 36 | Applying BIRLA PUTTY or equivalent putty on previousaly bila putty smoothen surface over one cost of water base cement primer of ICI or equivalent brand for smoothining and leveling of the surface as per requirement and direction of E/I including cost of all material , labour and T&P required for proper completion of work.(CSI No.13.21) |
| 37 | One priming coat and one coat oil bound distemper on new work includingsupply of all materials,labour and T&P etc. required for propercompletion of the work. (CSI No. 13.08) |
| 38 | As in item 13.08 but for every coat after the first coat. (CSI No. 13.09) |
| 39 | As in item 13.08 but for every coat on previously old oil bound distemper surface. (CSI No. 13.10) |
| 40 | Painting one coat with APEX or equivalent brand weather coat paint on new wall surfaces (well prepared with Birla putty and one coat of primer ICI or equivalent which shall be paid separately) including through washing with water including cost of all materials, labour, T&P required for proper completion of work. (CSI No. 13.22) |
| 41 | Same as in item no 13.22 above but for every coat of additional APEX or equivalent brand weather coat paint . (CSI No. 13.23) |
| 42 | Same as in item 13.22 but for each coat ofAPEX or equivalent brand weather coat paint .on previously treated surface. (CSI No. 13.24) |
| 43 | Painting one coat with Acrylic emulsion paint of Berger/ Asian/ ICI or equivalent paint (Paint and water in the ratio 1:1 by volume) over prepared and primed surface of cement concrete, cement plaster and bricks including all labour, material and T&P etc required for proper completion of the work, (preparation of base with Birla putty etc. and a coating of primer shall be paid extra) . (CSI No. 13.25) |
| 44 | Same as above in item no. 13.25 but for every coat after first coat of Acrylic emulsion paint of Berger/ Asian/ ICI or equivalent paint. (CSI No. 13.26) |
| 45 | Same as above in item no. 13.25 but one coat of Acrylic emulsion paint of Berger/ Asian/ ICI or equivalent paint on previously painted surface. (CSI No. 13.27) |
| 46 | Finishing walls with water proof cement paint of approved madelike \"Super Snowcem\" or equivalent quality on new work withtwo coats to give an even shade including supply of allmaterials, labour etc. required for proper completion of work. (CSI No. 13.17) |
| 47 | Same as in item 13.17 but for each coat of water proof cement paint after the first two coats to give an even shade. (CSI No. 13.18) |
| 48 | Same as in item 13.17 but for each coat of water proof cement paint. on previously treated surface.(CSI No. 13.19) |
| 49 | 2.5 cm thick 1:2:4 plain cement concrete floor with cement, approved coarse sand & 2cm graded approved stone ballast laid in panels finished with 3mm floating coat of neat cement or cement and marble dust in ratio of 5:1 as specified and givingthem a uniform finish including supply of all materials, labour and T&P etc, required for proper completion of the work. (CSI No. 12.02) |
| 50 | 4.0 cm thick 1:2:4 plain cement concrete floor with cement, approved coarse sand & 2cm graded approved stone ballast laid in panels finished with 3mm floating coat of neat cement or cement and marble dust in ratio of 5:1 as specified and removing any overlapping mortar at the joints of the panels if any and giving them a uniform finish including supply of all materials, labour and T&P etc, required for proper completion of the work. without base CC (CSI No. 12.04) |
| 51 | Supply and Laying 8 mm thickglazed floor tiles of Somany, Johnson or equivalent make, , laid with1:3 cement and approved coarse sand mortar finished with whitecement slurry, jointing and polishing complete, including supplyof all materials, labour and T&P etc. required for proper completion of the work.(CSI No. 12.11) |
| 52 | Same as 12.18 above but for providing and fixing 8 mm thick vitrifiedtiles in flooring or skirting with adhesive of approved quality on existing smooth floor including cost of all material, labour and T&P required for proper completion of the work. (CSI No. 12.19) |
| 53 | Providing and laying floor of 10 mm thick vetrified tiles(Standerd quality) in flooring or skirting of approved brand (Bell, Johnson or equi. make) size of 600x600 mm of approved shade, colour and pattern , laid over base cement mortar 1:4 mix including finishing the joints with white cement mixed with pigment to match the shade of tile including cost of all material, labour and T&P required fo (old CSI No. 12.18) |
| 54 | Providing and laying of 16 mm thick granite ( black/ brown) inflooring or skirting ,of approved shade, colour,size and pattern , laid over base cement mortar 1:4 mix including finishing the joints with white cementmixed with pigment to match the shade of granite floor including cost of all material, labour and T&P required for proper completion of the work, as per direction of Engineer incharge. (CSI No.12.20) |
| 55 | Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work (CSI No. 28.19) |
| 56 | Providing and fixing of 110 mm dia PVC pipe 6 Kg/ Sq.cm forwith special such as Tee, bend, socket, elbow etc including supply of all labour,material,T & P etc complete required for proper completion of work. (CSI No. 26.17) |
| 57 | Fixing of Departmental doors & windows shutters including supply& fixing of hinges and other fixtures.(excluding their supply) including all materials,labour & T&P etc. required for proper completion of work. (CSI No. 8.51) |
| 58 | P/F fully Anodized aluminium fixed glazing with HINDALCO or equivalent extruded standard sections14gauge (2.41mm thick) of various cross sections and joints mitred and jointed as shown in drawingincluding providing & fixing 5.5 mm thick toughened glass with Neoprene beading & aluminium glazing clips all around. The minimum thickness of anodizing on all aluminiumsections should be 20 microns with a (+) 2 microns tolerance . The rate should include the cost of fixing the aluminum frame on Teak wood frame or finished wall (RB/RCC/Masonry) surface by means of 80 mm long approved counter sunk screws provided at 500 mm c/c or part there of starting from 100 mm above the bottom in vertical member and 100 mm from both the ends of horizontal top and bottom member excluding cost of Teak frame but including cost of all other material, labour, tools & plants etc. complete. (CSI No. 8.52) |
| 59 | Same as above item No. 8.52 but for openable window portion as shown in drawings, including cost of Aluminium hinges and all other fittings like concealed towerbolts handles etc of approved quality and including cost of all other material, labour, tools & plants etc. complete. (CSI No. 8.53) |
| 60 | Same as in item No. 8.52 but for openable gate/door portion as shown in drawings including cost of hinges and Aluminium fittings like tower bolts, handles, stoppers, push plates, brass body with brass component 6 levers cocealed lock etc of heavy & approved quality and including cost of all other material, labour, tools & plants etc. complete. (CSI No. 8.54) |
| 61 | S/Fixing of double action floor springs including cutting in floors / RCC slabs and grouting the same with C.C. & finishing the surface properly as and where required under aluminium doors as per direction of Engineer-in-charge.including cost of all other material, labour, tools & plants etc. complete. (CSI No. 8.55) |
| 62 | As in item no. 8.55 but for single action floor springs. (CSI No. 8.56) |
| 63 | S/F Galvanized Mosquitos proof heavy quality iron wire gauge (14x24) over window frames and including supply of Shishum wood battens 8cm x 1cm) and including supply and fixing of necessary screws, all materials,labour andT&P etc. required for proper complete. (CSI No. 8.44) |
| 64 | As in item 8.43 above butwith Country woodbattens 8cm x 1cm. (CSI No. 8.45) |
| 65 | Additional cost for fixing glass panes with C.P. teak woodbeadinginstead ofputtyincluding cost of materials, labour andT&Petc. required for proper completion of the work.(CSI No. 8.07) |
| 66 | Indian Sal wood wrought framed and fixed including simple, mouldings straight work as in Chaukhats including supply of allmaterials, labour and T&P etc.required for proper completion ofthe work. (CSI No. 8.03) |
| 67 | Supply and fixing of 3.5 cm. thick Shisham wood fully panelled door and window shutter including supply and fixing of wooden cleats and stoppers and including fixing and adjustment of hinges bolts, locks, handles, springs and/or other fittings but excluding their supply and including fixing the glass panes with putty and necessary screws (Glass panes to be 4 mm thick.). (CSI No. 8.23) |
| 68 | As in item 8.22 above but 35 mm. thick Shishum woodfully glazed.(CSI No. 8.24) |
| 69 | Providing and fixing 19.00 mm thick ply board/block board for wardrobe shutter etc. of Reliance or Scorpio or equivalent make including teak wood beading around the shutter and including fixing and adjustment of hinges, bolts handle and other fittings but excluidng their supply and including cost of all material labour, T&P etc. required for the proper completion of the work. (Old CSI 8.25) |
| 70 | P/Fof 6.0mm thick Water Proof Commercial quality plywood in partition work to make 5x4mm size groove at specified intervals. Ply shall be fixed by means of glue and headless nailsat 100mm c/c complete. Cost including all labour, material,T&P required for proper completion of work. (Old CSI 8.30) |
| 71 | Extra for providing and fixing flush doors and partitions with teak vineering/ sunmica of approved quality as per specification or directed by E/I. including cost of all material labour, T&P etc required for proper completion of work. (Old CSI 8.27) |
| 72 | Supply and fixing 24 B.W.G , G.C. Iron Sheet roofing .fixed in position with J or U bolts 10 mm. dia with G.I. Limpet & bitumen washers including supply of all materials, labour,wastage. and T&P etc. required for proper completion of the work. (CSI No. 10.01) |
| 73 | Providing and fixing 15 mm dia B-class Jindal,JTC, ISI marked G.I. pipes complete with special such as bend, tee, socket, cross, clamp etc earth work including filling the trenches etc required for proper completion of the work. the rate also includes concealed GI fitting where required, cutting and making good the walls etc and all materials, labour and T&P complete. (CSI No. 26.01) |
| 74 | Same as in item no. (26.01 above but for 20 mm dia. (CSI No. 26.01(b)) |
| 75 | Same as in item no. (26.01 above but for 25 mm dia. (CSI No. 26.01(c)) |
| 76 | Same as in item no. (26.01 above but for 32 mm dia. (CSI No. 26.01(d)) |
| 77 | Supply & fixing of CPVC Pipe 20mm (Chlorinated polyvinyl chloride) having thermal stability for hot and cold water supply including all CPVC plan, bras thread fitting and required labour etc. complete in all respect. (DSR 18.8.2) |
| 78 | Supply & fixing of CPVC Pipe 15mm (Chlorinated polyvinyl chloride) having thermal stability for hot and cold water supply including all CPVC plan, bras thread fitting and required labour etc. complete in all respect. (DSR/18.8.1) |
| 79 | Providing and fixing full way 15mm dia G.M. gate valve with wheel, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.04a) |
| 80 | Providing and fixing full way 20mm dia G.M. gate valve with wheel, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.04b) |
| 81 | Providing and fixing full way 25mm dia G.M. gate valve with wheel, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.04c) |
| 82 | Supply and fixing of Syntex or equivalent make water storage tank including all materials, labours, T&P etc required for proper completioon of work. (CSI No. 26.12) |
| 83 | Providing and fixing PVC BALL FLOAT VALVE 15 mm dia. WITH BRASS & UNION COMPLETE, ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.06) |
| 84 | Supply and fixing pvc Nahani Trap India make of heavy approved quality complete with CI grating,includingsupply of all materials,labour and T&P etc. required for proper completion of the work. (CSI No. 27.21b) |
| 85 | Providing and fixing CI GRATING 100 mm dia includingall materials, labour cartage T&P etc.required for proper completion of the work. (CSI No. 27.25) |
| 86 | Providing and fixing in position 32 mm. dia P.V.C.WASTE PIPE FOR WASH BASIN. including supply of all materials,labour and T&P etc.required for proper completion of the work. (CSI No. 27.14) |
| 87 | Providing and fixing 10 litres low level PVC flushing cistern, COMPLETE WITH ALL FITTINGS including supply of all materials, labour and T&P etc. required for proper completion of the work. (CSI No. 27.12) |
| 88 | Providing and fixing PLASTIC SEAT COVERCOMPLETE WITH PLASTIC LID FOR EUROPEAN TYPE WC ISI MARKEDincluding supply of all materials,labour and T&P etc.complete. (CSI No. 27.04) |
| 89 | Providing and fixing 100 mm dia PVC \"P\" or \"S\" trap including cement concrete and all materials, labour cartage T&P etc.required for proper completion of the work.(For W.C.) (CSI No. 27.24) |
| 90 | Providing and fixing Stainless Steel sink 610x450x200 mm Heavy Quality( ISI MARKED ) includingall materials, labour cartage T&P etc.required for proper completion of the work. (CSI No. 27.26) |
| 91 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete (CPWD 17.33) |
| 92 | Providing and fixing PVC CONNECTION PIPE, 300X15 with 2 brass units ISI mark heavy quality including supply of all materials, labour and T&P required for proper completion of work. (CSI No. 26.09) |
| 93 | Providing and fixing in position 32 mm. dia P.V.C. flush pipe. for W.C. with unions, bends etc. including supply of all materials,labour and T&P etc.required for proper completion of the work. (CSI No. 27.13) |
| 94 | Providing and fixing of 15 mm dia C.P.Brass Angle Valve of heavy quality L&K or equiv. make including supply of all materials, labour and T&P etc. required for proper completion of the work. (CSINo. 26.16 i) |
| 95 | Providng and fixing 15 mm dia C.P. Brass stop cock ofL & K or equivalent make including supply of all materials, labour and T&P etc. required for proper completion of the work. (CSI No26.16c) |
| 96 | Providing and fixing first quality white glazed \"Orissa\" pattern W.C.Pan Hindustan, Cera make. size 580 mm.(Hindustan,Cera Make) with out \"P\" trapincluding supply of all materials,labour and T&P etc.complete. (CSI No. 27.01) |
| 97 | As in item no. 27.01 but of European type. (CSI No. 27.02) |
| 98 | Providing and fixing 550X400 mm wash hand basin of white glazed earthern ware first quality I.S.I. marked (Hindustan,Neycer / Cera make) including supply of all materials, labour and T&P etc. required for proper completion of the work. (CSI No. 27.08) |
| 99 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings (CPWD 17.08) |
| 100 | Providing and fixing 15 mm nominal CP Brass Single lever telephonic wall mixer of of L&K or equivalent quality & make as approved by Engineer in charge. (CSI No. 26.16g) |
| 101 | C.P.BRASS telephonic shower HEAVY QUALITY ( L & K and equi.) (CSI No. 26.16h) |
| 102 | Providing and fixing 600 mm x 450 mm beveled edge mirror of Atul,Kiran makeglass with Indian polish 6.50 mm thick complete with back of 600 mm x 450 mm x 6 mm hard board sheet fixed to wooden cieats with C.P. brass screws and washers including supply of all materials, labour and T&P etc.required for proper completion of the work. (CSI No. 27.15) |
| 103 | Thorough cleaning of PVC TANK with bleaching powder and rubbing inside surface of OHT with jute and wire brush including cleaning and washing the surface with water including operation of tubewell and valves if required as per direction of E/I including cost of all materials, labour and T&P etc. required for completion of wrok. (OldCSI 22.38a) |
| 104 | Cutting down trees (exceeding 30 cm. grith)grubbing uproots,filling pits and levelling off ground,lopping branchestrimming removing (not exceeding 50 metres) and stackingserviceable materials and cleaning side.(CSI 22.12A) |
| 105 | Cleaning of inspection chamber including disposal of waste out side the UPPCL area as per direction of the Engineer-in-charge including cost of all labour,T&P etc.required for proper completion of the work.(CSI No. 20.13) |
| 106 | Supply and fixing of chromium polished iron fitting with screws for doors and windows etc. A to L (Old CSI 8.17 A to L) |
| 107 | L drops 16 mm dia x 300 long. |
| 108 | Tower bolts 10 mm dia x 250 mm long. |
| 109 | Tower bolts 10 mm dia x 100 mm long. |
| 110 | Iron hinges 100 mm size.12 gauge.thick |
| 111 | Iron door spring. |
| 112 | M.S.handles 100 mm size |
| 113 | M.S. chain kunda. |
| 114 | L-drop 16 mm dia x 200 mm long. |
| 115 | S/F of25 mm dia decorative curtain rod with decorative end caps, matching curtain rings, including fixing with necessary clamps, PVC gully, steel screws etc. complete. (Old CSI 8.19) |
| 116 | Providing and fixing false ceiling at all heights with integral densifiedr Armstrong false ceiling tiles of Size 595x595 x12 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as perBS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity < 0.043 W/m K as per ASTM 518:1991, in true horizontal level suspended on interlocking metal powder coated T-Grid of hot dipped galvanised iron section of 0.40 mm thick on Silhouette profile,rotary stiched double webbed white with 6 SUB HEAD : 26- NEW TECHNOLOGIES AND MATERIALS 1632 mm reveal profilewhite/black),comprising of main-T runners of size 15x42 mm of length 3000 mm, cross - T of size 15x42 mm of length 1200 mm and secondary intermediate cross-T of size 15x42 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in- Charge. 26.23.1 With 12 mm thick Armstrong MiniralFobre Sound Absorbing Sheet. (CSI No. 28.30) |
| 117 | Providing and fixing anodised alluminium grill (anodised transparant )or dyed to required shape according to is 1868 with minimum anodic coating of grade AC15.) of approved design /pattern with approved standard section and fixed to the existing window frame with cp brass/stainless steel screw @200mm centre to centre including cutting the grill proper opening size for fixing and operation of handle and fixing approved anodised alluminium standard section arround theopening ,all complete as per requirement and direction of engineer -in-charge (only weight of griil to be measured for payment ) |
| 118 | Supply and fixing brass polished hydraulic door closure of approved make & quality its fixing and adjustment with the help of screws, nuts and bolts including supply of all labour, T & P etc. required for proper completion of the work. (CSI No. 8.60) |
| 119 | Supply and Fixing of 5 blade Exhaust fan ventile air dx 225 mm of Havellsor equivalent make including all material, T&P etc required for proper completion of work as approved by engineer in charge.(CSI No. 28.38) |
| 120 | Supply & Fixing Chord less call bell of approved quality as per direction of Engineer in charge. (NSI) |
| 121 | Supply and fixing brass polished hydraulic door closure of approved make & quality its fixing and adjustment with the help of screws, nuts and bolts including supply of all labour, T & P etc. required for proper completion of the work. (CSI No. 8.60) |
| 122 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm ( + 0.05 %), total coated thickness with zinc coating 120 gm per sqm as per IS:277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (DSR 12.5) |
| 123 | Cleaning and sweeping of roof of residence as and when required including uprooting of rank vegetation and disposal of the garbage upto 50 M.(CSI No. 22.20) |
| 124 | Attending to petty maintenance service like plumbing service, welder service, mason service and carpenter service required as below.(CSI 22.18) |
| 125 | (b) Job attending by one no. Plumber/welder/mason/carpenter with two no. helper per hour or part of an hour. |
| 126 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge (CPWD 17.16a) |
| 127 | Providing and fixing false ceiling with 12mm thick plain/semi perforated or with design ceiling tiles of BWP type phenol formaldehyde synthetic resin bonded pressed particle board conforming IS:3087 finished with a coat of aluminium primer on both sides & edges and tow coats of synthetic enamel paint of approved quality on exposed face fixed to a grid made out of anodized aluminium (with 15 micron anodic coating) T-sections 35X15X1.5mm size main runners and cross runners 23.5X19X1.5mm fixed to main runners placed 600mm square. The frame work shall be suspended from ceiling by level adjusting hangers of 6mm diameter M.S. rod fixed to roof slab by means of ceiling cleats. The suspenders shall be placed 600X1200mm center to center including fixing to the frame with C.P. brace screws and applying a priming coat of zinc chromate yellow primer (aluminium frame work shall be paid separately) (Revsed rate 27.92/2014/OLD C.S.I. No. 16.03). |
| 128 | Providing and fixing double scaffolding system (cup lock type) on the exterior side, upto seven story hight made with 40 mm dia. M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc. wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in- Charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding. (NSI) |
