Construction Of Multi-Storey Shopping Complex / Parking Near Police Station At Nagar Panchayat Satpuli
Tender Value
2.60 Crore
Estimated cost
Bid Submission
12 Aug 2022
0 days left
EMD
5.20 Lakhs
Bank guarantee accepted
Document Fee
5900
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
satpuli → Uttarakhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Multi-Storey Shopping Complex / Parking Near Police Station At Nagar Panchayat Satpuli
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 05-Aug-2022 | Date Corrigendum | Date | 12-Aug-2022 |
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (HydraulicExcavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil asdirected, within a lead of 50 m for all Kinds of soil by the direction in Engineer - in - charge work to be execuated as per specification a rate of above given item |
| 2 | Providing and laying in position cement concrete of specified gradeexcluding the cost of centring and shuttering. All work upto plinth level. 1:3:6(1Cement:3coarsesand:6gradedstone aggregate 40 mm nominal size). |
| 3 | Providing and laying in position cement concrete of specified gradeexcluding the cost of centring and shuttering - -All work upto plinth level 1:4:8(1Cement:4finesand:8gradedstoneaggregate 40 mm nominal size). by the direction in Engineer - in - charge work to be execuated as per specification a rate of above given item |
| 4 | Brick work with F.P.S. bricks of class designation 75 in foundationand plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) by the direction in Engineer - in - charge work to be execuated as per specification a rate of above given item |
| 5 | Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes inCement mortar 1:6 (1 cement : 6 coarse sand) by the direction in Engineer - in - charge work to be execuated as per specification a rate of above given item |
| 6 | Half brick masonry with F.P.S. bricks of class designation 75 insuperstructure above plinth level upto floor V level inCement mortar 1:4 (1 cement : 4 coarse sand) by the direction in Engineer - in - charge work to be execuated as per specification a rate of above given item |
| 7 | Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering,shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.All works upto plinth level |
| 8 | Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering,shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.All works Above plinth level to floor level V |
| 9 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size). |
| 10 | Reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete.Thermo-Mechanically Treated bars. by the direction in Engineer - in - charge work to be execuated as per specification a rate of above given item |
| 11 | Centring and shuttering including strutting,ropping etc. andremoval of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers . by the direction in Engineer - in - charge work to be execuated as per specification a rate of above given item |
| 12 | Centring and shuttering including strutting,ropping etc. andremoval of form for Suspendedfloors,roofs,landings,balconiesandaccess platform. by the direction in Engineer - in - charge work to be execuated as per specification a rate of above given item |
| 13 | Centring and shuttering including strutting,ropping etc. andremoval of form for Columns, Pillars, Piers, Abutments, Posts and Struts. by the direction in Engineer - in - charge work to be execuated as per specification a rate of above given item |
| 14 | Providing and fixing pressed steel door frames confirming to IS: 43 from commercial mild steel sheet of 1.25 mm thickness including h jamb, bead and if required angle threshold of mild steel angle of se or base ties of 1.25mm pressed mild steel welded or rigidly fixed t mechanical means, adjustable lugs with split end tail to each jambbutt hinges 2.5mm thick with mortar guards, lock strike-plate andas specified and applying a coat of approved steel primer after pre surface as directed by Engineer-in-charge. Profile B |
| 15 | Steel work welded in built up section/framed work including cutting in position and applying a priming coat of approved steel primer us required. Ingratings,frames,guardbar,ladder,railings,brackets,gates and similar works. |
| 16 | Providing and laying cement concrete in retaining walls, returnwalls (any thickness) including attached pilasters, columns, piers, abutmets, pillars,posts, struts, buttresses, string or lacing courses, parapets, coping bed blocks,anchor blocks, plain window sills, fillets etc upto floor five level, excluding the costof centring, shuttering and finishing 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) by the direction in Engineer - in - charge work to be execuated as per specification a rate of above given item |
| 17 | 15 mm cement plaster on rough side of single or half brick wall ofmix.1:6 (1 cement : 6 fine sand)by the direction in Engineer - in - charge work to be execuated as per specification a rate of above given item |
| 18 | 12 mm cement plaster of mix.1:6 (1 cement : 6 fine sand) by the direction in Engineer - in - charge work to be execuated as per specification a rate of above given item |
| 19 | Structuralsteelworkriveted,boltedorweldedinbuiltupsections,trussesandframedwork,includingcutting,hoisting,fixinginpositionand applying a priming coat of approved steel primer all complete: |
| 20 | Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20mm nominal size stone aggregate. |
| 21 | Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 22 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design. In 75x75 mm deep chase |
| 23 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete |
| 24 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. |
| 25 | Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x1.25 mm M.S. laths with 1.25 mm thick top cover. |
| 26 | Kota stone slab flooring over 20 mm (average) thick base laid overjointedwith grey cement slurry mixed with pigment tomatch theoftheslabincludingrubbingandpolishingcompletewithba cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick. |
| 27 | Marble stone flooring with 18mm thick marble stone (sample of marble shall be approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with :Udaipur green marble |
| 28 | ProvidingandfixingIstqualityceramicglazedwalltilesconf IS : 15622 (thicknessto be specified by the manufacture ) of appr make in all colours, shades except burgundy, bottle green, black ofsizeas approvedbyEngineer-in-Charge inskirting, risersof ste dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 c sand)and jointingwith [email protected] persqmi pointinginwhitecementmixedwithpigmentofmatchingsh complete. |
| 29 | Providing and fixing ISI marked flush door shutters conforming toIS: 2202 (Part I) non-decorative type, core of block board construction with frameof 1st class hard wood and well matched commercial 3 ply veneering with verticalgrains or cross bands and face veneers on both faces of shutters.35 mm thick including ISI marked Stainless Steel butt hinges withnecessary screws. by the direction in Engineer - in - charge work to be execuated as per specification a rate of above given item |
| 30 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thick tobespecifiedbythemanufacturer)of1stqualityconformin 15622 ofapprovedmake in colourssuch asWhite, Ivory,Grey,RedBrown,laidon20mmthickCementMortar1:4(1Ce Coarsesand)includingpointingthejointswithwhitecement matching pigment etc., complete. |
| 31 | Providing and fixing aluminium sliding door bolts ISI marked anodi coating not less than grade AC 10 as per IS : 1868) transparent orcolour or shade with nuts and screws etc. complete. 300x16 mm |
| 32 | Providing and fixing aluminium handles ISI marked anodised (anod less than grade AC 10 as per IS : 1868) transparent or dyed to req shade with necessary screws etc. complete : 125 mm |
| 33 | Providing and fixing aluminium tower bolts ISI marked anodised (a not less than grade AC 10 as per IS : 1868 ) transparent or dyed t or shade with necessary screws etc. complete. 250x10 mm |
| 34 | Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed torequired colour and shade with necessary screws etc. Complete, single rubber stopper |
| 35 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade |
| 36 | Finishing walls with textured exterior paint of required shade. New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm. |
| 37 | PaintingwoodworkwithDeluxeMultiSurfacePaintofrequired shade.Twoor more coat applied @0.90ltr/[email protected]/10sqm ofapproved brand or manufacture. as per direction ofEngineer-in-charge, work to be execuated as per specification a rate of above given item |
| 38 | PaintingSteel workwithDeluxeMultiSurface Paintto givean even shade. Two or morecoatapplied @0.90 ltr/10sqmover an under coatof [email protected]/10sqmofapproved brand or manufacture. as per direction ofEngineer-in-charge, work to be execuated as per specification a rate of above given item |
| 39 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows alll complete. With 4.0 mm thick glass panes. |
| 40 | Windows using galvanised M.S. wire gauge with average width of a in both directions with wire of dia. 0.63 mm. With 12 mm mild steel U beading. |
| 41 | Providing and fixing ball bearing for rolling shutters. |
| 42 | Grading roof for water proofing treatment with Cementconcrete1:2:4(1cement:2coarsesand:4graded stone aggregate 20 mm nominal size) |
| 43 | Honey Comb Brick Work 10/11.4 cm thick with brick of class 75 Cement mortar 1:4(1 cement : 4 coarse sand ) |
| 44 | 12 mm cement plaster finished with a floating coat of neat cement of mix : 1:3 (1 cement: 3 fine sand) |
| 45 | Providing and fixing in position pre-cast R.C.C manhole cover and frame of required shape and approved quality 19.19.1 l d-2.5 Rectangular shape 600x450 mm internal dimansions |
| 46 | Excavation in Hilly Areas in Soil by mechanical means Excavation in soil in Hilly Area by mechanical means including cutting and trimming of side slopes and disposing of excavated earth with a lift upto 1.5 m and a lead upto 20 m as per Technical Specification Clause 1603.1 |
| 47 | Removal of Unsuitable Soil with Disposal upto 2000 m Removal of unsuitable soil including excavation, loading and disposal upto 1000 m lead but excluding compaction ground supporting embankment subgrade replacement by suitable soil, which shall be paid separately as per Clause 303.5.2 as per Technical Specification Clause 302.3.11 |
| 48 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion, (i) Single socketed pipes as per direction ofEngineer-in-charge, work to be execuated as per specification a rate of above given item (110 mm diameter ) |
| 49 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion, (i) Single socketed pipes as per direction ofEngineer-in-charge, work to be execuated as per specification a rate of above given item (75 mm diameter ) |
| 50 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS :13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. as per direction ofEngineer-in-charge, work to be execuated as per specification a rate of above given item Bend 87.5°(110 mm bend ) |
| 51 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS :13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. as per direction ofEngineer-in-charge, work to be execuated as per specification a rate of above given item Bend 87.5°(75 mm bend ) |
| 52 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS :13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. as per direction ofEngineer-in-charge, work to be execuated as per specification a rate of above given item Coupler110 mm |
| 53 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS :13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. as per direction ofEngineer-in-charge, work to be execuated as per specification a rate of above given Shoe (Plain) 110 mm Shoe |
| 54 | Providing and fixing unplasticised -PVC pipe clips of approved each design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4coarse sand) and making good the wall etc. complete. 110 mm. as per direction ofEngineer-in-charge, work to be execuated as per specification a rate of above given |
| 55 | Providing and fixing to the inlet mouth of rain water pipe each cast iron grating 15 cm diameter and weighing not less than 440 grams. as per direction ofEngineer-in-charge, work to be execuated as per specification a rate of above given |
| 56 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required. One urinal basin with 5 litre white P.V.C. automatic flushing cistern |
| 57 | Providingandfixingwhitevitreouschinapedestaltypewater closet(EuropeantypeW.C.pan)withseatandlid,10litrelow levelwhiteP.V.C.flushingcisternwithmanuallycontrolleddevice(handle lever), conforming to IS : 7231,with all fittings and fixtures completeincludingcutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid |
| 58 | Providing and fixing watercloset squatting pan(Indian type W.C.pan )with 100mm sand castIronP or S trap, 10 litre lowlevelwhite P.V.C.flushingcisternwithmanuallycontrolleddevice(handlelever)conforming to IS : 7231,with all fittings and fixtures completeincludingcutting and making good the walls and floors wherever required :WhiteVitreouschinaOrissapatternW.C.panofsize580x440mm with integral type foot rests as per direction ofEngineer-in-charge, work to be execuated as per specification a rate of above given |
| 59 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32. White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps |
| 60 | Providingandfixingwhitevitreouschinapedestalforwashb completely recessed at the back for the reception of pipes and fitting. |
| 61 | Providing and fixing G.I. pipes complete with G.I. fittings andclamps, including cutting and making good the walls etc. internal work - Exposed onwall 15 mm dia. nominal bore |
| 62 | Providing and fixing G.I. pipes complete with G.I. fittings includingtrenching and refilling etc. (external work) 15 mm dia. nominal bore |
| 63 | Providing and fixing G.I. pipes complete with G.I. fittings includingtrenching and refilling etc. (external work) 20 mm dia. nominal bore |
| 64 | Making connection of G.I. distribution branch with G.I. main offollowing sizes by providing and fixing tee, including cutting and threading the pipeetc. complete. 25 to 40 mm nominal bore |
| 65 | Providing and fixing C.P. brass Long Body bib cock of approved quality weight not Less then 690 gmconforming to IS:8931. 15 mm nominal bore |
| 66 | Providing and fixing C.P. brass angle valve for basin mixer and geyser approved quality conforming to IS:8931.15 mm nominal bore |
| 67 | Providing and fixing Stainless Steel AISI 304 (18/8) kitchen sink as per IS 13983 Kitchen Sink without drain board610x510 bowl with 200 mm bowl depth |
| 68 | Providing and placing on terrace (at all floor levels) polyethylene water tank ISI : 12701 marked with cover and suitable locking arrangement in tank. and necessary holes for inlet, outlet and overflow pipes but without fitting base support for tank. |
| 69 | Providing and fixing PTMT soap Dish Holder having length of 138m 102mm, height of 75mm with concealed fitting arrangements weig than 106 gms. |
| 70 | Providing and fixing 600x450 mm bevelled edge mirror of superiorquality) complete with 6 mm thick hard board ground fixed to woo C.P. brass screws and washers complete. |
| 71 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden. 600mm long towel rail with total length of 645mm, width 78mm and effective height of 88mm, weighing not less than 190gms. |
| 72 | Providing and fixing uplasticised PVC connection pipe with brass unions. 45 cm length. 15 mm nominal bore. |
| 73 | Providing and fixing PTMT grating of approved quality and colour.Circular type.100 mm nominal dia. |
| 74 | Providing and fixing ball valve (brass) of approved quality complete. High or low pressure with plastic floats. 15 mm nominal bore |
| 75 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse Inside size 90x80 cm and 0.45 cm deep i/c with FPS brick with class designation 75 |
| 76 | Providing and fixing square-mouth S.W. gully trap grade ‘A” complete with C.I. 100x100 mm size p type with FPS pipe class 75 mm |
| 77 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 meter long with S.S triangular plate of Europion type W.C of quality and make as approved by Engineer in charge |
| 78 | Providing & Fixing PTMT Towel Ring 450mm long towel rail with total length of 495mm, 78mm wide and effective height of 88mm, weighing not less than 170gms. |
| 79 | Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey with F.P.S Brick |
AI Tender Summary
Tender Timeline
Aug 05, 2022
11:30 IST
Tender Published
Tender notice published.
Completed
Aug 12, 2022
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedAug 12, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 12, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender