|
| 1 | Dismantling floor hearth or wall tiling including cement mortar bedding but not backing and rubbish off the premises complete all as specified and as directed. |
| 2 | Material and labour for coloured non skid ceramic tile 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06sqm but not exceeding 0.11sqm, in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the surface, with and including 15mm thick screed bed in cement mortar 1:6 for laying floor tiles complete all as specified and as directed. |
| 3 | Material and labour for coloured ceramic glazed tiles of size 300x200x7mm thick in vertical surface of wall, such as dado, skirting etc over and including 10mm thick rendering in cement mortar 1:4 to receive glazed tiles set and jointed in white or coloured cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and as directed. |
| 4 | Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid in cement mortar and rubbish off the premises complete all as specified and as directed. |
| 5 | Material and labour for 20mm thick granite stone tiles (of any type) machine cut, bedded and jointed with grey cement slurry over and including 15mm thick screed bed in cement mortar in 1:6 , and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishingetc. complete all as specified and as directed. |
| 6 | Material and labour for rounding to edges of stone slabs on edge, such as in steps, cooking platform, and other similar situations etc. complete all as specified and as directed. |
| 7 | Taking down cement plaster of any description from stone/ brick or concrete surface of wall/ ceiling etc including racking out joints, hacking for key scrubbing down with water complete all as specified anddirected. |
| 8 | Material and labour for rendering 15mm thick plaster on fair faces of brick or concrete or stone masonry surfaces with cement mortar 1:6, finished even and smooth without using extra cement complete all as specified and directed. |
| 9 | Material and labour for rendering 15mm thick cement plaster in cement mortar 1:4 on external surface of brick work or concrete surfaces, finished even and smooth without using extra cement and mixed with water proofing compound @ 3% by weight of cement complete all as specified and directed. Note: Water proofing compound shall be measured and paid separately. |
| 10 | Material and labour for rendering 5mm thick plaster on concrete surfaces of ceiling with cement mortar 1:4,finished even and smooth without using extra cement complete all as specified and directed. |
| 11 | Material and labour for applying two coats of oil emulsion distemper paint over a coat of chalk whiting on wall preparatory to distember including preparation of old decorated plastered surfaces of wall and over 3mm thick wall care putty by complete removal of existing treatment complete all as specified and directed. |
| 12 | Material and labour for applying two coats of oil emulsion distemper paint over a coat of chalk whiting on wall preparatory to distember including preparation of new plastered surfaces or unplastered surface of wall over 3mm thick wall care putty on new surface of wall complete all as specified and directed. |
| 13 | Material and labour for applying three coat of white wash on new plastered surfaces of ceiling including preparation of surface complete all as specified and directed. |
| 14 | Material and labour for applying two coat of white wash on old decorated surfaces of ceiling including brooming, scrapping down with steel scrapper smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots etc complete all as specified and directed. |
| 15 | Material and labour for applying two coats of weather proof acrylic emulsion exterior paint over a coat of weather proof acrylic emulsion exterior primer including preparation of new surfaces of walls etc. complete all as specified and directed. |
| 16 | Material and labour for applying two coats of weather proof acrylic emulsion exterior paint over a coat of weather proof acrylic emulsion exterior primer including complete removal of existing treatment on old wall surfaces etc. complete all as specified and directed. |
| 17 | Supply and fix aluminium alloy wire cloth 0.45 mm nominal dia. of wire and average width of aperture of 1.40 mm and fixed with aluminium wire staples and fixed in repairs complete all as specified and directed. |
| 18 | Hacking out old broken glass (any thickness size quality or description) from wooden frame or stone concrete or brick surrounds glazed fixed with putty or fixed with beads etc complete all as specified and directed. |
| 19 | Fixing only in repair 600mm x 450mm beveled edge mirror mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers. Complete all as specified and directed. |
| 20 | Supply and fixing PTMT grating 140mm dia fixed in position complete all as specified and as directed. |
| 21 | Supply and fix PVC connections 15mm size with PTMT nuts, 600mm long fixed in repairs complete all as specified and as directed. |
| 22 | Taking down old steel tubing of 15mm bore pipe complete all as specified and as directed. |
| 23 | Taking down old steel tubing of 20mm bore pipe complete all as specified and as directed. |
| 24 | Supply and laying of CPVC water tubing outer dia 20mm, SDR-11 grade with plain CPVC SDR – 11 all fittings and fixed complete to walls and ceiling or laid in floor complete all as specified and as directed. |
| 25 | All as in item No 24 above but 25mm bore pipe |
| 26 | Supply and FixingBib tap cast copper alloy, fancy type CP with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferule and fixed of size 15mm bore fixed in repairs complete all as specified and directed. |
| 27 | Supply and Fixing Bib tap 15mm bore standard of PTMT any colour high pressure, long boby screwed for CPVC pipe (Minimum weight 15mm-120gms)fixed in repairs complete all as specified and directed. |
| 28 | Supply and Fixingpillar tap 15mm of PTMT long bodyfancy type screwed down, screwed for CPVC pipes 15mm bore (15mm-120gm) fixed in repairs complete all as specified and directed. |
| 29 | Supply and Fixing 15mm dia Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly-nuts, fency type screwed for iron pipe fixed in repairscomplete all as specified and as directed. |
| 30 | Supply and Fixing stop valves, cast copper alloy 15mm bore fancy type CP screwed down high pressure with crutch or butter fly handle for iron pipe or for unionfixed in repairs complete all as specified and directed. |
| 31 | Supply and Fixing Stop valve of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/ 20mm- 92gms) fixed in repairs complete all as specified and directed. |
| 32 | Supply and Fixing Angle stop valve 15mm of PTMT any colour high pressure screwed for CPVC pipe and fixed in repairs minimum weight (15mm - 90 gms) complete all as specified and directed. |
| 33 | Supply and Fixing PVC low level flushing cistern, 10 Ltrs capacity including float valve, chain, PVC flush pipe and connection to pipe complete all as specified and directed. |
| 34 | Supply and fix stainless steel shower roses 100mm size with or without swivel joint including fixing to steel pipe, fixed in repair complete all as specified and directed. |
| 35 | Supply and fix 500 liters capacity rotational moulded double layers polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part – I including disconnectingold water tank complete all as specified and as directed. |
| 36 | Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level) complete all as specified and as directed. |
| 37 | Material and labour cement concrete 1:3:6 (type C-2) using 40mm graded stone aggregate as in paving, plinth protection, 75mm thick, finished even and smooth without using extra cement complete all as specified and as directed. |
| 38 | Material and labour for one layer of concrete 20mm thick comprises composition 50Kg cement 3 to 6mm chips 100Kgsand 50 kg mixed with sprayset SL 3 TO 2.5 by weight of cement and 12.5 to 16.5 ltrs of water mixed with admixture incl bonding agent and applying rust remover and guniting with pressure nozzle with a delivery capacity of 2.5Kg/Sqm |
| 39 | Material and labour for rendering 10mm thick plaster on concrete surfaces with cement mortar 1:4,finished the surface even and smooth without using extra cement complete all as specified and directed. |
| 40 | Material and labour for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 41 | Material and labour for mild steel TMT bars 6mm to 8mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 42 | Supply only Integral Water proofing compound etc complete all as specified and directed. |
| 43 | Supply and fix 19mm dia stainless steel with bracket stops rollers etc fixed in repairs complete all as specified and directed. |
| 44 | Supply and fix brackets for securing curtain rod fixed in repairs complete all as specified and directed. |
| 45 | Supply and fix sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing with cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm with plugs, washers and waste coupling including PVC waste pipe complete all as specified and directed. |
| 46 | Taking down old PVC (SWR) pipes 75/110mm dia from walls complete all as specified and directed. |
| 47 | Supply and fixing 75mm bore PVC pipes single socketed, in any length with rubber ring joints, fixed to wall complete all as specified and as directed. |
| 48 | All as per tiem No 47 above but 110mm dia bore. |
| 49 | Supply and fixing UPVC (SWR) branch piece, single (single Y) equal or unequal with access door, for 75mm bore pipes complete all as specified and directed. |
| 50 | Supply and fixing UPVC (SWR) branch piece, double (double Y) equal or unequal with access door, for 75mm bore pipes complete all as specified and directed. |
| 51 | Supply and fixing UPVC (SWR) branch piece, single (single Y) equal or unequal with access door, for 110mm bore pipes complete all as specified and directed. |
| 52 | Supply and fixing UPVC (SWR) branch piece, double (double Y) equal or unequal with access door, for 110mm bore pipes complete all as specified and directed. |
| 53 | Supply and fixing vitreous china wash hand basin, white, flat back size 550 x 400 mm (excluding taps, waste, pipe, chain and plug) but incl porcelain stopper and a pair of MS bracket of suitable size etc fixed in repairs complete all as specified and directed. |
| 54 | Supply and fix vitreous china squatting pan \"Orissa\" pattern, of size 580mmx440mm white with integral foot rest with and including\"P\" or \"S\" trap, connection to trap and to flushing pipe, trap set in and including provision of lime concrete bedding and taking out old WC and connections fixed inrepairs etc complete all as specified and as directed. |
| 55 | Supply and fixing CPVC 32 mm dia as waste pipe fitted to basin or sink and flush tank to WC all as specified and directed including fixed in repairs. |
| 56 | Treating and finishing the sunken portion of WC area not exceeding 1.2 Sqm each by providing 10mm thick rendering in cm 1:3 with and including water proofing compound and applying two coats of bitumen, providing necessary connection items suitable for WC, providing lime concrete and 1mm thick multiplus plastifelt over 20mm thick plain cement concrete 1:2:4 type B0 using 12.5 mm graded crushed trap stone aggregate complete all as directed. |
| 57 | Supply and fix solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube supplying and fixing in opening as per specification and drawing complete all as specified and as directed. |
| 58 | Supply and fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement supplying and fixing in the frame at site as per specification and drawing complete all as specified and as directed. |
| 59 | Supply and fixing towel rail 600mm long of PTMT fixed with and including chromium plated brass screws and plastic cleats all as specified and as directed. |
| 60 | Supply and fix 100mm long butt hinges, extruded aluminium alloy with galvanized mild steel hinge pin anodized and fixed,type B-21 complete all as specified and directed. |
| 61 | Supply and fixing 100mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed. Supply and fix 100mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed. |
| 62 | Taking down chowkhats or frame with shutter (without taking off shutter from the frame) area not exceeding 1.5 Sqm each complete all as specified and as directed. |
| 63 | Taking down chowkhats or frame with shutter (without taking off shutter from the frame) area exceeding 1.5 Sqm but not exceeding 4 sqm each complete all as specified and as directed. |
| 64 | Supply and fix 2nd class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints etc complete all as specified and as directed. |
| 65 | Supply and fix 35mm thick, 2nd class hard wood, plain framed panelled shutter (any number of panels) with panels of timber flat on both sides or of veneered particle board medium density, wood partical board with commercialfaces veneers, size of the rail and stile as per IS: 1003 (Part-I), complete all as specified and as directed. |
| 66 | Supply and fix 35mm thick, 2nd class hard wood, glazed and skeleton door shutters, open rebated and prepared to receive glass or gauge etc divided into square with framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass or gauges etc sizes of members of shutters as specified in SSR Part-I Section 8 clause 8.24 (b) complete all as specified and as directed. |
| 67 | Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and as directed. |
| 68 | Supply and fix mild steel frame work such as grills gratings etc, with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, and similar work confirming to Fe 290, Gde E165 complete all as specified and as directed. |
| 69 | Supply and fix 140mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed. |
| 70 | Supply and fix mild steel work as in bands, straps, clamps, hold fast, etcand similar small articles conforming to Fe.290, Gde E-165 complete all as specified and directed. |
| 71 | Material and labour for PCC 1:2:4 type B-0 using 12.50mm graded crushed stone aggregates as in anchoring hold fast, bed plateand benching for manholes etc,complete all as specified and as directed. |
| 72 | Cutting holes in brick walls built in cement mortar for inserting hold fasts depth of embedded portion of hold fast exc half brick but n.exc one brick and making good the dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required. |
| 73 | Supply and fix 150mm long aluminium anodised, barrel tower bolts of extruded section, and fixed complete all as specified and as directed. |
| 74 | Supply and fix 125mm long butt hinges, extruded aluminium alloy with galvanized mild steel hinge pin anodized and fixed,type B-21 complete all as specified and directed. |
| 75 | Material and labour for applying two coats of synthetic enamelled paint over a coat of pink primer including preparation of new wooden surfaces of any description not otherwise described over 10cm width or girth complete all as specified and as directed. |
| 76 | Material and labour for applying one coat (finishing coat) of synthetic enamelled paint including preparation of old painted wooden surface of any description not otherwise described over 10cm width or girth complete all as specified and as directed. |
| 77 | Material and labour for applying two coats of synthetic enamelled paint over a coat of red oxide primer including preparation of new steel surfaces of any description not otherwise described over 10cm width or girth complete all as specified and as directed. |
| 78 | Material and labour for applying one coat (finishing coat) of synthetic enamel paint including preparation of old painted steel surfaces of any description not otherwise described over 10cm width or girth complete all as specified and as directed. |
| 79 | Supply and fix aluminum anodized powder coated sliding window frame and shutter having three track frame two carries glass shutter and one carries mosqueto net shutter, any type (sliding or open-able ) with frame , & ventilators, other similar work etc including necessary arrangement for sliding and locking & to receive 4mm thick sheet glass or wire mesh with aluminium channel beading & stainless steel screws including the cost of rubber gasket / rubber beading and all necessary fitting like mortice lock, aluminium tower bolt, handle, stopper, hinges etc complete . But the weight of the rubber gasket / beading will not be measured with weight of aluminium shutter complete all as specified and directed. Note :- (a)Sheet glass & wire mesh shall be measured &paid separately. (b)Weight of aluminium shall be measued exclusive of allfittings feature hinges, handle bolts and lockingarrangement. |
| 80 | Material and labour plain glass 4 mm thick,ordinary quality and glazingexc. 0.5 Sqm in each pane complete all as specified and as directed. |
| 81 | Material and labour for making good jambs, forming jambs etc to openings for door and window opening including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work complete in cement mortar 1:6 complete all as specified and as directed. |
| 82 | Cleaning and removing all scale and dirt, etc, from tanks from mouths of circulating pipes of tank exc 250 lits to 500 lits capacity complete all as specified and as directed. |
| 83 | Alll as per item No 82 above but capacity of tank exc 500 Lits to 1000 Litrs |
| 84 | Alll as per item No 82 above but capacity of tank exc 1000 Lits to 2000 Litrs |
| 85 | Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and as directed. |
| 86 | Supply and fixing for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 87 | Supply and fixing pre-painted galvalume aluminium zinc coating GI based plain sheet steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 88 | Supply and fix rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. confirming to quality \"A\", Fe-290 (Gde E- 165) complete all as specified and directed. |
| 89 | Supply and fixing compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc confirming to quality \"A\", Fe-290 (GdeE- 165) complete all as specified and directed. |
| 90 | Dismantling of ceiling boards of any description and at any position (fiber, pulp, insulation, etc.) or insulation boards/slabs/blankets any thickness, including cover fillets and grid frame work all as complete all as specified and directed. |
| 91 | Supply and fix anodized aluminium snap grid frame work for false ceiling of grid size 605mm x 605mm with size of main tee 35mm x 25mm x 1.5mm and cross tee 25mm x 25mm x 1.5mm and supporting angle at the end all along the wall 40mm x 25mm x 2mm, hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified directed. |
| 92 | Material and labour for 6mm thick non asbestos fibre cement building boards fixed or laid/ inserted to aluminium frame work with screws complete all as specified and directed.Note:- Aluminium frame work s considerd under item No 91 above. |
| 93 | Dismantling of old ceiling boarding of any description, fixed in any position with screw and re-fixed in flat or sloping6mm thickasbestos cement plain building boards fixed or laid/ inserted to timberframe or iron frame work with screws, hooks, belding, cliping etc complete all as specified and directed. |
| 94 | Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc. complete all as specified and directed by Engineer in charge. |
| 95 | Material and labour for for walling laterite of squared rubble, regular coursed, well bonded, bedded and solidly hearted built in cement mortar 1:6 complete all as specified and directed by Engineer in charge. |
| 96 | Extra over laterite stone walling (20mm) for hammer dressing to face stones and dressing of face beds and joints, as specified, of squared rubble masonary regular coursed complete all as specified and directed. |
| 97 | Dismantling / taking out existing hessain base felt or any other water proofing treatment from roof including cement plaster and exposing top surface of RCC slab. |
| 98 | Material & Labour for water proofing treatment using 3mm thick APP modified membrane consisting five layer membrane with features as spcified, weighing not less than 3kg per Sqm laid over a coat of cold applied bituminous primer @ 0.4 litres per sqm on surface to provide a layer of APP membrane by torching applications including sealing the over lap while torching with 150mm on ;length side and 100mm wide side as per manufacturer\"s instructions incl joints and change in direction be curved with cement mortar 1:3 mixed with SBR latex @ 200 ml/ bag of cement cured well before laying of membrane and provide a finishing coat with solar reflective bituminous aluminium paint @ 0.1 kg per Sqm as all as specified and directed. |
| 99 | Material and labour for priming coat and applying normal treatment using glass fiber bitumen felt grade 2 complete all as specified and as directed. |
