Military Engineer Services-MES has published Repair / Maintenance Of Wooden And Steel Furniture Articles At Mcemeunder Under Ge Mceme Secunderabad- 1 M&L To Repairs Bed Plywood Topby Replacing The Following Unserviceable Parts With First Class Teakwood / Plywood Ostf.Rest All As Per Drawings And. Submission Date for this Tender is 25-08-2022. Coats and Jackets Tenders in secunderabad Telangana. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 02-Aug-2022 | POSTPONMENT | Date | 18-08-2022 |
| 2 | 12-Aug-2022 | REVISED BOQ | BOQ | 18-08-2022 |
| 3 | 12-Aug-2022 | AMENDMENT | Financial Bid | 18-08-2022 |
| 4 | 18-Aug-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 25-08-2022 |
| Sl. No. | Item Description |
| 1 | M&L to repairs Bed plywood topby replacing the following unserviceable parts with first class teakwood/ plywood OSTF.Rest all as per drawings and directed by Engr-in-charge.(DRG NO. FD-246/247/213) |
| 2 | Long leg. |
| 3 | Short leg. |
| 4 | Long rail. |
| 5 | Stiffener. |
| 6 | 3.5 thick teak face plywood, including half round teakwood beading if broken, ofboth side of head rest complete. |
| 7 | 3.5 thick teak face plywood, including half round teakwood beading if broken, ofboth side of foot rest complete. |
| 8 | Plywood 12mm thick(9 ply) BWR Gde of suitable size in single piece. |
| 9 | M&Lto repair Table Peg by replacing the following unserviceable parts with first class teakwood /prelaminated MDF Board (exterior gde).Rest all as per drawings and directed by Engr-in-charge. (DRG NO. FD-384/277/236) |
| 10 | Top made out of 18mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF-12) one side Classic walnut face and balancing white on other side with teakwood beading 4x18mm thick all around of suitable size fixed by panel pin and adhesive with diamond cut pattern finishing at corners . Rest all as per the drawings and directed by Engr-in-charge. |
| 11 | Leg made out of first class teakwood. |
| 12 | Front rail made out of first class teakwood. |
| 13 | Side rail made out of first class teakwood. |
| 14 | Bottom rail made out of first class teakwood. |
| 15 | S&F PVC shoe 15mm dia of approved quality. |
| 16 | M&L to repair Teapoyby replacing the following unserviceable parts with first class teakwood /prelaminated MDF Board (exterior gde). Rest all as per drawings and directed by engr-in-charge. (DRG NO. FD-382/278/232/34) |
| 17 | Top made out of 18mm thick pre-laminated exterior grade MDF board OSL (Designation PLMDF-12) one side Classic walnut face and balancing white on other side with teakwood beading 4x18mm thick all around of suitable size fixed by panel pin and adhesive with diamond cut pattern finishing at corners . Rest all as per the drawings and directed by Engr-in-charge. |
| 18 | Leg made out of first class teakwood. |
| 19 | Front rail made out of first class teakwood. |
| 20 | Side rail made out of first class teakwood. |
| 21 | Bottom rail made out of first class teakwood. |
| 22 | S&F PVC shoe 20mm dia of approved quality. |
| 23 | M&Lto repairTable Center by replacing the following unserviceable parts with first class teakwood /prelaminated MDF Board (exterior gde). Rest all as per drawings and directed by Engr-in-charge.(DRG NO. FD-134/235/ 274) |
| 24 | Top made out of 18mm thick pre-laminated exterior grade MDF board OSL (Designation PLMDF-12) one side Classic walnut face and balancing white on other side with teakwood beading 4x18mm thick all around of suitable size fixed by panel pin and adhesive with diamond cut pattern finishing at corners . Rest all as per the drawings and directed by Engr-in-charge. |
| 25 | Leg made out of first class teakwood. |
| 26 | Front rail made out of first class teakwood. |
| 27 | Side rail made out of first class teakwood. |
| 28 | Bottom rail made out of first class teakwood. |
| 29 | S&F PVC shoe 20mm dia of approved quality. |
| 30 | M&L to repair Table 900mm x600mm without drawerby replacing the following unserviceable parts with first class teakwood /prelaminated MDF Board (exterior gde).Rest all as per drawings and directed by Engr-in-charge. (DRG NO. FD-284/231/223/55/42(M)) |
| 31 | Top made out of 18mm thick pre-laminated exterior grade MDF board OSL (Designation PLMDF-12) one side Classic walnut face and balancing white on other side with teakwood beading 4x18mm thick all around of suitable size fixed by panel pin and adhesive with diamond cut pattern finishing at corners. Rest all as per the drawings and directed by Engr-in-charge. |
| 32 | Leg made out of first class teakwood. |
| 33 | Front/rear rail made out of first class teakwood. |
| 34 | Side rail made out of first class teakwood. |
| 35 | Stiffener made out of first class teakwood. |
| 36 | S&F PVC shoe 20mm dia of approved quality. |
| 37 | M&L to repair Table 900mm x600mmwith drawer by replacing the following unserviceable parts with first class teakwood /prelaminated MDF Board (exterior gde). Rest all as per drawings and directed by Engr-in-charge. (DRG NO. FD-283/224/41) |
| 38 | Top made out of 18mm thick pre-laminated exterior grade MDF board OSL (Designation PLMDF-12) one side Naina teak/Classic walnut face and balancing white on other side with teakwood beading 4x18mm thick all around of suitable size fixed by panel pin and adhesive with diamond cut pattern finishing at corners. Rest all as per the drawings and directed by Engr-in-charge. |
| 39 | Leg made out of first class teakwood. |
| 40 | Front/side rail made out of first class teakwood. |
| 41 | Stiffener made out of first class teakwood. |
| 42 | Back rail made out of first class teakwood. |
| 43 | Drawer complete excluding knob. |
| 44 | Front of drawermade out of 18mm thick prelaminated paticle board and 4mmx18mm teakwood beading complete excluding knob. |
| 45 | Bottom of drawer made out of plywood 6mm thick BWR Gde complete. |
| 46 | Side/back of drawermade out of 12 mm thick plywood BWR Gde complete. |
| 47 | S&F PVC shoe 20 mm dia of approved quality. |
| 48 | M&L to repair Table 900mm x900mmby replacing the following unserviceable parts with first class teakwood /prelaminated MDF Board (exterior gde). Rest all as per drawing and directed. (DRG NO. FD-291) |
| 49 | Top made out of 18mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF-12) one side Classic walnut face and balancing white on other side with teakwood beading 4x18mm thick all around of suitable size fixed by panel pin and adhesive with diamond cut pattern finishing at corners and polished with high gloss finish of lacquer polish. Rest all as per the drawing and directed by Engr-in-charge. |
| 50 | Leg made out of first class teakwood. |
| 51 | Rail made out of first class teakwood. |
| 52 | S&F PVC shoe 25mm dia of approved quality. |
| 53 | M&L to repair Hat stand with mirror by replacing the following parts with approved ones. Rest all as per drawings and directed by Engr-in-charge. (DRG NO. FD-233/361) |
| 54 | Plywood 3.5/4mm thick OSTF. |
| 55 | First class TW beading at all around of frame. |
| 56 | Mirror 5mm thick. |
| 57 | Brass peg 115-120mm long. |
| 58 | Aluminium nail hook 50mm long. |
| 59 | M&L to repair Table dining6 person by replacing the following unserviceable parts with teakwood /prelaminated MDF Board (exterior gde). Rest all as per drawings and directed by engr-in-charge. (DRG NO. FD-273/239/30(M)/FD/MAP-II/03/TP) |
| 60 | Top made out of 18mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF-12) one side Classic walnut face and balancing white on other side with teakwood beading 4x18mm thick all around of suitable size fixed by panel pin and adhesive with diamond cut pattern finishing at corners. Rest all as per the drawings and directed by Engr-in-charge. |
| 61 | Leg made out of first class teakwood. |
| 62 | Front rail made out of first class teakwood. |
| 63 | Side rail made out of first class teakwood. |
| 64 | Stiffener made out of first class teakwood. |
| 65 | S&F PVC shoe 25mm dia of approved quality. |
| 66 | M&Lto repair Table dining8 person by replacing the following unserviceable parts with first class teakwood /prelaminated MDF Board (exterior gde). Rest all as per drawings and directed by Engr-in-charge.(DRG NO. FD-273/239/30(M)/TP) |
| 67 | Top made out of 18/19mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF-12) one side Classic walnut face and balancing white on other side with teakwood beading 4x18mm thick all around of suitable size fixed by panel pin and adhesive with diamond cut pattern finishing at corners. Rest all as per the drawings and directed by Engr-in-charge. |
| 68 | Leg made out of first class teakwood. |
| 69 | Front rail made out of first class teakwood. |
| 70 | Side rail made out of first class teakwood. |
| 71 | Stiffener made out of first class teakwood. |
| 72 | S&F PVC shoe 25mm dia of approved quality. |
| 73 | M&L to repair Table dressing gents with mirror by replacing the following unserviceable parts withfirst class /teakwood/prelaminated MDF board (exterior gde)/plywood BWR gde.Rest all as per drawings and directed by Engr-in-charge. (DRG NO. FD-230/31(M)) |
| 74 | Top made out of 18mm thick pre-laminated MDF board exterior gde OSL (Designation PLMDF-12) one side Naina teak/Classic walnut face and balancing white on other side duly provided teakwood beading infront of suitable size. |
| 75 | All as per item no 11.01 but bottom complete. |
| 76 | All as per item no 11.01 but side complete. |
| 77 | Back ply of base made out of plywood 12mm thick( 9 ply) BWR gde complete. |
| 78 | Only Mirror 5mm thick of suitable size. |
| 79 | Back of mirror made out of plywood 6mm thick BWR Gde complete. |
| 80 | Drawer complete excluding knob. |
| 81 | Front of drawermade out of 18mm thick prelaminated MDF board andteakwood beading complete excluding knob. |
| 82 | Bottom of drawer made out of plywood 6mm thick BWR Gde complete. |
| 83 | Side/back of drawermade out of 12 mm thick (9ply) plywood BWR Gde complete. |
| 84 | M&L to repair Table dressing ladies with mirror by replacing the following unserviceable parts withfirst class teakwood/prelaminated MDF board (exterior gde)/plywood MR gde.Rest all as per drawings and directed by Engr-in-charge. (DRG NO. FD-251/32(M)/378) |
| 85 | Top made out of 18mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF-12) one side Naina teak/Classic walnut face and balancing white on other side duly provided teakwood beading infront. |
| 86 | All as per item no 12.01 but bottom complete. |
| 87 | All as per item no 12.01 but side complete. |
| 88 | Back ply of base made out of plywood 12mm thick (9ply) BWR gde complete. |
| 89 | Only Mirror 5mm thick of suitable size. |
| 90 | Back of mirror made out of 6mm thick BWR Gde plywood. |
| 91 | Plain glass 5 mm thick for sliding. |
| 92 | Aluminium channel complete of suitable size for sliding of glass. |
| 93 | Drawer complete excluding knob. |
| 94 | Front of drawermade out of 18mm thick prelaminated MDF board and 4mmx18mm teakwood beading complete excluding knob. |
| 95 | Bottom of drawer made out of plywood 6mm thick BWR Gde complete. |
| 96 | Side/back of drawermade out of 12 mm thick (9ply) plywood BWR Gde complete. |
| 97 | M&L to repair Side board by replacing the following items with teakwood /prelaminated MDF board (exterior gde) / plywood BWR Gde.Rest allas per drawings and directed by Engineer-in-Charge.(DRG NO. FD-241/371) |
| 98 | Top made out of 18mm thick pre-laminatedMDF board exterior gradeOSL (Designation PLMDF-12) one side Naina teak/Classic walnut face and balancing white on other side duly provided first class teakwood beading infront of suitable size. |
| 99 | All as per item No 13.01 but bottom complete. |
| 100 | All as per item No 13.01 but side complete. |
| 101 | All as per item No 13.01 but partition complete. |
| 102 | All as per item No 13.01 but single shutter duly provided teakwood beading on edges complete excluding knob. |
| 103 | All as per item No 13.01 but shelf 18mm thick complete. |
| 104 | Back ply 6mm thick BWR gde complete. |
| 105 | Legs with complete frame made out from first class teak wood. |
| 106 | Drawer complete excluding knob. |
| 107 | Front of drawer made out of 18mm thick prelaminated MDF board and 4mm x 18mm teakwood beading excluding knob. |
| 108 | Bottom of drawer made out of plywood 6mm thick BWR Gde complete. |
| 109 | Side/back of drawer made out of 12mm thick (9 ply) plywood BWR gde complete. |
| 110 | M&L to repair Bin linen multipurpose by replacing the following items with teakwood /prelaminated MDF board (exterior gde)/ plywood BWR gde. Rest allas per drawings anddirected by Engr-in-charge. (DRG NO. FD/E6/MAP/09) |
| 111 | Top made out of 18mm thick pre-laminatedMDF board exterior gradeOSL (Designation PLMDF-12) one side Naina teak/Classic walnut face and balancing white on other side duly provided first class teakwood beading infront of suitable size. |
| 112 | All as per item No 14.01 but bottom complete. |
| 113 | All as per item No 14.01 but side complete. |
| 114 | All as per item No 14.01 but partition complete. |
| 115 | All as per item No 14.01 but single shutter (left) duly provided teakwood beading on edges complete excluding handle. |
| 116 | All as per item No 14.01 but single shutter (right) duly provided teakwood beading on edges complete excluding handle. |
| 117 | All as per item No 14.01 but shelf (left) complete. |
| 118 | All as per item No 14.01 but shelf (right) complete. |
| 119 | Back ply 12mm thick (9 ply) BWR gde. |
| 120 | Legs with complete frame made out from first class teak wood. |
| 121 | Drawer complete excluding handle. |
| 122 | Front of drawer made out of 18mm thick prelaminated MDF board and teakwood beading of suitable size excluding handle. |
| 123 | Bottom of drawer made out of 18mm thick prelaminated MDF board complete. |
| 124 | Side/back of drawer made out of 18mm thick prelaminated MDF board and PVCbeading of suitable size. |
| 125 | CP handle 100mm long of approved quality. |
| 126 | M&L to repairTable writingby replacing the following unserviceable parts withfirst class teakwood/prelaminated MDF board (exterior gde)/plywood BWR gde.Rest all as per drawings and directed.(DRG NO. FD-275/249/33(M)) |
| 127 | Top made out of 18mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF-12) one side Naina teak/Classic walnut face and balancing white on other side with teakwood beading 4x18mm thick all around of suitable size fixed by panel pins and adhesive with diamond cut pattern finishing at corners. Rest all as per the drawings and directed by Engr-in-charge. |
| 128 | Leg made out of first class teakwood complete. |
| 129 | All as per item no 15.02 butfront railcomplete. |
| 130 | All as per item no 15.02 but side railcomplete. |
| 131 | All as per item no 15.02 but side stiffener complete. |
| 132 | All as per item no 15.02 but center stiffener complete. |
| 133 | All as per item no 15.01 but side of cabinet complete. |
| 134 | All as per item no 15.01 but bottom of cabinetcomplete. |
| 135 | All as per item no 15.01 butshutter of cabinetcomplete. |
| 136 | Back of cabinet made out of plywood 6mm thick BWR gde. |
| 137 | Shelf of cabinet made out ofplywood 12 mm thick BWR gde complete. |
| 138 | Drawer complete excluding knob. |
| 139 | Front ofdrawermade out of 18mm thick prelaminated MDF board and 4mmx18mm teakwood beading complete excluding knob. |
| 140 | Bottom of drawer made out of plywood 6mm thick BWR Gde complete. |
| 141 | Side/back of drawermade out of 12 mm thick (9ply) plywood BWR Gde complete. |
| 142 | Brass lock of suitable size with duplicate key complete. |
| 143 | M&L to repair Sofa set 5/4 seater by replacing the following unserviceable parts with first class teakwood.Rest allas per drawings anddirected by Engr-in-charge.(DRG NO. FD-281/373/ FD/MAP-II/02) |
| 144 | Leg. |
| 145 | Arm. |
| 146 | Side rail. |
| 147 | Batton seat/back. |
| 148 | Front rail of single seater. |
| 149 | Front rail of three seater. |
| 150 | Back rest rail top/side of single seater. |
| 151 | Back rest rail side of three seater. |
| 152 | Back rest rail top of three seater. |
| 153 | Removing old foam cushion with tapestry cloth and S&F new P.U.Foam cushion of size 530mmx560mmx100mm (40 density) duly covered with approved quality of tapestry cloth.Make of foam cushion:- sleepwell (Feather Foam) / Kurl-on(Komfort universe goldline plus) / Corfom (Premium Foam) . Note:- Cost of tapestry cloth shall be between Rs 200/- to Rs 250/- per mtr. |
| 154 | Removing worn out tapestry cloth from old cushion and replacing the same with new tapestry cloth of approved quality.Note:- cost of tapestry cloth shall shall be between Rs 200/- to Rs 250/- per mtr. |
| 155 | M&L to repair Table bed side by replacing the following items with teakwood /prelaminated MDF board (exterior gde)/ plywood BWR Gde.Rest allas per drawings and directed by Engineer-in-Charge. (DRG NO. FD-276/248/210) |
| 156 | Top made out of 18mm thick pre-laminatedMDF board exterior gradeOSL (Designation PLMDF-12) one side Naina teak/Classic walnut face and balancing white on other side duly provided first class teakwood beading infront of suitable size. |
| 157 | All as per item No 17.01 but bottom complete. |
| 158 | All as per item No 17.01 but side complete. |
| 159 | Back ply 6mm thick BWR gde complete. |
| 160 | M&L to repair Book Case wooden by replacing the following items with teakwood /prelaminated MDF board (exterior gde)/ plywood BWR Gde.Rest allas per drawings and directed by Engineer-in-Charge.(DRG NO. FD-237) |
| 161 | Top made out of 18mm thick pre-laminatedMDF board exterior gradeOSL (Designation PLMDF-12) one side Naina teak/Classic walnut face and balancing white on other side duly provided first class teakwood beading infront of suitable size. |
| 162 | All as per item No 18.01 but bottom complete. |
| 163 | All as per item No 18.01 but side complete. |
| 164 | All as per item No 18.01 but shelf (Right) complete. |
| 165 | All as per item No 18.01 butshutter complete |
| 166 | Back ply 6mm thick BWR gde complete. |
| 167 | Legs with complete frame made out from first class teak wood. |
| 168 | Brass lock of suitable size with duplicate key complete. |
| 169 | Taking out carefully old existing Knob from side board, table dressing gents, table dressing ladies etc and S&F new decorative Knob 32mm dia of approved quality. Rest all as directed by Eng-in-charge. |
| 170 | Taking out u/s Bearer of suitable Size from different type of tables likes side board, table writing, table 900 x 600mm with drawer etc and S&F new Bearer of suitable size, made out of first class teakwood complete. Rest all as directed by Eng-in-charge. |
| 171 | M&L to repairs Chair dining by replacing the following unserviceable parts with first class teak wood/approved ones. Rest all as per drawing & as directed.(DRG NO. FD-1105/279/270/262/228/203) |
| 172 | Front leg. |
| 173 | Rear leg. |
| 174 | Stiffener. |
| 175 | Back rest. |
| 176 | Rail. |
| 177 | S&F PVC shoe 15mm dia of approved quality. |
| 178 | M&L torepairChair dining by replacing old plastic cane with new cane of2 to 2.5 mm width and 0.4mmthick of approved quality.Border of chair shall be caned with 4mm wide and 0.6mm thick cane. |
| 179 | M&L torepair Chair dining cushioned MAP by replacing the following unserviceable parts with first class teakwood/approved ones. Rest all asas per drawings and as directed.(Drg No FD/MAP-II/04,FD /E6/MAP/10(R)) |
| 180 | Front leg. |
| 181 | Rear leg. |
| 182 | Rail. |
| 183 | Stiffener. |
| 184 | Vertical strip. |
| 185 | Only tapestry cloth of seat complete. Note:- Cost of tapestry cloth shallbe between Rs 200/- to Rs 250/- per mtr. |
| 186 | Tapestry cloth and foam 75mm (40 D) of seat complete. Note:- Cost of tapestry cloth shallbe between Rs 200/- to Rs 250/- per mtr. |
| 187 | Only Plywood 12mm thick (9 ply) BWR gde. |
| 188 | S&F PVC shoe 15mm dia of approved quality. |
| 189 | M&L to repair Chair dining high back by replacing old worn out tapestry cloth of seat & back with approved quality of rexine cloth & old raw meterals like hessian cloth,coir,springs & cotton niwar if reqd incl necessary repairs to the chair.Rest all as directed by engr-in-charge (Drg No-TP) Note:- Cost of rexine cloth shallbe between Rs 250/- to Rs 300/- per mtr |
| 190 | M&L to repair Chair dining high back by Removing old foam cushion and S&F new P.U.Foam cushion 50mm (40 D) of seat complete.Rest all as directed by engr-in-charge (Drg No-TP) |
| 191 | M&L to repair Chair easy cushionedby replacing the following unserviceable parts with first class teakwood/approved ones.Rest all as per drawing and as directed by engr-in-charge.(DRG NO. FD-358,TP) |
| 192 | Leg. |
| 193 | Arm |
| 194 | Front rail |
| 195 | Side rail |
| 196 | Side rail back |
| 197 | Back support |
| 198 | Rexine cloth of seat & back complete. Note:- Cost of rexine cloth shallbe between Rs 250/- to Rs 300/- per mtr |
| 199 | Rexine cloth of both arms complete. Note:- Cost of rexine cloth shallbe between Rs 250/- to Rs 300/- per mtr |
| 200 | Foam cushion 75mm (40 D) of seat complete. |
| 201 | Foam cushion 50mm (40 D) of back complete. |
| 202 | Only Plywood 12mm thick (9 ply) BWR gde of seat complete. |
| 203 | Only Plywood 4mm thick (9 ply) BWR gde of back complete. |
| 204 | M&L to repair Chair easy by replacing the following unserviceable parts with first class teakwood.Rest all as per drawing and as directed by engr-in-charge. (DRG NO. FD-229/201) |
| 205 | Leg. |
| 206 | Frame front/back of seat |
| 207 | Frame side of seat. |
| 208 | Frame top/bottom of back. |
| 209 | Frame side of back. |
| 210 | Arm. |
| 211 | Rail. |
| 212 | S&F PVC shoe 15mm dia of approved quality. |
| 213 | M&L torepairChair easy by replacing old plastic cane with new cane of2 to 2.5 mm width and 0.4mmthick of approved quality.Border of chair shall be caned with 4mm wide and 0.6mm thick cane. |
| 214 | M&L torepairChair writing by replacing the following unserviceable parts with first class teak wood. Rest all as per drawing & as directed by engr-in-charge.(DRG NO. FD-280/250) |
| 215 | Front leg. |
| 216 | Rear leg. |
| 217 | Arm. |
| 218 | Stiffener. |
| 219 | Back rest. |
| 220 | Rail. |
| 221 | S&F PVC shoe 15mm dia of approved quality. |
| 222 | M&L torepairChair writing by replacing old plastic cane with new cane of2 to 2.5 mm width and 0.4mmthick of approved quality.Border of chair shall be caned with 4mm wide and 0.6mm thick cane. |
| 223 | M&L torepairStool dressing cushion by replacing the following parts with first class teakwood/approved ones.Rest all as per drawing and as directed by Engineer-in-Charge. (DRG NO. FD-252/282/FD/E6/MAP/14) |
| 224 | Leg. |
| 225 | Rail. |
| 226 | Only tapestry cloth of seat complete. Note:- Cost of tapestry cloth shallbe between Rs 200/- to Rs 250/- per mtr. |
| 227 | Tapestry cloth and Cushion75mm(40D) complete. Note:- Cost of tapestry cloth shallbe between Rs 200/- to Rs 250/- per mtr. |
| 228 | Plywood 12mm thick (9ply) BWR Gde. |
| 229 | Stiffener. |
| 230 | S&F PVC shoe 15mm dia of approved quality. |
| 231 | M&L torepairChair writing by replacing old plastic cane with new cane of2 to 2.5 mm width and 0.4mmthick of approved quality.Border of chair shall be caned with 4mm wide and 0.6mm thick cane. |
| 232 | M & L for preparation of old wooden polished surface of Bed Hard (FD-246/247/213) by rubbing down the old polish from wooden surface with sand paper,removing pluck mark with wooden scraper,cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, fevicol, water and colour) and adding colour (RawSienna/Brunt Sienna/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achived, wiping off the polish from other than wooden surfaces with polish thinner and applying lacquer polish till glossy finish is achieved complete all as specified and directed. |
| 233 | M & L for preparation of old wooden polished surface of Table Peg (FD-384/277/236) by rubbing down the old polish from wooden surface with sand paper,removing pluck mark with wooden scraper,cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, fevicol, water and colour) and adding colour (Raw Sienna/Brunt Sienna/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achived, wiping off the polish from other than wooden surfaces with polish thinner and applying lacquer polish till glossy finish is achieved complete all as specified and directed. |
| 234 | M & L for preparation of old wooden polished surface of Teapoy (FD-382/278/232/34) by rubbing down the old polish from wooden surface with sand paper,removing pluck mark with wooden scraper,cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, fevicol, water and colour) and adding colour (RawSienna/Brunt Sienna/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achived, wiping off the polish from other than wooden surfaces with polish thinner and applying lacquer polish till glossy finish is achieved complete all as specified and directed. |
| 235 | M & L for preparation of old wooden polished surface of Table Center (FD-134/235/274)by rubbing down the old polish from wooden surface with sand paper,removing pluck mark with wooden scraper,cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, fevicol, water and colour) and adding colour (Raw sienna/Brunt Sienna/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achived, wiping off the polish from other than wooden surfaces with polish thinner and applying lacquer polish till glossy finish is achieved complete all as specified and directed. |
| 236 | M & L for preparation of old wooden polished surface of Table 900X600mm without drawer (FD-284/231/223/55/42(M)) by rubbing down the old polish from wooden surface with sand paper,removing pluck mark with wooden scraper,cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, fevicol, water and colour) and adding colour (Raw Sienna/Brunt Sienna/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achived, wiping off the polish from other than wooden surfaces with polish thinner and applying lacquer polish till glossy finish is achieved complete all as specified and directed. |
| 237 | M & L for preparation of old wooden polished surface of Table 900X600mm with drawer(FD-283/224/41) by rubbing down the old polish from wooden surface with sand paper,removing pluck mark with wooden scraper,cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, fevicol, water and colour) and adding colour (Raw Sienna/Brunt Sienna/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achived, wiping off the polish from other than wooden surfaces with polish thinner and applying lacquer polish till glossy finish is achieved complete all as specified and directed. |
| 238 | M & L for preparation of old wooden polished surface of Table 900X900mmFD-291 by rubbing down the old polish from wooden surface with sand paper,removing pluck mark with wooden scraper,cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, fevicol, water and colour) and adding colour (Raw Sienna/Brunt Sienna/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achived, wiping off the polish from other than wooden surfaces with polish thinner and applying lacquer polish till glossy finish is achieved complete all as specified and directed. |
| 239 | M & L for preparation of old wooden polished surface of Table dining 6 pers(FD-273/239/30(M)/FD/MAP-II/03) by rubbing down the old polish from wooden surface with sand paper,removing pluck mark with wooden scraper,cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, fevicol, water and colour) and adding colour (Raw Sienna/Brunt Sienna/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achived, wiping off the polish from other than wooden surfaces with polish thinner and applying lacquer polish till glossy finish is achieved complete all as specified and directed. |
| 240 | M & L for preparation of old wooden polished surface of Table dining 8 persFD-273/239/30(M) by rubbing down the old polish from wooden surface with sand paper,removing pluck mark with wooden scraper,cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, fevicol, water and colour) and adding colour (Raw Sienna/Brunt Sienna/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achived, wiping off the polish from other than wooden surfaces with polish thinner and applying lacquer polish till glossy finish is achieved complete all as specified and directed. |
| 241 | M & L for preparation of old wooden polished surface of Hat stand with mirror (FD-233/361) by rubbing down the old polish from wooden surface with sand paper,removing pluck mark with wooden scraper,cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, fevicol, water and colour) and adding colour (Raw Sienna/Brunt Sienna/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achived, wiping off the polish from other than wooden surfaces with polish thinner and applying lacquer polish till glossy finish is achieved complete all as specified and directed. |
| 242 | M & L for preparation of old wooden polished surface of Table dressing gents with mirror (FD-230/31(M)) by rubbing down the old polish from wooden surface with sand paper,removing pluck mark with wooden scraper,cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, fevicol, water and colour) and adding colour (Raw sienna/Brunt Sienna/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achived, wiping off the polish from other than wooden surfaces with polish thinner and applying lacquer polish till glossy finish is achieved complete all as specified and directed. |
| 243 | M & L for preparation of old wooden polished surface of Table dressing ladieswith mirror (FD-251/32(M)/378) by rubbing down the old polish from wooden surface with sand paper,removing pluck mark with wooden scraper,cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, fevicol, water and colour) and adding colour (Raw Sienna/Brunt Sienna/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achived, wiping off the polish from other than wooden surfaces with polish thinner and applying lacquer polish till glossy finish is achieved complete all as specified and directed. |
| 244 | M & L for preparation of old wooden polished surface ofSide Board(FD-241/371) by rubbing down the old polish from wooden surface with sand paper,removing pluck mark with wooden scraper,cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, fevicol, water and colour) and adding colour (Raw Sienna/Brunt Sienna/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achived, wiping off the polish from other than wooden surfaces with polish thinner and applying lacquer polish till glossy finish is achieved complete all as specified and directed. |
| 245 | M & L for preparation of old wooden polished surface of Bin linen multipurpose(FD-FD/E6/MAP/09) by rubbing down the old polish from wooden surface with sand paper,removing pluck mark with wooden scraper,cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, fevicol, water and colour) and adding colour (Raw Sienna/Brunt Sienna/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achived, wiping off the polish from other than wooden surfaces with polish thinner and applying lacquer polish till glossy finish is achieved complete all as specified and directed. |
| 246 | M & L for preparation of old wooden polished surface of Table writing(FD-275/249/33(M)) by rubbing down the old polish from wooden surface with sand paper,removing pluck mark with wooden scraper,cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, fevicol, water and colour) and adding colour (Raw Sienna/Brunt Sienna/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achived, wiping off the polish from other than wooden surfaces with polish thinner and applying lacquer polish till glossy finish is achieved complete all as specified and directed. |
| 247 | M & L for preparation of old wooden polished surface ofSofa set 5 seater(FD-281/373/FD/MAP-II/02) by rubbing down the old polish from wooden surface with sand paper,removing pluck mark with wooden scraper,cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, fevicol, water and colour) and adding colour (Raw sienna/Brunt Sienna/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achived, wiping off the polish from other than wooden surfaces with polish thinner and applying lacquer polish till glossy finish is achieved complete all as specified and directed. |
| 248 | M & L for preparation of old wooden polished surface ofSofa set 4 seater(FD-281/373/FD/MAP-II/02) by rubbing down the old polish from wooden surface with sand paper,removing pluck mark with wooden scraper,cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, fevicol, water and colour) and adding colour (Raw Sienna/Brunt Sienna/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achived, wiping off the polish from other than wooden surfaces with polish thinner and applying lacquer polish till glossy finish is achieved complete all as specified and directed. |
| 249 | M & L for preparation of old wooden polished surface of Table Bed Side(FD-276/248/210) by rubbing down the old polish from wooden surface with sand paper,removing pluck mark with wooden scraper,cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, fevicol, water and colour) and adding colour (Raw Sienna/Brunt Sienna/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achived, wiping off the polish from other than wooden surfaces with polish thinner and applying lacquer polish till glossy finish is achieved complete all as specified and directed. |
| 250 | M & L for preparation of old wooden polished surface of Book case wooden (FD-237) by rubbing down the old polish from wooden surface with sand paper,removing pluck mark with wooden scraper,cleaning of dirt and stopping holes by filling putty (Mixture of fine saw dust, fevicol, water and colour) and adding colour (Raw Sienna/Brunt Sienna/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achived, wiping off the polish from other than wooden surfaces with polish thinner and applying lacquer polish till glossy finish is achieved complete all as specified and directed. |
| 251 | M&L for preparation of old wooden polished surface ofChair dining (FD-279/270/262/228/203) by rubbing down the old polish from the wooden surface with sand paper, removing pluck mark with wooden scraper cleaning of dirtand stopping holes by filling putty (Mixture of fine saw dust, Fevicol, water and colour) and adding colour (Raw seina/Burnt Seina/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying lacquer polish till high gloss finish is achieved complete all as specified and directed. |
| 252 | M&L for preparation of old wooden polished surface ofChair dining cushioned MAP (FD/E6/MAP/10(R)/FD/MAP-II/04) by rubbing down the old polish from the wooden surface with sand paper, removing pluck mark with wooden scraper, cleaning of dirtand stopping holes by filling putty (Mixture of fine saw dust, Fevicol, water and colour) and adding colour (Raw seina/Burnt Seina/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying lacquer polish till high gloss finish is achieved complete all as specified and directed. |
| 253 | M&L for preparation of old wooden polished surface ofChair dining high back (TP) by rubbing down the old polish from the wooden surface with sand paper, removing pluck mark with wooden scraper, cleaning of dirtand stopping holes by filling putty (Mixture of fine saw dust, Fevicol, water and colour) and adding colour (Raw seina/Burnt Seina/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying lacquer polish till high gloss finish is achieved complete all as specified and directed. |
| 254 | M&L for preparation of old wooden polished surface ofChair Easy cushioned (FD-358,TP)by rubbing down the old polish from the wooden surface with sand paper, removing pluck mark with wooden scraper, cleaning of dirtand stopping holes by filling putty (Mixture of fine saw dust, Fevicol, water and colour) and adding colour (Raw seina/Burnt Seina/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying lacquer polish till high gloss finish is achieved complete all as specified and directed. |
| 255 | M&L for preparation of old wooden polished surface ofChair Easy (FD-229/201) by rubbing down the old polish from the wooden surface with sand paper, removing pluck mark with wooden scraper, cleaning of dirtand stopping holes by filling putty (Mixture of fine saw dust, Fevicol, water and colour) and adding colour (Raw seina/Burnt Seina/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying lacquer polish till high gloss finish is achieved complete all as specified and directed. |
| 256 | M&L for preparation of old wooden polished surface ofChair Writing (FD-280/250) by rubbing down the old polish from the wooden surface with sand paper, removing pluck mark with wooden scraper, cleaning of dirtand stopping holes by filling putty (Mixture of fine saw dust, Fevicol, water and colour) and adding colour (Raw seina/Burnt Seina/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying lacquer polish till high gloss finish is achieved complete all as specified and directed. |
| 257 | M&L for preparation of old wooden polished surface ofStool dressing(FD-252/282/FD/E6/MAP/14) by rubbing down the old polish from the wooden surface with sand paper, removing pluck mark with wooden scraper cleaning of dirtand stopping holes by filling putty (Mixture of fine saw dust, Fevicol, water and colour) and adding colour (Raw seina/Burnt Seina/Turky Umber) of required quantity to obtain the desired colour, wiping off superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achieved, wiping off the polish from other than wooden surfaces with polish thinner and applying lacquer polish till high gloss finish is achieved complete all as specified and directed. |
| 258 | Preparation of old painted iron & steel surface of Chair CB SteelwithArms (FD-75M) complete by scraping & rubbing down with sand paper, removing dents and scratches, if any filling the same with paste filler and applying a coat of synthetic enamel paint (Ist grade quality) by brushor by spray machine complete all as specified and directed. |
| 259 | Preparation of old painted iron & steel surface of Chair CB SteelwithoutArms (FD-75M) complete by scraping & rubbing down with sand paper, removing dents and scratches, if any filling the same with paste filler and applying a coat of synthetic enamel paint (Ist grade quality) by brushor by spray machine complete all as specified and directed. |
| 260 | Preparation of old painted iron & steel surface of Chair writing Map (FD/E6/MAP/12) by scraping & rubbing down with sand paper, removing dents and scratches, if any filing the same with paste filler and applying a coat of synthetic enamel paint (Ist grade quality) by brush or by spray machine complete all as specified and directed. |
| 261 | Preparation of old painted iron & steel surface of Chair computer MAP/chair revolving by scraping & rubbing down with sand paper, removing dents and scratches, if any filing the same with paste filler and applying a coat of synthetic enamel paint (Ist grade quality) by brush or by spray machine complete all as specified and directed. (Drg No.FD/E6/MAP/01,TP) |
| 262 | Preparation of old painted iron and steel surface (externally & internally complete) of Almirah large steel/Almirah steel 1/2H 1/2shelf FD-1031/67(M)/FD/E6/MAP/18 by scraping & rubbing down with sand paper, removing dents & scratches if any, filling the same with paste filler and applying a coat of synthetic enamel paint (1st Gde quality) by brush or by spray machine complete all as specified and directed. |
| 263 | Preparation of old painted iron and steel surface (externally & internally complete) of Almirah medium steel FD-1032/243/67(M) by scraping & rubbing down with sand paper, removing dents & scratches if any, filling the same with paste filler and applying a coat of synthetic enamel paint (1st Gde quality) by brush or by spray machine complete all as specified and directed. |
| 264 | Preparation of old painted iron and steel surface (externally & internally complete) of Locker steel FD-1029/257 by scraping & rubbing down with sand paper, removing dents & scratches if any, filling the same with paste filler and applying a coat of synthetic enamel paint (1st Gde quality) by brush or by spray machine complete all as specified and directed. |
| 265 | Preparation of old painted iron and steel surface of Table 900x600x760 mm with drawerFD-1008 by scraping & rubbing down with sand paper, removing dents & scratches if any, filling the same with paste filler and applying a coat of synthetic enamel paint (1st Gde quality) by brush or by spray machine complete all as specified and directed.Note - Wooden portion of table 900x600x760 shall be lacquerpolished with high gloss finish. |
| 266 | Preparation of old painted iron and steel surface (Externally & internally complete) of Table Clerk (steel) FD-1004/381/307/84(M) by scraping & rubbing down with sand paper, removing dents & scratches if any, filling the same with paste filler and applying a coat of synthetic enamel paint (1st Gde quality) by brush or by spray machine complete all as specified and directed.Note - Wooden portion of table office clk steel shall be lacquerpolished with high gloss finish. |
| 267 | Preparation of old painted iron and steel surface (Externally & internally complete) of Table Officer (steel) FD-1002/1003/84(M) by scraping & rubbing down with sand paper, removing dents & scratches if any, filling the same with paste filler and applying a coat of synthetic enamel paint (1st Gde quality) by brush or by spray machine complete all as specified and directed.Note - Wooden portion of table office offr steel shall be lacquerpolished with high gloss finish. |
| 268 | Preparation of old surface of Table Bed Side (MAP) FD/E6/MAP/15, FD/E6/MAP/15(R) by de-rusting the surface and painting with one coat of synthetic enamel paint (Ist quality) black colour complete. Rest all as specified and directed by Engr-in-charge. |
| 269 | Preparation of old surface of Bed Hard steel (MAP) FD/E6/MAP/8,FD/E6/MAP/8(R) by de-rusting the surface and painting with one coat of synthetic enamel paint (Ist quality) black colour complete. Rest all as specified and directed by Engr-in-charge. |
| 270 | Preparation of old surface of Table Computer FD/E6/MAP/03by de-rusting the surface and painting with one coat of synthetic enamel paint (Ist quality) approved colour complete. Rest all as specified and directed by Engr-in-charge. |
| 271 | M&L to repair Chair CB steel with arms by replacing the following parts with first class teak wood/approved ones. Rest all as per the drawings and as directed. |
| 272 | Seat/back having 25mm thickness and 50mm width of rail (duly caned with approved quality of cane and as per godrej pattern) |
| 273 | S&F new MS cleats of size 25mm x 3mmx60mm long duly welded to frame to support seat. |
| 274 | Handle made out of first class teak wood. |
| 275 | Re-caning seat / back. |
| 276 | S&FPVC shoe of approved quality and suitable size. |
| 277 | M&L to repair Chair CB steel without arms by replacing the following parts first class teak wood/approved ones. Rest all as per the drawings and as directed. |
| 278 | Seat/back having 25mm thickness and 50mm width of rail (duly caned with approved quality of cane and as per godrej pattern) |
| 279 | S&F new MS cleats of size 25mm x 3mmx60mm long duly welded to frame to support seat. |
| 280 | Re-caning seat / back. |
| 281 | S&F PVCshoe of approved quality and suitable size. |
| 282 | M&L for preparation of old steel surface of Chair verandah and welding loose joints, if any including de-rusting the surface and painting with one coat of synthetic enamelled paint white colour (1st Grade Quality) and recaning with 4-5 mm half round 0.6 thick plastic cane made out of virgin plastic, in existing pattern complete.Rest all as specified and directed by engr-in-charge.( Drg No. FD-359/256/19 ) |
| 283 | S&F PVC shoe suitable for chair verandah of approved quality. |
| 284 | M&L to repair Chair Writing MAP (made out of tapestry cloth) by replacing unserviceable parts as per drawing. Rest all as directed by engr-in-charg (Drg No.FD/E6/MAP/12) |
| 285 | Only tapestry cloth of seat and back complete. Note:- sample and shade of materials will be determined as per actual requirement at site.Cost of tapestry cloth shall not be less than 150/-per meter. |
| 286 | Tapestry cloth and foam of seat/ back complete. Note:- sample and shade of materials will be determined as per actual requirement at site.Cost of tapestry cloth shall not be less than 150/-per meter. |
| 287 | Only Plywood of seat /back. |
| 288 | M&L repairs to Chair computer/chair revolving (made out of tapestry cloth)by replacingunserviceable parts as per drawings/TP. Rest all as directed by engr-in-charge. (TP) |
| 289 | Only tapestry cloth of seat and back complete. Note:- sample and shade of materials will be determined as per actual requirement at site.cost of tapestry cloth shall not be less than 150/-per meter. |
| 290 | Tapestry cloth and foam of seat/ back complete. Note:- sample and shade of materials will be determined as per actual requirement at site.cost of tapestry cloth shall not be less than 150/-per meter. |
| 291 | Only Plywood of seat /back. |
| 292 | Hydraulic of suitable size. |
| 293 | Base PVC/Iron of suitable size and pattern. |
| 294 | Wheel of suitable size and pattern. |
| 295 | Arms as requred by size and design. |
| 296 | M&L to repair Almirah steel large/Almirah steel 1/2H 1/2shelfby replacingthe following unserviceable parts with approved ones.Rest all as per the drawings and directed by Engr-in-charge. (DRG NO. FD-1031/ 67(M))/FD/E6/MAP/18) |
| 297 | MS lock 6 leverwith duplicate key. Note:- Pattern and shape of lock and handle will be determined as per actual requirement at site. |
| 298 | Chromium platedhandle 150mm long. |
| 299 | Leg made out of 1mm thick MS sheet duly painted with one coat of red oxide primer. |
| 300 | Pane glass 3.5/ 4mm thick of almirah glazed large steel. |
| 301 | M&L to repair Almirahmedium/small steel by replacingthe following unserviceable parts with approved ones.Rest all as per the drawings and directed by Engr-in-charge.(DRG NO. FD-1032/243/67M)) |
| 302 | MS lock 6 leverwith duplicate key. Note:- Pattern and shape of lock and handle will be determined as per actual requirement at site. |
| 303 | Chromium plated handle 150mm long. |
| 304 | Leg made out of 1mm thick MS sheet duly painted with one coat of red oxide primer |
| 305 | Pane glass 3.5/ 4mm thick of almirah small glazed steel. |
| 306 | M&L torepair Locker steel by replecing the following parts with approved ones.Rest all as per drawings anddirected by Engr-in-charge. (DRG NO. FD-257/1029) |
| 307 | Chromium platedhasp and staple 75mm long. |
| 308 | Chromium plated handle 100mm long. |
| 309 | MS hinge 75mm long. |
| 310 | M&L to repair Table 900mm x 600 mm with drawerby replacing the following parts with approved ones as mentioned below andas per the drawing and directed by Engr-in-charge.(DRG NO. FD-1008 ) |
| 311 | MS lock of suitable size with duplicate key. |
| 312 | PVC handle of approved quality suitable for drawer. |
| 313 | Making the drawer functional by removing dents from MS sheet align and leveling the drawer and greasing it grooves so as to achieve smooth sliding complete. |
| 314 | Top made out of 18mm thick pre-laminated MDF board (exterior gde) one side classic walnut face and balancing white on other side duly teakwood beading 4x18/19mm all around of suitable size fixed by panel pins and adhesive with diamond cut pattern finishing at corners. Rest all as per the drawings and directed by Engr-in-charge. |
| 315 | S&F PVC/hard rubber toe of approved quality and suitable size. |
| 316 | M&L to repair Table 900mm x 600mm without drawer steelby replacing the top made out of 18mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF-12) one side Classic walnut face and balancing white on other side with teakwood beading 4x18mm thick all around of suitable size fixed by panel pins and adhesive with diamond cut pattern finishing at corners and polished with high gloss finish of lacquer polish. Rest all as per the drawing and directed by Engr-in-charge. (DRG NO. FD-1007 ) |
| 317 | Preparation of old surface of Table 900mmx600mm without drawer steel by de-rusting the surface and painting with one coat of synthetic enamel paint (Ist quality) OG colour complete.Rest all as specified and directed. |
| 318 | S&F PVC/hard rubber toe of approved quality and suitable size. |
| 319 | M&L to repair Teapoy verandah by replacing the top made out of 18mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF-12) one side Classic walnut face and balancing white on other side with teakwood beading 4x18mm thick all around of suitable size fixed by panel pins and adhesive with diamond cut pattern finishing at corners and polished with high gloss finish of lacquer polish. Rest all as per the drawings and directed by Engr-in-charge. (DRG NO. FD-255 /208/ 35 ) |
| 320 | Preparation of old surface of teapoy verandah by de-rusting the surface and painting with one coat of synthetic enamel paint (Ist quality) white colour complete. Rest all as specified and directed by Engr-in-charge. (DRG NO.FD-255 /208/ 35) |
| 321 | S&F PVC toe for teapoy verandah of approved quality and suitable size. |
| 322 | M&L to repair Teapoy verandah (MAP) by replacing the top made out of 18mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF-12) one side Classic walnut face and balancing white on other side with teakwood beading 4x18mm thick all around of suitable size fixed by panel pins and adhesive with diamond cut pattern finishing at corners and polished with high gloss finish of lacquer polish. Rest all as per the drawing and directed by Engr-in-charge. (DRG NO.FD/E6/MAP/17 ) |
| 323 | Preparation of old surface of teapoy verandah MAP by de-rusting the surface and painting with one coat of synthetic enamel paint (Ist quality) black colour complete. Rest all as specified and directed by Engr-in-charge. (DRG NO. FD/E6/MAP/17) |
| 324 | S&F PVC/Hard rubber toe for teapoy verandah (MAP) of approved quality and suitable size. |
| 325 | Spot welding on various items of steel furniture FD/TP |
| 326 | M&L to repair Table Clerk (steel) by replacing the following parts with approved ones.Rest all as per the drawings and directed by Engr-in-charge. (DRG NO. FD-1004/381/307/84(M)). |
| 327 | MS lock of suitable size with duplicate key. |
| 328 | S&F PVC handle of approved quality suitable for drawer. |
| 329 | Making the drawer functional by removing dents from MS sheet align and leveling the drawer and greasing it grooves so as to achieve smooth sliding complete. |
| 330 | Top made out of 18mm thick pre-laminatedexterior gde MDF board OSL (Designation PLMDF-12) one side Classic walnut face and balancing white on other side with teakwood beading 4x18mm thick all around of suitable size fixed by panel pins and adhesive with diamond cut pattern finishing at corners . Rest all as per the drawings and directed by Engr-in-charge. |
| 331 | S&F PVC/Hard rubber toe of suitable size. |
| 332 | M&L to repair Table Officer (steel) by replacing the following parts with approved ones.Rest all as per drawings anddirected by Engr-in-charge.(DRG NO. FD-1003/84(M)). |
| 333 | MS lock of suitable size with duplicate key. |
| 334 | S&F PVC handle of approved quality suitable for drawer. |
| 335 | Making the drawer functional by removing dents from MS sheet align and leveling the drawer and greasing it grooves so as to achieve smooth sliding complete. |
| 336 | Top made out of 18mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF-12) one side Classic walnut face and balancing white on other side with teakwood beading 4x18mm thick all around of suitable size fixed by panel pins and adhesive with diamond cut pattern finishing at corners. Rest all as per the drawings and directed by Engr-in-charge. |
| 337 | S&F PVC/Hard rubber toe of suitable size. |
| 338 | M&L to repair Table bed side (MAP) by replacing the following parts with prelaminated MDF board(exterior gde)/plywood BWR gde. Rest all as per drawings anddirected by Engr-in-charge. (DRG NO. FD/E6/MAP/15,FD/E6/MAP/15(R)) |
| 339 | Top made out of18mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF-12) one side Naina teak/Classic walnut face and balancing white on other side duly provided with teakwood beading of suitable size. |
| 340 | Side made out of18mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF-12) one sideNaina teak/ Classic walnut face and balancing white on other side complete. |
| 341 | Back made out of plywood 6mm thick BWR Gde. |
| 342 | Upper drawer complete excluding handle. |
| 343 | Lower drawer complete excluding handle. |
| 344 | CP handle 100mm long of approved quality. |
| 345 | S&F PVC/Hard rubber toe of suitable size. |
| 346 | M&L to repair Bed hard (MAP)by replacing the following unserviceable parts with approved ones.Rest allas per drawings and directed by Engr-in-charge. (DRG NO. FD/E6/MAP/08,FD/E6/MAP/08(R ) |
| 347 | Plywood 12mm(9 ply) thick BWR Gde. |
| 348 | Pre-laminated MDFboard(exterior gde) of Head rest complete. |
| 349 | Pre-laminated MDFboard(exterior gde) of foot rest complete. |
| 350 | S & F PVC/Hard rubber toe of suitable size. |
| 351 | M&L to repair Table computer by replcing the following parts with prelaminated exterior gde MDF board OSL (Designation PLMDF-12).Rest all as per the drawings and as directed by Engr-in-charge. (DRG NO.FD/E6/MAP/03,TP) Note:-Sample and shade of materials will be determined as per actual requirement at site. |
| 352 | Top made out of18mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF-12) one side Naina teak/Classic walnut face and balancing white on other side duly provided with teak wood beading 4x18mm thick all around of suitable size fixed by panel pin and adhesive with diamond cut pattern finishing at corners. |
| 353 | Side made out of18mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF-12) one side naina teak/Classic walnut face and balancing white on other side complete. |
| 354 | All as per item no 83.01 but Key board tray complete excluding telescopic channel |
| 355 | All as per item no 83.01but pull out tray complete excluding telescopic channel. |
| 356 | All as per item no 83.01 butdrawer complete excluding knob. |
| 357 | All as per item no 83.01butmiddle shelf including vertical portion complete. |
| 358 | All as per item no 83.01 but bottom shelfcomplete. |
| 359 | Telescopic channel of suitable size and approved quality. |
| 360 | M&L to repair Table dining OR Steel by replacing the top made out of 18mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF-12) one side Classic walnut face and balancing white on other side with teakwood beading 4x18mm thick all around of suitable size fixed by panel pins and adhesive with diamond cut pattern finishing at corners and polished with high gloss finish of lacquer polish. Rest all as per the drawing and directed by Engr-in-charge. (DRG NO. FD-165(M) ) |
| 361 | Preparation of old surface of Table dining OR Steel by de-rusting the surface and painting with one coat of synthetic enamel paint (Ist quality) black colour complete.Rest all as specified and directed by Engr-in-charge. |
| 362 | S&F PVC/Hard rubber toe of approved quality and suitable size. |
| 363 | Removing of unserviceable plywood from Charpoy plywood top (MAP) (FD/MAP-II/01) and providing 12mm thick (9 ply) plywood BWR Gde with suitable size of nut and bolt including welding of loose joints if any, and painting by brush or by spray machine with one coat of Ist quality synthetic enamel paint of approved shade complete.Rest all as per the drawing & directed by Engr-in-charge. |
| 364 | Removing of U/S Plywood from Charpoy GI Pipe Plywood Top (FD-220) and S&F new Plywood 12mm thick ( 9 ply) of BWR Grade ISI Maked ofSize 1990x915mm with Nut & Bolt as required.Make of Plywood shall be Archidply (Silvi)/Duro (Duromac)/Centuryply (Sainik)/Greenply(Ecotec) BWR Gde .Rest all as specified and directed by Engr-in-Charge. |
| 365 | Welding of loose joint offlatIron of charpoy GI pipe plywood top. |
| 366 | Tightening of complete frame & welding loose joint of GI pipe with frame of charpoy GI pipe plywood top. |
| 367 | M&L for preparation of old surface of flat iron (02 Nos) and painting the samewith one coat of synthetic enamelled paint black colour (Ist grade quality) complete. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
