Military Engineer Services-MES has published Repair, Painting And Polishing Of Wooden / Steel Furniture And Charpoy Gi Pipe, Ip Steel Folding At Af Stn Barnala Under Ge ( Af ) Halwara. Submission Date for this Tender is 20-08-2022. GI Pipe Tenders in halwara Punjab. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 13-Aug-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 20-08-2022 |
Sl. No. | Item Description |
1 | CHAIR VERANDAH (FD-259) :- Removing the old cane from chair verandah (seat and back) and re-canning with new 4 mm wide white colour canecomplete all as specified and as directed by the Engineer-in-Charge. |
2 | M & L for painting frame of chair verandah with white synthetic enamel paint after preparation of surface as specified and directed by Engineer-in-Charge. |
3 | M & L for Gas welding to frame of chair verandah including preparation of surface and removing the unwanted welding spot all as directed by Engineer-in-Charge. |
4 | Supply and fixing in replacement of unserviceable portions of frame ofChair Verandahwith 20mmconduit pipe of wall thickness 1.6mm duly gas welding completeall as directed by Engr-in-Charge. |
5 | CHAIR DINNING WOODEN BOTTOM (FD-225/228) :- M & L for removing old unserviceable seat of chair wooden bottom and supply and fixing new seat made out of ply wood commercial 6 mm thick with perforated holes and size as per drg and as directed by Engr-in-Charge. |
6 | Supply and fixing in replacement of old unserviceable rear leg with new legs of 1st class hard wood to Chair dining wooden bottom made to shape and complete including polishing to match all as specified and shown in drg and as directed by the Engineer-in-Charge. |
7 | All as per Srl item No 2 .01 here in before but front leg |
8 | All as per Srl item No 2 .01 here in before but front rail, side rail, back rail |
9 | All as per Srl item No 2 .01 here in before but bottom stiffener |
10 | CHAIR DINNING CUSHIONED (FD-/E6/MAP/-II/04):Supply and fixing in replacement of unserviceable rear leg with new legs of 1st class hard wood to Chair dining cushioned made to shape and complete including polishing to match all as specified and shown in drg and as directed by the Engineer-in-Charge. |
11 | M & L for removing of existing faded off tapestry cloth and cushion of seat of chair dining cushioned and fixing of new seat and cushion 75 mm th , 32 density duly stiched with tapestry cloth of rate not less than Rs. 300/- per meter all as shown on drg and as directed by th Engineer - in- Charge. |
12 | CHAIR DINNING (FD-279 & FD/MAP/II/05) :Supply and fixing in replacement of rear leg with new legs of 1st class hard wood to Chair dining made to shape and complete including polishing to match all as specified and shown in drg and as directed by the Engineer-in-Charge. |
13 | All as per Srl item No 4 .00 here in before but front leg |
14 | All as per Srl item No 4 .00 here in before but front rail, side rail, back rail |
15 | All as per Srl item No 4 .00 here in before but bottom stiffener |
16 | All as per Srl item No 4 .00 here in before but back rest |
17 | All as per Srl item No 4.00 here in before but cane stiffeners rest |
18 | CHAIR DINNING JCO/ORS (FD/MAP-II/05) - :Removing old unsv /broken PVC seat and fixing with new seat made of 6 mm ply wood with cushion 75 mm thick ,32 density duly stiched with tapestry cloth of rate not less than Rs 250 /- per mtr the ply wood shall be fixed to wooden corner bracket of size (100 x 100 mm ) x 25 mm qty +04 Nos fixed on all inner corners of the seat all as directed by Engr in Charge . |
19 | All as per Srl item No 5 .00 here in before but rear leg |
20 | All as per Srl item No 5 .00 here in before but front leg |
21 | All as per Srl item No 5 .00 here in before but bottom/side /centre stiffner |
22 | CHAIR WRITING (FD-250, 280) :-Supply and fixing in replacement of rear leg with new legs of 1st class hard wood to chair writing made to shape and complete including polishing to match all as specified and shown in drg and as directed by the Engineer-in-Charge. |
23 | All as per Srl item No 6.00 here-in-before but front legs. |
24 | All as per Srl item No 6.00 here-in-before but arm rest. |
25 | All as per Srl item No 6.00 here-in-before but side, front & back rail rest. |
26 | All as per Srl item No 6.00 here-in-before but back rest. |
27 | All as per Srl item No 6.00 here-in-before but stiffner (Side & central one). |
28 | CHAIR EASY (FD-201&229) :- Supply and fixing in replacement of rear leg with new leg to chair easy of 1st class hard wood made to shape and size complete including polishing to match all as specified and shown in drg and as directed by the Engineer-in-Charge. |
29 | All as per Srl item No 7.00 here-in-before but front leg. |
30 | All as per Srl item No 7.00 here-in-before but front batten. |
31 | All as per Srl item No 7.00 here-in-before but back batten. |
32 | All as per Srl item No 7.00 here-in-before but arm rest. |
33 | All as per Srl item No 7.00 here-in-before but front & back rail of seat/back. |
34 | All as per Srl item No 7.00 here-in-before but side rail of seat/back. |
35 | CHAIR REVOLVING EXECUTIVE TYPE (TP) :-Supply and fixing in replacement of unserviceable seat of chair visitor with new seat 75mm thick foam 32 density with new tapestry cloth in dark colour duly stiched in pattern as approved and directed by Engineer-in-Charge. Cost of tapestry cloth not less than Rs. 380/- per meter. |
36 | All as per Srl item 8.00 here in before but back of chair revolving Execuive |
37 | Supply and stitching in replacement of old/worn out tapestry cloth seat& back of chair revolving executive with new tapestry cloth in dark colour not less than Rs 300/- per meter all as per sample and directed by Engineer-in-charge. |
38 | Supply and fixing in replacement of arms of chair revolving Executive all as per sample and as directed by Engr-in-charge. |
39 | M & L for removing of old unserviceable base of chair revolving Executive and supply and fixing of new base with all wheels all as directed by Engineer- in- Charge. |
40 | Supply and fixing of hydraulic system of chair revolving Executive all as directed by Engineer - in Charge. |
41 | Supply and fixing wheelsof chair revolving Executiveall as directed by Engineer - in Charge. |
42 | CHAIR REVOLVING /CHAIR COMPUTER (TP) :- Supply and fixing in replacement of unserviceable seat of chair visitor with new seat 75mm thick foam 32 density with new tapestry cloth in dark colour as approved and directed by Engineer-in-Charge. Cost of tapestry cloth not less than Rs. 280/- per meter. |
43 | All as per Srl item 9.00 here in before but back of chair revolving |
44 | Supply and stitching in replacement of old/worn out tapestry cloth of seat & back of chair revolving with new tapestry cloth in dark colour not less than Rs 300/- per meter all as per sample and directed by Engineer-in-charge. |
45 | Supply and fixing in replacement of arms of chair revolving all as per sample and as directed by Engr-in-charge. |
46 | M & L for removing of old unserviceable base of chair revolving and supply and fixing of new base with all wheels all as directed by Engineer- in- Charge. |
47 | Supply and fixing of hydraulic system of chair revolving all as directed by Engineer - in Charge. |
48 | Supply and fixing wheelsof chair revolving all as directed by Engineer - in Charge. |
49 | CHAIR VISITOR/CONFRENCE (TP) :-Supply and fixing in replacement of unserviceable seat & Back of chair revolving with new seat 75mm thick foam 32 density with new tapestry cloth in dark colour as approved and directed by Engineer-in-Charge. Cost of tapestry cloth not less than Rs. 280/- per meter. |
50 | All as per Srl item 10.00 here in before but back of chair visitor |
51 | Supply and stitching in replacement of old/worn out tapestry of chair visitor with new tapestry cloth in dark colour not less than Rs 280/- per meter all as per sample and directed by Engineer-in-charge. |
52 | Supply and fixing in replacement of arms of chair visitor all as per sample and as directed by Engr-in-charge. |
53 | M & L for Gas welding to frame of chair visitor including preparation of surface and removing the unwanted welding spot all as directed by Engineer-in-Charge. |
54 | M & L for painting to frame of chair visitor with black synthetic enamel paint including preparation of surface as specified and directed by Engineer-in-Charge. |
55 | CHAIR TUBULAR STEEL WITH ARMS (FD-75) :-Materail and labour for modification of seat of chair Tubular steel with arms by providing seat made of 75 mm thick cushion, 32 density duly covered with rexine of approved shade to be fixed over 6mm thick plywood commercial as per sample and as directed by Engineer-in-Charge. |
56 | All as per Srl item 11.00 here in before but back of chair tubular steel without arms |
57 | All as per Srl item 11.00 here in before but back of chair tubular steel with arm to be made out of 50 mm thick cushion of 32 density fixed on commercial ply 6 mm thick. |
58 | All as per Srl item 11.00 here in before but back of chair tubular steel with out arm to be made out of 50 mm thick cushion of 32 density fixed on commercial ply 6 mm thick. |
59 | M & L for Gas welding to frame of chair tubular steel including preparation of surface and removing the unwanted welding spot all as directed by Engineer-in-Charge. |
60 | M & L for painting to frame of chair tubular steel with/ with out Arms with black synthetic enamel paint including preparation of surface as specified and directed by Engineer-in-Charge. |
61 | CANNING:- Material and labour for re-canning of chairs or other articles of Chair dinning, hair easy, chair writting ,stool dressing binsolid linen etc with best quality plastic cane 2mm wide including removal of old cane complete all as specified and directed by Engineer-in-charge. |
62 | BED HARD WOODEN PLY TOP (FD-246) :-Supply and fixing of head board in replacement of old unserviceable head board of bed ply top all as specified and directed by Engineer-in-charge |
63 | Supply and fixing of foot board in replacement of old unserviceable foot board of bed plytop all as specified and directed by Engineer-in-charge |
64 | Supply and fixing of teak wood long rail 35x90mm in replacement of unserviceable long rail of bed ply top |
65 | Supply and fixing of teak wood short rails 60x60mm joining the long rails in replacement of old unserviceable short rails |
66 | Supply and fixing of teak wood stiffener 40x60mm joining long rails in replacement of unserviceable stiffener of bed ply top |
67 | Supply and fixing of 35x5 mm flat iron MS bent to right angle in replacement of old angles at the corner of bed plywood as directed by Engineer-in-charge |
68 | Material and labour for fixing of plywood 12mm thick commercial ply6"x3" in replacement of old unserviceable ply |
69 | BED HARD IP STEEL (FD/E6/Map-05):-Removing the existing unserviceable plywood top hard and S&F new 12mm Phenol commercial ply 6.5" x 3" on top fitted with screws of suitable size all as specified |
70 | Supply and fixing in replacemnt of new 18 mm thick prelaminated board with PVC edging6mm thick fixed with screws of suitable size. |
71 | Supply and fixing in replacemnt of 18 mm thick prelaminated particle board with PVCedging 6 mm thick suitable size of screws |
72 | M & L for replacemnet and welding ofjoints of iron components i.e 1.2 mm thick, 38mm square conduit pipe of Bed hard steel |
73 | TABLE DINNING 6/8 PERSONS (FD-273) :-Supply and fixing of new legs in replacement of old unserviceble leg all as per drawing. |
74 | Supply and fixing in replacemnt of long rails of table dining 6/8 pers |
75 | Supply and fixing in replacemnt of unserviceable short rails of tabled dining 6/8 pers |
76 | Supply and fixing in replacemnt of unserviceable top of table dining 6/8 pers |
77 | TABLE WRITING 3"x2" with /with out drawer (FD-275/249) -Supply and fixing of teak wood legs in replacement of old unserviceable legs of table writing |
78 | Supply and fixing of teak wood long rails in replacement of unserviceable long rails |
79 | Supply and fixing of teak wood shortnrails in repalcement of unserviceable short rails |
80 | Supply and fixing of teak wood bottom stiffeners in replacement of unserviceable bottom stiffeners |
81 | Supply and fixing of 18 mm thick Top of prelaminated particle board with PVCedging 6 mm thick |
82 | Supply and fixing in replacement of unserviceable box including drawers . The box shall be made of 12 mm thick ply board at the back which shall be 6mm thick commercial plywood |
83 | TABLE DRESSING LADIESWITH MIRROR (FD-E6/Map-II/07) :-Removing the existingdamage mirror and plywood back of table dressing Ladies and S&F new electro copper plated mirror of polished sheet glass of size 1200x 390 mm not less than 5.5 mm thick including fixing to existing wooden frame and replacing the damaged plywood with 8 mm thick BWR grade plywood complete all a specofied and directed. |
84 | Supply and fixing of drawers made out of 12mm thick plywood duly covered with teak veneered sunmica sheet 1mm thick from front. Side of the drawer shall be 12mm thick commercial plywood. The bottom and back of the drawer shall be 6mm thick commercial ply. |
85 | Removing the existing faded off tapstry cloth from cushion off dressing stool of table dressing ladies and provided new trapstry cloth of cost not less then Rs 200/- per meter of approved quality all as shown on drg and directed. |
86 | Supply and fixing in replacement of knob as per sampleapproved by GE |
87 | TABLE COMPUTER (FD/E6/MAP/03) :-Material and labour for removing of old unserviceable top of table computer and supply and fixing of new top made out of 18mm thick prelaminated MDF Board with PVC edging 6mm thick fixed with screws of suitable size all as directed by Engineer-in-Charge. |
88 | Supply and fixing in replacement of MS telescopic channels for drawers and sliding trays of table computer all as specified and directed by Engineer-in-Charge |
89 | SOFA SET (FIXED BACK) (FD-258) :-Material and labour for removing old cushion foam and tapestory cloth from seat and back of sofa set 3 seater and supply and fixing new foam cushion of 100mm thick 32 density (Make: featerfoam/sleepwell/kurlon) for back and 100 mm th 32 density for seat (consisting of 3 Blocks of size 21"x21"x4") and covered with new tapestory cloth not less than Rs300/ meter). All wooden work shall be french polished to attain glossy finish as directed by Engineer-in-charge. |
90 | All as per Srl item No 19.00herein before but sofa single chair of 5 seater set |
91 | Supply of new Foam cushion 32 density for seat and back of sofa set of size 22’’ x 21’’ x 4" thick duly stitched with new tapestry cloth not less than Rs 300/- meter as specified and directed by Engr-in-charge. Make of foam: Feather foam / Sleepwell / Kurlon. |
92 | TABLE CENTRE (FD-235/274) :-Material and labour for removing of old unserviceable leg of table centre and supply and fixing of new leg made of sheesham of size as shown on drg. |
93 | Material and labour for removing of old unserviceable stiffener of table centre and supply and fixing of new stiffener made of sheesham of size as shown on drg. |
94 | Material and labour for removing of old unserviceable rails (long/short) of table centre and supply and fixing of new rails made of sheesham of size as shown on drg. |
95 | Material and labour for removing of old unserviceable top of Table Centre and supply and fixing of new top made out of 18mm thick prelaminated Prelaminated Particle Board withTW edging 6mm thick all as directed by Engineer-in-Charge. |
96 | TABLE PEG (FD-236/277):-Material and labour for removing of old unserviceable leg of table peg and supply and fixing of new leg made of sheesham of size as shown on drg. |
97 | Material and labour for removing of old unserviceable stiffener of table peg and supply and fixing of new stiffener made of sheesham of size as shown on drg. |
98 | Material and labour for removing of old unserviceable rail of table peg and supply and fixing of new rail made of sheesham of size as shown on drg. |
99 | Material and labour for removing of old unserviceable top of Table Peg and supply and fixing of new top made out of 18mm thick prelaminated Prelaminated Particle Board withTW edging 6mm thick all as directed by Engineer-in-Charge. |
100 | TEA POY WOODEN (FD-232/278) :-Material and labour for removing of old unserviceable leg of teapoy wooden and supply and fixing of new leg made of sheesham of size as shown on drg. |
101 | Material and labour for removing of old unserviceable stiffener of teapoy wooden and supply and fixing of new stiffener made of sheesham of size as shown on drg. |
102 | Material and labour for removing of old unserviceable rail of teapoy wooden and supply and fixing of new rail made of sheesham of size as shown on drg. |
103 | Material and labour for removing of old unserviceable top of Teapoy wooden and supply and fixing of new top made out of 18mm thick prelaminated Prelaminated Particle Board withTW edging 6mm thick all as directed by Engineer-in-Charge. |
104 | TABLE OFFICE CLERK WOODEN WITH DRAWER -Supply and fixing of teak wood legs in replacement of old unserviceable legs of table office clk wooen with drawer |
105 | Supply and fixing of teak wood long rails in replacement of unserviceable long rails |
106 | Supply and fixing of teak wood short rails in repalcement of unserviceable short rails |
107 | Supply and fixing of teak wood bottom stiffeners in replacement of unserviceable bottom stiffeners |
108 | Supply and fixing of 18 mm thick Top of prelaminated particle board with PVCedging 6 mm thick |
109 | TABLE OFFICE OFFICER WOODEN WITH DRAWER -Supply and fixing of teak wood legs in replacement of old unserviceable legs of table office clk wooen with drawer |
110 | Supply and fixing of teak wood long rails in replacement of unserviceable long rails |
111 | Supply and fixing of teak wood short rails in repalcement of unserviceable short rails |
112 | Supply and fixing of teak wood bottom stiffeners in replacement of unserviceable bottom stiffeners |
113 | ALMIRAH LARGE STEEL WITH SHELVES (FD-1031) :- Removing of old unserviceable MS clamps and supply and fixing of new MS clamps with nut bolts or welding as per the drawing and as specified by Engineer-in-charge. |
114 | All as per Srl item No. 25.00 here-in-before but lock of 6 lever Make: Link/Godrej/Standard/Aligarh. |
115 | All as per Srl item No 25.00 here in before but CP handle 100mm with bolts |
116 | All as per Srl item No 25.00 here in before but 3 way Locking device with MS rods and cover box |
117 | All as per Srl item No 25.00 here-in-before but MS shelf made to shape out of 1mm thick MS sheet as shown on drawing. |
118 | All as per Srl item No 25.00 here-in-before but base channel of size 485 x 80 x 100 mm to be welded at 50mm from each end of length |
119 | All as per Srl item No 25.00 here in before but MS shutter made to shape as per the drg and as specified by the Engineer-in-charge |
120 | All as per Srl item No 25.00 here in before but MS Butt hinges 75mm |
121 | ALMIRAH MEDIUM STEEL WITH SLEVES (FD-234/1032) :- Removing of old unserviceable MS clamps and supply and fixing of new MS clamps with nut bolts or welding as per the drawing and as specified by Engineer-in-charge. |
122 | All as per Srl item No. 26.00 here-in-before but lock of 6 lever |
123 | All as per Srl item No 26.00 here in before but CP handle 100mm with bolts |
124 | All as per Srl item No 26.00 here in before but 3 way Locking device with MS rods and cover box |
125 | All as per Srl item No 26.00 here-in-before but MS shelf made to shape out of 1mm thick MS sheet as shown on drawing. |
126 | All as per Srl item No 26.00 here-in-before but base channel of size 485 x 80 x 100 mm to be welded at 50mm from each end of length |
127 | All as per Srl item No 26.00 here in before but MS shutter made to shape as per the drg and as specified by the Engineer-in-charge |
128 | All as per Srl item No 26.00 here in before but MS Butt hinges 75mm |
129 | LOCKER BED SIDE STEEL (FD-257/1029) :-Removing of old unserviceable Hasp and staple and supply and fixing of new CP Hasp and staple 75 mm long as approved by GE with nut bolts as per the drawing and as specified by Engineer-in-charge. |
130 | All as per Srl item No 27.00 here in before but Handle CP 100mm long with bolts |
131 | All as per srl item No 27.00 here in before but MS shelf made out of 1 mm thick sheet |
132 | All as per Srl item No 27.00 here in before but leg of size 600 x 80x 100mm made out of 1mm thick MS sheet |
133 | All as per Srl item No 27.00 in before but shutter made out of 1mm thick MS sheet |
134 | TABLE OFFICE OFFICERs STEEL (FD-1004) :-material and labour for removing damaged legs made of conduit/square pipe and replacing with new legs made out of MS conduit/square pipe of size 25mm dia and 1.6 mm wallthickness |
135 | All as per Srl item No 28.00 here in before but drawers made out of 1mm thick MS sheet with locks of 6 lever. The drawer shall run on telescopic channel for which new telescopic channel of appropriate size shall be supplied and fixed in the table |
136 | All as per Ser No 28.00 here in before but cabinet shutter made out of 1 mm thick MS sheet. The shutter shall be provided with groove duly covered with PVC to pull the shutter out. |
137 | Material and labour for removing unserviceable top ofclerk table and supply and fixing new top made of 19 mm thick Pre-laminated particle board of light shade as approved by GE with6mm TW Beading alround the edges. |
138 | Material and labour for welding to broken joints of frame of table |
139 | Supply & fixing of hard rubber shoe to the leg of table of standard approved quality all as specified and as directed by Engineer-in-charge. |
140 | All as per Srl item No.28.00 here in before but MS Butt hinges 75mm |
141 | TABLE OFFICE CLERKs STEEL (FD-1004) :- material and labour for removing damaged legs made of conduit/square pipe and replacing with new legs made out of MS conduit/square pipe of size 25mm dia and 1.6 mm wallthickness |
142 | All as per Srl item No 29.00 here in before but drawers made out of 1mm thick MS sheet with locks of 6 lever. The drawer shall run on telescopic channel for which new telescopic channel of appropriate size shall be supplied and fixed in the table |
143 | All as per Ser No 29.00 here in before but cabinet shutter made out of 1 mm thick MS sheet. The shutter shall be provided with groove duly covered with PVC to pull the shutter out. |
144 | Material and labour for removing unserviceable top ofclerk table and supply and fixing new top made of 19 mm thick Pre-laminated particle board of light shade as approved by GE with6mm TW Beading alround the edges. |
145 | Material and labour for welding to broken joints of frame of table |
146 | Supply & fixing of hard rubber shoe to the leg of table of standard approved quality all as specified and as directed by Engineer-in-charge. |
147 | All as per Srl item No.29.00 here in before but MS Butt hinges 75mm |
148 | Table Bed Side (FD-/E6/Map/15(R)S&F in repairs top of size 450x450mm made out of 18 mm thick Plywood with 1 mm sunmica fixed over it the beading 6 mm thick shall be fixed on all open edges. |
149 | S&F in repair side made out of 18 mm Plywood covered with 1 mm thick sunmica sheet and Ist Class hard wood 6 mm thick beading as per drawing complete all as specified . |
150 | Supply and fixing in replacement of MS telescopic channels for slidding drawers of table Bed sideall as specified and directed by Engineer-in-Charge |
151 | Material and labour for painting of undermentioned mentioned steel furniture as per the following steps:- (i) denting of bent surfaces with the help of hammer in best workmanship manner. (ii) removing old paint by scrubbing with sand paper 150 No thoroughly. (iii) applying one coat of metal primer Make: Asian/nerolaac/Dulux. (iv) Applying metal putty to even the surface. wait period of 2 - 3 hours to be given for putty to set and dry completely. scrub off the excess putty with 150 No sand paper and spraying little amount of water simultaneously. (v) wipe the surface with soft dry cloth and apply one coat of enamel paint of light shade as approved by GE and as specified by Engineer-in-charge. For Almirah Larze Steel (FD-1031) |
152 | All as per ser Item No.31.00but Almirah medium steel with shelves(FD-1032) |
153 | All as per ser Item No. 31.00but Locker Bed Side Steel(FD-1029) |
154 | All as per ser Item No. 31.00but Table Office Clk Steel (FD-1004) |
155 | All as per ser Item No. 31.00but Table Office officer Steel (FD-1004) |
156 | All as per ser Item No. 31.00but Bed IP Steel (FD/E6/MAP/08) |
157 | All as per ser Item No.31.00but Table bedside steel Portion (FD/E6/MAP/15) |
158 | All as per ser Item No.31.00 but Table computer Steel Portion(FD/E6/MAP/03) |
159 | Material and labour for polishing of undermentikoned mentioned wooden furnitures as per the following steps:-(i) Preparing the surface by sanding with sand paper of 120 - 220 grit along the grains to get smooth surface. (ii)wiping the wood with soft cloth to remove any dust and prepairing for staining. (iii) Applying the stain along the grains with the help of a brush/ clean rag. apply the stain evenlyand 2 - 3 times allowing the wood to dry in between each staining.(iv) Lightly sand down the wood surface with sand paper of 320 grit finally apply the laquer to get a smooth and glossy finish. ForChair Easy |
160 | All as per ser Item No.32.00but Chair writing(FD-280) |
161 | All as per ser Item No.32.00 but Table Peg(FD-236/277) |
162 | All as per ser Item No.32.00 but Teapoy wooden(FD-232/278) |
163 | All as per ser Item No.32.00 but Table writing(FD-249/275) |
164 | All as per ser Item No.32.00but Sofa set 5 seater(FD-258/281) |
165 | All as per ser Item No.32.00but Bed hard wooden(FD-246) |
166 | All as per ser Item No.32.00 but Table office clerk wooden (FD-289) |
167 | All as per ser Item No.32.00but Table office officer wooden (FD-136) |
168 | REPAIR TO CHARPOY GI PIPE (FD-220) :-Taking down unserviceable broken long rail of charpoy made out of GI Pipe 32mm bore medium grade and S&F new long rail of Gl pipe 32 mm bore, medium gradeincluding threading and fixing complete all as specified. |
169 | Taking down unserviceable broken short rail of charpoy GI pipe, making threading & fixing the short rail complete all as specified. Note:- Short rail shall be made from long rail obtaion from serial items No.33.00 above. |
170 | Taking down unserviceable broken leg of charpoy GI pipe making threading and fixing the leg. The bottom of legs shall be provided with GI cap of 32mm (Plug) complete all as specified. Note:- (leg shall be made from long/short rail obtained from serial items No .33.00 &33.01 above) |
171 | Taking out unserviceable elbow 3way 32mm bore of charpoy GI pipe and S & F new elbow 3 way 32mm medium weight complete all as specified. |
172 | Taking out unserviceable/ broken check nut of charpoy GI pipe and S & F new GI check nut 6mm thick suitable for charpoy GI Pipe 32mm bore complete alll as specified. |
173 | Welding in repairs with continuous running welding joints complete all round of GI pipe 32mm bore long/ short rail of legs welded in proper position all as specified and directed. |
174 | REPAIR TO CHARPOY PLY TOP :- M&L for retighting of all joints of Charpoy "S&F in replacement of plywood commercial 12mm thick of size 1980x900mm, grade BWR, type BB and fixed to frame of Charpoy GI pipe with 08 Nos GI nut bolt 6mm dia 62 to 65mm long with washer at both ends and nuts 02 Nos on each rail and square tube complete all as specified. |
175 | CHARPOY IP STEEL (FD/E6/MAP-II/01) :-M&L for Charpoy IP steel and "S&F in replacement of plywood commercial 12mm thick of size 1980x900mm, grade BWR, type BB and fixed to frame of Charpoy IP steel with 08 Nos GI nut bolt 6mm dia 62 to 65mm long with washer at both ends and nuts 02 Nos on each rail and square tube complete all as specified. |
176 | Charpoy Folding IP with Hard Top (FD-385) :- S & F in replacement of plywood commercial 9mm thick of size 990x830mmx02Nos, grade BWR, type BB and Fixed to frame of Charpoy IP Folding with 07 Nos GI nut, bolt 6mm dia 62 to 65mm long with washer at both ends and nuts 02 Nos on each rail and tube complete all as specified. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail