Public Works Department-PWD has published Providing / Renovation / Repair Of Ramps, Railing, Tactile Tiles, Signage Etc. To Make School Building And Environment Barrier Free & Accessible. ( B ) Affixing Acrylic Sheets In Place Of Broken / Missing Window Pans At Sbv Narela, Delhi - 110040. . Submission Date for this Tender is 01-08-2022. Railing Work Tenders in delhi Delhi. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil. |
| 2 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 3 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge.( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:5:10 (1 cement : 5 coarse sand(zone-III) : 10 graded stone aggregate 40 mm nominal size) |
| 5 | Cement concrete pavement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including finishing complete. |
| 6 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 7 | 12 mm cement plaster of mix :1:6 (1 cement: 6 coarse sand) |
| 8 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. |
| 9 | Chequerred precast cement concrete tiles 22 mm thick in footpath &courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).Medium shade pigment using 50% white cement 50% Grey cement. |
| 10 | Providing and fixing carbon steel galvanised (minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm² ), counter sunk head, comprising of 10 m dia polyamide PA 6 grade sleeve, including drilling of hole in frame, concrete/ masonry, etc. as per direction of Engineer-in-charge.10 x 80 mm |
| 11 | Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge. |
| 12 | Dismantling of flushing cistern of all types (C.I./PVC/Vitreous China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. |
| 13 | Providing and fixing PTMT bib cock of approved quality and colour. 15 mm nominal bore, 122 mm long. Weighing not less than 99 gms. |
| 14 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 32 mm dia |
| 15 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge. |
| 16 | Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :250x16 mm |
| 17 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : 250x10 mm |
| 18 | Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :125 mm |
| 19 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade. New work (two or more coats) over and including water thinnable priming coat with cement primer. |
| 20 | Providing and fixing wash basin with C.I. brackets, 15 mm PTMT pillar cock, 32 mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin size 550x400 mm with single15 mm PTMT pillar cock. |
| 21 | Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length15 mm nominal bore |
| 22 | Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady] the frame. |
| 23 | Providing and fixing to existing door frames.30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames. |
| 24 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete |
| 25 | Providing and laying Ceramic glazed floor tiles of size 600x600 mm(thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc.,., complete. |
| 26 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 27 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete |
| 28 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work. |
| 29 | Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40mm dia. M.S. tube 1.5m centre to centre horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc. wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge .The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding. |
| 30 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead: Of area 3 sq. metres and below |
| 31 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm |
| 32 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid |
| 33 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. :Concealed work, including cutting chases and making good the walls etc.20 mm nominal outer dia .Pipes. |
| 34 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. :Concealed work, including cutting chases and making good the walls etc.25 mm nominal outer dia .Pipes. |
| 35 | Providing and fixing uplasticised PVC connection pipe with brass unions :45 cm length15 mm nominal bore |
| 36 | Providing and fixing PTMT grating of approved quality and colour.Circular type.100 mm nominal dia. |
| 37 | Providing and fixing PTMT angle stop cock 15 mm nominal bore. Weighing not less than 85 gms. |
| 38 | Providing & fixing transparent acrylic sheet 4mm thick in steel window with putty and nails wherever necessary required as per direction of Engineer-in-charge. |
| 39 | Total |
| 40 | Add Cost Index 22.69% |
| 41 | Total |
| 42 | Less 9.50% as per Delhi Govt. Circular |
| 43 | Total |
| 44 | Providing and laying cement concrete (M30 grade) tactile tile such as directional, warning or hazardous (for vision impaired persons as per standards) of size 300x300x60 mm {60 mm base + (5mm ± 0.5mm) thick raised portion}having water absorption = 6% and conforming to IS: 13801, of approved make in all colours (preferably yellow) and shades for footpath laid on 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. (The thickness of wearing layer should not be less than 8mm) and as per harmonized guidelines and space standards for barrier free built environments for persons with disability and elderly persons issued by Ministry of Urban Development, Govt. of India complete as per direction of Engineer-in-Charge. |
| 45 | Providing and fixing Building Entrance signage / Tactile Layout / Emergency Evacuation Layouton the wall or with any other required structure, with provision of multilingual text integral with 4mm thick blue Acrylic base plate with min 0.5 mm Alluminium sheet at the back with Upper Case San Serif words made of white acrylic non glare cut out letters of height 15mm, raised above base plate by not less than 0.8mm and the equivalent word/s written in Hindi / any language as required with same specifications with Grade 1 Braille to be integral with the sign face and should be raised 0.5mm above Acrylic base plate. Each signboard to be fixed strictly as per the Harmonised Guidelines & Space Standards for Barrier Free Built Environment for persons with Disability, issued By MOUD, Govt. of India, and as as per approved drawings and complete as per the directions of Engineer-In-Charge. (Note:- i). Payment for structure, if required, shall be paid separately.)ii) Size of the Signboards shall be proportional to the layout plan of the particular building, Min Size of the above signboards shall not be less than 1200mm X 750 mm. |
| 46 | Providing and fixing signages on the wall or with any other required structure, with provision of multilingual text integral with 4mm thick blue Acrylic base plate with min 0.5 mm Alluminium sheet at the back with Upper Case San Serif words made of white acrylic non glare cut out letters of height 15mm, raised above base plate by not less than 0.8mm and the equivalent word/s written in Hindi/any language as required with same specifications with Grade 1 Braille to be integral with the sign face and should be raised 0.5mm above Acrylic base plate. Each signboard to be fixed strictly as per the Harmonised Guidelines & Space Standards for Barrier Free Built Environment for persons with Disability, issued By MOUD, Govt. of India, and as as per approved drawings and complete as per the directions of Engineer-In-Charge. Note:- i). Payment for structure, if required, shall be paid separately.) ii) The Above Nomenclature shall be applicable for all types of signgaes like a)Identificationsigngaes (For Eg Room Names /Toilet facility/Drinking Water/Staircase/Entry/Exit/Lift etc.) of the size 150mmX230 mm or 200X200 mm).b) Floor Directories ( Signboard Placed near the Lift / Staircase/Entry to the particular Floor indicating the facilities on that floor. These are normally also callled as Directional Signages.). Min Size of these Boards shall not be less that 450 mmX450 mm. c) Emergency Exit Sign Boards ( Generally used Text as "In Case of Emergency, Do Not Use The Lift" , "Emegency Exit" etc.) |
| 47 | Providing and fixing 50 mm wide Yellow colour, self addhesive "EDGE STRIPS" of approved make on risers of staircase to help persons with visual diabilities and elederly including cutting and pasting complete in all respect as per direction of Engineer-in-charge. |
| 48 | Providing and fixing 25 mm wide high intensity Anti-Skid reflective tape of approved make on edges of treads of staircase including cutting, pasting etc. complete in all respect and as per direction of Engineer-in-charge |
| 49 | Providing and fixing Stainless Steel (Grade 304) Braille Labels of size 170mm x 35mm X 0.5 mm having Braille dots raised 0.5mm above base platewith one SS rivet of same grade and adhesive of approved makeon handrails, complete as per the directions of the engineer in charge |
| 50 | Providing and fixing in position "U" shapedGrab Bar made up of Heavy Duty stainless steel (grade 304) of 750 mm in length & 40 mm dia (Outer dia with 3 mm thick sheet ) seamless pipeincluding Hinge,base plate and steel fastners, in the toilets as per manufacturers specification, as per drawings and "Harmonised Guidelines & Space Standard for Barrier Free Environment issued by MOUD, Govt Of India" to make them Accessible for Persons with Disabilities. Rate shall include all accessories, labour and material, complete as per direction of Engineer-in-charge. |
| 51 | Providing and fixing in position "L" shapedGrab Bar made up of Heavy Duty stainless steel (grade 304) 40 mm (Outer dia with 3 mm thick sheet ) diaseamless pipe, & 750 mm in vertical length& 900 mm in horizontallengthincluding base plate andsteel fastners in the toilets as per manufacturers specification complete as per drawings and ""Harmonised Guidelines & Space Standard for Barrier Free Environment issued by MOUD, Govt Of India" to make them Accessible for Persons with Disabilities. Rate shall include all accessories, labour and material, complete as per direction of Engineer-in-charge |
| 52 | Cement mortar 1:4 (1 cement : 4 coarse sand). |
| 53 | Providing and fixing coloured, preferably yellow PU - Tactile strips (Guiding) with 3 stems having stem dia of 6.0 mm & stem length between 20 - 25 mm, as ground surface indicators for the visually impaired persons on the pedestrian pathway as per manufacturers design / specification and as harmonised guidelines completein all respect and as per direction of Engineer-in-charge. |
| 54 | Providing and fixing coloured, preferably yellow PU - Tactile strips (Warning/Positional) with 1 stems having stem dia of 6.0 mm & stem length between 20 - 25 mm, as ground surface indicators for the visually impaired persons on the pedestrian pathway as per manufacturers design / specification and as harmonised guidelines completein all respect and as per direction of Engineer-in-charge. |
| 55 | Credit to work for dismantled pre-laminated door/flush door/wooden door/FRP door /PVC door etc. Which shall be the property of the contractor and should be removed from the site of work as per direction of Engineer-in-Charge (Nothing extra shall be paid on account of carriage) of area 3 sqm and below. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
