|
| 1 | Earth work in excavation in foundation by manual means over areas(exceeding 30 cm in depth and up to 1.50m depth 1.50 m in width as well as 10 sqm on plan ) , including disposal of excavated earth upto I metre for cutting of edges ,disposal earth to be leveled and neatly dressed.All kinds of soil. |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All works up to plinth level in M-7.5(1:4:8) grade, with 40mm nominal size of (crushed stone aggregates). |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.All works upto plinth level in M-10(1:3:6) grade, with 20mm nominal size of crushed stone aggregates with20% Boulders |
| 4 | Providing and layingof damp proof course of 40 mm thick with cement concrete (1:2:4),mix with 12.50 mm thick crushed stone aggregates. |
| 5 | Centering and shuttering including shuttering propping and removal of form for foundation. |
| 6 | Brick work with F.P.S bricks of class designation 75 in 1:6 (cement: sand) mortar. |
| 7 | Half brick masonary with class designation 75 in foundation and plinth in 1:4 mixincluding extra over half brick masonary in superstructurs. |
| 8 | Providing and laying in position cement concrete of specified grade of reinforced cement concrete, excluding the cost of centering and shuttering. in M-20(1:1.5:3) grade, with 20mm nominal size of crushed stone aggregates. |
| 9 | Reinforcement of R.C.C work in slab,beams,lintel band, sunshades including cutting,bending,placing in position and binding all complete. |
| 10 | Providing form work for slab base, beams and lintel band including strutting, propping and removal of form. |
| 11 | Providing form work for slab base, beams and lintel band including strutting, propping and removal of form.Edges of slab(under 20 cms wide) |
| 12 | Steel work welded in built up section/framed works including cutting,hoising,fixing in position and applying a primer coat of approved steel primer using structural steel primer as required for doors and windows frames. |
| 13 | Cement plaster in 1:6 ( 1 cement:6 fine sand ) ,15 mm thick. |
| 14 | 12 mm thick plaster in 1:4 ,Mix. |
| 15 | Providing and fixing paneled or paneled or glazed shutters for doors and windows and clestory windows including ISI marked black enameled M.S butt hinges with necessary screws, including paneling which will be paid separately.(35 mm thick of second classKailwood). |
| 16 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40mm thick Particle Board 12mm thickPlain particle board flat pressed, 3 layer or graded wood particle board medium density Grade I, IS : 3087 marked |
| 17 | Cement concrete flooring in (1:2:4), finishing with a floating coat of cement slurry, but excl. the cost of nosing of steps etc. complete.50mm thick. |
| 18 | Providing fixing and incorporating glass strips nominal size of 35 mm x 4 mm) under flooring. |
| 19 | Painting of doors and windows with ready mixed synthetic enamel paint of approved brand and manufacture in all shades. |
| 20 | White washing with lime to give an even shade on New Work (three or more coats) |
| 21 | Providing and fixing water closet squatting pan (Indian type W.C. pan)with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C.flushing cistern, including flush pipe (of approved make) with manuallycontrolled device (handle lever) conforming to IS: 7231, with all fittingsand fixtures complete, including cutting and making good the walls andfloors wherever required. |
| 22 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265mm sizesrespectively |
| 23 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever requiredWhite Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar taps |
| 24 | Providing and fixing P.V.C. waste pipe for sink or wash basin includingP.V.C waste fittings complete |
| 25 | Providing and fixing 100 mm sand cast iron grating for gully trap. |
| 26 | Providing and fixing bend of required degree with access door, insertionrubber washer 3 mm thick, bolts and nuts complete: Sand cast iron S and S as per IS:1729 |
| 27 | Providing and placing on terrace (at all floor levels) polyethylene waterstorage tank ISI : 12701 marked, with cover and suitable lockingarrangement and making necessary holes for inlet, outlet and overflowpipes but without fittings and the base support for tank |
| 28 | Providing and fixing C.P. brass angle valve for basin mixerand gyser points of approved make conforming to IS : 8931 (15 mm nominal bore) |
| 29 | Providing and fixing 15 mm nominal bore C.P. brass bibcock ofapproved quality conforming to IS : 8931 |
| 30 | Providing and fixing G.I pipe complete with G.I fitting |
| 31 | Providing and fixing G.I. pipes complete with G.I. fittings excludingtrenching and refilling etc. (external work) |
| 32 | providing and fixing collar 100 mm sand cast iron S&S pipes as per IS:1730 |
| 33 | Electric wiring with 1.5 sqmm copper cable including 20 mm dia, 2 mm thick PVC pipe, 5 Amp switch, sunken box and connection to the main pole complete as directed by engineer in charge |
| 34 | Carriage of Sand by mechanical transport including loading , unloading & stacking complete lead upto 150km and Manual labour average lead of 500 mtr |
| 35 | Carriage ofstone aggregate below 40 mm thick by mechanical transport including loading, unloading & stacking complete lead upto 40 km and Manual labour average lead of 500 mtr |
| 36 | Carriage of bricks by mechanical transport including loading , unloading & stacking complete lead upto 150 km and Manual labour average lead of 500 mtr |
