Providing And Laying Of 700 Mm Dia Rising Main Near Jahangir Puri Drain To Phase Iii Stp At Coronation Pillar Re Invite
Tender Value
Ref. Documents
Estimated cost
Bid Submission
02 Aug 2022
0 days left
EMD
49900
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Providing And Laying Of 700 Mm Dia Rising Main Near Jahangir Puri Drain To Phase Iii Stp At Coronation Pillar Re Invite
BOQ
| Sl. No. | Item Description |
| 1 | Laying of Double Flanged (Screwed/ Welded) Centrifugally 700 mm dia Ductile Iron pipe class K-9 Conforming to IS : 8329Double Flanged. The rising main is to be laid over the Jahangir Puri Drain |
| 2 | Providingof Ductile Iron Pipe Class K-9 flanges and welding 700 mm dia |
| 3 | Providing and laying D.I. Specials of Class K - 12 suitable for mechanical jointing as per IS : 9523 :18.69.2 Above 600 mm dia quintal |
| 4 | Providing & erecting1.60 `m ht c.g.i. sheet barricading supported on safeda ballies,100 mm dia,2.0 m ht placed at2.5 m c/ccorrugated GI sheetsfixing with nail of required length and dia to safeda ballies including excavating holes size of 0.30*0.30*0.40 m, getting out the excavation soil and then returning the soil i/c consolidating by ramming, watering etc, all completeincludingdisposal of surplus excavated earth within a lead of 50.0 m and lift upto1.5 m and painting on full surface of CGI Sheet (on one side with bright paint of red and white colour in vertical strips 0.30 m wide alternatelyasdirected by Engineer in charge. (The barricading dismantled on completion of the work shall remain the property of contractor) |
| 5 | Hire charge of mechanical excavator for excavation of earth pit at site of work as per site requirement and refilling the same after completion of work, including diesel, mobile oil & lubricants etc as per site requirement. |
| 6 | Hiring of long boom crane capacity 20 ton with fuel operator and helper for shifting, lowering, balancing andholdingthe M.S. Gap Piece & other works as required at site. |
| 7 | Hiring of 62 KVA D.G. set with fuel & operator for welding works and other works as required at site. |
| 8 | Dewatering of sewage water of the burst rising main with the help of suitable size of sewage submersible pump, delivery pipe & other consumables at suitable place.(approx KL) |
| 9 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) (DSR Civil 2021: item codein DSR-4.1.3) 2X2X2X3.5=28.00CUM |
| 10 | 12 mm cement plaster of mix : 1:4 (1 cement : 4 fine sand) 2X2X3XX3.5=42.00SQM |
| 11 | SLUICE VALVE:-cast iron double flanged manually operated sluice valve nerally conform to IS:14846 having body, door, dome, gland in graded cast iron to IS:210, Gr.Fg.260, four faces of SS ASTM A743 Gr.CF8 and spindle nut of leaded tin bronze to IS:318, outside screwed rising stainless steel AISI:431 spindle. Valves of size 350mmø and above will be with BTB and gear box arrangement for ease in operation. Valves to be tested by closed end method only. Flanges to be drilled as per IS:1538 Part-IV & VI. Valves are suitable for hydrostatic test pressure of 10Kg./Cm2 for seat and 15Kg./Cm2 for body(PN-1 rating) 700 mm dia |
| 12 | Dismantling of 200 mm & 450 mm DI pipe. |
| 13 | Providing of 150 mm CI Sluice Valve |
| 14 | Providing of 150 mm CI Air Valve |
| 15 | Providing and fixing MS Dismantling joints of pressure rating PN:1.6 with both side flange end suitable for installation in between flange end pipes (700 mm dia) |
| 16 | M.S. Pipe 200 mm dia |
| 17 | Fixing of 150 MM dia sluice valve and Air Valveetc. |
| 18 | Testing and commissioning of rising main on full pressure and as per satisfaction of Engineer In-charge. |
AI Tender Summary
Tender Timeline
Jul 25, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedAug 02, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 02, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender