}

Construction Of Toilet Block At Water Sports Center Pul Doda Under Bhadarwah Development Authority, bhaderwah-Jammu And Kashmir

Bhaderwah Development Authority has published Construction Of Toilet Block At Water Sports Center Pul Doda Under Bhadarwah Development Authority. Submission Date for this Tender is 02-08-2022. Toilet Bathroom Tenders in bhaderwah Jammu And Kashmir. Bidders can get complete Tender details and download the document.




Tender Notice

33152249
Construction Of Toilet Block At Water Sports Center Pul Doda Under Bhadarwah Development Authority
Open Tender
Indian
Jammu And Kashmir
bhaderwah
02-08-2022

Tender Details

Construction Of Toilet Block At Water Sports Center Pul Doda Under Bhadarwah Development Authority

Key Value

Document Fees
INR 1000 /-
EMD
INR 19420.0 /-
Tender Value
INR 9.71 Lakhs /-

BOQ Items

Name of Work: Construction of ToiletBlock atWaterSportsCenter PulDoda under Bhadarwah DevelopmentAuthority(Adv. Cost: 9.71 lacs)
Sl. No. Item Description
1Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. 2.6.1 All kinds of soil :
2Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth asdirected in all kinds ofsoil
3Providing and laying in position cement concrete1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:
4Random Rubble masonry with Cement mortar 1:6 (1 Cement : 6 coarse sand) hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete
5Brick workCement mortar 1:6 ( 1 cement : 6 coarse sand)with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing andExtra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level
6Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately) using 2nd class kail wood .
7Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 5.3.1 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)
8Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platforms.
9Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.
10Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately) using 2ndclasskailwood.
11Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick using2ndclasskail wood.
12Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.
1312mm Cement plaster of mix: 1: 6 ( 1 cement : 6 fine sand)
14Cement concrete flooring 1:2:4 (1cement: 2coarse sand4 graded stoneaggregate)50 mm thick with 20mm nominal size stone aggregate.
15Providing and laying vitrified floor 600x 600 mm tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete.
16Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
17Providing and applying 1 mm thick white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
18Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm)
19Finishing with Deluxe multi surface paint system for interiors and exteriors Two or more coats applied @ 1.25 liter/10sqm over and including one coat of special primer applied @ 0.75liter /10sqmusing primer as per manufacturers’ specifications:
20Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.
21Providing and fixing W.C. pan with ISI marked white solid plastic seat and lid.white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required
22Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer
23Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.
24Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge.
25Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan.
26Providing and fixing 40 mm dia P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete:
27Providing and fixing Rectangular shape 1500x450 mm mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing
28Providing and fixingCP brass toilet paper holder
29Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour: Waste coupling 38mm of 83 mm length and 77 mm breadth weighing not less than 60gms.
30Providing and fixing 600 mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than 190 gmPTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour:
31Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour, weighing not less than 300 gms.
32Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106gms.
33Providing and fixing 100 mm sand cast iron grating for gully trap.
34Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.
35Providing and fixing C.P. Brass extension nipple (size5mmx50mm) of approved make and quality as per direction of Engineer-incharge
36Providing and fixing 15mm diaG.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.:
37Providing and fixing 20mm diaG.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.:
38Providing and fixing 15 mmG.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work)
39Providing andfixing of PVC pipesofsuperiorquality 100 mm
40Providing andfixing of PVC pipesofsuperiorquality 150 mm
41Providign and f ixing ofPVC bendofsuperiorauality 80 mmto150 mm
42Providing and lacingon terrace (atallfloor levels)polyethylenewaterstorgaetankISI marked.
43Wiringfor light point/fanpoint/exhuastfan point/callbellpointwith1.5 sqmm FRLSPVC insulatedcopper conductorsinglecore cable in surface/recessedsteelconduit,withpianotype switch, pheno lic laminatedsheets, suitablesizeMSbboxandearthingthe ointwith 1.5 sq. mm FRLSPVCinsulated copperconductorsinglecorecableetc as required.
44Providing andcommissioningofExhuastfan 1ftdia) Bajaj/cromptonmake
45Providing andfixing of concelead lights
46Providing andfixing ofelctricbulbs
47Supplying andfixingmoudulessockets on existing moudularstate.etc3 pin 5/6A socket)
48Providing andfixing ofwaterpump 0.75HP sharp/Havels/crompton/ kalsi
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail