Jammu And Kashmir State Agro Industries Development Corporation Limited has published Construction Of Warehouse And Industrial Storage Unit At Bari Brahmana, Jammu.. Submission Date for this Tender is 06-10-2022. Godown Tenders in Jammu Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 28-Jul-2022 | Corrigendum | Other | 09-08-2022 |
| 2 | 05-Aug-2022 | Corrigendum1 | Other | 09-08-2022 |
| 3 | 10-Aug-2022 | Extension004 | Date | 22-08-2022 |
| 4 | 23-Aug-2022 | CORRIGENDUM EXTENSION AND PAYMENT | Date | 05-09-2022 |
| 5 | 06-Sep-2022 | Corrigendum | Date | 16-09-2022 |
| 6 | 17-Sep-2022 | Extension | Date | 26-09-2022 |
| 7 | 27-Sep-2022 | corrigendum1 | Date | 06-10-2022 |
| Sl. No. | Item Description |
| 1 | Refrigeration System:- -Condensing Unit Dimensions (L X W X H) in mm -1030 X 432 X 1160 Air Flow (CFM) - 4000 No Of Fans/ Power Input - 2/106W CompressorMCC (A) - 19.5 Compressor LRA (A) - 69 (Each (X5)) -Evaporator 14” X 3 Fan (Each (X5)) -Copper Pipe + Insulation + Accessories 5Mtr (Each (X5)) -Temperature Controller (Dixell Make) (Each (X5)) -Expansion Valve (Each (X5)) -Refrigerant Gas R- 22 (8Kgs Each (X5)) -Wiring Indoor to Outdoor Qty (5 Mtr Each (X5)) -Drain Piping + Other Accessories (Each (X5)) -Electrical Panel for all machine (Each (X5)) -Grains Storage Dehumidifier (70 Pints for 4000Sqft) |
| 2 | Fumigation Equipment. Type of Product : Thermal Fogger Pressure in Fuel Tank : 0.06 Bar Battery : 4.1.5V Weight : 8.2Kg Tank Capacity : 16 Ltr. |
| 3 | MS Heavy Duty Trolly of loading capacity of 800 kgs each. |
| 4 | AFFF Based 9 kg Mechanical Foam Portable Fire Extinguisher |
| 5 | Weighing Equipment. Upto 200Kgs |
| 6 | Natural Industrial Wooden Pallet, Capacity: 1000-1500 kg, Dimension:1200 x 800 |
| 7 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres in all kinds of soil |
| 8 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 9 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 10 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 11 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete with Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 12 | Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete. |
| 13 | Centering and shuttering including strutting, propping etc. and removal of form for: Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 14 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including welding |
| 15 | Bed for upper structure in 1st class brick work and Cement Concrete bed 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) using 20mm nominal size stone aggregate with Kota Stone Flooring |
| 16 | Providing and fixing XPS Slab 75mm thick under Kota stone flooring above concrete bed for flooring insulation |
| 17 | Providing and Fixing Aluminium work for doors, windows, ventilators and partition with extruded built up standard tubular section/approximate Z-section and other section of approved make conforming to IS: 733 complete job.The item shall be executed 10 guage as per the direction of Engineer-in-charge.(Brown/Ivory) |
| 18 | Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength confirming to IS:4454 part-1 and M.S. top cover of required thickness for rolling shutters- 80x1.25 mm M.S. laths with 1.25 mm thick top cover |
| 19 | Providing and fixing ball bearing for rolling shutters. |
| 20 | Providing and fixing 60mm thick sandwich insulated puf panels for walls with 0.5 mm thick precoated/precoloured galvanised steel sheets on both sides with 50mm thick layer polyurethane foam (density 40 +-2 kg/m3) insulation manufactured on continous line. The wall panel shall be joined with tongue and groove joint with all accessories like U-flashing, L-flashing made up of PPGI Sheet of thickness 0.5mm. The top finished surface shall have guard film/protection sheet for protection against scratches during handling and transportation complete in all respects to entire satisfaction of Engineer in charge. Nothing extra shall be paid for wastage. |
| 21 | Providing and fixing 50mm thick sandwich insulated puf panels for truss roof with 0.5 mm thick precoated/precoloured galvanised steel sheets on both sides with 50mm thick layer polyurethane foam (density 40 +-2 kg/m3) insulation manufactured on continous line. The wall panel shall be joined with tongue and groove joint with all accessories like U-flashing, L-flashing made up of PPGI Sheet of thickness 0.5mm. The top finished surface shall have guard film/protection sheet for protection against scratches during handling and transportation complete in all respects to entire satisfaction of Engineer in charge. Nothing extra shall be paid for wastage. |
| 22 | Providing and fixing 100A TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required. |
| 23 | Supplying and fixing 10A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 24 | Supplying and Fixing 15W LED Bulbs with holder of approved brand |
| 25 | Supplying and Fixing 1200mm sweep ceiling fans with down rods of length (upto 30 cm) |
| 26 | Supplying and Fixing 10 A Switch of approved brand |
| 27 | Supplying and Fixing 10 A Socket of approved brand |
| 28 | Supplying and Fixing 20 A Switch of approved brand |
| 29 | Supplying and Fixing 20 A Socket of approved brand |
| 30 | Supplying and Fixing 3 Module- Modular box with plate inclusive of GI box/gang box as applicable |
| 31 | Supplying and Fixing 12 Module- Modular box with plate inclusive of GI box/gang box as applicable |
| 32 | Supplying and Fixing PVC Conduits Pipes 25mm dia of approved brand along With Accessories in Surface Including Cutting the Wall And Making Good the same In Case of recess Conduit as Required 20mm. |
| 33 | Supplying and Fixing PVC Conduits Pipes Bends of approved brand |
| 34 | Supplying and Fixing PVC Tee Cover of approved brand |
| 35 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required |
| 36 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 2.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 2.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required |
| 37 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 6 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 6 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required |
| 38 | Supplying and Fixing DB Box/Sheet Steel |
| 39 | Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, wiring and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required, complete in all respects |
| 40 | Supplying and Fixing tie belt 300mm length |
| 41 | Supplying and Fixing 100A Changeover |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
