Bhopal Municipal Corporation has published Supply And Installation Of Chlorination Machinery With Booster Pump, Control Panel And Etc. Itemfor Ccr Kolar At Near Gurukullam Bawadiyan Kala Under Zone No.13- 1 Cabinet Mounted Vaccume Operated Gasfedder Mark Iv Chlorinator ( Cap 0-20 Kgs / Hr ) Ma. Submission Date for this Tender is 12-08-2022. Couplers Tenders in bhopal Madhya Pradesh. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 05-Aug-2022 | Corrigendum for Technical Reason | Date | 12-08-2022 |
Sl. No. | Item Description |
1 | Cabinet Mounted Vaccume Operated Gas Fedder Mark IV Chlorinator (cap 0-20 kgs/hr) Make:-Chloro Controls/Capco/Capital Contorl/Supreme Only |
2 | Remote type injector assembly Mark IV Chlorinator Chlorine Suiable for High Pressure line Make:-Chloro Controls/Capco/Capital Contorl |
3 | Chlorine gas filter cS-1 suitable for Arresting ferric chloride and other impurities carried out by chlorine gas also to trap the liquid drops internal Quartz made of s.s.316 test pressure to 40 bars. Make:-Chloro Controls/Capco/Capital Contorl |
4 | Booster Pump Set Suitable for Chlorinato (Multi Stage Pressure Boosting Type) Suitable to build pressure of 12-15kg after pressure loss at injector assebmbly 25 HP,3 Phase, 440 volts, 50 Hz IE-3 Motor Flow-30m3/hr,Head-113m min Make:-Shakti/Flowmore/Sintech/M&P/Kirloskar or Equivalent |
5 | Control Panel Starter for Pump set with short circuit Protection including ammeter and Volt Meter with VSS, On and Trip Indicator, Auto and Manual Selector Switch, Enclosedin Powder Coated Enclosure with PU Gasket for IP Protection Make:-BCH/L&T/Havells |
6 | Incomer Panel Enclouser with Aluminium Bus Bar suitable for 400 A Load, Ammeter, Voltmeter, RYB Indicator, made in 1.6 mm Sheet Steel. |
7 | MCCB 400A 3P 36kA Make:-BCH/L&T/Havells |
8 | MCCB 100A 3P 10kA Make:-BCH/L&T/Havells |
9 | Heavy Duty Capacitor Required for Booster Pump Motor Required kVAR-12.5kVAR Make:-BCH/L&T/Havells/Epcos/Madhav/ABB/Neptune |
10 | LT Power Cable, Aluminium Conductor XLPE Insulated, PVC Innersheated, Armoured, Extruded PVC Outersheadtehd, 1100 V Grade as per IS:7098-1988 (Part-1) with up to date amendments, Size:-50sq,mmx3.5core Make:-Havells/Polycab/Finolex |
11 | LT Power Cable, Copper Conductor, XLPE Insulated, PVC Innersheathed, Unarmoured, Extruded PVC Outersheadthed, 1100V Grade as per IS:7098-1988(part-1) with up to date amendments. Size:6sq.mmx3 core Make:-Havells/Polycab/Finolex |
12 | GI Hot Dip, Powder Coated, Perforaed Type Cable Tray Including Coupler Plates of suitable size and MS Suspenders including nuts, bolts etc. Size:-250mmx50mmx1.6mm |
13 | C.I/D.I Pipe line Including Socket, Bend Union,Valves etc. as required at site for interconecntion of Booster Pump Suction and Delivery Line |
14 | Container Auxiliary Isolating Valve confirming to IS:3224 Aluminum Silicon Bronze Body, silver plated and Monel Metal spindle with Teflon Gasket, clamp in one forged steel. |
15 | Tonner clamp for valve |
16 | Flexible coil connection Tube ,Annealed copper, PVC Sheathed, 5/16" NB, 18 SWG, Test pressure to 40 kgs/cm2 |
17 | Self contained Oxygen Breathing apparatu open circuit type fitted with full vision Face mask, warning whistle and demand valve cylinder mounted on a fiber glass back plate complete with carrying care for 45 mis. Duration as per IS:10245 part2 |
18 | Emergency Safety Kit for chlorine tonner (900Kg Capacity) To Stop Chlorine leakage from Tonner Valve or Body. Make:-Chloro Control/Capco/MG |
19 | Triple Spur Gear Chain Pully block 3 Ton Capacity x 3 Meters Height of lift Make:-Indef/Morris/Elephant/Globe/CMK |
20 | Chlorine Tonner Lifting tackle (Capacity 3 Ton) Made of Strong Steel Plates and specifically designed Hooks, Used to load and unload 900 Kg, Chlorine Tonner, Make:-Chloro Control/Capco/MG |
21 | Chlorine Pressure Gauge for Header Line |
22 | Tonner Key Make:-Chloro Control/Capital Control |
23 | Tonner Nut |
24 | Union Nut 5/16"NB |
25 | Compressor Ring |
26 | Lead washer |
27 | Supply and fixing of Chlorine Header Line made out of carbon steel sch 80, seamless liquid chlorine piping made as per ASTM 106 grade A&B. Along with carbon steel forged fitting of 300 LBS pressure rating, including isolating valve to IS : 3224 aluminium silicone bronze body and monel metal spindle with teflon gaskit. |
28 | Installation charge for chlorinator including grouting of filter, connecting flexible coil conection, vacuum line etc.as required at site with complete trail and testing at site complete job. |
29 | Installation Charge for Pump set and Control Panel Including Making foundation, Groutingm Electrical Connection etc, with Suction and Delivery Connection. |
30 | Earthing work using GI Plate of 600 mm x 600mm x 6 mm, G.I Earthing wire 12SWG Complete Hardware of earthing like Coal, salt, galvanized nut bolt, funnels, G.I Pipes etc. and main hole cover for earthing pit complete as per IE Rule with Earthing strips of required length size 25 mm x 5 mm for connection. |
31 | Installation of 12 Meters High Mast Lighting System Consist of 12.5 Meter High Mast pole with gear, pulley, winch, wire etc and 8 Nos. Flood Lights 150 Watts LED Light with suitable clamp, fitting and connections, with suitable concerete base at site. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail