}

Construction Of Holiday Home For Central Government Employees At Cgo Complex, Poonkulam.Sh: Providing Kitchen Equipments.-Sub Head-I: Kitchen Equipments 1.1 Supplying , Fixing, Testing And Commissioning Custom Made Masala Table Of Size Not Less Tha, Poonkulam-Kerala

Central Public Works Department-CPWD has published Construction Of Holiday Home For Central Government Employees At Cgo Complex, Poonkulam.Sh: Providing Kitchen Equipments.-Sub Head-I: Kitchen Equipments 1.1 Supplying , Fixing, Testing And Commissioning Custom Made Masala Table Of Size Not Less Tha. Submission Date for this Tender is 26-07-2022. Kitchen Equipment Tenders in Poonkulam Kerala. Bidders can get complete Tender details and download the document.




Tender Notice

33151775
Construction Of Holiday Home For Central Government Employees At Cgo Complex, Poonkulam.Sh: Providing Kitchen Equipments.-Sub Head-I: Kitchen Equipments 1.1 Supplying , Fixing, Testing And Commissioning Custom Made Masala Table Of Size Not Less Tha
Open Tender
Indian
Kerala
Poonkulam
26-07-2022

Tender Details

Construction Of Holiday Home For Central Government Employees At Cgo Complex, Poonkulam.Sh: Providing Kitchen Equipments.-Sub Head-I: Kitchen Equipments 1.1 Supplying , Fixing, Testing And Commissioning Custom Made Masala Table Of Size Not Less Than 600 Mm ( L ) X 600 Mm ( W ) And Approximate Height ( 850Mm+150Mm ) Fabricated Using 16 Gauge Ss 304 Food Grade Stainless Steel Atop On 25Mm X 25Mmx 3Mm Thick Size Or Higher Stainless Steel Welded Angle Frame Work, 4 Number 25Mm Dia. Stainless Steel Pods With Adjustable Bullet Feet And 2 Number Under Shelves Fully Covered With 18Swg Ss 304 Stainless Steel Sheet Complete With Approval From The Engineer-In-Charge Prior To Fabrication Etc. Required. Back Splash Shall Be Fabricated Using 20Swg Ss304 Stainless Steel For 150Mm Height. 1.2 Supplying, Fixing, Testing And Commissioning Custom Fabricated Island Exhaust Hood Having A Size Of Not Less Than 1800 Mm ( L ) X 1600 Mm ( W ) And Height Of 600 Mm Made Of Ss 304 Stainless Steel Complete As Per The Drawings Approved By The Engineer-In-Charge As Required. External And Internal Parts Of The Hood To Be Manufactured Using Ss 304 Stainless Steel Of 18 Swg Thickness In A Welded Body Construction, Removable 18 Swg Thick Stainless Steel “V Section Measuring 510 Mm X 510 Mm X Mm Thick, In Full Length With Bottom Filters Set Continuous Channel, Grease Gutter On Rear And Side Each Piece, Appropriate Number Of Flushed -Heat Toughened Glass Led Lights With Diffusing Glass Etc. To Provide 600 Lux Of Light Output Throughout The Hood. Wiring Shall Be Done Using Heat Resistant Conduits And Frls Wires Of Not Less Than 1.5 Sq.Mm, Controllable Fresh Air Grill ( Full Length ) To Supplied From The Front Or Bottom As Per Site Requirements Etc. Complete With Suspending The Unit From Ceiling With Hanger Rods Of Suitable Size And Length Complete As Required.Burner Indian Cooking Range1.4 Supplying , Fixing, Testing And Commissioning Of Custom Fabricated Utility Sink With Stand Having A Size Not Less Than 600 Mm ( L ) X 600 Mm ( W ) And Approximate Height Of ( 850+150 ) Mm Made Of Ss 304 Stainless Steel Complete As Per The Drawings Approved By Engineer-In-Charge As Required. Top Surface Shall Be Made Using 16Swg Ss304 Stainless Steel Finish. Sink Shall Be Of Of 600Mm X 600Mm X 300Mm Ss304 Grade Stainless Steel With 1.25” Drain Coupling. Back Splash Shall Be Fabricated Using

Key Value

Document Fees
Refer document
EMD
INR 30638.0 /-
Tender Value
INR 15.31 Lakhs /-
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail