Repair Of Youth Hostel At Jai Valley Under Bhadarwah Dev. Authority.
Tender Value
5 Lakhs
Estimated cost
Bid Submission
20 Aug 2022
0 days left
EMD
10000
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
bhaderwah → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repair Of Youth Hostel At Jai Valley Under Bhadarwah Dev. Authority.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 08-Aug-2022 | Extension Notice | Date | 16-Aug-2022 |
| 2 | 16-Aug-2022 | Extension/Corrigendum | Date | 20-Aug-2022 |
BOQ
| Sl. No. | Item Description |
| 1 | Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931 |
| 2 | Providing and fixing 15 mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms |
| 3 | Providing and fixing 15 mm nominal bore C.P. stop cock (concealed) of standard design and of approved make conforming to IS : 8931 |
| 4 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 |
| 5 | Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg. |
| 6 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge 1:3:6 or richer mix (i/c equivalent design mix) |
| 7 | Providing and laying in position cement concrete in in 1:3:6 mix( 1 cement: 3coarse sand 6gradedstoneaggregare) of20mm nominal size of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level |
| 8 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. completeSize of tile 600x600 mm |
| 9 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete.In colour such as White, Ivory, Grey, Fume Red Brown |
| 10 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shadesexcept burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 11 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 12:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 12 | 15mm Cement plaster 1 : 3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall |
| 13 | Providing and fixing un plasticized P.V.C. connection pipe with PTMTcollars and bush of approved quality and colour15 mm nominal bore with 45 cm length. |
| 14 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge |
| 15 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete:18.28.1.1 32 mm dia |
| 16 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 17 | Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete |
| 18 | Wall Painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work |
| 19 | Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106gms. |
| 20 | Providing and fixing solid plastic cover and necessaryfittings complete |
| 21 | Providing andfixing ofPVCpipes100 mmdia (typeB) |
| 22 | Providing andfixing ofPVCpipes65 mmdia (typeB) |
| 23 | Providing andfixing ofPVCtea100 x10x100mmdai(typeB) |
| 24 | Providing andfixing ofPVCtea 65x65 x 65 mm dia(typeB) |
| 25 | Providing andfixing ofPVCplain bend100 mm dia(typeB) |
| 26 | Providing andfixing ofPVCplain bend 65mm dia(typeB) |
| 27 | Providing andfixing ofPVCdoor bend 65mm dia (typeB) |
| 28 | Providing andfixing ofPVCdoor bend 65mm dia(typeB) |
| 29 | Providing andfixing ofPVCP trap 100mmdia(typeB) |
| 30 | Providing andfixing ofPVCtea bend100x65 mm dia (typeB) |
| 31 | Providing andfixing ofPVCtea bend65x65 mm dia (typeB) |
| 32 | Providing andfixing ofPVC Flowtap (typeB) |
| 33 | Providing andfixing of gascup 100 mm dia (typeB) |
| 34 | Providing andfixing of gascup 65 mm diamm dia(typeB) |
| 35 | Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour:Waste coupling 38mm of 83 mm length and 77 mm breadth weighing not less than 60gms. |
| 36 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 12:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 37 | Providing and fixing M.S. stays and clampsfor sandcastiron100 mm |
| 38 | Providing and fixing M.S. stays and clampsfor sandcastiron75 mm |
| 39 | Cutting chases in brick masonry walls for sand cast iron / centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6. 100 mm dia. |
| 40 | Cutting chases in brick masonry walls for sand cast iron / centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6.75 mm dia. |
| 41 | Providing and fixing 35 mm thickwire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butthinges bright finished of required size with necessary screws as per direction ofEngineer-in-chargeusingSecond class deodar wood |
| 42 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete.250x10 mm |
| 43 | Providing and fixing bright finished brass door latch with necessary screws etc. complete. : 300x16x5 mm |
| 44 | Providing and fixing 125 mm bright finished brass handles with screws etc. complete |
| 45 | French spirit polishing, Two or more coats on new works including a coat of wood filler |
| 46 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture |
| 47 | Providing and fixing PTMT grating of approved quality and colour 150 mm nominal size square 100 mm diameter of the inner hinged round grating. |
| 48 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: in all kinds ofsoils |
| 49 | Desmentilling of GI pipes 15 mmto40 mm nominal bore |
| 50 | Providing and fixingof 15 mm dia GI pipescompletewith G.Ifittingsandearthwork etc |
| 51 | Providing and fixingof 20 mmdia GI pipescompletewith G.Ifittingsandearthwork etc |
| 52 | Providing and fixingof 25mm dia GI pipescompletewith G.Ifittingscompleteandearthwork etc25 mm dai |
| 53 | laying andfitiingof GI pipe25 mmdia |
| 54 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 55 | Carriage ofsandandBajriat an averagedistance of 200 mby headload |
AI Tender Summary
Tender Timeline
Aug 16, 2022
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 16, 2022
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Aug 20, 2022
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
CompletedAug 20, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 22, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender