Military Engineer Services-MES has published Comprehensive Maint Of Borewells And Tubewells In Sector B And Centifugal Pumps Submerisible Pumps Lt Panels Amf Panels Of Tws Including All Connected Items In Sector C Under Ge Utility Ambala Cantt. Submission Date for this Tender is 23-08-2022. Electrical Panel Tenders in ambala Haryana. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 16-Aug-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 23-08-2022 |
| Sl. No. | Item Description |
| 1 | Disconnecting all electrical connections from electric motor of capacity 120 HP installed at sec "C" and decoupling from pump assembly and dismantling from foundation and transporting to local workshop approved by Accepting Officer for opening the motor taking out of burnt winding and thorough by cleaning of the slotes, rewinding the complete motor with super enamaled copper wire of same size and provn of supper quality insulating materials, warnishing, replacing the bearing sets and cooling fans if required and drying and taking back from wksp including laths and other any type of machine work such as rotor work, welding, metalling, machining and grinding for bearing seat etc and mounting, connecting all electrical connections alongwith reassembling pump set and testing complete all as specified and directed by Engr-in-Charge. NOTE: Rewinding amount of motor will be paid to the contractor once, only irrespective of how many number of times motor rewinded. |
| 2 | All as per item no. 1 here in before but 75 HP motor and ditto- |
| 3 | All as per item no. 1 here in before but 60 HP motor and ditto- |
| 4 | All as per item no. 1 here in before but 50 HP motor including 03 Nos vertical turbine motor and ditto- |
| 5 | All as per item no. 1 here in before but 40 HP motor and ditto- |
| 6 | All as per item no. 1 here in before but 30 HP motor and ditto- |
| 7 | All as per item no. 1 here in before but 25 HP motor and ditto- |
| 8 | All as per item no. 1 here in before but 10 HP motor and ditto- |
| 9 | All as per item no. 1 here in before but 10 HP sludge motor and ditto- |
| 10 | All as per item no. 1 here in before but 7.5 HP sludge motor and ditto- |
| 11 | All as per item no. 1 here in before but 5 HP motor and ditto- |
| 12 | Decoupling of centrifugal pump/Raw water turbine pumpfrom electric motor, dismantling from the foundation and shifting to local workshop approved by Accpeting Officer for opening the pumps for checking and rectification of defects by welding/threading/cutting/replacing defective parts which shall be measured and paid separately as supply only, herein after including transporting back and refixing and testing the same complete for Model No : DSM 125/40 Make: Kirloskar all as specified and directed. |
| 13 | All as per item No.2 here in before but for Model No : DSM 100/36 Make: Kirloskar |
| 14 | All as per item No. 2 here in before but for Model No : DB 125/26 Make: Kirloskar |
| 15 | All as per item No.2 here in before but for Model No : UP 80/38Make: Kirloskar or Raw water turbine pump |
| 16 | All as per item No. 2 here in before but for Model No : SCT 80/38 Make: Kirloskar |
| 17 | All as per item No. 2 here in before but for Model No : SP4LA Make: Kirloskar |
| 18 | All as per item No.2 here in before but for Model No : 4/5 2STGMEDIMKI Make: Mather Platt/Vacuum Centrifugal Pump |
| 19 | Supply and fixin replacement/ repair upper half & Lower half casing with axially split volute design with suction and discharge flanged of existing size of horizontal split casing type centrifugal pump including welding/threading/cutting wherever if required and its studs, nut, bolts, washers, cylindrical pin and gasket etc Model No : DSM 125/40 Make: Kirloskar. |
| 20 | All as per item No. 3 here in before but CI impeller with bush bed |
| 21 | All as per item No. 3 here in before but Pump Shaft |
| 22 | All as per item No. 3 here in before but Wear Ring |
| 23 | All as per item No.3 here in before but Shaft Sleeve DE/NDE and its O Ring |
| 24 | All as per item No. 3 here in before but Lentern Rung, Oil seal & O Ring |
| 25 | All as per item No. 3 here in before but Complete stuffing box with insert DE&NDE, bearing DE&NDE, bearing housing DE&NDE,bearing sheet, shoulder rings, grease nipple, Gland packing with its studs and Hexa nuts and all its connected items. |
| 26 | All as per item No.3 here in before but Impeller Key and its connected item |
| 27 | Supply and fixin replacement/ repair upper half & Lower half casing with axially split volute design with suction and discharge flanged of existing size of horizontal split casing type centrifugal pump including welding/threading/cutting wherever if required and its studs, nut, bolts, washers, cylindrical pin and gasket etc Model No : DSM 100/36. |
| 28 | All as per item No. 4 here in before but CI impeller with bush bed |
| 29 | All as per item No.4 here in before but Pump Shaft |
| 30 | All as per item No. 4 here in before but Wear Ring |
| 31 | All as per item No. 4 here in before but Shaft Sleeve DE/NDE and its O Ring |
| 32 | All as per item No. 4 here in before but Lentern Rung, Oil seal & O Ring |
| 33 | All as per item No. 4 here in before but Complete stuffing box with insert DE&NDE, bearing DE&NDE, bearing housing DE&NDE, bearing sheet, shoulder rings, grease nipple, glandpacking with its nuts and all its connected items |
| 34 | All as per item No. 4 here in before but Impeller Keyand its connected item |
| 35 | Supply and fixin replacement/ repair upper half & Lower half casing with axially split volute design with suction and discharge flanged of existing size of horizontal split casing type centrifugal pump including welding/threading/cutting wherever if required and its studs, nut, bolts, washers, cylindrical pin and gasket etc Model No : DSM 125/26 |
| 36 | All as per item No. 5 here in before but CI impeller with bush bed |
| 37 | All as per item No. 5 here in before but Pump Shaft |
| 38 | All as per item No. 5 here in before but Wear Ring |
| 39 | All as per item No. 5 here in before but Shaft Sleeve DE/NDE and its O Ring |
| 40 | All as per item No. 5 here in before but Lentern Rung, Oil seal & O Ring |
| 41 | All as per item No. 5 here in before but Complete stuffing box with insert DE&NDE, bearing DE&NDE, bearing housing DE&NDE, bearing sheet, shoulder rings, grease nipple, Gland packing with its studs and Hexa nuts and all its connected items |
| 42 | All as per item No. 5 here in before but Impeller Keyand its connected item |
| 43 | Supply and fixin replacement/ repair upper half & Lower half casing with axially split volute design with suction and discharge flanged of existing size of horizontal split casing type centrifugal pump including welding/threading/cutting wherever if required and its studs, nut, bolts, washers, cylindrical pin and gasket etc Model No : UP 80/38Make: Kirloskar or Raw water turbine pump. |
| 44 | All as per item No. 6 here in before but CI impeller with bush bed |
| 45 | All as per item No. 6 here in before but Pump Shaft |
| 46 | All as per item No. 6 here in before but Wear Ring |
| 47 | All as per item No. 6 here in before but Shaft Sleeve DE/NDE and its O Ring |
| 48 | All as per item No. 6 here in before but Lentern Rung, Oil seal & O Ring |
| 49 | All as per item No. 6 here in before but Complete stuffing box with insert DE&NDE, bearing DE&NDE, bearing housing DE&NDE, shoulder rings, bearing sheet, grease nipple, Gland packing with its studs and Hexa nuts and all its connected items |
| 50 | All as per item No.6 here in before but Impeller Keyand its connected item |
| 51 | Supply and fixin replacement/ repair upper half & Lower half casing with axially split volute design with suction and discharge flanged of existing size of horizontal split casing type centrifugal pump including welding/threading/cutting wherever if required and its studs, nut, bolts, washers, cylindrical pin and gasket etc Model No : SCT 80/38. |
| 52 | All as per item No. 7 here in before but CI impeller with bush bed |
| 53 | All as per item No. 7 here in before but Pump Shaft |
| 54 | All as per item No. 7 here in before but Wear Ring |
| 55 | All as per item No. 7 here in before but Shaft Sleeve DE/NDE and its O Ring |
| 56 | All as per item No. 7 here in before but Lentern Rung, Oil seal & O Ring |
| 57 | All as per item No. 7 here in before but Complete stuffing box with insert DE&NDE, bearing DE&NDE, bearing housing DE&NDE, shoulder rings, beaing sheet, grease nipple , Gland packing with its studs and Hexa nuts and all its connected items |
| 58 | All as per item No. 7 here in before but Impeller Keyand its connected item |
| 59 | Supply and fixin replacement/ repair upper half & Lower half casing with axially split volute design with suction and discharge flanged of existing size of horizontal split casing type centrifugal pump including welding/threading/cutting wherever if required and its studs, nut, bolts, washers, cylindrical pin and gasket etc Model No : SP4LA |
| 60 | All as per item No. 8 here in before but CI impeller with bush bed |
| 61 | All as per item No. 8 here in before but Pump Shaft |
| 62 | All as per item No. 8 here in before but Wear Ring |
| 63 | All as per item No. 8 here in before but Shaft Sleeve DE/NDE and its O Ring |
| 64 | All as per item No.8 here in before but Lentern Rung, Oil seal & O Ring |
| 65 | All as per item No. 8 here in before but Complete stuffing box with insert DE&NDE, bearing DE&NDE, bearing housing DE&NDE, shoulder rings, bearing sheet, grease nipple , Gland packing with its studs and Hexa nuts and all its connected items |
| 66 | All as per item No. 8 here in before but Impeller Keyand its connected item |
| 67 | Supply and fixin replacement/ repair upper half & Lower half casing with axially split volute design with suction and discharge flanged of existing size of horizontal split casing type centrifugal pump including welding/threading/cutting wherever if required and its studs, nut, bolts, washers, cylindrical pin and gasket etc Model No : 4/5 2STGMEDIMK. |
| 68 | All as per item No. 9 here in before but CI impeller with bush bed |
| 69 | All as per item No. 9 here in before but Pump Shaft |
| 70 | All as per item No. 9 here in before but Wear Ring |
| 71 | All as per item No. 9 here in before but Shaft Sleeve DE/NDE and its O Ring |
| 72 | All as per item No.9 here in before but Lentern Rung, Oil seal & O Ring |
| 73 | All as per item No. 9 here in before but complete stuffing box with insert DE&NDE, bearing DE&NDE, bearing housing DE&NDE, shoulder rings, bearing sheet, grease nipple, Gland packing with its studs and Hexa nuts and all its connected items |
| 74 | All as per item No. 9 here in before but Impeller Key and its connected item |
| 75 | Scraping old existing paint from Pump Set of cap. 5 to 120 HP, motor and channel including making smooth surface by filling putty and applying two coat of synthetic enamel paint of approved colour as directed by Engr-in-charge. |
| 76 | Scraping old existing paint from pipe of any dia in installations including making smooth surface by filling putty and applying two coat of synthetic enamel paint of approved blue colour incl marking of inlet/outlet etc with the help of white colour as directed by Engr-in-charge. |
| 77 | Supply & fixing in replacement electronic motor protection relay fully protection from over current, under current, Phase loss, Phase reverse, Auto/manual reset input 1A to 5A through CT adjustable Trip complete suitable capacity for upto 120 HP motor starter including taking down all as specified and directed. |
| 78 | Supply & fixing of rubber coupling TC-13, TC-14, TC-19, TC-22 and as per existing required for centrifugal pump sets complete including taking down all as specified and directed by Engr-in-Charge. |
| 79 | Supply and fixing of metal coupling for centrifugal pump sets complete suitable for existing pump sets including taking down all as specified and directed by Engr-in-Charge. |
| 80 | Repairing the LT control starter panel/AMF panel of the centrifugal pump and motor by disconnecting the cable, removing u/s parts of the panel, wiring and replacement of u/s wiring and parts under respective items including cleaning by vacuum cleaner, thimble, testing the panels on load complete all as specified and as directed by Engr-in-Charge. |
| 81 | Supply, fixing and replacement of Power contactor3 pole MNX 25 or MC10DN, series A1, AC3,40A,for 25HP/30HPAC rating 40 Amp, 220 V complete suitable for existing starter including taking down all as specified. |
| 82 | Supply, fixing and replacement Power contactor3 pole, MNX A1-A2, 30 KW and 40 KW AC rating upto 80 Amp, 220 V complete suitable for existing starter all as specified. |
| 83 | Supply, fixing and replacement Power contactor3 pole, MNX 70, 45 KW AC rating upto 80 Amp, 220 V complete suitable for existing starter all as specified. |
| 84 | Supply, fixing and replacement Power contactor3 pole, BCH MCE15M, series A1, 75 HP AC rating upto 100 Amp, 220 V complete suitable for existing starter all as specified. |
| 85 | Supply, fixing and replacement Power contactor3 pole, BCH MCE15M series A1, AC3,110A 120 HP AC rating upto 150 Amp, 220 V complete suitable for existing starter all as specified. |
| 86 | Replacement of the unserviceable timer switch type ST 100 suitable for240 Volts with mounting kit of capacity 3-30Sec, 50 Hz complete as as specified and directed. |
| 87 | Supply, fixing and replacement of Single phase preventor/Phase sequence corrector for upto 120 HP motor or AC rating upto 160 Amp, 415 VAC, 50 Hz (VSP2) complete suitable for existing starters all as specified. |
| 88 | Supplying, laying, jointing and testing in replacement of existing size with PVC insulated multi strand copper conductor flat type of size 25 sqmm, 3 coresubmersible cable and connected with suitable and required thimbles and nut bolts to panels. Make: Finolex/Havells/Polycab/Grandlay/RR Kabel |
| 89 | All as per srl item No. 23 here in before but 16 Sqmm, 3 core. |
| 90 | All as per srl item No. 23 here in before but 10 Sqmm 3 core. |
| 91 | Rewinding of submersible motor of 50 HP capacity with super enameled insulated copper wire as per existing gauge with other winding material including cleaning of stator, slots replacement of defective components and parts including taking down complete all as directed by the Engr-in-Charge. |
| 92 | All as per item No. 24 here in before but motor 20 HP Capacity |
| 93 | Supply only Gun metal impeller with key and distance bushes for 50 HP Cap motor/submersible pump. |
| 94 | All as per item No. 25 here in before but Pump shaft of stain less steel for 50 HP Capacity |
| 95 | All as per item No.25 here in before but Motor bush of gun metal upper & lower for 50 HP |
| 96 | All as per item No. 25 here in before but Rotar bearing stainless steel sleeve upper & lower for 50 HP Cap |
| 97 | All as per item No. 25 here in before but Coupling arrangement with key for motor pump 50 HP Cap |
| 98 | All as per item No. 25 here in before but Sand guard for submersible pump set for 50 HP Cap |
| 99 | All as per item No. 25 here in before but Thrust bearing assembly for submersible pump set motor cap 50 HP. |
| 100 | All as per item No. 25 here in before but Lower, housing for submersible pump set for the capacity of 50 HP motor. |
| 101 | All as per item No. 25 here in before but Neck ring for submersible pump set of 50 HP capacity motor. |
| 102 | All as per item No. 25 here in before but Bowl bush of gun metal 50 HPCap motor |
| 103 | Material & Labour for replacement of old/UNSV base frame of centifugal pump set made out of angle iron of size ISA 5050, 50x50x6mm or medium channels of size MC-100including cutting, drilling hole or welding work required to make desired shape or existing size duly painted with one coat of primer red oxide and two coat of enamel paint all as specified and directed by the Engr-in-Charge. Note: The base frame should be grouted complete in PCC foundation and should be taken necessary bearing strength before the installation of induction motor. |
| 104 | Dismantlling & openingbooster pump for repairing, making the same functional including installation & testing, complete all as directed by Engineer-in-charge. Note :(a) Required spare parts shall be measured and paid separately as supply only under the respective items (b) Make of spare parts shall be same as of booster pump. |
| 105 | Supply only shaft bush of booster pump suitable upto 5 HP |
| 106 | Supply only ball bearing suitable for pump upto 5 HP. |
| 107 | Supply only bronze impeller. |
| 108 | Supply only stainless steel shaft keys. |
| 109 | Supply and fixing in replacement of cast iron Non return valve with foot valve (flanged) reflux 250mm nominal bore ISI marked conforming to IS-5312 including rubber/fiber board gasket , nuts, washers etc including taking down old unserviceable Non return valve (flanged) reflux complete all as specified and directed by Engr-in-Charge. |
| 110 | All as per item No. 28 here in before but 200 mm bore |
| 111 | All as per item No. 28 here in before but 150 mm bore |
| 112 | All as per item No. 28 here in before but 100 mm bore |
| 113 | Supply and fixing in replacement of monoblock pump set of capacity upto 5 HP electric motor 3 phase 415 Volt and making all connection complete all as specified and directed by Engr-in-Charge. Make:Kirloskar , NOTE: Contractor shall deposit all the replaced parts to the MES store. |
| 114 | Taking out US Centrifugal pump set of capacity upto 60/50 HP and deposit to MES Store and supply and fixing new centrifugal pump set including motor as per existing motor and connections,connected items with suitable 3 Phase star delta starter complete set (Motor Horizondal Split casing pump model DSM125/26 ) including CI connection with CI impeller 40 C8- shaft complete set of capacity 60/ 50 HP including all connected items and foundation allignmentall as specified and directed by the Engr in Charge. |
| 115 | M & L for PCC 1:3:6type C2 using 40 mm graded aggregate for foundation of suitable size or as per site requirement including demolition of old PCC foundation complete all as specified and directed by Engr-in-Charge. Note : The debris after demolition of PCC should be removed complete and spread to area where directed by incharge. |
| 116 | Supply and fixing in replacement of MCCB TPN 36KA breaking capacity 250Amp, 415 V adjustable type complete all as specified and directed. |
| 117 | All as per Sl item No 32here in before but 200 Amp and ditto---- |
| 118 | All as per Sl item No 32 here in before but 160 Amp and ditto---- |
| 119 | All as per Sl item No 32here in before but 125 Amp and ditto---- |
| 120 | All as per Sl item No 32here in before but 100 Amp and ditto---- |
| 121 | Dismantling complete GI slotted Pipe from Alum Chambers and replacement of new GI (slotted) Pipe of size 20mm - 75 RM, including angle iron (100 Kg), PVC pipe 50 RM, painting, welding of mixer and its existing angle iron, repairing of mixer and rewinding of motors(04 Nos) complete as specified and directed by Engr-in-Charge. |
| 122 | Supply and fixing in replacement of submersible dewatering pump single phase 2 HP, 230 V, 50 Hz suitable for 300 RPM at 12 Mtr head complete including 20 RM twin core copper 2.5 sqmm cable flat type all as specified and directed by Engr-in-Charge. Note: Old pump should be deposited in MES store. |
| 123 | Supply, Installation, commissioning and testing automatic star Delta starter, suitable for capacity 120HP/90KW, 3 phase covered with thick sheet metal cover including all fixing arrangements on wall with nuts, bolts electrical connection andtesting etc including taking down complete all as specified and directed. |
| 124 | All as per item No 35 here in before but suitable for capacity 50HP/37.5KW |
| 125 | All as per item No 35 here in before but suitable for capacity 30HP/22.5KW |
| 126 | All as per item No 35 here in before but suitable for capacity 25HP/18.5KW |
| 127 | Supply, installation, testing and commissioning LT panel in replacement of suitable size as per IE rule and latest IS, factory made dust and vermin proof indoor type made out of 2 mm thick CRCA sheet including seperate compartment for each MCCB & for cable and busbar, mounted on frame of MS angle iron 40mmx40mmx6 mm with front and back openable door with lock & Key including necessary grouting and double coat powder coated of grey colour painting complete with following accessories.The degree of protection of panel shall be IP-54. Note :- (i) Above item 36 rate incl all items required for supply, installing , testing and commissioning of LT panel such as any no of contactor of suitable capacity required in star delta starter, time relay, single phase preventor, single pole MCB required for safety , thimbles, end joining kit etc complete all.The quoted rate shall include minor items such as lugs, nuts & bolts, washers, top insulators, sleeves, provision of extra holes in bus bar etc. (ii) All internal wiring shall be done with suitable size of PVC insulated solid copper conductor FRLS cable conforming toIS-694. (iii) Panel drawing shall be got approved before placing of orderfrom Engr-in-Charge/GE. (iv) The bus connection for cable from main bus bar to outgoing MCCB will be connected through suitable rating bus bar strip type duly insulated. (v) Cable will be entered in panels through gland. (vi) Cost of marking description and matter on the front door as specified and directed by Engr-in-Charge is incl in quoted rate. |
| 128 | INCOMING: (i) 4 pole MCCB 630 Amp, 36 KA rupturing capacity - 1 No |
| 129 | (ii) Aluminium bus bar 3 phase 4 strip suitable for 1000 Amps current carrying capacity complete with post insulators and heat shrinkable sleeves. |
| 130 | (iii) 320 amps manual changeover switch, 4 pole, 415 volts. |
| 131 | (iv) Phase indicating lights & control fuses -1 Set |
| 132 | (v) Voltmeter (0-500V) range with selector switch - 1 Set |
| 133 | (vi) Amp meter (0-500A) range with C.T.S. of suitable size and selector switch - 1 Set |
| 134 | OUTGOING: (i) 4 pole, MCCB 320 Amps,25 KA breaking capacity with automatic star delta starter provided with suitable size contactor, overload relay , single phase preventor etc suitable for 100HP centrifugal pump set complete- 03 Nos |
| 135 | (ii) 4 pole, MCCB 160 Amps,16 KA breaking capacity with automatic star delta starter provided with suitable size contactor, overload relay , single phase preventor etc suitable for 25HP centrifugal pump set complete- 03 Nos |
| 136 | (iii) 4 pole, MCCB 63 Amps,16 KA breaking capacity with automatic star delta starter provided with suitable size contactor, overload relay , single phase preventor etc suitable for 10 HP centrifugal pump set complete- 02 Nos |
| 137 | (iv) 4 pole, MCCB 32 Amps,16 KA breaking capacity with DOL starter suitable for 05 HP vaccum pump set - 01 Nos |
| 138 | (v) SPN MCB 32 Amps,16 KA breaking capacity- 02 Nos(01 Spare) |
| 139 | (vi) 4 pole, MCCB 320 Amps,25 KA breaking capacity |
| 140 | (vii) RYBindication lamp -06 No. |
| 141 | (viii)Voltmeter digital type of size 4"x4" with inbuilt selector switch 0-500 Volts, 3 phase accuracy class 0.5 CL, 50 Hz flush mounted square pattern -09 Nos |
| 142 | (ix) Ammeter digital type of size 4"x4" with inbuilt selector switch 0-200 Amp accuracy class 0.5 CLsuitable for 3 Phase, LT, 50 Hz system flush mounted square pattern and set of three CTsof suitable rating with all the outgoing feeder-09 Nos |
| 143 | Dismantling the Rotary twin-lobe blower/oil type compressor 1000cum/hr @ 4000mmWC from the foundation and shifting it to local workshop approved by accepting officer for servicing/repairing of connected items, cleaning the air filter, lubricating the mechanical parts like lobes, gears, bearings(replacing the bearings if required) etc and filling the lub oil of Servo system 320 of IOC and ENCLO-320 of HPCL-03 ltrs, supply & fixing in replacement of a air cleaner filter of air blower and transporting back to SYL plant and refixingat the same place including connecting all electrical connections and V- belt and testing complete all as specified and directed by Engr-in-charge. |
| 144 | Material & labour in replacement indoor type LT control panel 3 phase 4 wire 415 V, 50 Hz of size 1.2 mtr x 1.5 mtr x 0.45 mtr deep made out of CRCA sheet of size 2 mm thick. The panel has compartement type for fixing the accessories and the panel has front openable . The panel will be IP 54 protection and lockable with chromium plated 19 mm dia fancy locks having lovers and air vent gasket for natural flow of air.The panel should have aluminium bus bar 1.5 times the rated capacity of incoming MCCB and colour coded on the bus bar and shrinkable sleeve on the bus bar to withstand high resistance. The panel have interconnection of main bus bar and outgoing bus bar. The cubical shell have a bottom channel of size 75x40 mm duly coated with zinc metal. The panel shall be powder coated. The panel comprising space for installing two Nos star delta starter of suitablbe size for 25HP pumpset. |
| 145 | IncomingMCCB 100 Amp 36 KA, TPN-01 No |
| 146 | Change over switch on load type 125 Amp 4 pole 415 Volts-01 No. |
| 147 | Outgoing MCCB 63 Amp 25 KA, 415 Volts, TPN-02 Nos |
| 148 | Digital voltmeter suitable upto 415 volts-01 No. |
| 149 | Digital Ammeter suitable upto 200 Amp-01 No. |
| 150 | LED indicator lamp-01 Set. |
| 151 | Automatic star delta starter suitable for 25 HP pumpset: 01 Nos |
| 152 | Supply and fix in replacement of DOL starter for motor pump set upto 5HP all as specified and directed by Engr- In- charge |
| 153 | Material & Labour in replacement of including taking down old with new earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick, buried directly in ground vertically to a depth not less than 2.25 mtr deep below ground level with top edge of the plate not less than 1.5 mtr below normal ground level, filled around with layer of char coal dust and salt and connected to GI earth strip 32 x 6 mm by means of bolt, nut and check nuts and washers of galvanzied iron or steel and other end of the earth strip, connected to test point/equipment/panel and protected by galvanized iron pipe light grade 50mm bore and watering pipe 20mm dia light grade with funnel and wire mesh, PCC 1:3:6 in chambers, RCC 1:2:4 in pit cover reinforced with 6mm dia deformed bars @ 15cm centre to centre both way including necessary excavation & earth work as directed complete all as shown in electric plate No. 5 of SSR Pt-I. PCC chambers shall be constructed at leasts 1.5 mtr away from the earth electrode and pipe for watering. Note:- Earthing shall be tested after execution. Payment shall only be made after satisfactory result. |
| 154 | Material & Labour for uppering of column pipe alongwith submersible pump set with 2 nos submersible cable from bore hole of tube well with the help of chain pulley block or tripod located in different location by dismantling nut bolts and rubber gaskets and lowering down the same by refixing nuts, bolts and new rubber gaskets complete all as specified and directed by Engineer in charge. |
| 155 | Taking out the pumpset and transportation for repairing motor pump set to workshop, taking out burnt winding wire from submersible motorof capacity 50 HP 3 phase ,rewinding with suitable size of PVC coated copper winding wire including replacement of burnts bushes complete including all insulation material and transportation back to site and fixing the same, testing and commissiong complete all as specified and directed by Engineer in charge : Note: (i) Any fault such as short circuit, earth fault, burning of submersible cable due to unbalance load or any other reason occur in the motor after repair during the currency of contract will be bear by the contractor and rates are deemed to be included in the item for rectification of the fault. (ii) Spares for replacement will be measured and paid separately under respective items |
| 156 | All as per srl item No. 42.00 here in before but of capacity 40 HP |
| 157 | Material & labour in replacement of bearing bush for submersible motor of capacity 40hp to 50 hpcomplete all as specified and directed by Engineer in charge. |
| 158 | All as per srl item No. 44.00 here in before but rotor sleeve for submersible motor. |
| 159 | All as per srl item No.44.00 here-in here in before but thrust bearingfor submersible motor. |
| 160 | All as per srl item No. 44.00 here-in before but thrust plate for submersible motor. |
| 161 | All as per srl item No. 44.00 here-in before but motor coupling with key for submersible motor. |
| 162 | All as per srl item No. 44.00 here-in before but water drain plug for submersible motor. |
| 163 | All as per srl item No. 44.00 here-in before but upper bearing housing assembly for submersible motor. |
| 164 | Material and labour for strip opening ofsubmersible pump set complete of capacity 50 HP and replacing defective parts, removing iron scales cleaning the serviceable parts and re-assembling in existing state after carrying out necessary repair / replacement of worn out defective parts and making serviceable and testing on full load complete all as specified and directed. Note: Spares for replacement will be measured and paid separately under respective items. |
| 165 | All as per srl item No. 45.00 here in before but of capacity 40 HP |
| 166 | Material & labour in replacement of bronze impeller of submersible pump capacity 40hp to 50 hp complete all as specified and directed by Engineer in charge. |
| 167 | All as per srl item No. 46. here in before but neck ringfor submersible pump. |
| 168 | All as per srl item No. 46 here-in before but distance sleeve stainless steel for submersible pump. |
| 169 | All as per srl item No. 46 here-in before but pump shaft for submersible pump. |
| 170 | All as per srl item No.46 here-in before but NRV body with accessories for submersible pump. |
| 171 | Supply, lowering, jointing, against replacement of unserviceable GI pipe heavy duty 100mm internal dia 3 mtr long with both ends threaded and fitted with heavy duty MS flanges 14mm thick, two Nos groves for submersible cable continuous welded and drilled 4 Nos hole, completeas column pipeincluding jointing material such as bolts, nuts, washers and rubber gasket etc complete all as specified and directed. |
| 172 | Material and labour in replacement of rotor for submersible motor of capacity 40 HP to 50 HPcomplete all as specified and directed by Engineer in charge. |
| 173 | Material and labour in replacement of stator for submersible motor of capacity 40 HP to 50 HPcomplete set with all connected items all as specified and directed by Engineer in charge. |
| 174 | Material and labour in replacementfully automatic star-delta starter for submersible pump set of capacity 50 HP , 415 V , with relay range 45-75 amps with single phase preventer 50 Hz 3 Phase complete all as specified and directed by Engr-in-Charge. |
| 175 | Material and labour taking out the broken submersible pump set of capacity 40 HP and deposit in store yard and supply and fixing of submersible pump with motor three phase 415 volts capacity 40 HPhaving 130-50 mtr head 600-1800 lpm discharge 8 staging, outlet delivery size 100mm dia complete all as specified and directed by Engineer in-charge. |
| 176 | Material and labour in replacement of the unserviceable contactor 3 pole of AC3 ratingupto 100 Amp or as per existing rating and 220 V/415V coil rating complete with all new wiring including thimbles and lugs,nuts and screws all as specified and directed by Engr-in-charge. |
| 177 | Material and labour in replacement of worn out / defective thermal overload relay with range 45-75 Amps415 V, 50 Hz with all new wiring including lugs and thimbles if required ,complete all as specified and directed by Engr-in-Charge. |
| 178 | Material and labour in replacement of worn out / defective single phase preventor suitable upto 50 HP star- delta starter 415 V, 50 Hz,complete all as specified and directed by Engr-in-Charge. |
| 179 | Material and labour in replacement of Nut-bolts of existing sizes for column pipes and pumpsets. |
| 180 | Material and labour in replacement of Rubber Packings of 100 mm bore sizes. |
| 181 | Material and labour attending any type pump/motor/LT panels/DGs/Starters complaint at pump houses and boosters and rectify the same, rates are also included for replcement of thimbles any type and any size with nut-bolts and cable jointing with insulating tape, gland packing, greasing in pumps/valves with all connected items all as specified by the Engr-in-Charge. Note: Complaint should be rectify within 06 Hrs otherwise a penalty of 250 Rs per day will be imposed. |
| 182 | Decoupling of horizontal split casing type centrifugal pump of capacity upto 50 HP from electric motor, dismantling from the foundation and shifting to local workshop approved by Accepting Officer for opening the pumps for checking and rectification of defects by welding/threading/cutting/ of upper half & Lower half casing with suction and discharge flanged of existing size of pump and its studs, nut, bolts, washers, cylindrical pin and gasket and all required or connected items for same and replacing defective parts which shall be measured and paid separately as supply only herein after including transporting back and refixing and testing complete all as specified and directed. NOTE: Contractor shall deposit all the replaced parts to the MES store. |
| 183 | Complete removal of the wild grass/ vegetation from surrounding area of OHTs, Tubewells/Boosters and installations areaand making the surface clear and plain and spraying roundup chemical on the same clean areaas directed after removal of vegetation and depositing the same at a distance not less than 50 mtr away from the site complete all as specified. Note- Roundup chemical will be provided by the contractor. |
| 184 | Supply and laying GI pipe light grade of size 50mm bore with necessary excavation and fitting required as in protection pipe for cable to pass under road, trench to the panels by taking down the cable connection properly and making the surface good after laying the pipe and reconnecting the electric connections complete. |
| 185 | Material and labour for brick masonary valve pit of size 900 x 900 x 900mm dimensions, one brick thick valve pit of following internal dimension with 1.6 mm thick MS sheet cover, with 35x35x6 mm stiffner welded diagonally on angle iron frame cover of size 50 x 50 x 6 mm including provn of suitable hold fasts to hold the frame and locking arrangements incl two coats of first grade synthetic enamel paint over a coat of red oxide primer on surfaces, earth work and PCC in foundation (1:3:6) Type C2 using 40mm graded stone aggregete 150 mm thick, PCC in coping on top (1:2:4),Type B1 using 20mm graded stone agregate 100mm thick including rendering 15mm thick and two coat of white wash on exposed surfaces on external wall above ground level incl demolition of old unserviceable existing one complete all as specified and directed by Engr-in-charge. |
| 186 | All as per item No. 61.00 here in before but of size1200 x 1200 x 1200mm. |
| 187 | Supply & fixing in replacement of Joist, channel, angle, or tee sections, fixed independently with welding, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) of Fe-410W(GdeE-250) quality B against worn out/deformed channel, angle iron etc complete all as specified and directed by Engr-in-Charge. |
| 188 | Supply only bronze Impeller as per existing of horizontal split casing type centrifugal pump of capacity upto 50 HP. |
| 189 | All as per item No. 63 here in before but Pump Shaft as per existing |
| 190 | All as per item No. 63 here-in before but Wear Ring as per existing |
| 191 | All as per item No. 63 here-in before but Shaft Sleeve as per existing |
| 192 | All as per item No.63 here-in before but Gland packing as per existing |
| 193 | All as per item No.63 here-in before but bearing as per existing |
| 194 | All as per item No. 63 here-in before but Impeller Key as per existing |
| 195 | Supply and fixingcast iron fitting/ductile iron for spigot and socket /flanged pipe such as bends (any type radius and angle) tapers any type ( straight, bends, increasing, decreasingor double socket etc) Tee pieces single branch, "Y" junction, double branch , cross collers , caps and plugs upto 300 mm bore complete all as specified and directed by Engineer-in-Charge |
| 196 | Fixing of street light of any capacity for any lumens as per existing . |
| 197 | Excavation in trenchesnot exceeding 1.5m in wideand not exceeding 1.5 m in depth for laying of pipe etc and getting out in soft soil, complete all as specified and directed. |
| 198 | Material and labour for returning, filling in including spreading leveling watering and well ramming in layers not exc. 25 cm thick complete all as specified and directed.(Surplus soil if any shall not be removed but left over the trench) |
| 199 | Material and labour for removing surplus soil to a distance not exc. 50 M and depositing where directed at a level not exceeding 1.5 Mtr above the starting point complete all as specified and directed. |
| 200 | Material and labour for sandcushioningwith clean dry sandto cables with layer of sand 8 cm before laying of cable and 15 cm thick after laying of cablecomplete all as specified. Note: For payment purpose punned thickness of 18 cm shall be measured against spread thickness of 23 cm as mentioned in para 19.75 of SSR part-I. |
| 201 | Material and labour for providing PCC cable cover class LV type-I of size 250x150x40mm laid in perpendicular to the cable abutting each other all as specified and directed at site. |
| 202 | Laying only in replacement of existing unserviceable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volt grade of any cross sectional area complete all as specified and directed. |
| 203 | Supply and laying in replacement 150 mm bore Centrifugally Cast (Spun) Ductile Iron Pressure Pipes with Flanged end/spigot socket ends , Class K-9 conforming to IS: 8329/2000 and suitable for rubber gasket jointing incl nuts bolts with centrifugally applied inside cement mortar lining as per IS: 455:1989 and external Metallic Zinc Coating as per annex A of IS 8329 with finishing layer of Bitumen coating as per Annex C of IS: 8329 complete all as specified and directed by Engineer-in-Charge. |
| 204 | All as per Ser ltem No 72.00 here in before but of 100 mm bore. |
| 205 | Note:-Amount of credit ofRs. 378530.00 for retrieved materials is mentioned in Schedule of Credit attached in tender documents in pdf form which will be deducted offline while acceptance of tender. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
