}

Increasing Capacity Of Transformers 250 To 400 Kva, 100 To 250 Kva, 63 To 100 Kva, 25 To 63 Kva In Different Villages Emanating From 33 / 11 Kv S / S Kapkote Under Kapkote Section Under Capital ( Si ) Head- 1 Cartage Of Transformer Of 400, bageshwar-Uttarakhand

Uttarakhand Power Corporation Limited-UPCL has published Increasing Capacity Of Transformers 250 To 400 Kva, 100 To 250 Kva, 63 To 100 Kva, 25 To 63 Kva In Different Villages Emanating From 33 / 11 Kv S / S Kapkote Under Kapkote Section Under Capital ( Si ) Head- 1 Cartage Of Transformer Of 400. Submission Date for this Tender is 24-08-2022. Brackets and Braces Tenders in bageshwar Uttarakhand. Bidders can get complete Tender details and download the document.




Tender Notice

33268983
Increasing Capacity Of Transformers 250 To 400 Kva, 100 To 250 Kva, 63 To 100 Kva, 25 To 63 Kva In Different Villages Emanating From 33 / 11 Kv S / S Kapkote Under Kapkote Section Under Capital ( Si ) Head- 1 Cartage Of Transformer Of 400
Open Tender
Indian
Uttarakhand
bageshwar
24-08-2022

Tender Details

Increasing Capacity Of Transformers 250 To 400 Kva, 100 To 250 Kva, 63 To 100 Kva, 25 To 63 Kva In Different Villages Emanating From 33 / 11 Kv S / S Kapkote Under Kapkote Section Under Capital ( Si ) Head- 1 Cartage Of Transformer Of 400 Kva Capacity From Store Centre Almora To Construction Site With Loading, Unloading At Both Points In Average Distance 125 Km. 2 Cartage Of Transformer Of 100 Kva Capacity From Store Centre Almora To Construction Site With Loading, Unloading At Both Points In Average Distance 125 Km. 3 Cartage Of Transformer Of 63 Kva Capacity From Store Centre Almora To Construction Site With Loading, Unloading At Both Points In Average Distance 125 Km. 4 Cartage Of Other Material ( Other Than Poles ) By Vehicle From Store Centre Almora To Nearest Construction Sitestore Including Loading & Unloading At Both Ends In Average Lead Distance 125 Km. 5 Head Load Cartage / Manual Shifting / Lifting With Crane / Hydra Of 400 Kva Transformers Along With Loading / Unloading At Both Points Up To 0 To 1 Km. 6 Head Load Cartage / Manual Shifting / Lifting With Crane / Hydra Of 250 Kva Transformers Along With Loading / Unloading At Both Points Up To 0 To 1 Km. 7 Head Load Cartage / Manual Shifting / Lifting With Crane / Hydra Of 100 Kva Transformers Along With Loading / Unloading At Both Points Up To 0 To 1 Km. 8 Head Load Cartage / Manual Shifting / Lifting With Crane / Hydra Of 63 Kva Transformers Along With Loading / Unloading At Both Points Up To 0 To 1 Km. 9 Head Load Cartage Of Small Material Including Loading & Unloading Upto 0 To 1 Km. 10 Dismentalling Of 250 Kva Transformers From Double Pole / Plinth Including Opening Of All Connections, Circutits & Earthing Strip Etc. 11 Dismentalling Of 100 Kva Transformers From Double Pole / Plinth Including Opening Of All Connections, Circutits & Earthing Strip Etc. 12 Dismentalling Of 63 Kva Transformers From Double Pole / Plinth Including Opening Of All Connections, Circutits & Earthing Strip Etc. 13 Dismentalling Of 25 Kva Transformers From Double Pole / Plinth Including Opening Of All Connections, Circutits & Earthing Strip Etc. 14 Cartage Of 250 Kva Transformers From Construction Site To New Construction Site With Loading, Unloading At Both Points In Average Distance 20 Km. 15 Cartage Of 100 Kva Transformers From Construction Site To New Construction Site With Loading, Unloading At Both Points In Average Distance 20 Km. 16 Cartage Of 63 Kva Transformers From Construction Site To New Construction Site With Loading, Unloading At Both Points In Average Distance 20 Km. 17 Installation / Mounting Of New 400 Kva Transformer On Plinth Pole Structure And Fixing Of Channel / Angle Etc And Making All Connection Of Ht And Lt Side And Its Complete Commissioning. 18 Installation / Mounting Of New 250 Kva Transformer On Plinth Pole Structure And Fixing Of Channel / Angle Etc And Making All Connection Of Ht And Lt Side And Its Complete Commissioning. 19 Installation / Mounting Of New 100 Kva Transformer On Plinth Pole Structure And Fixing Of Channel / Angle Etc And Making All Connection Of Ht And Lt Side And Its Complete Commissioning. 20 Installation / Mounting Of New 63 Kva Transformer On Plinth Pole Structure And Fixing Of Channel / Angle Etc And Making All Connection Of Ht And Lt Side And Its Complete Commissioning. 21 Fabrication Of Ms Channel Angle Iron After Cutting In Required Size With Driling Of Holes Upto Good Finish For Top Channel Breasing And Special Type Bracket Etc As Per Resspo Schedule And Local Approved Drawing. 22 Excavation Of Earth Of Size 2.1X2.1X1.2 Mtr For Construction Of Transformer Plinth With Size 2X2x1.1 Mtr Above Ground Level And 0.6 Mtr. Below Ground Level Inlcuding The Cost Of Material Such As Cement, Brick, Ballst, Sand Etc Complete Work And Tests Sa Per Standards. 23 Cement Concreting Work In Ration 1:4:8 For Construction Of Transformer Plinth. 24 Brick Work In 1:4 Ratio For Constuction Of Transformer Plinth. 25 Rr Massonary Work In 1:6 Ration For Construction Of Transformer Plinth. 26 Rcc Work Of 1:24 Ratio 15Cm Thickness For Construction Of Transformer Plinth. 27 Cement Plaster On Side Walls In 1:4 Ratio For Construction Of Transformer Plinth. 28 Chemical Earthing Of Distribution Transformer Including Digging Of Pit Of Size 2.5 Mtr Depth And Make Hole Of Size 150Mm. Placing Of Earthing Electrode ( To Be Supplied By Contractor As Per Drawing No A ) As Drawing B Connectiong The Same With Gi Strip Of Size 35X6 M As Per Drawing C For A Minimum Length 6 Mtr., Treatment Of Soil With Highly Conductive Substance As Per Is 30343 Complete In All Respects. Result Of Earthing Resistance To Be Recorded In Mb Before And After Installation Of Earthing. The Earth Resistance After Earthing Shlould Be Less Than 1 Ohm. 29 Erection Providing And Fixing Of Wire Mesh Of Size 50X35mm Around Plinth And Toe Wall Duly Welded With Frame Of Ms Angle Iron 35X35x6 Mm And Trip Of Size 35X6mm In Mid Of Earth Side Along With Wire Mesh ( Width Of Wire Mesh 1.5Mtr ) With The Height Of 0.5Mtr Above The Plinth And 02 Mtr Avoe The Toe Wall And 01 No Gate And Locking Arrangment In The Toe Wall Size Including Grouting Of 6 Nos Legs In The Ration In Block Of Size 0.25X0.25X0.45 Mtr Including Gravlling Of Shingle Of Size 20 To 40 Mm And Complete Painting Of Wire Mesh With Aluminium Paint With Two Coat ( Including The Cost Of Cement And All Material ) 30 Laying And Errection Of Lt Pvc Cable Including Crimping Of Lugs 1X70, 120, 150 Sqmm ( Including All Cost Of Material ) 31 Laying And Errection Of Lt Pvc Cable Including Crimping Of Lugs 1X240, 400 Sqmm ( Including All Cost Of Material ) 32 Back Head Load Cartage / Manual Shifting / Lifting With Crane / Hydra Of Transformer 250 Kva Along With Loading / Unloading At Both Points Upto 0 To 1 Km. 33 Back Head Load Cartage / Manual Shifting / Lifting With Crane / Hydra Of Transformer 25 Kva Along With Loading / Unloading At Both Points Upto 0 To 1 Km. 34 Back Head Load Cartage Of Small Material Including Loading & Unloading Upto 0 To 1 Km. 35 Cartage Of 250 Kva Transformer From Construction Site To Store Centre Almora With Loading And Unloading Both Points In Average Distance 125 Km. 36 Cartage Of 25 Kva Transformers From Construction Site To 33 / 11 Kv S / S Kapkote With Loading, Unloading At Both Points In Average Distance 20 Km. 37 Cartage Of Small Material ( Other Than Poles ) By Vehicle From Construction Site To 33 / 11 Kv S / S Kapkote Including Loading & Unloading At Both Ends In Average Distance 20 Km.

Key Value

Document Fees
INR 1180 /-
EMD
INR 48500.0 /-
Tender Value
INR 14.16 Lakhs /-
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail