Various Civil Works In Rajasthan Secretariat Under Sectt. Sub Div-I, Jaipur. ( 2059 Mtc And Repair ) V Providing And Laying In Position Cement Concrete Including Curing, Compaction Etc. Complete In Specified Grade Excluding The Cost Of Cente, jaipur-Rajasthan

Various Civil Works In Rajasthan Secretariat Under Sectt. Sub Div-I, Jaipur. ( 2059 Mtc And Repair ) V Providing And Laying In Position Cement Concrete Including Curing, Compaction Etc. Complete In Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level. M15 Grade Nominal Mix 1: 2: 4 ( 1 Cement : 2 Coarse Sand : 4 Graded Stoneaggregate 20Mm Nominal Size ) . 2 Providing And Laying In Position Cement Concrete Including Curing, Compaction Etc. Complete In Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level. M10 Grade Nominal Mix 1: 3: 6 ( 1 Cement : 3 Coarse Sand : 6 Graded Stoneaggregate 20Mm Nominal Size ) . 3 Brick Work With F.P.S. Bricks Of Class Designation 75 In Superstructure Above Plinth Level Upto Floor V Level In All Shapes And Sizes In :Cement Mortar 1 : 4 ( 1 Cement : 4 Coarse Sand ) 4 Half Brick Masonry In Superstructure , Above Plinth Level Upto Floor Vlevelusing Bricks Of Designation 75 Cement Mortar 1 : 4 ( 1 Cement : 4 Coarse Sand ) 5 Plaster On New Surface On Walls In Cement Sand Mortar 1:4 Including Rackingofjointsetc. Complete Fine Finish :25 Mm Thick. 6 Dismantling Tile Work In Floors And Roofs Laid In Cement Mortar Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Meter Lead:For Thickness Of Tiles 25Mm To 40Mm. 7 Demolishing R.C.C. Work Manually / By Mechanical Means Including Stacking Of Steel Bars And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Engineer-In-Charge. 8 Dismantling Old Plaster Or Skirting, Raking Out Joints And Cleaning The Surface For Plaster Including Disposal Of Rubbish To The Dumping Ground Within 50 Meter Lead. 9 Demolishing Stone Rubble Masonry Manually / By Mechanical Means Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Engineer-In-Charge:In Cement Mortar. 10 Kota Stone Slab Flooring 25 Mm Thick Over 20 Mm ( Average ) Thickbase Laid Over And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab Including Rubbing And Polishing Completewith Base Of Cement Mortar 1 : 4 ( 1 Cement : 4 Coarse Sand ) For Area Of Each Slab From 2001 To 5000 Sq.Cm 11 Providing And Fixing Designer Cement Concrete Polished Tiles Over 20Mm Average Thick Base Of Cm 1 :4 ( 1 Cement : 4 Sand ) Jointing With Cement Mortar 1 :2 ( 1Cement : 2 Sand ) With Pigment To Match The Shade Of The Tiles Complete With All Respect. ( As Per Is 1237:2012 ) 12 Grinding Of Existing Floor With60, 80, 120 And360 No. Carborundum Stoneincluding Cost Of Wax Polishing Complete : 13 Add Extra For Mirror Polishing On Existing Marble Work / Kota Stone Flooring Work Where Ever Required To Give High Gloss Finish Complete. 14 Repair Of Existing Steel Glazed Doors, Windows And Ventilator, Ms Sheet Door, Garge Doors, Compound Wall Gates Etc. By Welding Drilling Complete Include. Cost Of Welding Rods And Hire Charge Of Welding Meachine And Tp Etc Complete 15 Repair To Damaged Rcc Slabs, Beams And Columns Etc For Strengtheing With Cement Mortar 1 : 2 In Following Stepsi ) Choping Losse And Cracked Concrete To Required Depth, Cleaning The Exposed Surface Of Steel And Concrete With Wire Brush And Sand Papering , Cleaning Of Concrete Surface With Water As Necessary And Getting Dried.Ii ) Applying Epoxy Primer On The Exposed Steel Bars.Iii ) Applying Epoxy Hardener And Resin Mix ( As Per Manufectured S Specification ) On Concrete And Steel Bars With Brush.Iv ) Speading Dry Cement Mortar 1 : 2 Mix Over Epoxy Treated Wet Surface And Allow It To Dry For One Day.V ) Plastering The Surface With Cement Sand Mortar 1 : 3 Upto Depth Of 30Mm Complete.Vi ) Cure The Plastered Surface For 15 Days All Work Including Scaffolding Etc. Complete In All Respect. 16 Making The Opening Inmasonry Including Dismantling In Floor Or Walls By Cutting Masonry And Making Good The Damages To Walls, Flooring And Jambs Complete To Match Existing Surface I / C Disposal Of Mulba / Rubbish To The Nearest Municipal Dumping Ground.For Door / Windows / Clerestory Windows 17 Making Of Holein R.C.C. Slab / Wall / Beams And Masonary Wall ( Width Up To 450 Mm ) By Core Cutting Machine Complete As Per Direction Of Eidiameter Above 150Mm 18 Earth Work In Excavation By Mechanical Means ( Hydraulic Excavator ) / Manual Means In Foundation Trenches Or Drains ( Not Exceeding 1.5 M In Width Or 10 Sqm On Plan ) Including Dressing Of Sides And Ramming Of Bottoms, Lift Upto 1.5 M, Including Taking Out The Excavated Soil And Depositing And Refilling Of Jhiri With Watering & Ramming And Disposal Of Surplus Excavated Soil As Directed With In A Lead Of 50 Meter.All Kinds Of Soils 19 Providing And Fixing Steel Gate, Grating , And Grills Made Of Angles, Tees, Square Bars, Flats, Or Black Pipe With Holdfast And Fittings Complete As Per Design And Drawing Including Cutting Welding And Fabrication With Priming Coat Of Red Oxide 20 Extra If Square, Rectangular Hollow Tubelarsections Are Used Or Grill Made By Flats Onlyover Item No 9.8.1 21 Grading Roof For Water Proofing Treatment Withwater Proffing Compoundcement Concrete 1:2:4 ( 1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size ) 22 Providing Gola 75X75 Mm In Cement Concrete 1:2:4 ( 1 Cement : 2Coarse Sand : 4 Stone Aggregate 10Mm And Down Gauge ) Includingfinishing With Cement Mortar 1:3 ( 1 Cement : 3 Fine Sand ) As Per Standard Design : 23 Providing And Fixing In Cm 1 : 4 Double Paitam ( Rebated ) Stone Door Window And Ventilator Frames Of Approved Quarry :Size 125 X 100Mm 24 Carriage Of Material Building Rubbish Stone Metal ( Grit And Ballast Etc. ) Including Loading And Unloadingfor 20 Km. 25 Providing And Fixing Marble Stone Flooring Table Rubbed, 15-18 Mm Thick Over 20Mm ( Av. ) Thick Base Of Cm 1:4 ( 1 Cement : 4 Coarse Sand ) Jointing With White Cement Mortar 1:2 ( 1 White Cement : 2 Marble Dust ) With Pigment To Match The Shade Of The Marble Slab Including Grinding, Rubbing And Polishing Complete. Or Providing And Fixing Stone Slabs Table Rubbed, 15-18 Mm Thick In Walls, Steps, Pillars, Counters, Jambs, Shelves, Sills Etc. Laid On 12Mm ( Av. ) Thick Base Of Cm 1:3 ( 1 Cement : 3 Coarse Sand ) Jointing With White Cement Mortar 1:2 ( 1White Cement : 2 Marble Dust ) With Pigment To Match The Shade Of The Marble Slab Including Grinding, Rubbing And Polishing Complete. Makranaadanga .Above 3601 Cm2 Slabs 26 Providing And Fixing 1St Quality Mat Finished Ceremic Tile Size 300X300mm Confirmingto Is : 13755 And Is : 15622 Colour Such As White, Grey, Ivory, Fume Red Brown, Light Green, Light Blue And Other Light Shades In Floors, Steps, Pillars Etc. Laid On A Bed Of Neat Cement Slurry Finished With Flush Pointing In The White Cement Mixed With Pigment To Match The Shade Of The Tile Complete ( Including The Cost Of Cement Mortar Bed 1:4 ) . 27 Extraforusingmarbleprinted / Graniteshadeordarkshadetilesinsteadofwhite, Grey, Ivory, Fumeredbrown, Lightgreen, Lightblueandotherlightshadesinandmatfinishedtiles. 28 Extraforusing 400Mm X 400Mm Mat Finishedtiles In Place Of 300Mm X 300Mm Size. 29 Add Extra For Fixing Glazed / Ceramic / Vitrified Floor Tiles With Cement Based High Polymer Modified Quick-Set Tile Adhesive ( Water Based ) Conforming To Is: 15477 , Using 5Kg. Adhesive Per Sqm Of Tile Area, In Average 3Mmthickness Instead Of Cement Mortar. 30 P & F 1St Qualityheavy Duty Vitrified Polished Digital Tiles On Floor, Skirting And Steps Etc.In Different Sizes ( Thickness Minimum 10Mm ) With Water Absortion Less Than Or Equal 0.08% And Conforming To Is 15622 Of Approved Make In All Colour And Shade, Laid With 20 Mm Thick Cm 1: 4 Including Grounting The Joints With White Cement And Matching Pigment Etc Complete.Size 600Mm X 600Mm 31 Providing And Fixing Marble Stone Flooring Table Rubbed, 15-18 Mm Thick Over 20Mm ( Av. ) Thick Base Of Cm 1:4 ( 1 Cement : 4 Coarse Sand ) Jointing With White Cement Mortar 1:2 ( 1 White Cement : 2 Marble Dust ) With Pigment To Match The Shade Of The Marble Slab Including Grinding, Rubbing And Polishing Complete. Or Providing And Fixing Stone Slabs Table Rubbed, 15-18 Mm Thick In Walls, Steps, Pillars, Counters, Jambs, Shelves, Sills Etc. Laid On 12Mm ( Av. ) Thick Base Of Cm 1:3 ( 1 Cement : 3 Coarse Sand ) Jointing With White Cement Mortar 1:2 ( 1White Cement : 2 Marble Dust ) With Pigment To Match The Shade Of The Marble Slab Including Grinding, Rubbing And Polishing Complete.Keseriaji / Abu Ambaji ( Green Marble ) Above 3601 Cm2 Slabs 32 Providing And Fixing Granite Stone Slab Mirror Polished And Machine Edge Cut In Walls, Pillars, Steps, Shelves, Sills Counters, Floors Etc. Laid On 12Mm ( Av. ) Thick Base Of Cement Mortar 1:3 ( 1 Cement : 3 Coarse Sand ) Jointing With White Cement Mortar 1:2 ( 1White Cement : 2 Marble Dust ) With Pigment To Match The Shade Of The Marble Slab Including Grinding, Rubbing And Polishing Complete.Jhunjhunu / Jalore ( Red / Choclate / Black / Pink Colour ) Above 3601 Cm2 Slabs 33 Extra For Providing Edge Moulding To 15-18Mm Thick Marble / Granite / Kota Stone Counters, Vanities Etc. Including Machine Polishing To Edge To Give High Gloss Finish Etc. Complete As Per Design Approved By Engineer-In-Charge. Marble Workfull Edge Moulding 34 Extra For Providing Edge Moulding To 15-18Mm Thick Marble / Granite / Kota Stone Counters, Vanities Etc. Including Machine Polishing To Edge To Give High Gloss Finish Etc. Complete As Per Design Approved By Engineer-In-Charge. Granite / Kota Stone Workfull Edge Moulding 35 Random Rubble Stone Masonry For With Hard Stone In Foundation And Plinth In Cement Sand Mortar Above 30 Cm Thick Wall In:Cement Mortar 1:6 ( 1-Cement : 6-Sand ) . 36 Supplying And Fixing In Walls Machine Cut And Polished Stone Shelves, Tands Andin Cm 1:3 With Machine Cut Edges :Sand Or Other Approved Stone 50Mm Thick. 37 Supplying And Fixing Stone Lintels / Bed Plates Of Approvedquarryroughdressedincement Mortar 1:4 :Upto 15 Cm. Thick.

INR 500 /-

INR 17560.0 /-

INR 8.78 Lakhs /-

Name of Work: Various Civil Works in Rajasthan Secretariat Under Sectt. Sub Div-I, Jaipur. (2059 Mtc and Repair)

Sl. No.	Item Description
1	Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M15 grade Nominal Mix 1: 2: 4 (1 cement : 2 coarse sand : 4 graded stoneaggregate 20mm nominal size).
2	Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M10 grade Nominal Mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stoneaggregate 20mm nominal size).
3	Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in :Cement mortar 1 : 4 (1 cement : 4 coarse sand)
4	Half brick masonry in Superstructure , above plinth level upto floor Vlevelusing bricks of designation 75 Cement mortar 1 : 4 (1 cement : 4 coarse sand)
5	Plaster on new surface on walls in cement sand mortar 1:4 including rackingofjointsetc. complete fine finish :25 mm thick.
6	Dismantling tile work in floors and roofs laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 meter lead:For thickness of tiles 25mm to 40mm.
7	Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.
8	Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead.
9	Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge:In cement mortar.
10	Kota stone slab flooring 25 mm thick over 20 mm (average) thickbase laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing completewith base of cement mortar 1 : 4 (1 cement : 4 coarse sand)For area of each slab from 2001 to 5000 Sq.Cm
11	Providing and fixing designer cement concrete polished tiles over 20mm average thick base of CM 1 :4 (1 Cement : 4 sand) jointing with cement mortar 1 :2 ( 1cement : 2 sand) with pigment to match the shade of the tiles complete with all respect.( as per IS 1237:2012)
12	Grinding of existing floor with60, 80, 120 and360 No. Carborundum stoneincluding cost of wax polishing complete :
13	Add extra for mirror polishing on existing marble work/ Kota stone flooring work where ever required to give high gloss finish complete.
14	Repair of existing steel glazed doors, windows and ventilator, MS sheet door, garge doors, compound wall gates etc. by welding drilling complete include. Cost of welding rods and hire charge of welding meachine and TP etc complete
15	Repair to damaged RCC slabs, beams and columns etc for strengtheing with cement mortar 1 : 2 in following steps i) Choping losse and cracked concrete to required depth, cleaning the exposed surface of steel and concrete with wire brush and sand papering , cleaning of concrete surface with water as necessary and getting dried. ii) Applying Epoxy primer on the exposed steel bars. iii) Applying Epoxy hardener and resin mix (as per manufectured s specification) on concrete and steel bars with brush. iv)Speading dry cement mortar 1 : 2 mix over epoxy treated wet surface and allow it to dry for one day. v) Plastering the surface with cement sand mortar 1 : 3 upto depth of 30mm complete. vi) Cure the plastered surface for 15 days All work including scaffolding etc. complete in all respect.
16	Making the opening inmasonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete to match existing surface i/c disposal of mulba/ rubbish to the nearest municipal dumping ground. For door/windows/clerestory windows
17	Making of holein R.C.C. slab/wall/beams and masonary wall (width up to 450 mm) by core cutting machine complete as per direction of EIDiameter above 150mm
18	Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soils
19	Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide
20	Extra if square,rectangular hollow tubelarsections are used or grill made by flats onlyover item no 9.8.1
21	Grading roof for water proofing treatment withwater proffing compoundCement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
22	Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2coarse sand : 4 stone aggregate 10mm and down gauge) includingfinishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :
23	Providing and fixing in CM 1 : 4 double paitam (rebated) stone door window and ventilator frames of approved quarry :Size 125 x 100mm
24	Carriage of Material Building Rubbish Stone metal (Grit and ballast etc.)including loading and unloadingFor 20 Km.
25	Providing and fixing Marble stone flooring table rubbed, 15-18 mm thick over 20mm (Av.) thick base of CM 1:4 (1 cement : 4 coarse sand) jointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. OR Providing and fixing stone slabs table rubbed, 15-18 mm thick in Walls, Steps, Pillars, Counters, Jambs, Shelves, Sills etc. laid on 12mm (Av.) thick base of CM 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. MakranaAdanga .Above 3601 Cm2 Slabs
26	Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm confirmingto IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4).
27	ExtraforusingMarbleprinted/Graniteshadeordarkshadetilesinsteadofwhite,grey,ivory,fumeredbrown,lightgreen,lightblueandotherlightshadesinandMATfinishedtiles.
28	Extraforusing 400mm x 400mm MAT finishedtiles in place of 300mm x 300mm size.
29	Add extra for Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477 , using 5kg. adhesive per sqm of tile area, in average 3mmthickness instead of cement mortar.
30	P & F 1st qualityHeavy Duty Vitrified Polished Digital tiles on floor, skirting and steps etc.in different sizes (thickness minimum 10mm) with water absortion less than or equal 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1: 4 including grounting the joints with white cement and matching pigment etc complete.Size 600mm x 600mm
31	Providing and fixing Marble stone flooring table rubbed, 15-18 mm thick over 20mm (Av.) thick base of CM 1:4 (1 cement : 4 coarse sand) jointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. OR Providing and fixing stone slabs table rubbed, 15-18 mm thick in Walls, Steps, Pillars, Counters, Jambs, Shelves, Sills etc. laid on 12mm (Av.) thick base of CM 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. Keseriaji/ Abu Ambaji (Green Marble) Above 3601 Cm2 Slabs
32	Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. Jhunjhunu / Jalore (Red/Choclate/Black/Pink Colour)Above 3601 Cm2 Slabs
33	Extra for providing edge moulding to 15-18mm thick marble/ Granite/Kota stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Marble workFull Edge moulding
34	Extra for providing edge moulding to 15-18mm thick marble/ Granite/Kota stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite/Kota Stone WorkFull Edge moulding
35	Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in:Cement Mortar 1:6 ( 1-Cement : 6-Sand).
36	Supplying and fixing in walls machine cut and polished stone shelves, tands andin CM 1:3 with machine cut edges :Sand or other approved stone 50mm thick.
37	Supplying and fixing stone lintels/bed plates of approvedquarryroughdressedincement mortar 1:4 :Upto 15 cm. thick.