Various Development Work In 15 Fc At-Tulshi Tal-Madha Name Of Work As Per Nit And Boq
Tender Value
14.76 Lakhs
Estimated cost
Bid Submission
05 Aug 2022
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
tulshi → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Various Development Work In 15 Fc At-Tulshi Tal-Madha Name Of Work As Per Nit And Boq
BOQ
| Sl. No. | Item Description |
| 1 | Name of Scheme - 01.Constructing Sanitation Arragenment at Tulshi (Magaswargiya Wasti II) Tal. Madha Dist.Solapur. |
| 2 | Item No. 1 :- Excavation for foundation / pipe trenches in earth soils of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 meters and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete (lift 0 to 1.5 M) |
| 3 | MJP. DSR. 2020-21 (P.43 / I. 1 |
| 4 | Item No. 2 :- Excavation for foundation / pipe trenches in hard murum including removing the excavated material up to a distance of 50M and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete.(lift 0 to 1.5M) |
| 5 | MJP. DSR. 2020-21 (P.43 / I. 2 ) |
| 6 | Item No. 3 :- Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt roadincluding removing the excavated material up to a distance of 50 metersand lifts as below, stackingand spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete (lift upto0 to 1.5 M) |
| 7 | MJP. DSR. 2020-21 (P.43 / I. 5 ) |
| 8 | Item No.4 :- Filling in plinth and floors murum bedding in trenches with approved murum from excavated materials from foundation 15cm to 20cm layers including watering and compaction complete. |
| 9 | MJP. DSR. 2020-21 (P.46 / I. 16 ) |
| 10 | Item No.5 :- Providing and supplying in standard lengths ISI mark rigid unplastised PVC for patable water with rubber ring joints including cost of rubber ring as per IS-4985-1998, all local and central taxes, transportation, freight charges, transit insurance, inspection charges, loading, unloading, conveyance to store/site and stacking the same in closed shed duly protected from sun rays and rains, etc. complete ( with third party inspection ) (socketed) |
| 11 | 75 mm Dia. 4Kg/cm2 |
| 12 | Item No.6 :- Lowering, laying and jointing PVC pipes and specials of following class and diameter including cost of conveyance from stores to site of works including cost of all labour, material, except cement solvent, giving satisfactory hydraulic testing as per IS code, etc. complete. |
| 13 | MJP. DSR. 2020-21 (P.94 / I. 3 B ) |
| 14 | 75 mm Dia. 4Kg/cm2 |
| 15 | Item No. 7 :- Providing ISI standard R.C.C. pipes in standard lengths of following class and diameter suitable for either collar joints or rubber ring joints, including all taxes (Central and local), inspection charges, transport to departmental stores/site, unloading and stacking etc. complete. |
| 16 | 200 mm Dia.RCC Pipe NP 2 |
| 17 | 450 mm Dia.RCC Pipe NP 2 |
| 18 | Item No.8:- Lowering, laying and jointing in proper grade and alignment R.C.C. pipes with collar joints in C.M.1:1 proportion or socketed R.C.C. pipes with rubber joints (excluding cost of rubber ring or R.C.C. collar,) including cost of conveyance from stores to site of work, cost of jointing material, labour, giving hydraulic testing etc. complete as directed by Engineer-in-charge (For all class of pipes.) Collar Joints. |
| 19 | 200 mm Dia.RCC Pipe NP 2 |
| 20 | 450 mm Dia.RCC Pipe NP 2 |
| 21 | Item No. 9 :- Providing andconstructing B./B. masonry valve chamber with 15 cm thick 1:3:6 proportion PCC bedding additional excavation B.B. masonry in CM 1:5 cm thick precast RCC frames and cover etc. complete as directed by engineer in charge. |
| 22 | Size 0.6 x 0.45 x 0.9 M |
| 23 | Item No. 10:- Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging etc. complete. |
| 24 | MJP. DSR. 2020-21 (P.53 / I. 1 ) |
| 25 | GST 12% |
| 26 | Name Of Work:- 02.Constructing Sanitation Arragenment at Tulshi (Magaswargiya Wasti III) Tal. Madha Dist.Solapur.Tal. Madha Dist.Solapur. |
| 27 | Item No. 1 :- Excavation for foundation / pipe trenches in earth soils of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 meters and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete (lift 0 to 1.5 M) |
| 28 | MJP. DSR. 2020-21 (P.43 / I. 1 |
| 29 | Item No. 2 :- Excavation for foundation / pipe trenches in hard murum including removing the excavated material up to a distance of 50M and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete.(lift 0 to 1.5M) |
| 30 | MJP. DSR. 2020-21 (P.43 / I. 2 ) |
| 31 | Item No. 3 :- Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt roadincluding removing the excavated material up to a distance of 50 metersand lifts as below, stackingand spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete (lift upto0 to 1.5 M) |
| 32 | MJP. DSR. 2020-21 (P.43 / I. 5 ) |
| 33 | Item No.4 :- Filling in plinth and floors murum bedding in trenches with approved murum from excavated materials from foundation 15cm to 20cm layers including watering and compaction complete. |
| 34 | MJP. DSR. 2020-21 (P.46 / I. 16 ) |
| 35 | Item No.5 :- Providing and supplying in standard lengths ISI mark rigid unplastised PVC for patable water with rubber ring joints including cost of rubber ring as per IS-4985-1998, all local and central taxes, transportation, freight charges, transit insurance, inspection charges, loading, unloading, conveyance to store/site and stacking the same in closed shed duly protected from sun rays and rains, etc. complete ( with third party inspection ) (socketed) |
| 36 | 75 mm Dia. 4Kg/cm2 |
| 37 | Item No.6 :- Lowering, laying and jointing PVC pipes and specials of following class and diameter including cost of conveyance from stores to site of works including cost of all labour, material, except cement solvent, giving satisfactory hydraulic testing as per IS code, etc. complete. |
| 38 | MJP. DSR. 2020-21 (P.94 / I. 3 B ) |
| 39 | 75 mm Dia. 4Kg/cm2 |
| 40 | Item No. 7 :- Providing ISI standard R.C.C. pipes in standard lengths of following class and diameter suitable for either collar joints or rubber ring joints, including all taxes (Central and local), inspection charges, transport to departmental stores/site, unloading and stacking etc. complete. |
| 41 | 450 mm Dia.RCC Pipe NP 2 |
| 42 | Item No.8:- Lowering, laying and jointing in proper grade and alignment R.C.C. pipes with collar joints in C.M.1:1 proportion or socketed R.C.C. pipes with rubber joints (excluding cost of rubber ring or R.C.C. collar,) including cost of conveyance from stores to site of work, cost of jointing material, labour, giving hydraulic testing etc. complete as directed by Engineer-in-charge (For all class of pipes.) Collar Joints. |
| 43 | 450 mm Dia.RCC Pipe NP 2 |
| 44 | Item No. 9 :- Providing andconstructing B./B. masonry valve chamber with 15 cm thick 1:3:6 proportion PCC bedding additional excavation B.B. masonry in CM 1:5 cm thick precast RCC frames and cover etc. complete as directed by engineer in charge. |
| 45 | Size 0.6 x 0.45 x 0.9 M |
| 46 | Item No. 10:- Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging etc. complete. |
| 47 | MJP. DSR. 2020-21 (P.53 / I. 1 ) |
| 48 | GST 12% |
| 49 | Name Of Wiork:- 03.Constructing Water Supply Scheme at Tulshi (Gend Wasti School & Anganwadi) Tal. Madha Dist.Solapur.Tal. Madha Dist.Solapur. |
| 50 | Subwork:- Borewell |
| 51 | Item No 1 :- Drilling 150 mm Dia. Bore with drilling machinary as per G.S.D.A. Certificate...etc. Complete. |
| 52 | Item No 2 :- Providing & Fixing 180mm dia Casing pipe up to loose strata |
| 53 | Item No 3 :-Taking yield test as per GSDA Suggestions |
| 54 | Item No 4 :- Bore Well Cap |
| 55 | Item No 5 :- Initial Survey of Finalising the point of Bore by G.S.D.A.in Charge officer . |
| 56 | Subwork:-Pumping Machinery |
| 57 | Item No.1 :- Providing ,erecting and giving test of 150 mm dia Submersible pumpset confirming to I.S 8034 and I.S 9283 Pump shall be suitable various delvery head and discharge with stainless steel pump shaft and bronze impeller Motor suitable for working on 415 V+/- 10% 3 Ph 50 Htz A.C. supply .Cable guard thrust carbone fibre bearing to accept entire hydroulic thrust waterproof winding shall be provided.The pump shall have suitable for direct coupling.The pump shall have suitable outlet as per manufactures design.Antithrust stream lined non return valve shall be provided with pump .Suitable suction strainer shall also be Provided 3 Core Single/Double run copper conductor submersible along with the pump rates as per pump upto 8 stage 1.5 HPSubmersible Pump |
| 58 | Item No2 :-Providing and supplying in standard lengths Polyethelene Pipes , confirming to I.S. 4984 / 14151 / 12786 / 13488 with necessary jointing material like mechanical connectors I.e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint , including all local & central taxes , transportation & freight charges , inspection charges , loading / unloading charges , conveyance to the departmental stores / site & stacking the same in closed shade duely protecting from sunrays & rains , etc. complete.HDPE 63 mm 6 kg |
| 59 | Item No 3:- Panel Fabrication - M.S sheet of thicknes below to be used for fabrication of boxes. Panel board etc. including cutting,bending,drilling,welding, cleaning,derusting and painting with one coats of enamel paint 16 SWG |
| 60 | Item N0.4:- Supplying and errecting plain copper conductor PVC Insulated flexible cable as per I.S 694/1990 of following grade upto 1100 volts3 Core 4 Sq mm |
| 61 | Item No. 5-Supplying and erecting D.O.L starter to operate squirrel cage induction Motor on 400 V.3 Phase 50 Htz with no volts coil and overload element with necessary material and connected to supply etc. complete .Starter with orignal sheet encloser. |
| 62 | Sub Work :- Katta & HDPE Tank |
| 63 | Item No. 1 :- Excavation for foundation / pipe trenches in earth soils of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 meters and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete (lift 0 to 1.5 M) |
| 64 | Item No. 2 :- Excavation for foundation / pipe trenches in hard murum including removing the excavated material up to a distance of 50M and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete.(lift 0 to 1.5M) |
| 65 | Item No. 3 :- Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt roadincluding removing the excavated material up to a distance of 50 metersand lifts as below, stackingand spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete (lift upto0 to 1.5 M) |
| 66 | Item No. 4 :- Providing & Fixing in position HDPE Tank for drinking water purpose with all necessary fittings as directed by Engineer - in- charge . |
| 67 | Item No.6 :-Providing UCR (1:6 with 30% morter) of genesis stones in cement mortar proportion as below in foundation and plinth of inner walls or in plinth of external walls including bailing out water manually striking out joints on unexposed faces including providing headers/ bond stone as required etc. complete. |
| 68 | Item No.7 :-Providing dry trap / granite / quartzite / gneiss, rubble stone soling in 15cm to 20cm thick layers (including hand packing and compacting) etc. complete |
| 69 | Item No.8 :- Providing and laying in situ cement concrete M10/ M 15 /1:2:4 of trap/granite /quartzite/ gneiss metal for foundation and bedding including bailing out water manually formwork, compacting, covring newly laid concrete by gunny bag, plastic or tarpaulin, curing etc. complete. |
| 70 | PCC M10 at Foundation |
| 71 | PCC M15 in Plinth |
| 72 | Item No. 10 :- Providing andfixing screw down bib/stop tap of brass including necessary union nut, testing etc. complete. |
| 73 | Item No. 11 :- Providing andlaying in situ cc 1.:6 cement pointing .. etc. complete. |
| 74 | Item No. 12 :- Providing & fixing MS angle 35 x 35 x 3 mm size, including cutting & fabricating, as directed by engineer in- charge 3.00 x 4 nos. =12 |
| 75 | Item No. 13 :- GI Sheet 22 BWG Providing supplying GI Sheet . |
| 76 | Item No. 14 :- Providing and & fixing on Walls / celling/ floor 15 mm dia CPVC Pipe With Necessary fitting , remaking good the demolished portion etc.complete . 15 MM |
| 77 | Sub Work :- R O Filter |
| 78 | Item No. 1 :- Providing, supplying fixing R.o + UV system for purifying water ..including all taxesetc. complete.. |
| 79 | 25 Litres / Hour For School & Anganwadi RO Unit 25 Ltr. Each |
| 80 | GST 12% |
| 81 | Name Of Wiork:- 04.Constructing Water Supply Scheme at Tulshi (Khandekar Wasti School & Anganwadi) Tal. Madha Dist.Solapur.Tal. Madha Dist.Solapur. |
| 82 | Subwork:- Borewell |
| 83 | Item No 1 :- Drilling 150 mm Dia. Bore with drilling machinary as per G.S.D.A. Certificate...etc. Complete. |
| 84 | Item No 2 :- Providing & Fixing 180mm dia Casing pipe up to loose strata |
| 85 | Item No 3 :-Taking yield test as per GSDA Suggestions |
| 86 | Item No 4 :- Bore Well Cap |
| 87 | Item No 5 :- Initial Survey of Finalising the point of Bore by G.S.D.A.in Charge officer . |
| 88 | Subwork:-Pumping Machinery |
| 89 | Item No.1 :- Providing ,erecting and giving test of 150 mm dia Submersible pumpset confirming to I.S 8034 and I.S 9283 Pump shall be suitable various delvery head and discharge with stainless steel pump shaft and bronze impeller Motor suitable for working on 415 V+/- 10% 3 Ph 50 Htz A.C. supply .Cable guard thrust carbone fibre bearing to accept entire hydroulic thrust waterproof winding shall be provided.The pump shall have suitable for direct coupling.The pump shall have suitable outlet as per manufactures design.Antithrust stream lined non return valve shall be provided with pump .Suitable suction strainer shall also be Provided 3 Core Single/Double run copper conductor submersible along with the pump rates as per pump upto 8 stage 1.5 HPSubmersible Pump |
| 90 | Item No2 :-Providing and supplying in standard lengths Polyethelene Pipes , confirming to I.S. 4984 / 14151 / 12786 / 13488 with necessary jointing material like mechanical connectors I.e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint , including all local & central taxes , transportation & freight charges , inspection charges , loading / unloading charges , conveyance to the departmental stores / site & stacking the same in closed shade duely protecting from sunrays & rains , etc. complete.HDPE 63 mm 6 kg |
| 91 | Item No 3:- Panel Fabrication - M.S sheet of thicknes below to be used for fabrication of boxes. Panel board etc. including cutting,bending,drilling,welding, cleaning,derusting and painting with one coats of enamel paint 16 SWG |
| 92 | Item N0.4:- Supplying and errecting plain copper conductor PVC Insulated flexible cable as per I.S 694/1990 of following grade upto 1100 volts3 Core 4 Sq mm |
| 93 | Item No. 5-Supplying and erecting D.O.L starter to operate squirrel cage induction Motor on 400 V.3 Phase 50 Htz with no volts coil and overload element with necessary material and connected to supply etc. complete .Starter with orignal sheet encloser. |
| 94 | Subwork:- Handwash Station |
| 95 | Item No. 1 :- Providing and & fixing on Walls / celling/ floor 15 mm dia CPVC Pipe With Necessary fitting , remaking good the demolished portion etc.complete . 15 mm |
| 96 | Item No. 2 :- Providing and fixing 15mm dia. Screw down bib/stop tap of brass including necessacery socket union nut complete. |
| 97 | Item No 3:-Providing & Fixing in position HDPE Tank for drinking water purpose with all necessary fittings as directed by Engineer - in- charge . |
| 98 | Item No 4:-Providing and fixing coloured glazed earthenware Wash Hand Basin of 55cm x 40 cm size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connection including P.V.C. waste pipe and trap up to the outside face of the wall. |
| 99 | GST 12% |
| 100 | Name Of Wiork:- 05.Constructing Water Supply Scheme at Tulshi (Mali Appa Devasthan) Tal. Madha Dist.Solapur.Tal. Madha Dist.Solapur. |
| 101 | Subwork:- Borewell |
| 102 | Item No 1 :- Drilling 150 mm Dia. Bore with drilling machinary as per G.S.D.A. Certificate...etc. Complete. |
| 103 | Item No 2 :- Providing & Fixing 180mm dia Casing pipe up to loose strata |
| 104 | Item No 3 :-Taking yield test as per GSDA Suggestions |
| 105 | Item No 4 :- Bore Well Cap |
| 106 | Item No 5 :- Initial Survey of Finalising the point of Bore by G.S.D.A.in Charge officer . |
| 107 | Subwork:-Pumping Machinery |
| 108 | Item No.1 :- Providing ,erecting and giving test of 150 mm dia Submersible pumpset confirming to I.S 8034 and I.S 9283 Pump shall be suitable various delvery head and discharge with stainless steel pump shaft and bronze impeller Motor suitable for working on 415 V+/- 10% 3 Ph 50 Htz A.C. supply .Cable guard thrust carbone fibre bearing to accept entire hydroulic thrust waterproof winding shall be provided.The pump shall have suitable for direct coupling.The pump shall have suitable outlet as per manufactures design.Antithrust stream lined non return valve shall be provided with pump .Suitable suction strainer shall also be Provided 3 Core Single/Double run copper conductor submersible along with the pump rates as per pump upto 8 stage 3 HPSubmersible Pump |
| 109 | Item No2 :-Providing and supplying in standard lengths Polyethelene Pipes , confirming to I.S. 4984 / 14151 / 12786 / 13488 with necessary jointing material like mechanical connectors I.e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint , including all local & central taxes , transportation & freight charges , inspection charges , loading / unloading charges , conveyance to the departmental stores / site & stacking the same in closed shade duely protecting from sunrays & rains , etc. complete.HDPE 63 mm 6 kg |
| 110 | Item No 3:- Panel Fabrication - M.S sheet of thicknes below to be used for fabrication of boxes. Panel board etc. including cutting,bending,drilling,welding, cleaning,derusting and painting with one coats of enamel paint 16 SWG |
| 111 | Item N0.4:- Supplying and errecting plain copper conductor PVC Insulated flexible cable as per I.S 694/1990 of following grade upto 1100 volts3 Core 4 Sq mm |
| 112 | Item No. 5-Supplying and erecting D.O.L starter to operate squirrel cage induction Motor on 400 V.3 Phase 50 Htz with no volts coil and overload element with necessary material and connected to supply etc. complete .Starter with orignal sheet encloser. |
| 113 | Sub Work :- Katta & HDPE Tank |
| 114 | Item No. 1 :- Excavation for foundation / pipe trenches in earth soils of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 meters and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete (lift 0 to 1.5 M) |
| 115 | Item No. 2 :- Excavation for foundation / pipe trenches in hard murum including removing the excavated material up to a distance of 50M and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete.(lift 0 to 1.5M) |
| 116 | Item No. 3 :- Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt roadincluding removing the excavated material up to a distance of 50 metersand lifts as below, stackingand spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete (lift upto0 to 1.5 M) |
| 117 | Item No. 4 :- Providing & Fixing in position HDPE Tank for drinking water purpose with all necessary fittings as directed by Engineer - in- charge . |
| 118 | Item No.6 :-Providing UCR (1:6 with 30% morter) of genesis stones in cement mortar proportion as below in foundation and plinth of inner walls or in plinth of external walls including bailing out water manually striking out joints on unexposed faces including providing headers/ bond stone as required etc. complete. |
| 119 | Item No.7 :-Providing dry trap / granite / quartzite / gneiss, rubble stone soling in 15cm to 20cm thick layers (including hand packing and compacting) etc. complete |
| 120 | Item No.8 :- Providing and laying in situ cement concrete M10/ M 15 /1:2:4 of trap/granite /quartzite/ gneiss metal for foundation and bedding including bailing out water manually formwork, compacting, covring newly laid concrete by gunny bag, plastic or tarpaulin, curing etc. complete. |
| 121 | PCC M10 at Foundation |
| 122 | PCC M15 in Plinth |
| 123 | Item No. 10 :- Providing andfixing screw down bib/stop tap of brass including necessary union nut, testing etc. complete. |
| 124 | Item No. 11 :- Providing andlaying in situ cc 1.:6 cement pointing .. etc. complete. |
| 125 | Item No. 13 :- GI Sheet 22 BWG Providing supplying GI Sheet . |
| 126 | GST 12% |
| 127 | Name Of Wiork:- 06.Constructing Water Supply Scheme at Tulshi (PHC) Tal. Madha Dist.Solapur.Tal. Madha Dist.Solapur. |
| 128 | Subwork:-Rebore |
| 129 | Item No 1 :- Rebore of existing bore at Tulshi PHCUse drilling Machine ….. Etc complete |
| 130 | Item No 2 :- Providing & Fixing 180mm dia Casing pipe up to loose strata |
| 131 | Item No 3 :-Taking yield test as per GSDA Suggestions |
| 132 | Item No 4 :- Bore Well Cap |
| 133 | Subwork:-Pumping Machinery |
| 134 | Item No.1 :- Providing ,erecting and giving test of 150 mm dia Submersible pumpset confirming to I.S 8034 and I.S 9283 Pump shall be suitable various delvery head and discharge with stainless steel pump shaft and bronze impeller Motor suitable for working on 415 V+/- 10% 3 Ph 50 Htz A.C. supply .Cable guard thrust carbone fibre bearing to accept entire hydroulic thrust waterproof winding shall be provided.The pump shall have suitable for direct coupling.The pump shall have suitable outlet as per manufactures design.Antithrust stream lined non return valve shall be provided with pump .Suitable suction strainer shall also be Provided 3 Core Single/Double run copper conductor submersible along with the pump rates as per pump upto 8 stage 3 HPSubmersible Pump |
| 135 | Item No2 :-Providing and supplying in standard lengths Polyethelene Pipes , confirming to I.S. 4984 / 14151 / 12786 / 13488 with necessary jointing material like mechanical connectors I.e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint , including all local & central taxes , transportation & freight charges , inspection charges , loading / unloading charges , conveyance to the departmental stores / site & stacking the same in closed shade duely protecting from sunrays & rains , etc. complete.HDPE 63 mm 6 kg |
| 136 | Item No 3:- Panel Fabrication - M.S sheet of thicknes below to be used for fabrication of boxes. Panel board etc. including cutting,bending,drilling,welding, cleaning,derusting and painting with one coats of enamel paint 16 SWG |
| 137 | Item N0.4:- Supplying and errecting plain copper conductor PVC Insulated flexible cable as per I.S 694/1990 of following grade upto 1100 volts3 Core 4 Sq mm |
| 138 | Item No. 5-Supplying and erecting D.O.L starter to operate squirrel cage induction Motor on 400 V.3 Phase 50 Htz with no volts coil and overload element with necessary material and connected to supply etc. complete .Starter with orignal sheet encloser. |
| 139 | Sub Work :- R O Filter |
| 140 | Item No. 1 :- Providing, supplying fixing R.o + UV system for purifying water ..including all taxesetc. complete.. |
| 141 | 25 Litres / Hour |
| 142 | Subwork:- Handwash Station |
| 143 | Item No. 1 :- Providing and & fixing on Walls / celling/ floor 15 mm dia CPVC Pipe With Necessary fitting , remaking good the demolished portion etc.complete . 25 mm |
| 144 | Item No. 2 :- Providing and fixing 15mm dia. Screw down bib/stop tap of brass including necessacery socket union nut complete. |
| 145 | Item No 3:-Providing & Fixing in position HDPE Tank for drinking water purpose with all necessary fittings as directed by Engineer - in- charge . |
| 146 | Item No 4:-Providing and fixing coloured glazed earthenware Wash Hand Basin of 55cm x 40 cm size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connection including P.V.C. waste pipe and trap up to the outside face of the wall. |
| 147 | GST 12% |
AI Tender Summary
Tender Timeline
Jul 22, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedAug 05, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 08, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender