|
| 1 | Civil Works |
| 2 | Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete.(No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level) a) From Primary Producer: TATA/SAIL/Esser Steel/ Jindal steel/Shyam steel/RINL(i) TMT Corrosion resistant steel (CRS) reiforcement bar |
| 3 | Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0 M and removal of the same for in-situ reinforced concrete and plain concrete work inUsing 25mm thick plank: |
| 4 | Providing and laying Plain/Reinforced cement concrete works in prop 1:2:4 including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete works (shuttering where necessary shall be measured and paid separately).Using mixture machine.in superstructure from plinth level upto 1st floor |
| 5 | 230mm thick brick wall in cement morter with 1st class brick including racking out joints and curing complete as directed in structure In superstructure above plinth level up to 1st floor level. In proportion 1:4.(1 cement:4 sand) |
| 6 | 15mm thick cement plaster in single coat on rough side of single or half brick wall for interior plastering up to Ist floor level including arises, internal rounded angles, not exceeding 80mm in girth and finished even and smooth including curing complete as directed.On Rough sideIn proportion 1:4 |
| 7 | Applying one coat of cement primer of approved brand and manufacture on new wall surface after throughly brooming the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth. |
| 8 | Finishing wall with water proofing cement paint of approvedbrand and manufacture and of required shade on new wall surface (two coats) to give an even shade after throughly brooming the surfaces to remove all dirt and remains of loose powdered materials. |
| 9 | Supplying fitting and fixing M.S.angles, M.S. flat, M.S. bolts and nuts including painting with red lead paint one coat complete as directed.(a) M. S. Angles (50x50x6)mm(b) ISSQ 8mm dia bars(c)M. S. Flats(30x4)mm |
| 10 | Steel work welded in built up sections, framed work including cutting, hoisting and fixing in positions and applying priming coat of red-lead paint including drilling holes, supplying, fitting and fixing with bolts and nuts or welding, if necessary as directed.In beams and joists with connecting plates/ angled cleat. |
| 11 | Applying primary coat over new steel and other metal surface over 100m in width or girth after preparing the surface by throughly cleaning oil,grease, dirt and other foreign matter and scoured with wire brushes, fine steels, wood scrapers and sand paper.. With ready mixed \"red-lead/ red oxide\" primer. |
| 12 | .Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint of approved brand and manufacture(Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surface of all dirt, dust and other foreign matter.(ii).Surfaces up to 100mm in width or girth.a). General purpose (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac). |
| 13 | Dismantling of existing structure for lapping of reinforcement bars for continuation of RCC columns and rasing the wall,welding,binding,dismantling, cleaning of surface etc. including jungle clearance, uprooting of vegetation, grass, brush-wood,sapling and trees and disposal of the same outside the Bijulee Bhawan campus at their own cost and arrangement and making acess to the work site to complete the work in all respects. |
| 14 | Providing & fixing concertina coil fencing with required dia 610mm (having 15 nos round per 6 meter length) up to 3.00m height of wall with existing angle iron Y shaped placed 2.4m or 3.00m apart and 9 horizontal RBT (Reinforced Barbed …………………………..wire of high tensile strength of 165 kg/sq.m with tape (0.52mm thicks and weight 43.478 8m/meter (cost of M.S angle, C.C. blocks shall be paid separately). |