Military Engineer Services-MES has published Repair Maintenance Of Road Side Street Lights Perimeter Security Lights Junction Box High Mast Lights And Connected Cable At Tanda Area Under Ge North Akhnoor. Submission Date for this Tender is 17-08-2022. Road Work Tenders in akhnoor Jammu And Kashmir. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 25-Jul-2022 | Amendment | Other | 10-08-2022 |
2 | 10-Aug-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 17-08-2022 |
Sl. No. | Item Description |
1 | Taking down old unsvstreet lights and M&L for LED street light fitting of capacity 60watt ( 5700 K)with high performance LED, Contemporary designed housing made of die cast aluminium with street optic lens for uniform light distribution rated IP 66 all as specified and directed. Make WiproCat part NoLR02-671-XXX-57-G2or equivalent in make ofphillips, ,Oshram, GE |
2 | Takng down old unsvstreet lights and M&L for LED street light fitting of capacity 90 watt ( 5700 K)with high performance LED, Contemporary designed housing made of die cast aluminium with street optic lens for uniform light distribution rated IP 66 all as specified and directed. Make WiproCat part NoLR02-102-XXX-57-G2or equivalent in make ofphillips, ,Oshram,GE |
3 | Takng down old unsvstreet lights and M&L for LED street light fitting of capacity 40 watt ( 5700 K)with high performance LED, Contemporary designed housing made of die cast aluminium with street optic lens for uniform light distribution rated IP 66 all as specified and directed. Make WiproCat part NoLR02-451-XXX-57-G1or equivalent in make ofphillips, ,Oshram,GE |
4 | Taking down old unsvstreet lights and M&L for LED street light fitting of capacity 25 watt ( 5700 K)with high performance LED, Contemporary designed housing made of die cast aluminium with street optic lens for uniform light distribution rated IP 66 all as specified and directed. Make WiproCat part NoLR02-291-XXX-57-XXor equivalent in make ofphillips, ,Oshram,GE |
5 | Taking down old/unsv flood lights from high mast light of any type and M&L for LED flood light of capacity 250 watt IP 66 Lumainire with aluminium die cast housing toughened glass and unique lens system for enhancement illuminationcomplete with all accessories Make Wiprocat part No LF3 -342-060-57XXor equivalent in specification of make phillips, Oshram,GE |
6 | Supply and fixing street light bracket for street light fittings made to shape as directed out of G.I. pipe light grade 32mm bore 1.5 mr long including fixing of light fittings and bracket with MS clamps, nuts and bolts of appropriate size complete all as specified and directed. |
7 | M&L for flat aluminium cablesize 2.5 sqmm x 2 core required for street light connection all as specified and directed Make Havells, finolex, Anchor (Taking down burnt cable of any size). |
8 | Supply , installation in replacement, connecting electrically and testing of street light junction box size 450x250x300mm,pole mounted made out of CRCA sheet 2 mm thick , powder coated having door with magnetic lockcomplete withbus bar 4 Nos suitable for 3 phase 4 wire supply system, made of alumn strip of size 20X3mm, one single pole 240 volts "C" Curve type 6 Amps withrupturing cap 10 KA, including fixing arrangement made of MS Clamps of requisite size nuts, bolts and washers complete, all as specified and directed by Engineer in Charge Make DVEPL, Electrifield, Siemen. |
9 | Taking down old/burnt cable of any size and Supply and fixingAerial bunched cable (AB) LT of size 3 core- x16 sqmm+1-core x 16sqmm+ 1x25 sqmmfor street lights .The 16 sq.mm. phase conductor shall be of aluminium solid round; outer diameter shall be within the limits.• The phase conductor shall be insulated with black weather resistant high-densitypolyethylene (HDPE) suitable to 1100 V insulation. The insulated conductors shall generally conform to the relevant standards.• Conductors: The properties of the aluminium wires before stranding shall be:• Tensile strength not less than 90 N/Sq.mm.• Resistivity at 20 Deg. C not exceeding 0.02845ohm / Sq.mm / m(V) and one bare messenger wire shall be stranded non compacted circular aluminium alloy conductor .all as specified and directed. Make Havells, Gloster,Polycab,KEI Note:- The following hardware fittings and accessories shall be used to install,erect and join the AB cable (i) Suspension clamp with eye hook (ii) Suspension fittings and corresponding eye hook (iii) Dead eye fittinngs (iv) Nylon Tie (v) connectors |
10 | Material and labour for Earthing complete with galvanised steel earth plate electrode 600mm x 600mm x 6mm thick buried directely in ground vertically ( earth pit not less than 2.25 meters deep below ground level) with top edge of plate not less than 1.5 metres belowground level, connected to and including galvanised iron wire 4 mm dia and light grade protection pipeof 15 mm diafrom earth electrode up to test point or up to 7.5mtr whichever is less by means of GIbolts, nuts, check nuts and washersall as per electrical plate No 3 of SSR Pt-I and GI watering pipe of 20 mm dia medium grade,GI funnel with wire mesh,including charcoal, salt packed all around the earth electrode plate in layers, PCC earth pit chamber 1:3:6 type C1, of size 45cm x 45cm x 45 cm,RCC cover 1:2:4 type B1 of size 45x45x6 cm, excavation/earth work in any strata and returning filling, removal of surplus soil and testing/test point for required valueincluding removing old item completeall as specified and directed.Note:-The required resistance of Earthing shall be less than 3 ohm, If not found to the required resisstance, the contractor has to re earthingfor required resistance andthe cost for the same included in the quoted rate and no extra shall be paid on failure of getting required resistance. |
11 | Supplylaying and testingXLPE Insulatedarmoured heavy duty electric cable with aluminium conductor 1100 volts grade, cross sectional area 25 sqmm 3.5 core all as specified and directed.Make Polycab,Gloster,Grandlay |
12 | Supplylaying and testingXLPE Insulatedarmoured heavy duty electric cable with aluminium conductor 1100 volts grade, cross sectional area 16 sqmm 4 core all as specified and directed. Make Polycab,Gloster,Grandlay |
13 | S & F GI pipe light grade 50 mm bore for cable protection fixed on poles or laid in trenches under floor, ducts etc with fixing clamps, nuts , bolts etc. all as specified. |
14 | Excavation in tranches not exceeding1.5 m wideand not exceeding 1.5 m deep for foundationof laying cable including gettingout in soft/loosesoil complete all as specified and directed. |
15 | Returning filling in including spreadingwateringand well ramming in layers not exc25cmcomplete all as specifed . |
16 | Removing surplus soilto distance not exceeding50 m and depositing where directed at a level notexceeding 1.5 m above the starting pointcomplete all asspecifiedand directed . |
17 | M & L for protection to cable with one layer of brick laid flat across the cable using all size sub class "B" Bricks. |
18 | Sand cushioning to under ground electric cables including watering and consolidation all as per clause 19.75 of SSR Part-I |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail