Providing Alternate Disposal Arrange For Disposal Treated Effluent Under Ugss Thanjavur District Orathanadu Town Panchayat Providing Alternate Disposal Arrange For Disposal Treated Effluent Under Ugss
Tender Value
19.85 Lakhs
Estimated cost
Bid Submission
26 Jul 2022
0 days left
EMD
19850
Bank guarantee accepted
Document Fee
6720
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
orathanadu → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Providing Alternate Disposal Arrange For Disposal Treated Effluent Under Ugss Thanjavur District Orathanadu Town Panchayat Providing Alternate Disposal Arrange For Disposal Treated Effluent Under Ugss
BOQ
| Sl. No. | Item Description |
| 1 | Earth work excavation in all classes of soils such as hard stiff clay, stiff black cotton, hard red earth, shales, murram, ordinary earth, earth mix with 50% fair sized boulders etc., with initial lead and lifts including laying, spreading, leveling, sectioning breaking clods etc., includingall incidental charges etc., complete as per standard specification . for FoundationsSS 20B TNBP NO. 23 &24 V, VI (S2) VI 9 First depth of 2 m 9(3.14x0.25x0.33x0.33) |
| 2 | Second depth of 1 m |
| 3 | Third depth of 1 m |
| 4 | Supplying and Fillingin foundation and basement with Filling Sand in layers of not more than 15cm thick well rammed,watered consolidated including cost and conveyance of materials and labour charges etc., complete as per Standard Specification and as directed by departmental Engineers(TNBP No.24&25). |
| 5 | PlainCement Concrete 1:4:8 mix (One Cement, Four part Sand and Eight partCoarse Aggregate) Using 40mm ISS HBG metal for foundation and basement including dewatering if found necessary and laid in layer of not more than 15cm thick and consolidated including all cost conveyance of materials and labour charges etc. complete as per standard specifications and as directed by departmental Engineers (TNBP No.28). |
| 6 | Supplying & Erecting of steel centering for sides & soffiots including necessary supports & strutting upto 3.29m height for plane surfaces in all floors with all cross bracings using mild steel sheets of size 90 x 60cm & 10 gauge stiffened, welded with steel angle of size 25 x 25 x 3mm for boarding laid over silver oak joists(Country wood) of size 10 x 6.5cm spaced @ about 90cm c/c and supported by casurina props of 10 - 13cm dia. spaced @ 75cm c/c etc., complete complying with standard specifications and as directed by the departmental officers. Rate for 10m2.for the following items.(RCC floor slab, roof slab, Rectangular/ square, Tee/ Ell beams, Lintels, staircase waist slabs, Landing slabs, Landing beam, Portico beam etc., ).TNBP NO.86 K, 86 A Curved surface (From base slab 0 to 3.30m above GL) |
| 7 | Vibrated Reinforced Cement concrete 1:1 1/2:3 (One part cement, one and half partsand and Three part aggregate) using machine crushed 20mm gauge hard broken stone jelly for all RCC items of work excluding centering strutting, and reinforcement grills placed in position but including mixing concrete, laying and vibrations charges, curing, etc complete and including providing fixtures like fan clamps in the RCC floor or roof slabs wherever necessary etc. complete complying with standard specification( TNBP No:30)Below GL Upto 1.5 m |
| 8 | Above G.L |
| 9 | From 1.5 m to 4.5 m |
| 10 | Supplying, fabricating and placing in position mild steel or ribbed tor steel for all reinforced cement concrete works as per design given including cost of steel and binding wire with all conveyance and lead charges in all floors etc.complete complyingwith standard specifications and as directed by the deparmental engineers. TNBP No:30 |
| 11 | Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris, putty, wherever required etc., complete complying with standard specification. |
| 12 | Refilling the outside of the well with excavated earth (other then sand) complying with standard specification for filling the foundation including watering consolidation etc., complete as directed by the TWAD Board Officers. |
| 13 | Supplying and fixing of encapsulatedP.V.C. steps inside the well including other incidential and operational charges etc. |
| 14 | Earthwork excavating and depositing on bank with an initial lead of 10 metres and initial lift of 2 metres in Hard stiff clay, stiff black cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders SS 20B for laying of pipe line works having bed width of 1.25m and below on linear measurement basis and as directed by TWAd Board Officers |
| 15 | Supply and Delivery of6KSC 200 MM DiaPVC pipes as per IS 4985/2000including cost of transportation charges to stockyard anywhere in Tamilnadu but excluding cost of Unloading, stacking at stock yard and Conveyance from stock yard to site. GST extra applicable as per GO |
| 16 | Lowering of 200mm 6KSC PVC pipesand specials in the trenches and laying to proper grade and alignment and as directed by the TWAD Officers. |
| 17 | Testing ofP.V.C.pipes with hydraulic testing equipment by filling with water (including cost of water @ Rs. 60/KL) and testing to recommended pressure in convenient stretchesand attending thebursts if any occured during the test, excluding the cost of pipes but including other incidential and operational charges etc., complete for the following diametres of pipes. |
| 18 | Refillingwith excavated earth (other than sand) complying with standard specifications for filling the foundationsincluding watering & consolidation etc. complete as directed by TWAD Board Officers. |
| 19 | Supply and Delivery ofPVC Specials including other incidential and operational charges etc. |
| 20 | Supply and delivery of Open well Submersible pump set conforming to IS 14220 /2002 and as amended thereafter and BEE 3 Star Rated capable of discharging 300lpm x 20m head -1HP. The pump shall be with stainless steel shaft and dynamically balanced bronze mixed type impeller, CI FG 200 grade casing and brass screws and rotor shall be of copper rod as per IS 613/1984 with ISI mark. The pump suitable for installation in sump with 1.1KV grade 3 core suitable copper flat submersible cable to a length of 15m with necessary cable joints. The non-return valve located at the top of the pump in the discharge outlet connection is to be designed with minimum friction.The pump should be directly coupled to 2880 RPM, three phase, 50 Hz (±5), 415V+6% & 415V-15% squirrel cage induction motor suitable forDOL upto 5 HP, Fully AutomaticAir break Star Delta up to 20 HP and Auto Transformer starter for above 20 HPstarting and for continuous operation. |
| 21 | Supply and delivery of direct online starter confirming to IS13947 and IEC 947 suitable KW rating for operation in AC/single Phase/50HZ(± 5%) and 415 V(±10%) including Ammeter, Voltmeter, Thermal Overload relay, 16 Amps2 pole Magnetic Contactor withunder Voltage protection, Indication lamp, starting capacitor, running capacitor and On/Off Push button switches, 5 way connector, wiring with 1 sq. mm/1.5 sq. mm copper PVC insulated cable, powder coated vermin proof box including the capacitor (the cost of capacitor is to be taken separately). |
| 22 | Supply and delivery of 1.1 KV grade 3 core PVC insulated 2.5 sq.mm copper flat submersible cable as per IS 694/1990 and with ISI marking of reputed make for submersible motor erected in the bore well. |
| 23 | Supply and delivery of GI pipes and specials as per relevant IS specification for Bore well listed below inserting GI Pipe pipe in wall, cement patch up etc, and as per drawing enclosed including cutting and threading of pipes. 150 mm GI Pipe |
| 24 | Cutting of 150 mm GI pipe |
| 25 | Threading of 1505 mm GI pipe |
| 26 | 150 mm GI Elbow |
| 27 | 150 mm GI flange set ( Heavy ) |
| 28 | 150 mm GM Gate Valve valve |
| 29 | 150mm x 125 mm GI Reducer |
| 30 | 125mm x 110 mm PVC Threaded Coupler |
| 31 | Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days. |
AI Tender Summary
Tender Timeline
Jul 18, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedJul 26, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 27, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender