Military Engineer Services-MES has published Repairs To Flooring, Tilling, Roofing, Plastering, Sanitary Fitting And Internal Electrification In Certain Buildings At Tech Area Afs Under Ge ( Af ) Jorhat. Submission Date for this Tender is 12-08-2022. Electrification Work Tenders in jorhat Assam. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including "Nainital" or similar pattern roof covering complete all as specified and as directed. |
| 2 | S&F Pre- painted galvalume aluminium zinc coated GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screw complete all as specified and as directed. |
| 3 | S&F Pre- painted galvalume aluminium zinc coated GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall,ridge,facia etc.complete fixed with self tapping screw complete all as specified and as directed. |
| 4 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 5 | M&L for Machine cut kota stone slab flooring 20-25mm thick area of each piece exceeding 0.18 sqm but not exceeding 0.38 sqm over and including 20 mm thick screed bed in cement mortar (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 6 | M&L for coloured non skid ceramic tiles of size7 to 8 mm thick (Square / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in FLOOR etc. set and jointed in neat cement slurry and pointed in white or colured cement to match, over and including 20 mm thick screed bedding layer in cement mortar 1:6 complete all as specified and directed. |
| 7 | M&L for Glazed ceramic coloured tiles in vertical surfaces such as DADO etc, size 300x200x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 10 mm thick rendering in cement mortar 1:4 as backing layer for tiles complete all as specified and as directed. |
| 8 | M&L for Vitrified ceramic tiles 10 mm thick(Square / rectangular) polished "light shade" or any shade ,area of each tile not exceeding 0.36 sqm, as in FLOOR / SKIRTING etc set and jointed in neat cement slurry and pointed in white or colured cement to match over and including 20 mm thick bedding layer in cement mortar 1:6 as screed bed complete all as specified and directed. |
| 9 | M&L for 100 mm thick Plain cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in floor, paving, path, hard standing finished the surface without using extra cement complete all as specified and directed. |
| 10 | Taking down chowkat or frame with shutter (without taking off shutters from the frame) of area exc 1.5 Sqm and not exc. 4sqm each complete all as specified and directed. |
| 11 | Taking down chowkat or frame with shutter (without taking off shutters from the frame) of area n.exc 1.5 Sqm each complete all as specified and directed. |
| 12 | S&F 2nd class hard wood plain ,solid, straight, chowkhat and framed, wrought, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed |
| 13 | S&F 2nd class hard wood 30 mm thick glazed and skelton shutters open rebated and prepare to receive glass, gauge etc divided into squares with plain chamfered or rounded mitred and sash bars any number edges of framing plain chamferedor rounded fitted with cut and mitredbeads for securing glass etc sizes of members of shutters as specified in SSR part I section 8 clause 8.24 (a) and fited to wooden chowkhat, complete all as per specified and directed. |
| 14 | S&F 2nd class hard wood 35 mm thick glazed and skelton shutters open rebated and prepare to receive glass, gauge etc divided into squares with plain chamfered or rounded mitred and sash bars any number edges of framing plain chamferedor rounded fitted with cut and mitredbeads for securing glass etc sizes of members of shutters as specified in SSR part I section 8 clause 8.24 (a) and fited to wooden chowkhat, complete all as per specified and directed. |
| 15 | S&F40 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 16 | S&F Factory made 2nd class hard wood 35 mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressuretreated complete all as specified and directed. |
| 17 | M & L for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing shown in SSR PT II as approved , complete all as specified and directed. |
| 18 | S&F Factory made solid panel PVC door shutter 30mm thick (style) connecting of frame made out of MS tube for top and bottomrail. MS frame shall be coverd with heat moulded plain coour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail of either side and as gap insert for top rail and bottom rail panelling of plain colour PVC to be fitted in the ms frame welded/ sealed in the stiles and rail with suitable PVC sheet and beading and jointed together with solvent cement,complete all as specified and directed. |
| 19 | S&F 75 mm long,"medium weight" cold rolled mild steel butt hinges complete all as specified and directed. |
| 20 | S&F 100 mm long,"medium weight" cold rolled mild steel butt hinges complete all as specified and directed. |
| 21 | S&F100 mm size, extruded aluminium alloy handles fabricated type anodised complete all as specified and directed. |
| 22 | -Ditto- all as per Srl item No. 21 here-in-beforebut 150 mm size complete all as specified and directed. |
| 23 | S&F100 mm long aluminium anodised tower bolt of extruded section complete all as specified and directed. |
| 24 | -Ditto- all as per Srl item No. 23 here-in-beforebut 150 mm long complete all as specified and directed. |
| 25 | Dismantling wall and ceiling boards (Fibre, pulf, insulation etc.) of any thickness including cover fillets complete all as specified and directed. |
| 26 | M&L for 6 mm thick plywood (3 Nos ply) grade BWR, type BB fixed to timber frame work with screw complete all as specified and directed. |
| 27 | M&L for 2nd class Hard wood plain fillets square rectangularor triangular in section wrought sectional area exc 3.0 sqcm & not exc 6.0 sqcm (as in COVER FILLETS) screwed with nails complete all as specified and as directed. |
| 28 | Dismantling timber scantling, 40 sqcm and over in section, in any position, in unframed work, complete all as specified and directed. |
| 29 | M&L for 2nd class Hard woodclean sawn on faces as in framed work as in scantlings complete all as specified and directed. |
| 30 | Taking up or down steel water tubing 15 mm dia including connections and fitting complete all as specified and directed. |
| 31 | Taking up or down steel water tubing 20 mm dia including connections and fitting complete all as specified and directed. |
| 32 | S&F 15 mm dia steel water tubing, galvanised, "Medium Grade" with all fittings, fixed to walls, ceiling or laid in floor complete all as specified and directed. |
| 33 | S&F 20 mm dia steel water tubing, galvanised, "Medium Grade" with all fittings, fixed to walls, ceiling or laid in floor complete all as specified and directed. |
| 34 | S&F in repair 15mm bore (dia) Bib Tap, cast copper alloy, "Chromium Plated" with Capstan Heads Handle, screwed for Iron Pipe, complete all as specified and directed. |
| 35 | S&F in repair 15mm bore Pillar tap, cast copper alloy, "Chromium Plated" with capstan heads, screwed down high pressure, with long screwed Shanks and Fly-Nuts, screwed for Iron Pipe, complete all as specified and directed. |
| 36 | S&Fin repairs Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed. |
| 37 | S & F in repair Vitreous China Squatting Pan ‘ORISSA’ Pattern of size 580X440 mm White, with "P" or "S" Trap integral Foot rest, providing Joints between Flush Pipe and Socket of WC Pan (excluding Flushing Cistern and Flush Pipe), fixing with and including provision of 150mm thick Lime concrete bedding, complete all as specified and as approved. Make : -Cat part No :C0117 of make Parryware or equivalent of Kohler, Cera, Hindware as approved by GE |
| 38 | S & F in repair 10 litres capacity PVC low level syphonic action type flushing cistern "white" with inlet, ball valve, float and handle including brackets and flushing pipe, complete all as specified and directed. |
| 39 | S & F Vitreous China Wash Hand Basin size 550 x 400mm (flat back or angle back type) white with 32mm dia brass chromium plated waste fitting, galvanised iron "Light Grade" 32 mm bore waste pipe, a pair of cast iron brackets duly painted / erecting stand including cutting and pinning in ends, making good distrurbed surfaces in cement mortar 1:3 inlcuding taking down unservicable wash hand basin and connected items, complete all as specified and as approved. Make :- Parryware Model Aquiline (L) or its equivalent of Kohlar, Hindware (Italian Collection), Cera (1st Quality) as approved by GE. |
| 40 | S & F in repairs PVC connection 15mm size with PTMT Nuts of length 450mm and fixed complete all as specified and as directed. |
| 41 | S&F 75mm bore PVC (SWR) soil, waste and ventilating pipe single socket in any legth with rubber ring joint fixed to wall with CI clamps, including taking down / up unserviceable pipe, complete all as specified and as directed. |
| 42 | All as per item No 41 here in before but 110 mm bore PVC (SWR), complete all as per specified and as directed. |
| 43 | S & F in repairs 75 mm bore (dia) PVC (SWR) bends, complete all as per specified and as directed. |
| 44 | All as per item No 43 here in before but 110 mm bore dia PVC (SWR), complete all as per specified and as directed. |
| 45 | S&Fin repairs 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 46 | S&F in repairsTowel Rail 600 mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms) complete all specified and directed. |
| 47 | Demolition of Brick work built in cement mortar including all quoins, arches, pillars, etc,complete all as specified and directed. |
| 48 | M&L for Brickwork with subclass ‘B’ bricks (with old size first quality) straight or curved on plan exc 6m mean radius built in cement motar 1:6 complete all as specified and directed. |
| 49 | Taking down Cement Plaster, any description on brick walls or on concrete surfaces including raking out Joints, hacking for Key, scrubbing down with Water, etc. complete all as specified and as directed. |
| 50 | M & L for rendering 10 mm thick in CM (1:6) on fair faces of brick work or concrete surfaces and finished even and smooth, without using extra cement complete all as specified and as directed. |
| 51 | M&L for 75 mm thick Plain cement concrete 1:3:6 type C-2 (using 20 mm graded stone aggregate) as in flooring, plinth protection finished even and smooth surface without using extra cement complete all as specified and directed. |
| 52 | Taking down plastering on lathing (other than wire-netting), without removing lathing, in cement lime or cement mortar(one side only measured in cases where both sides are plastered) complete all as specified and directed. |
| 53 | S&F GI wire netting 0.90mm dia and 12mm mesh lathing to wood or metal studding, joists, etc. in walls, ceilings, stanchions, beams, etc. including all laps, cutting and waste complete all as specified and directed. |
| 54 | M&L for 15 mm thick lath plastering in cement mortar 1:6 on one side of lathing, finishing plaster surface even and smooth without using extra cement complete all as specified and directed. |
| 55 | M&L for 15 mm thick lath plastering on other side of lathing incement mortar 1:4, finishing plaster surface even and smooth without using extra cement complete all as specified and directed. |
| 56 | M&L for applyig one coat of cement base paintafter preparation of old decorated plastered surface of wall complete all as specified and directed. |
| 57 | M&L for applyig two coats of cement base paintafter preparation of new plastered surface including applying primer on walls complete all as specified and directed. |
| 58 | M&L for Applying one coat of distemper oil emulsion (oil bound washable distemper) after preparation old distempered surface of wall by washing, rubbing down and stopping of distempered surfaces complete all as specified and directed. |
| 59 | M&L for Applying two coats of distemper oil emulsion (oil bound washable distemper) after preparation of new surfaces of walls complete all as specified and directed. |
| 60 | M & L for Applying onecoat of synthetic enamel paint after preparation of old painted wood and wood based surfaces of any description not otherwise described over 10cm width or girth complete all as specified and directed. |
| 61 | M & L for Applying twocoats of synthetic enamel paint over a coat of pink primer after preparation of new painted wood and wood based surfaces of any description not otherwise described over 10cm width or girth and complete all as specified and directed. |
| 62 | M&L for 2nd class hard wood Weather boarding, clean sawn, plain, 20mm thick or feather edged 15 mm to 20mm thick and fixed with 30mm laps complete all as specified and directed. |
| 63 | Taking down carefullypoint wiring (light, fan, socket etc) complete including battens and fittings such as switch, ceiling rose, light fittings, regulators, socket etc and making good disturbed surface of wall / floor etc. complete all as specified and directed. |
| 64 | M & L for point wiring with 1.5 sqmm FRLS grade PVC insulated and unsheathed stranded copper conductor cable,1100 volts grade as per IS-694drawn through and includingPVC cassing and capping (not less than 20 mm wide) complete with all acessoriesincluding PVC board/ box of suitable size for mounting of switches, sockets, regulators etc including 1.5 sq mmstranded copper conductor cable FRLS grade PVC insulated and unsheathed as earth continuity conductor for one lightpoint controlled by one way switch complete by maintaining the colour code complete all as specified and directed. |
| 65 | -Ditto- all as per Ser item No. 64 here-in-before but for One ceiling / exhaust fan point controlled by one one way switch complete all as specified and directed. |
| 66 | -Ditto- all as per Ser item No 64 here-in-before but for 5 amps socket point on independent board complete all as specified and directed. |
| 67 | -Ditto- allas per Ser item No 64 here-in-before but for 5 amps socket point on same board controlled by another switch, complete all as specified and directed.. |
| 68 | -Ditto- all as per Ser item No 64 here-in-before but with 2.5 sqmm cable for 15 amps socket outlet on independent board, using 2.5 sqmm earth continuity conductor complete all as specified and directed. |
| 69 | -Ditto- all as per sl. item No. 64 here-in-before but with 4 sqmm cable for 20/25 amps power unit on independent board, using 4 sqmm earth continuity conductor complete all as specified and directed. |
| 70 | S&F Ceiling rose surface backelite three terminals, PVC / polycarbonate, insulated body complete all as specified and directed. |
| 71 | S&F Switch piano flush type, 6 Amps 240 volts single pole one way complete all as specified and directed. |
| 72 | S&F Socket outlet, 5 pin 6 Amps, flush type complete all as specified and directed. |
| 73 | S&F Socket outlet 15/16 Amps, 6 in 1, flush type complete all as specified and directed. |
| 74 | S&F Switch piano flush type,15/16 Amps 240 volts single pole one way complete all as specified and directed. |
| 75 | S&F Fan regulator electronictype, rotary step, socket type 240 volts complete all as specified and directed. |
| 76 | S&F Switch socket combination 2 in 1, 3 pin, 5 and 15 Amps flush type universal complete all as specified and directed. |
| 77 | S&F Switch socket combination 2 in 1, 5 Amps flush type complete all as specified and directed. |
| 78 | Supply and drawing submain wiring with two runs of single core 6 sqmm FRLS PVC insulated copper cable 1100 vots grade multistrand, unsheathed conductor drawn into PVC casing and capping and all necessary fittings including 6 sqmm multi strand FRLS PVC insulated copper wire for earth continuty conductor connected to common earth dolly complete including taking down old unserviceable sub main wiring of any size and making good disturbed surface complete all as specified and directed. NOTE:- (i)Extra lenght of cables / wire required for connection to MCBs / DBs shall not be measured under this items. (ii) Cuttings / chasing of wall etc and making good the disturbed surface shall be measured and paid separately. (iii)Three runs of cable 6 Sqmm shall be measured as one RM of sub main wiring. |
| 79 | -Ditto- all as per Ser Item No- 78 here-in-before but two runs of single core 4 Sqmm for phase & neutral and 01 run of single core 4 Sqmm for earth wire complete all as specified and directed. (i)Three runs of cable 4 Sqmm shall be measured as one RM of sub main wiring. |
| 80 | S&F in repair 20 watt intregated LED tube light fitting 4 ft , suitable for single phase 230 Volts, 50 Hz AC supply andmounted on wall or ceiling,complete with all accessories internally prewired and including electrically connection withcopper conductor cable of size 0.5 Sqmm (nominal area) all as specified. Make:- Crompton, Cat No.CCS-102-20-65-SL-DP-NWH or equivalent model in Philips / Wipro as approved by GE. |
| 81 | S&F in repair 10 watt intregated LED tube light fitting 2 ft , suitable for single phase 230 Volts, 50 Hz AC supply andmounted on wall or ceiling,complete with all accessories internally prewired and including electrically connection withcopper conductor cable of size 0.5 Sqmm (nominal area)all as specified. Make:- Crompton, Cat No.CCS-102-10-65-SL-DP-NWH or equivalent model inPhilips / Wipro as approved by GE. |
| 82 | Taking down MCB DB / Main switch of any size and making good disturbed surface of wall / floor complete all as specified and directed. |
| 83 | S&F SP&N DBs, double door, 240 volt,8 way complete all as specified and directed. MAKE:- Legrand Cat part No. 5076 11 or equivalent of make L&T/ Siemens as approved by GE. |
| 84 | S&F VTPN DB , 415 volt,4 way, 200Amp Bus Barwith metal door having facility for MCCB incommingand MCB out going complete all as specified and directed. Make: Legrand Cat No. 507745 or its equivalent model in Havells, L & T, Schnieder as approved by GE. |
| 85 | S & F in repair MCCB 63 Amps current carrying capacity 415 volts, 25 KA, 4 pole thermal magnetic type complete all as specified and directed. |
| 86 | S&F MCB single pole, 240 volts, 6-32 Amps, 10 KA, C Curve complete all as specified and directed. |
| 87 | S&F MCB single pole & neutral 240 volts 32Amps, C Curve complete all as specified and directed. |
| 88 | S&F in repairs Building security light30 watt LED light fitting, new generation energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP-65 roadway luminaire with high power LEDs as light source & exclusively designed polycarbonate cover alongwith electronic driver, complete all as specified and directed. Make:Crompton, Cat No.LSTS-30-CDL-M or its equivalent model in Philips/ Wipro as approved by GE. |
| 89 | Taking down ceiling fan / exhaust fan/ wall fan including ceiling cable of any Size / Sweep and Make by disconnecting electric connection, dismantling blades, down rod and removing ceiling fan to MES STORE YARD OF AGE E/M (AF) JORHAT for Check-ing, complete all as specified and as directed (Repair / painting shall be measured & paid separately). |
| 90 | M&L for Opening Stator of ceiling fan 1200mm / 1400mm sweep cleaning of parts, greasing of moveable parts and re-assembling, after repair, testing complete all as specified and directed. NOTE : Replacement of unserviceable Parts viz burnt coil, Ball Bearing, Bush, Capacitor, etc. shall be measured and paid separately under respective Items as mentioned here-in-after. |
| 91 | M&L for taking out burnt coil of ceiling fan 1200mm sweep, cleaning the segments complete and Re-winding the same with super enamelled copper wire of same gauge and same weight with Insulation paper, varnishing and heating complete all as specified and directed. |
| 92 | M&L for re-assembling the ceiling fan / exhaust fan/ wall fan / padestal fan of any sweep after repairs and testing complete all as specified and directed. |
| 93 | S&F Ball bearing No. 6201 as approved suitable for ceiling fan of any sweep and make, complete all as specified and directed. |
| 94 | S&F Capacitor 2.5 MFD 440 Volts AC 50Hz, suitable for ceiling fan of any sweep and Make, complete all as specified and as directed. |
| 95 | S&F Split pin (as per sample approved) for ceiling fan of any sweep and Make complete all as specified and directed. |
| 96 | S&F Bush (Gun metal) (as per sample approved) including lathe machining work as approved suitable for ceiling fan of any sweep and make complete all as specified and directed. |
| 97 | S&F Down rod(as per sample approved) suitable for ceiling fan of any sweep and Make complete all as specified and directed. |
| 98 | S&F Down rod clamps with rubber reel(as per sample approved) of suitable sizeincluding necessary mild steel nut & bolts, washer etc. complete all as specified and directed. |
| 99 | M&L for Applying one coat DUCCO paint with spray painting machine including writing MES No. in black paint after preparation of surfaces of ceiling fan of 1200 /1400 mm sweep and Make, complete body, blade, down rod, cleaning dust, dirts, etc. including fillingcavities with filler complete all as specified and directed. |
| 100 | Hanging only ceiling fan of any sweep and make and connecting up electric connection, from ceiling rose / connector to fan, including Provn ofnecessary electric cable of required size from ceiling rose to fan complete all as specified and directed. Note : Flexible wire is provided under respective item. |
| 101 | M&L for Earthingwith Galvanised steel earth plate electrode 600 x 600 x 6mm thickburried directly in ground vertically to a depth of not less than 2.25 mtr below ground level connected to GI strip 32 x 6 as earthing lead by means of nut, bolts and washers made out of galvanised iron mild steel and 40 mm dia GI pipe "light grade" for protection of earth lead and connected to test point or as directedincluding PCC Pit in Cement Concrete Type C2 1:3:6 (using 20mm graded stone aggregate) and RCC Cover of size 450X450X50mm in RCC type B1 1:2:4 (20mm graded stone aggregate) reinforced with and including 8.0mm dia TMT Bars @ 100mm centre to centre both ways, Galvanised Iron Wire Mesh, Funnel, Galvanised Iron Watering Pipe 20mm Bore (dia) Medium Grade, includingnecessary Excavation in Soft/ Loose Soil, returning, filling in and removal of surplus Soil upto a distance of 50.00 mtr and all as shown in Electrical Plate No. 5 of MES Schedule Part-I and testing on completion, completeall as specified and directed. |
| 102 | Excavation in Trenches not exc. 1.50 mtr wide and not exc. 1.50 mtr in depth,and getting out in Soft / Loose Soil, complete all as specified and directed. |
| 103 | Returning, filling in, including spreading, levelling,watering and well ramming in layers not exc 25cm. complete all as specified and directed. |
| 104 | Removing excavated materials not exc. 50.00 mtr and depositing where directed at a level not exc. 1.50 mtr above the starting point, complete all as specified and directed. |
| 105 | Taking down / out unserviceable or serviceable UG cables of any cross sectional area and connections including bricks, etc. of any descriptions, laid in trenches and /or fixing with walls /poles including segregating of serviceable materials viz bricks, cables,etc. and kept in Safe custody for re-use, complete all as specified and directed. (NOTE : Earth Work shall be measured and paid separately under relevant Items here-in-before.) |
| 106 | M & L for cable in trenches or passing through pipe, XLPE insulated,heavy duty,galvanised steel strip or wire armoured electric LT cable with stranded aluminium conductor for 1100 volts grade cross sectional area 25 sqmm 3.5 core, complete all as specified and directed. |
| 107 | M&L for Sand Cushioning (dry) in trenches for protection of UG Cables (below, above and around the UG Cable laid in trenches) of 230mm Spread thickness and consolidated (punned) upto 180mm thickness, complete all as specified and directed. (NOTE : For the purpose of payment, punning thickness of Sand cushioningshall only be measured and paid). |
| 108 | S&F Sub-Class "B" brick, well burnt, laid breadth-wise along the length of Cable as in Trenches over Sand Cushion for UG Cable protection, complete all as specified and directed. |
| 109 | Re-laying only old Brick in trenches for under ground Cable Protection (Serviceable Bricks obtained from Item here-in-before), complete all as specified and directed. |
| 110 | S & F Cable route marker of 350mmhight including grounting and painting HT/LT cast iron complete all as specified and directed. Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule "A"/BOQ. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
