Construction Of Veterinary Hospital At Athai Basta In Distt.- Bijnor
Tender Value
30.01 Lakhs
Estimated cost
Bid Submission
27 Jul 2022
0 days left
EMD
71000
Bank guarantee accepted
Document Fee
5900
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
basta → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Veterinary Hospital At Athai Basta In Distt.- Bijnor
BOQ
| Sl. No. | Item Description |
| 1 | CIVIL WORKExcavation of foundation in ordinary soil (loam clay or sand) including lift upto 1.50 meter and lead upto 30 meter and including filling, watering and ramming of excavated earth into the trenches or into the space between the building and sides of foundation trenches or into the plinth and removal and disposal of sur-plus earth as directed by the Engineer incharge up to a distance of 30 meters from the foundation trenches. |
| 2 | Filling of carted earth with cartage and manually/mechanically compaction complete. |
| 3 | Providing and laying in cement concrete 1:4:8 (1 cement :4 coarse sand :8 graded stone aggregate 40 mm nominal size) and curing complete,including cost of form- work, in foundation and floors. |
| 4 | Providing and injecting chemical emulsion for preconstructional antitermite treatment in flooring |
| 5 | R.C.C. work with M-20 Garde concrete in Plinth & Lintel Beam including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. |
| 6 | R.C.C. work with M-20 Garde concrete in Slab including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. |
| 7 | R.C.C. work with M-20 Garde concrete in Beam including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. |
| 8 | R.C.C. work with M-20 Garde concrete in Footing including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. |
| 9 | R.C.C. work with M-20 Garde concrete in Column including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. |
| 10 | Ist Class brick work in 1:4 cement mortar infoundation & plinth including supply of all materials, labour, tools and plants etc. required for proper completion of the work. |
| 11 | Ist Class brick work in 1:4 cement mortar in super-structure above plinth level includingnecessary cutting and moulding of bricks as requiredand also including honey comb brick work thickness of wall 230 mm thick. |
| 12 | Ist Class brick work in 1:4 cement mortar in super-structure above plinth level includingnecessary cutting and moulding of bricks as requiredand also including honey comb brick work thickness of wall 115 mm thick. |
| 13 | Providing & laying \"brick Coba\" 120mm thick laid with brick bat coba 7.50 cm thick with gap of 15mm to each other, over 20mm thick base of cement mortar 1:4 cement and coarse sand mixed with water proofing compound spreading cement slurry mixed with acrylic cement concrete water proofing compound complete |
| 14 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick |
| 15 | Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer Tubular section Door & Windows |
| 16 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. |
| 17 | P/fixing, cutting, bending and binding of Reinforcement (T.M.T. Steel) in R.C.C. work to required shape as necessary including bending for proper completion of the work and including cost of binding wire. |
| 18 | 15 mm thick plinth plaster. 1 cement : 4 coarse sand |
| 19 | 12mm cement plaster in single coat on fair side of single or half brick wall for exterior plastering up to floor two level including internal rounded angles chamfers, and/or roundedangles not exceeding 80mm in girth and finished even and smooth no extra for mixing any additive. (1)1 cement : 4 C. sand |
| 20 | 12 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. (1) 1 cement : 4 C. sand |
| 21 | Making grooves 10 to 12mmwide xam deep in plaster of the walls or in ceiling vertically or horizontally as required. |
| 22 | Providing and laying of 8 to 10 mm thick ivory or light shade vitrified tiles of 600 x 600 mm size in flooring or skirting laid with 1:3 cement mortar ( 1 cement : 3 coarse sand) finished with cement slurry & with pigment grouting & polishing complete including supply of all materials, labour and tools and plants etc. requirwd for proper completion of the work. |
| 23 | Providing and fixing 18 mm thick (Granite) gang saw cut, mirror polished,premoulded and prepolished, machine cut for kitchen platforms, vanitycounters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cementmortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement,mixed with matching pigment, epoxy touch ups, including rubbing, curing,moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of slab over 0.50 sqm [IN FLOORING] |
| 24 | Supply and fixing 6 mm (1/4\")thick china white glazedtiles inflooringorin skirting or dado laid with1:3 cement and approved coarse sand mortar finished with whitecement slurry jointing and polishing complete includingsupplyof allmaterials, labour and tool sand plantsetc.required forproper completion of the work. |
| 25 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with aloating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate. |
| 26 | 20 mm thick rough cast exterior cement plaster on walls consisting 10 mm thick backing cast of 1:3 cement mortar (1 cement :3 coarse sand) and 10 mm thick finishing coat of 1:3 cement mortar (1 cement 3 coarse aggregate of size 6mm to 12mm) including arises chamfers and/or rounded angles not exceeding 80 mm |
| 27 | Providing & fixing glass strips of 3 mm thickness in joints of floor and skirting at the time of laying floors flush with floor level Including labour tools plants etc. complete. of 35 depth |
| 28 | Painting two coat over priming coat on steel and other metal surfaces up to 10 cm. width or girth or small articles not exceeding 0.10sqm in area white superior synthetic enamel such as LUXOL3, DULUX specified brushing to give an even shade & including cleaning the surface of all dirt,dust and other foreign matter sand papering & stoping including cost of all materials, labour T & P etc. |
| 29 | Finishing walls with Premium Acrylic Smooth exterior paint (Apex) of required shade: New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm). |
| 30 | Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as Berger,J&N, Shalimar, Asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approved synthetic material & sand papered smooth including cost ofall materials. |
| 31 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 32 | Providing & fixing fly proof wire gauze to windows, clerestory windows &doors with M.S. Flat 15x3 mm and nuts & bolts complete. Stainless steel (grade 304) wire gauze of 0.5 mm dia wire |
| 33 | Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws :9.27.1.1 with ISI marked M.S. pressed butt hinges bright finished of required size |
| 34 | P/F 4mm thick float glass panes with putty/nails of Modi/equivalent I.S.I. marked quality putty, brads and springs complete. |
| 35 | Providing stainless steel sliding bolts 16 mm dia with nuts and 250 mm long. |
| 36 | Providing stainless steel tower bolt with 10 mm dia and screw. (i) 250 mm long |
| 37 | Providing stainless steel door handles with screws 125 mm long. |
| 38 | Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete |
| 39 | Making plinth protection 25 mm thick of cement concrete 1:2:4 (1 cement :2 coarse sand : 4graded stone aggregate 20mm nominal size) over 75 mm bed by dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. |
| 40 | Mild steel or iron workofsmall sizes and sections suchas Cattle Crush of required design including supply ofsteel itswastage with costof bolts, nuts andwelding, grinding and making holes as required completion of workfabrication. |
| 41 | Construction of Handpump with Boring 100 mm diameter PVC casing pipe 38 M depth with 40 mm dia G.I. pipe for lowering including India Mark II Hand pump M/c includind all accessories and its C.C. plateform complete. |
| 42 | Making Soak pit 1.25m diameter 2.5 mt depth including excavation disposal of surplus earth refilling it with coarse aggregateand RCC slab on top 1 :2 :4 with 450mm dia manhole cover and frame complete as required as per the standard design. |
| 43 | Providing M.S. foot rest including fixing with 20x20x10 cm. cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 gradded aggregate of nominal size 20mm) as per standard design with 20x20mm sq bars. |
| 44 | Providing and fixing C.I. tee at the inlet and outlet of septic tank. |
| 45 | Providing & fixing 75mm dia vent pipes. |
| 46 | Providing & fixing of 75mm dia cast iron terminal guard |
| 47 | Providing and fixing in position precast RCC manhole cover and frame of required shape and approved quality. (a) M.D. -10- Circular shape 500mm internal diameter |
| 48 | b) M.D. -2.5- Circular shape 450mm internal diameter |
| 49 | Sanitary-Work Providing & fixing white vitereous china water closet squatting pan ISI marked (Indian type W.C. pan) with 100mm sand cast iron P or S trap, 10/12.5 litrsPVC low level flushing cistern with fittings & brackets 40mm dia C.P. flush pipe with fitting & clamps, 20mm over flow pipe with specials and mosquito proof coupling of approved municipal design, painting wherever required including cutting & making good the walls & floors where required. Orissa Pattern W.C. pan of size580x 440mwith integral type foot rests flush pipe and over flow arrangement. |
| 50 | Providing & fixing white vitreous china wash basin with C.I. brackets painted white, 15mmbrass pillar taps, brass chain with rubber plug, 32mmbrass waste of standard pattern including cutting & making good the walls wherever required. a) Flat back wash Basin size 550x400 mm with single 15mmbrass pillar tap. |
| 51 | Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required : Size 600x450x200 mm |
| 52 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. |
| 53 | Providing & fixing PTMT towelrail 600 mm long complete with cleats and screw |
| 54 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour weighing not less than 105 gms. |
| 55 | Providing & fixing PVC waste pipe for wash basin including PVC waste fitting Complete Flexible Pipe 32mm Dia |
| 56 | Providing & fixing soil, waste and vent pipes. (a) 100mm dia PVC pipe. |
| 57 | b) 75mm dia PVC pipe. |
| 58 | Providing and fixing of PVC Elbow bend with access door (a) 100mm dia |
| 59 | b) 75mm dia |
| 60 | Providing and fixing of PVC Tee bend (a) 100mm dia |
| 61 | b) 75mm dia |
| 62 | Providing and fixing PVC collar. (a) 100mm dia |
| 63 | b) 75mm dia |
| 64 | Providing and fixing PVC trap of self cleansing design withcast iron screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors.100 mm inlet and 100 mm outlet, |
| 65 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110 mm |
| 66 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.110 mm |
| 67 | Providing and fixing CPVC Pipes complete with CPVC fittings and clamps, i/c making good the walls etc. concealed pipe, cutting chases and making good the wall (a) 15 mm nominal outer dia pipes |
| 68 | b) 20 mm nominal outer dia pipes |
| 69 | Providing and fixing G.I. pipes complete with GI fittings and clamps including cutting and making good the walls etc. External work(a) 20 mm nominal outer dia pipes |
| 70 | b) 25 mm nominal outer dia pipes |
| 71 | Providing & fixingbrass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. a) 15mm nominal bore |
| 72 | Providing and fixing C.P. brass bib cock of approved quality conforming 15mm Dia |
| 73 | Providing and fixing PTMT grating of approved quality and circular 100 mm dia |
| 74 | Providing and fixing ball valve (brass) of approved quality complete.(High or low pressure with plastic floats) a) 20 mm. Nominal bore |
| 75 | Providing and fixing 45 cm long unplasticised PVC connection pipe with brass unions. a) 15mm nominal bore |
| 76 | Providing and fixing C.P.brass angle valve for basin mixer and geyser points of approved quality conforming to IS 8931 a) 15 mm nominal bore. |
| 77 | Providing and fixing gun metal gate valve with wheel of approved quality. a) 25mm dia nominal bore |
| 78 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank of approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. Capacity 500 litre |
| 79 | Excavating trenches in all kind of soil of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5 m.including getting out the excavated soil & then returning the soil as required, in layers not exceeding 20cm in depth. a) Pipes 80mm to 300mm diameter. |
| 80 | Providing, laying and joining PVC pipes grade \"A\"with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete. (a) 150mm diameter |
| 81 | b) 100mm diameter |
| 82 | Providing & laying cement concrete 1:5:10 (1 cement :5 coarse sand :10 graded stone aggregate 40mm nominal size) alround PVC Pipes including bed concrete as per standard design. (a) 150mm diameter PVC Pipe |
| 83 | b) 100mm diameter |
| 84 | Providing and fixing square mouth S.W. Gully trap grade \"A\" comp. with C.I. grating brick masonry chamber with F.P.S. bricks of class designation 75 & water tight C.I. cover with frame of 300 x 300mm.size (inside) the weight of cover to be not less than 4.50 Kg & frame to be not less than 2.70 Kg as per standard design. a) 150 x 100 mm. size P type |
| 85 | Constructing brick masonry manhole with 75 class designation F.P.S. bricks in cement mortar 1:4 (1 cement : 4 coarse sand) RCC top slab with 1:2:4 mix (1 cement : 2 coarse sand: 4graded stone aggregate 20mm nominal size); foundation concrete 1:4:8 mix (1 cement :4coarse sand: 8 graded stone aggregate 40mm nominal size) inside plasstering 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 complete as per standard design. a) Inside size 90x80 cm & 45 cm deep including C.I. cover with frame total wt. of cover & frame to be not less than 38 Kg (wt. of cover 23 Kg & wt. of frame 15 Kg. |
| 86 | Electrical-WorkWiring points for light with 1.50 sqmm.FR PVC insulated multistrand single core copper condutor cable in PVC conduit pipe partly concealed in wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sqmm.FR PVC insulated multistrand copper conductor cable as earth continuity wire and piano type switch etc. complete in all respects. |
| 87 | Same as item above but for fanandlight duty exhaust fan. |
| 88 | Same as item above but for5 Amp plug point |
| 89 | Supply & wiring of submains with 2 nos. 2.5 sq.mm & with 1 no. earth wire of 1.5 sq.mm FR PVC insulated 1100 V grade single core multistrand copper conductor cable in existing PVC conduit complete, including supply of all material, labourand T&P etc. required for proper completion of the work as directed by Engineer I/C. |
| 90 | Supply and wiring of submain 2 number 4 sqmm . FR PVC insulated 1100 V grade multistranded single core copper conductor cable in heavy duty 20mm dia PVC conduit partly concealed in wall and partly laid in slab along with one number 2.5 sqmm FR PVC insulated multistranded copper conductor cable as earth contunity wire etc. complete in all respects. |
| 91 | Erection and testing of ceiling fan and regulator for room height upto 3.5mts. including supply of 3mm thick G.I. down rod 19mm dia duly painted, complete in all respects. |
| 92 | Erection and testing of Exhaust fan and regulator for room height upto 3.5mts. including supply of 3mm thick G.I. down rod 19mm dia duly painted, complete in all respects. |
| 93 | S/F of hexagonal fan box with hexagonal side of approx 80mm in length fabricated from 16SWGM.S. sheet incorporating 10mm dia, M.S. round barduly bent for supporting fan hanger dully painted withred oxide and screwing arrangement with wiring conduit laid in the R.C.C. roof before concreting along with supply of all materials, labour T & P etc., for proper completion of work. |
| 94 | Supplyfixingofelectronic fan regulator (modular) 120-280 V. ISImarked, on the existing switch board including making connetion, required material, labour T/P etc for proper completion of work to the satisfaction of Engineer in charge of work. |
| 95 | S/F of LED tube light with batten suitable for up to 1X22 watt LED tube light fitting including tube on suraface complete in all respect.CAT-AAA 1 x 22 Watt. |
| 96 | Construction of recess distribution board of all sizes including cutting of brick work providing lintel of suitable size & thickness plastering etc. with supply of all materials, labours, T & P etc. required for proper completion of work. 600x480x200 mm. size |
| 97 | Supply and fixing of flush/surface mounting TPN distribution boards with without MCB with additional metal doorcomplete in all respects. 4 Way TPN |
| 98 | Supply and fixing of flush/surface mounting SPN distribution boards with without MCB with additional metal doorcomplete in all respects. 4 Way SPN |
| 99 | Supply and fixing of 240 volts \"L\" series miniature circuit breaker 6 Amp. To 32 Amp. (10 K A ) in existing MCB, DB complete with connections as required.6 - 32 amps. |
| 100 | Supply fixing of 63 Amp.Isoletor 2 pole |
| 101 | Supply and fixing of power plug with 15A/250 V flush type Modular switch and 5 Pin 15 A/250V flush type universal socket in suitable M.S. box of 175mmx100x50mm size with phenolic laminated bakellite sheet cover 3mm thick fixed with brass machine screws and cup washer. |
| 102 | Supply and burying each electrode for lighting conductor of 600mm x 600 mm x 3mm G.I plate, vertically with its top atleast 3 mts. below ground level complete with 20mm G.I.pipe for watering funnel,30cm square C. I. frame with hinged cover, masonary housing, alternate layers of charcoal/ coke and salt at least 150mm thick alround etc. as per direction of Engineer-in-charge complete in all respects. |
| 103 | Supply and fixing of two number 8 SWG G.I. wire in 15mm dia. G.I. pipe for earthing, laid in ground or in wall duly concealed including the cost of cement, sand, labour, T&P other material required for proper completion of work as directed at side. |
| 104 | Supply and laying of aluminium conducter, PVC insulated armoured, served, sheeted cable 1100 Volts grade at a depth of 750mm below ground level over a cushion of 75mm thick sand alround and protected with burnt bricks on sides and top on surface, the cable run shall be fixed on M.S. clamps etc. of suitable size.as per direction of Engineer-Incharge.complete in all respect The armouring of the cable shall be properly connected with the earth conductor by clamps etc.size 10 sq mm x 2 core |
| 105 | Supply & fixing of Batton Holder with LED Bulb 9 watt. |
| 106 | Supplyof AC 1200mm Sweep, 230/250 Volts, 50 Hz ceilling fan with standard down rod, blades including connection etc. complete as required |
| 107 | Supply of AC 300mm Sweep 230 Volts, 50 Hz exhaustfan (Heavy Duty) withblades,cover etc. complete as required. |
AI Tender Summary
Tender Timeline
Jul 21, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedJul 27, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 27, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender