Beautification Of Bhairavnath Mandir At Ranvali Taluka - Shrivardhan, District Raigad
Tender Value
99.14 Lakhs
Estimated cost
Bid Submission
25 Jul 2022
0 days left
EMD
99140
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
shrivardhan → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Beautification Of Bhairavnath Mandir At Ranvali Taluka - Shrivardhan, District Raigad
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 25-Jul-2022 | Date | Date | 26-Jul-2022 |
BOQ
| Sl. No. | Item Description |
| 1 | Item No.1:-Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removingthe excavatedmaterialuptoadistanceof50m.beyondthebuildingareaand stackingandspreadingas directed,dewatering,preparingthebedforthefoundationand necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means |
| 2 | Item No.2:- Excavation for foundation in Hard murum including removing the excavated material upto a distanceof50 metresbeyondthebuildingareaandstackingandspreadingasdirected, dewatering,preparingthebed forthefoundationandnecessarybackfilling,ramming, wateringincludingshoringand struttingetc. complete. (Lift from1.5 to3.0m.) By Mechanical Means |
| 3 | Item No.3 :-Providingdry/trap/granite/quartzite/gneissrubblestonesoling15cmto20cmthick including hand packing and compacting etc. complete. |
| 4 | Item No4:- Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/granite/quartzite/gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishingifrequiredandcuringcomplete,withfullyautomaticmicroprocessorbasedPLCwithSCADAenabledreversibleDrumTypemixer/concreteBatchmixplant(Panmixer)etc.complete.Withfineaggregate(CrushedsandVSIGrade). |
| 5 | Item No.5:- Providing and casting in situ cement concrete M20 of trap metal for R.C.C.. work like raft, grillage, strip, foundations and footing of R.C.C. Columns and steel stanchions, including bailing out water manually, centering, formwork, compacting, finishing and curing etc. complete. (Excluding steel reinforcement) |
| 6 | Item No.6:- Providing and casting in situ cement concrete M20 of trap metal for R.C.C.columns as per detailed designs and drawings or As directed by Engineer-In-Charge., including centering, formwork, compacting, roughening the surface if special finish is to be provided and curing etc. complete. (Excluding steel reinforcement) |
| 7 | Item No.7:- Providing and casting in situ cement concrete M20 of trap metal for R.C.C. Beams and Lintels as per detailed drawings and designs or as directed by Engineer-In-Charge., including centering formwork, compacting, roughening the surface if special finish is to be provided and curing etc. complete. (Excluding steel reinforcement.) |
| 8 | Item No.8- Providing and casting in situ cement concrete M20 of trap metal for R.C.C. Slabs and landings of all thickness as per detailed drawings and designs, including centering, formwork, compacting, roughening the surface if special finish is to be provided and curing etc. complete. (Excluding steel reinforcement) |
| 9 | Item No. 9 :- Providing cast in situ / ready mix M20 grade cement concrete for head walls of CD work / retaining walls etc. including necessary form work, compaction, finishing andcuring etc. complete. (withreversible drum typemixer/ concrete batch mix plant (pan mixer)with SCADA |
| 10 | Item No. 10 :- Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/gneiss metal for R.C.C.coping to plinth or parapet and sill of doors and windows moulded as per detaileddrawings or chamfered as approved by the Engineer including steel centering, formwork, cover blocks,laying/pumping, compacting , curing , finishing and roughening them if special finish is to beprovided and curing complete. (Excluding reinforcement and structural steel).with fully automaticmicro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mixplant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 11 | Item No.11:-Providing and fixing in position TMT steel bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams, columns, canopies, staircases, newels, chajjas, lintels, pardies, coping, fins, arches, etc. as per detailed designs, drawings and schedules, including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required etc. complete |
| 12 | Item No.12:- Filling in plinth and floors with approved excavated materials in 15cm. To 20cm. layers including watering and compaction complete. |
| 13 | Item No13 :- Providing Second Class Burnt Brick masonry with conventional/I.S. type bricks in cement mortar 1:6 in superstructure, including striking joints, racking out joints, watering and scaffolding etc. complete. |
| 14 | Item No. 14 :- Providing Second Class Burnt Brick masonry with conventional / I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6mm diameter / 2 hoop iron strips 25mm x 1.6 mm painted with anticorrosive paint at every third course properly bent and bonded at ends, scaffolding, racking out joints and watering etc. complete. |
| 15 | Item No.15:- Providing internal cement plaster 12 mm thick in a single coat, in cement mortar 1:4 without neeru finish to concrete or brick surface in all positions including racking out joints, scaffolding and curing etc. complete ( For Finished Side) |
| 16 | Item No.16:- ProvidingwaterproofbeddingforflooringofBath andWC 25mmthickin C.M.1:3including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee on court fee |
| 17 | Item No.17:- ProvidingwaterproofplasterinW.C.andbath 12mmthickfordadoincementmortar1:3withneat finishing, floating using waterproofing compound at the rate of 1 Kilogram. per bag of cement of approved make and manufacturer and curing etc. complete.(Excluding Tiles) (As directed by Engineer in Charge) |
| 18 | Item No. 18 :- Providing internal cement plaster 20 mm thick in two coat,in cement mortar 1:4 without neeru finish to brick masonry or concrete surface in all positions. |
| 19 | Item No. 19 :- Providing internal cement plaster 6mm thick in a single coat 1:3 without neeru finish to concrete surface in all position including scaffolding and curing etc. complete.. |
| 20 | Item No.20:- Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / OceanBrown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing,etc. complete. |
| 21 | Item 21:-Providingandlayingceramictilesof havingsize30cm.x30cm.andconfirmingto correspondingI.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. |
| 22 | Item No.22:- Providing and laying Antiskid Ceramic tiles of approved quality of size 30 cmx30 cm and confirming to IS 15622-2006 (Group-BIIA) for anti skid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete.. |
| 23 | Item 23:- Providing and laying precast polished chequered colour cement tiles of size 20 x 32 and 20 mm thick for treads and riser of steps and staircase with nosing of treads moulded as per drawing or as directed on bed of 1:4 cement mortar including neat cement float, filling joints with cement slurry mixed with approved shade of pigment to match the colour of tiles, curing, polishing and cleaning etc. complete. |
| 24 | Item No.24:-Providing and fixing machine cut mirror polished 18mm to 20mm thicktelephone black/ Amba White/ Cat bary brown/ RBI red/ Ocean Brown granite stone partitions with rounding the edgescuring and cleaning etc. .As directed by Engineer Incharge |
| 25 | Item No.25:- Providing and fixing in position powder coated aluminium louvered windows/ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80x38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete. (D.S.R.2012-13,I/P=39/71) |
| 26 | Item No.26:-Providing and fixing solid core flush door shutterin single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brassmortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. |
| 27 | Item No. 27:-Providing and fixing 30mm thick SOLID PANEL PVC INTERNAL DOOR SHUTTER consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 40mm x 20mm for stiles ,top, lock and bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame shall be covered with 5mm thick heat molded PVC channel of size 30 x 100mm forming stiles, and 5mm thick, 125mm wide PVC sheets for top rail, lock rail and bottom rail on either side, and 15mm (5mm x 3) thick, 20mm wide cross PVC sheet as gap insert for top rail and bottom rail. Paneling of 10 mm thick prelam PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles and rails with 30mm wide x 5mm thick PVC sheet beading on either side, and joined together with solvent cement adhesive etc. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the C Channel using PVC solvent cement adhesive. including stainless steel fixtures and fastening Complete as per direction of Engineerincharge, manufacturer\"s specification and drawing |
| 28 | Item No.28:-Providing and fixing mild steel grill work for windows, ventilators weighing 15.00 kg per Sq.M. as per drawing, including necessary fixtures, welding and painting with one coat of anti-corrosive paint etc. complete. |
| 29 | ItemNo.29 :-Providing and fixing 1st class white glazed earthenware Orissa Type W.C. Pan 580 mm dia including P or Strap cast iron soil and vent pipe upto the outside face of the wall (1:5:1 0) cement concrete bedding 15 mmthick, 10 liter P.V.C. flushing cistern with all necessary pipe connection etc. complete |
| 30 | ItemNo.30:- Providing and fixing European type coloured glazed (as per IS Std.) earthenware water closet pan with Bekelite seat and lid with chromium plated brass hinges and rubber buffers including UPVC soil and vent pipe upto the outside face of wall, 10 litre UPVC low level tank flushing cistern, 32 mm. dia. UPVC flush pipe with fittings, and clamps 20 mm dia. UPVC over flow pipe with mosquito proof couplings, pointing to exposed pipe and cutting and making good to the wall and floor testing etc. complete. (Prior approval of sample and brand by Ex. Engineer is necessary before use.) |
| 31 | ItemNo.31:- Providing andfixing White GlazedEarthenware full stall type Urinal withP.V.C. flushing cistern of 5 liters capacity with fitting, inlet pipes and stop tap, brackets for fixing the cistern, 32 mm dia. P.V.C flush pipe with fittings and flushing arrangement including lead soil pipe, lead trap, soil pipe connectionup to the outside face of the wall |
| 32 | Item No 32:-Providing and fixing White glazed with bottle trap earthenware Wash Hand Basin of 55x40 cm.size including cold water piller taps, brackets, rubber plugs and brass chain, stop tap, chromium plate bottle trap and necessary pipe connections including UPVC waste pipe and trap upto the outside face of the wall, making good the damaged surface, testing etc. complete. (D.S.R. I/P= 27(a)/93) R.A.No.21 Specification No.Bd-V-30/Page 565 |
| 33 | Item No. 33:- Providing and laying on walls / ceiling / floors 15 mm diameter approved Medium type. Galvanized Iron pipe having embossed at every meter the ISI mark and name of manufacturer, having 15 mm outer diameter and 1.27 kilogramme per metre weight with screwed sockets, joints, and necessary galvanized iron fittings such as backnuts, elbows, bends, tees, reducers, enlargers, plugs, etc. including necessary drilling in holes in walls/slabs etc. and remaking good the demolished portion to restore the same in original condition neatly and applying primer and two coats of oil painting including necessary scaffolding including removing existing pipe if necessary & conveying & stacking in P.W.D.. chowky or as directed etc. complete. (D.S.R.I/P=2a)/84) Specification No. Bd-V-5/Page-551a)15 mm dia. |
| 34 | c)25 mm dia. |
| 35 | Item No.34:- Providing and fixingscrew down bib/stop tap of brass of approved quality and make, including necessary sockets, union nut, testing etc. complete.a)15 mm dia. |
| 36 | Item No.35:- Providing and fixing brass half turn 25mm dia steel with cromium plating flushing cock including necessary fitting etc. complete. |
| 37 | Item No.36:- Providing and fixing 10 cm dia. PVC Nahani Trap fixed with PVC grating, PVC plug bend and piece of PVC pipe upto plug bend, scaffolding etc. complete. |
| 38 | Item No.37:- Providing and fixing UPVC, Soil vent / waste SWR pipe conforming to I.S. - 13592, and I.S. - 4985 to withstand continous internal hydraulic pressure of 4 kg/cm2 including necessary fittings, such as bends, tees, single junctions, double junctions and joining with rubber rings and lubricants, over mild steel bracket m.s. flat of 40mm.wide and 3mm. thick on walls or laying in ground including necessary excavation, laying, refilling the trench testing etc. complete. A) 75 mm diameter waste water pipe |
| 39 | B) 110 mm diameter soil pipe |
| 40 | Item No.38:- Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm With R.C.C. raft in B.C. soilarea including cost of reinforcement, 1:2:4 cement concrete channels half round G.S.W. pipes, BrickMasonry, plastering from inside and airtight 75 mm thick R.C.C. cover medium duty 100Kilogrametc.complete. |
| 41 | Item No.39:- Providing soak pit of size 120 x 120 x 120 cm including excavating and filling with brick bats. charcoal as per drawing etc. complete. |
| 42 | Item No.40- Providing and fixing 450 x 550 mm size superior type Belgium mirror with 16mm dia. nickel plated towel rod etc. complete. |
| 43 | Item No.41- Providing and fixing H.D.P container one piece moulded water tank made out oflowdensitypolythylerand builtcorrugationincludingofdeliveryuptodestination hoisting andfixing of accessories such as inlet,outlet overflow of alltanks capacityabove 1000 to 20,000 litres |
| 44 | Item No.42:- Providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surfaces in two coats including scaffolding, preparing the surface. (excluding the primer coat) etc. complete. |
| 45 | Item No.43:-Providing and applying two coats of textured synthetic paint of approved shade and quality and one coat ofprimer before applying textured paint including scaffolding if necessary preparing surface by thoroughlycleaning oil, grease, dirt and other materials as required, etc. complete. |
| 46 | Item No.44:- Providing and fixing heavy duty inter locking concrete Coloured paving blocks of 60 mm thickness of having a strength of 300 Kilogram/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete |
| 47 | Item No.45:-Providing and fixing mild steel grill gate with angle iron frame 65mm x 65mm x 10mm with iron bars at 150mm C/C and diagonal flats as per the detailed drawing including hinges, pivot block locking arrangement, welding riveting and oil painting of three coats of approved shade Weight of gate 35 Kilogram/Smt. |
| 48 | Item No.46:-Providing and fixing 25 mm thick marble tablet of size and description as per detailed drawings inclduing engraving the description,filling the lead, moulded marble 1:2 cement mortar border etc.complete |
| 49 | Item No.47:-Quality Control Testing Rate For brick water Absorption(set of 5 brick),Compresive Strength, ( set of5 bricks), Efflorscence (set of 5 bricks) |
| 50 | Item No.48:- Quality Control Testing Rate Forcompressive strength c.c. cube (Set 3 cubes) |
| 51 | Item No.49:- Standard Consistancy, Fineness, Specific Gravity, Setting Time ( Initial & Final ), Compressive Strength, Soundness. |
| 52 | Item No.50:- Water Absorption test for aggregate. |
| 53 | Item No.51:- Above 16 mm (Set of 3 Bars) (Tensile strength, %, Elongation, Yield Stress,Weight-Per Meter, Bend / Rebend Test, Proof Stress.) |
| 54 | Item No 52:- Reimbrsement of royalty charges if contractor provides orignal royalty challan from revenue department. |
| 55 | Add 3% For Electrification andpremises Light |
| 56 | Add 12 % For GST |
| 57 | Add 0.5% For Insurance |
AI Tender Summary
Tender Timeline
Jul 20, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedJul 25, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 26, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender