Military Engineer Services-MES has published Provision Of Galvalume Sheet In Lieu Of Ac Sheets At Offrs Md Accn Bldg No P-1, 2, 3, 5, 8 At Laxam Marg And Certain Sanctioned Works Of Saa ( Phase-13 ) Under Ge ( S ) Tezpur. Submission Date for this Tender is 18-08-2022. Roofing Materials Tenders in tezpur Assam. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 11-Aug-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 18-08-2022 |
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15cm thick above or below ground level, complete all as specified and as directed. |
| 2 | Dismantling asbestos cement corrugated semi corrugated etc sheets in roof covering, complete all as specified and as directed. |
| 3 | Dismanting timber scantling 40 Sqcm and over in secion in any position inframed work or unframed work, complete all as specified and as directed. |
| 4 | M&L 2nd class HW in scantling fixed clean swan in framed work, complete all as specified and as directed. |
| 5 | M&L second class hardwood Weather boarding, 20mm thick, wrought both sides and edges shot and chamferedincluding dismantingof any description fixed in any position, complete all as specified and as directed. |
| 6 | Dismantling Structural steel work includings door, gates, etc and similar works, complete all as specified and as directed. |
| 7 | S&F steel work in tubular trussof different size bend to shape, cut to length etc, including necessary welding,special shape washer, conforming to IS:1161-1998 grade St-240 complete as directed by Engineer in Charge. |
| 8 | S&F of joist, channel, angle, flat iron or Tee sections, fixed independently with connecting plates, etc confirming to Fe 290 (Gde E-165 ) complete all as specified and directed. |
| 9 | S&F 10 mm dia MS bolts purpose made with hexagonal or square head on one end and screwed the other, screwed and fitted with nut and washer, lengthn exc 5 cm, complete all as specified and as directed. |
| 10 | M & L Mild steel plates, plain or chequered, 5mm thick or over FE -290 (Gde E-165) Complete all as specified and as directed. |
| 11 | S&F Mild steel, plain, black sheet 1.25mm thk in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. Complete all as specified and as directed. |
| 12 | M&L for RCC M25 (design mix) (20mm graded aggregate)as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, underremaed pliles and mass concrete, complete all as specified and as directed. |
| 13 | M&L for RCCM25 (design mix) (20mm graded aggregate) as in coloumn, pillar, pier, posts etc., complete all as specified and as directed. |
| 14 | M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, complete all as specified and as directed. |
| 15 | M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions, complete all as specified and as directed. |
| 16 | M&L Mild steel TMT bars 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and as directed. |
| 17 | All as per Item No 16 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, complete all as specified and as directed. |
| 18 | S&Fpre-painted galvalumealuminium zink coatingGIbased corrugatedsteel sheet0.50 mmthick of an colour havingtensilestenghtof 550 MPAas in roof covering /cladding to wall, fixed with self tappingscrews, complete all as specified and as directed. |
| 19 | S&Fpre-painted galvalumealuminium zink coatingGIbased plain steel sheet0.50 mmthick of an colour havingtensilestenghtof 550 MPAas in valley, ridge,eaves board fixed with self tappingscrews, complete all as specified and as directed. |
| 20 | Dismanting wall /ceiling board (Fibre pulp insulation) or insulation boards any thickness including cover filters, complete all as specified and as directed. |
| 21 | S&F Exposed GI powder coated snap grid frame for false ceiling 600x600mm size of wall angle 25x25x0.25mm size of cross tee and main tee26x24x0.25mmand 32mm x 24mm x 0.25mmwith 1.5mm dia double GI suspentor including supply and fixing of 4mm thick E Board decorative type in false ceiling including fixing arrangement from steel tress any type of tress , complete all as specified and as directed. |
| 22 | Taking down cement plaster, of any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water all as directed. |
| 23 | M & L, 15mm thick rendering in C.M. (1:4) on fair faces of brick work finished even and fair without using extra cement , complete all as specified and as directed. |
| 24 | M & L, 10mm thick rendering in C.M. (1:6) on brick workfinished even and smooth without using extra cement . |
| 25 | M&L for liquid integral water proofing compound, complete all as specified and as directed. |
| 26 | M&L for preparation of new undecorated surface of wall and applying three coats of white wash on wall. Complete all as specified and as directed. |
| 27 | M&L two coat of white wash on old wall surfaces of walls and cornicesincluding preparation of old plastered or un plastered of surafce of wall by brooming down or steel wire brushing ,srcaping down smoke soot ,moulds ,moss and efflorescent salts and trading oil and greasy spot, complete all as specified and as directed. |
| 28 | M&L one coat of white wash on ceiling and cornicesincluding preparation of old plastered or un plastered of surafce of ceiling by brooming down or steel wire brushing ,srcaping down smoke soot ,moulds ,moss and efflorescent salts and trading oil and greasy spot, complete all as specified and as directed. |
| 29 | M&L forOldwall surface including properly including removal of existing paint surface andfillings the cracks with exterior wall care putty and applying one coat of weather coat water proofing paints by smart painting method, completeall as specified and directed. |
| 30 | M&L for Preparation of newley plastered on concerte surface and applying two coats of exterior emulsion paint(Apex) over one coat of priming coat of alkali-resistant priming paint by smart painting method after complete removal of existing treatment of wall surface, complete all as specified and as directed. |
| 31 | M&LApplying onecoat of Acrylic emulsion distember by smart painting method to old wall surfaces of walls and cornicesincluding preparation of old plastered or un plastered of surafce of wall by brooming down or steel wire brushing ,srcaping down smoke soot ,moulds ,moss and efflorescent salts and trading oil and greasy spot, complete all as specified and as directed. |
| 32 | M&LApplying one coats of Oil bound distemper (acrylic distemper) by smart painting methodto newly plastered/previously untreated wall over a coat of 1 mm layer wall care putty over a coat of primer including preparation of newly platsered wall, complete all as specified and as directed. |
| 33 | M&LApplying one coats of Acrylic emulsion distemper (acrylic distemper) by smart painting method to old plastered wall over a coat of 1 mm layer wall care putty over a coat of primer including complete removal of existing treatment, complete all as specified and as directed. |
| 34 | Demolition of old damaged existing water proofing compound on RCC roof of any description and specification andcleaning the surface thoroughly, complete all as specified and as directed. |
| 35 | M & L 15mm thick in cement mortar (1:4) on existing roof surface true to level after applying cement slurry @3Kg/Sqm and appliedcoat of hot blown bitumen of graded 85/25 @1.2 Kg/Sqm, complete all as specified and as directed. |
| 36 | Supply and laying 3mm thick APP based Polymeric membrane of approved manufacture with weight not less than 3.60 Kg per Sqm reinforced with non-woven polyster febric weight not less than 150gms per Sqm.The overlap shall be not less than 100mm on transverse direction and 75mm on longitudinal direction and sealing overlaps and Applying evenly one coat of aluminium paint @ 0.10 liter per square metre over the APP based polymeric membrane including taking down existing water tank of any capacity and refixing on proper place complete all as specified and as directed. |
| 37 | M & L for repairing broken edges of chajja"s, roof projection, Fascias etc . In small widths/depths ( exposed area not exc 0.16 Sqm ) by breaking the cracked/loose portion and filling with Cement Mortar / Plain Cement Concrete 1:2:4 ,Type B-0 , using 12.5 mm Crushed stone aggregates , over GI wire mesh, giving a coat of anti corrosive paint to exposed Reinforcement and using coat of anti corrosive paint to exposed Reinforcement and using chemical for bonding old and new concrete/plaster and finishing with CM 1:3 plastering, incl 2 coats of white wash to match the exisitng surfaces incl removing debris , necessary scaffolding , etc all as specified and directed. (Note : Reinforcement if any provided shall be measured and paid separately), complete all as specified and as directed. |
| 38 | All as per ser item No 37above herein beforebut exposed area exc0.16 Sqm but not exc 0.5 Sqm, complete all as specified and as directed. |
| 39 | S & F I repair Unplasticised PVC pipes 20 mm bore of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc any type of pipe, complete all as specified and as directed. |
| 40 | M&Lforsub Class B bricks, straight or curved on plan exc 6 m mean radius built in cement mortar ( 1:6) having compressive strenght notless than 75 kg/Sq cm, complete all as specified and as directed. |
| 41 | Material and labour forsub class "B" bricks, straight or curved on plan to any radius in half brick thick wall built in cement mortar ( 1:6) having compressive strenght notless than 75 kg/Sq cm all as specified and directed. |
| 42 | Taking down and Hanging only ceiling fan andconnecting up including provision of cable from ceiling rose or connector to fan complete all as sepcified and directed |
| 43 | M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 44 | M&L for applying for preparation of old painted surfaces of old painted steel surfaces and iron surfaces pf any description ,over 10cm width or girth incl and applying one coat ofsynthetic enamel paint all as specefied and directed. |
| 45 | M&L preparation of new wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and as directed. |
| 46 | M&L preparation of old painted wooden surfaces over 10cm width or girth and applying one coatof synthetic enamel paint, complete all as specified and as directed. |
| 47 | Surface dressing n.exc 15 cm deep for soft and loose soil, complete all as specified and as directed. |
| 48 | Excavation in trenches n. exc. 1.5 m wide and n. exc. 1.5 m depth for foundation and getting out in soft/lose soil.for fdn etc Complete all as specified and as directed. |
| 49 | Returning, filling incl spreading levelling watering and well ramming in layers not exc 25 cm for soft/lose soil, complete all as specified and as directed. |
| 50 | Removing excavated material n exc.50 m and depositing where directed at a level n exc 1.5 m above the starting point, complete all as specified and as directed. |
| 51 | M & L for Cement concretein foundations , filling and mass concrete type D-2, 1:4:8, complete all as specified and as directed. |
| 52 | M & L for Hard core of guage not exc 63 mm with broken stone/boulders deposited spread & levelled in layers n.exc 15cm thick, watered & ramed to a true surface, complete all as specified and as directed. |
| 53 | Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 54 | M/L PCC 1:3:6 type C1 20mm grade aggregate as in sub base ,coping,pathor similar work Complete all as specified and as directed. |
| 55 | M&L for 75 mm thick PCC 1:3:6 type C2 using (40 mm graded aggregate) as in path plinth protection layers including filler joints using sealing compound with cement and bitumen (1:3) complete all as specifed and as directed. |
| 56 | M&L for 75 mm thick PCC 1:2:4 type B1 using (20 mm graded aggregate) as in floors and pavings including finishing surfaces of concrete topping even and fair (without using extra cement) complete all as specifed and as directed. |
| 57 | M&L for 100 mm thick PCC 1:2:4 type B1 using (20 mm graded aggregate) as in ramp and paving including finishing surfaces of concrete topping incl spike rolling to surfaces or making grooved, whilst the concrete is green complete all as specifed and as directed. |
| 58 | M&L for 40mm thick cement concrete 1:2:4, type B-0 Damp proof course to horizontal or vertical surfaces including necessary formwork as specifie and directed. |
| 59 | M & L for 40 mm PCC 1:2:4 (20 m graded stone aggregate) as sub floor , sub baseeven and rough to recieve the topping layeras in sub base all as specified and directed |
| 60 | M&L 75 mm thick PCC 1: 3:6 type C2 using 20mm graded agg finishing even and smooth using extra cement as in plinth protections/path/pavingincluding making joints at every 3 mtr and corner and filling the joints with mixture of bitumen at ration 1:3 complete all as specifed and as directed. |
| 61 | M & L for 50 mm PCC 1:4:8 ( 40 m graded stone aggregate) as sub floor , sub baseeven and rough to recieve the topping layeras in sub base, complete all as specified and as directed. |
| 62 | M&L for Polythene film, black, 200 micron thick laid in floors, complete all as specified and as directed. |
| 63 | M & L forming 12 mm thick expansion joints filled with pre fromed bituminous filler and top 30 mm primed and sealed with compound Grade "A" Complete all as specified and as directed. |
| 64 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 65 | Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, removing rubbish off the complete all as specified and directed. |
| 66 | Roughening surafces of old concrete floor by picking sweeping clean and washing down with water to remove dust and brushing neat cement slurry with 3.0 Kg of cement per Sqm all as specified and directed |
| 67 | Non - skid Ceramiccolouredtiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm tick creed bed in cement mortar (1:4)complete all as specified and as directed |
| 68 | M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in Skirting/Dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in CM 1:4, complete all as specified and as directed. |
| 69 | M&L for Machine cut kota stone slab flooring 20-25mm thick over 20mm thk cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed |
| 70 | M&L for Machine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado over 10mm thk cement screed base in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed |
| 71 | M&L for chequred cement concrete tiles of size 300 x 300 x 22 to 25 mm thick with grey cement and pigment, set and jointed and pointed in neat cement slurry in floors laid over & including 15 mm thick screed bed in cement mortar 1:6 Complete all as specified and as directed. |
| 72 | Refixing Chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m but with shutters (without taking off shutters from the frame)in same opening after duly resecuring, complete all as specified and as directed. |
| 73 | Refixing of shuttersof any description exc 1.00 Sqm and n.exc 2.00 sqm each in same opening including of taking down, easing, adjusting and renewal/refixing of builders hardware as required including renewal of unserviceable screws, etc, complete all as specified and as directed. |
| 74 | S&F 3 mm thick sheet glass ordinary quality and glazing with oil puttyin square not exc 0.50 sqm in each pane including hacking out old broken glass any, size, quality or description from wooden / metal frame incl hacking out broken glass complete all as specified and directed. |
| 75 | S&F Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed withstainless steel wire staples, complete all as specified and as directed. |
| 76 | Supply & fix in repair 20 mm dia anodised aluminium alloycurtain rod with two Nos of socket complete for doors/window opening all as specified and directed. Note 1:-The contract sum shall be arrieved at after deducting amount of schedule of credit from the total quated amount.Note 2-Contractor"s supervisor and main worker would wear shirt/T-shirt of colour sky blue/brown/yellow preferable embosed with contractor"s firm name while carriying out any activities in defence area for better check of security purpose.Note 3:-The tenderer (all eligible contractors) shall ascertain the taxes & levies as on date. The subject tender caters all the taxes & levies as on date including the latest notification of GST issued as on date ( issued by Central Board of Indirect Taxes and Customs) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
