Constructing Building At Primary Health Centre Fungus Tal-Sangameshwar
Tender Value
93.86 Lakhs
Estimated cost
Bid Submission
15 Aug 2022
0 days left
EMD
94000
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
sangameshwar → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Constructing Building At Primary Health Centre Fungus Tal-Sangameshwar
BOQ
| Sl. No. | Item Description |
| 1 | Item No 1 :- Excavation for foundation in earth, soil of all types, sand gravel and soft murrum including removing the excavated material up to a distance50mbeyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation & necessasry back filling, ramming, watering including shoring and strutting etc. complete (Lift upto 1.5 m.)By Mechanical Means. Spec. no .: Bd .A.1 page no.. 259. |
| 2 | Item No. 2:-Excavation for foundation in Hard murum & bolders including removing the excavated material up to a distance 50M beyond the building area and stacking & spreading as directed, dewatering, preparing the bed for the foundation & necessasry back filling, ramming, watering including shoring and strutting etc.complete (Lift upto 1.5 m.) By Mechanical Means. Spec. no.:Bd .A3 page no.. 259. |
| 3 | Item No 3:-Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the top surface of plinth filling at the rate of 5 litres of emulsion concentrate at 0.5 percent ofclorophyrifosper square metre of surface area covering ten years guarantee on bond paper. (AS per Item no. 22.43 of schedule of rates of NBO ) Spec. No. :As directed by Engineer in charge. |
| 4 | Item No.4- Filling in plinth and floors withapprovedexcavated material in 15cm. to 20cm. layers including watering and compacting etc. complete. Spec. No. :Bd.A.10 page no.. 262. |
| 5 | Item No5 :-Filling in plinth and floors with contractorsmaterial/brought from outside and approved by Engineer inchargein layers of 15cm. to 20cm.including watering and compaction etc. complete.Spec. No. : Bd.A. 11/page no.. 263. |
| 6 | Item No 6:-Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete.Spec. No. :As directed by Engineer in charge. |
| 7 | Item No.7 :-Providing and laying cast in situ / Readymix, cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/ pumping, compacting roughening them if special finish is to be provided, finishing if required & curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer / concrete batch mix plant (Pan mixer) etc complete, With natural sand./ VSI quality artificial sand. Spec. No. :Bd. E. 1 page no.. |
| 8 | Ground Floor |
| 9 | First Floor |
| 10 | Item No.8:- Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite/quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footingsof R.C.C. columns and steel stanchions etc. columns as per detailed designs and drawing or as directedincluding Steel centering formwork, cover blocks laying/pumping, compaction finishing the formedsurfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface orroughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement andstructural steel). with fully automatic micro processor based PLC with SCADA enabled reversible DrumType mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSIGrade) |
| 11 | Item No. 9- Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite/quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steelcentering, formwork,cover blocks, laying/pumping, compaction finishing the formed surfaces with cementmortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if specialfinish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel). withfully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concreteBatch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 12 | Ground Floor |
| 13 | First Floor |
| 14 | Item No. 10-Providing & laying cast in situ / Readymix cement concrete M-30 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs & drawings or as directed including centering, formwork, cover blocks compaction & roughening the surface if special finish is to be provided & curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversable Drum type mixer / concrete batch mix plant (pan mixer) etc complete With natural sand / VSI quality artificial sand. Spec.No.:Bd.F.6 page no.. 300 and B.7, page no..38. |
| 15 | Ground Floor |
| 16 | First Floor |
| 17 | Item No 11:-Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering,formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 ofsufficient minimum thickness to give a smooth and even surface or roughening if special finish is tobe provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automaticmicro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant(Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 18 | Ground Floor |
| 19 | First Floor |
| 20 | Item No 12:Providing and laying cast in situ/ Readymixcement concrete M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design & drawings including centering, formwork, cover blocks, laying/ pumping,compacting , & roughening the surface if special finish is to be provided & curing complete. (Excluding reinforcement and structural steel).With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer concrete batch mix plant (Pan mixer) etc With natural sand / VSI quality artificial sand. Bd.F.9 page no.. 303 and B.7, page no..38. |
| 21 | First Floor |
| 22 | Item No 13:-Providing and fixing during laying in RCC Slabrectangular 2 mm thickM.S. sheet fan hook box ofsize 180x100 mm with required depth with holes or notches as required, bottom and top sides of 1.6 mm M.S. sheet fixed with 3.5 mm dia. round headed screws together with 12 mm dia. M.S. bar bent to shape with hooked ends for fan hook and painting to exposed surface. As directed by Engineer in charge. |
| 23 | First Floor |
| 24 | Item No 14:- Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks,laying/pumping, compacting and roughening them if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC withSCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete.With fine aggregate (Crushed sand VSI Grade) |
| 25 | First Floor |
| 26 | Item No.15:- Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas,lintels pardis,copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as requiredcomplete. Bd.F.17, page no.. 306. |
| 27 | Ground Floor |
| 28 | First Floor |
| 29 | Item No.16:- Providing Laterite stone masonary in cement mortar 1:6 in foundation and plinth including racking out joints when plastering is to be done/striking joints when no plastering is to be done watering and scaffolding. |
| 30 | Item No 17:- Providing Laterite stone masonary in cement mortar 1:6 in Superstructure including racking out joints when plastering is to be done/striking joints when no plastering is to be done watering and scaffolding. |
| 31 | First Floor |
| 32 | Item No 18:-Providing water proof bedding for flooring of Bath and WC 25 mm thick in C.M. 1:3 including using approved water proofing compound inspecified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee oncourt fee stamp paper of Rs.500/- including ponding test etc. complete. As directed by Engineer in charge. |
| 33 | First Floor |
| 34 | Item No 19:-Providing internal cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all position including scaffolding and curing etc. complete. Bd.L.2 page no.. 368. |
| 35 | First Floor |
| 36 | ItemNo 20:-Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. Bd.L.7 page no.. 369. |
| 37 | First Floor |
| 38 | Itemno 21:-Providing and laying Antiskid ceramic tiles ofapproved quality of size 30 cm x 30 cm and confirming to IS 15622-2006 (Group B IIIA)for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete. Bd.M.12 page no.. 385. |
| 39 | First Floor |
| 40 | Item No 22:-Providing and laying vitrified matt fininsh tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mmthickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern forflooring in required position laid on a bed of 1:4 cement morar including neat cement float, fillingjoints, curing and cleaning etc. complete. |
| 41 | First Floor |
| 42 | Item No 23:-Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary, curing,etc. complete. |
| 43 | First Floor |
| 44 | Item No24:-Providing and fixing fiber glass reinforced polyster door shutter 30 mm thick as per IS 14856 (2000) (Reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, etc complete. Spec. No. : As directed by Engineer in charge. SSR ITEM NO. 39.58 BDT & page no. 255 |
| 45 | First Floor |
| 46 | Item No 25:-Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. |
| 47 | First Floor |
| 48 | Item No26:-Providing and fixing in position (as per 1868 / 1982) Alluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 kg/Rmt. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 kg/Rmt.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. and handle and top section 40 x 18 x 1.25 mm at weight o.417 kg/Rmt. As per detailed drawings and as directed by Engineer-in-charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With colour Anodising with box. As directed by engineer-in-charge. |
| 49 | First Floor |
| 50 | Total Work Portion |
| 51 | Add for GST Charges 12% |
| 52 | Add For Quality Control Test |
| 53 | Add For Royalty Charges |
AI Tender Summary
Tender Timeline
Jul 21, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedAug 15, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 17, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender