Construction Of A Community Toilet With Connecting Road At Sub Marketyard Katwa Under Purba Bardhaman Zilla Regulated Market Committee Under Rkvy 2011-12
Tender Value
15.98 Lakhs
Estimated cost
Bid Submission
08 Aug 2022
0 days left
EMD
31977
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
katwa → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of A Community Toilet With Connecting Road At Sub Marketyard Katwa Under Purba Bardhaman Zilla Regulated Market Committee Under Rkvy 2011-12
BOQ
| Sl. No. | Item Description |
| 1 | Toilet Block |
| 2 | Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. (a) Depth of excavation not exceeding1500 mm |
| 3 | Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand (payment to be made on measurement of finished quantity) (B) Do - by fine sand |
| 4 | Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches. |
| 5 | Cement concrete with graded stone ballast (40 mm.size) excluding shuttering.(A) With Pakur Verity(a)6:3:1 proportion |
| 6 | Ordinary Cement Concrete [ Mix 3 : 1.5 : 1 ] Cement concrete with graded stone chips (20 mm.size) excluding shuttering and reinforcement, if any, in ground floor. |
| 7 | Reinforcement for reinforced concrete work in the all sorts of structures including distribution bars, stirrups, binders etc. including supply of rods, initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection complete as per drawing and direction. i) For works in Foundation and upto roof of ground floor / upto 4Mi) Tor steel/Mild Steel I(JSW/JSPL/SHYAM/SRMB/BMASL/ELECROSTEEL/SSL) |
| 8 | Hire and labour charges for shuttering with centreing and necessary staging upto 4 m. using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns, lintels curved or straight including fitting, fixing and striking out after completion of works. (upto roof of ground floor) (c)9 mm to 12 mm thick approved quality ply board shuttering in any concrete worki) i) Ground floor |
| 9 | Brick work with 1st class bricks in cement mortar (6:1) In foundation & plinth |
| 10 | Brick work with 1st class bricks in cementmortar (1:6) b) Super Structure, Ground Floor |
| 11 | 125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor. |
| 12 | in First floor. |
| 13 | M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor.(i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr. 1st Floor |
| 14 | Plaster (to wall, floor, ceiling etc) with sand and cement mortar including rounding off or chamfering corners as directed and racking out joints including throating,nosing and drip course, scaffolding / staging where necessary.Ground Floor : [Excluding cost of chipping over concrete surface]A) With 1:6 cement mortar, 15 mm thick |
| 15 | B) With 1:6 cement mortar, 20 mm thick |
| 16 | C) With 1:4 cement mortar, 10 mm thick |
| 17 | Neat cement punning about 1.5 mm. thick in wall dado, window, sills, floor, drain, etc. |
| 18 | Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer\"s specification and as per direction of the EIC. In Ground Floor: (a) One Coat |
| 19 | Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer\"s specification and as per direction of the EIC. (In Ground Floor) (a) One Coat i) Water based interior grade Acrylic Primer |
| 20 | Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer\"s specification) including cleaning and smoothning of surface. Two Coats |
| 21 | Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer\"s specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost ofprimer. In Ground floor (Two Coat) a) Normal Acrylic Emulsion |
| 22 | Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 23 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc including using of approved putty etc on the surface, if necessary. On steel or other metal surface :With super gloss (hi-gloss) Two Coats (with any shade except white) |
| 24 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide of required to match colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. (A) FloorWith Sand Cement Morter (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 kg/Sq.m & joint filling using white cement slurry @ 0.20 kg/Sq.m(a) Area of each tile upto 0.09 Sq.m ii)Other than Coloured decorative including white |
| 25 | (B) Wal With Sand Cement Morter (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 kg/Sq.m & joint filling using white cement slurry @ 0.20 kg/Sq.m.(a) Area of each tile upto 0.09 Sq.mii)Other than Coloured decorative including white |
| 26 | Supplying, fitting and fixing Marble Slab/tile of 15 to 18 mm thickness in floor, lobby, stair, landing & treads etc. over 20 mm (av.) thck base of Cement mortar (1:2) laid with white cement slurry @ 4.4 kg/Sq.m before placing marble & jointedwith white cement slurry @ 2.0 kg/Sq.m with necessarypigments including grinding and Granite polishing as perdirection of Engineering -in -Charge in Ground Floor. (ii) Area of each Slab/tile exceeding 0.3 sq.m. but notexceeding 0.6 sq.m. |
| 27 | Supplying, fitting and fixing 18 mm thick marble partition slab with chawk doongri marbel square cut, both sides polished with two front corners rounded and edges polished |
| 28 | Artificial stone in floor, dado, staircase etc. with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) & marbel dust in proportion (1:2) including smooth finished & rounding off surface & application of cement slurry before flooring works using cement @1.75 kg/sq.m. all complete including all materials & labour35 mm thk a) Ground floor |
| 29 | Providing and fixing PVC Door Frame of size 50x47mm with a wall thickness of 5mm (± 0.2 mm) made out of single piece extruded PVC profile, with mitred cut joint sand joint with 2 nos. of PVC bracket of size 190 mm x 100 mm long arms of cross section size 35 mm x 15 mm & self driven self taping screws, the vertical door profiles to be reinforced with 40x20mm M.S. rectangular tube of 0.8 mm ,including providing EPDM rubber gasket weather seal throughout the frame,including jointing 5 mm PVC frame strip with PVC solvent cement on the back of the profile. The doorframe to be fixed to the wall using 8 x100mm long anchor fasteners complete, all as per manufacturer?s specification and direction of Engineer -in- charge. |
| 30 | Supplying, Fitting & Fixing 30 mm thick both side prelaminated Factory madesolid Panel PVC Door Shutter consisting of outer frame made out of M.S. tubes of 19 gauge thickness and size 19 mmx19 mm for styles, top and bottom rails, M.S. frame shall have cost of steel primers of approved make and manufacture, M.S. frame covered with 5 mm th. heat moulded PVC “C” channel of size 30 mm th, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on either sides forming styles; and 5 mm th. 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm tapered in 45 degree on the inner side to form top & bottom rail and 115 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top,bottom and lock rails shall be provided either side of the panel with 10 mm (5 mmx2) th.,20 mm wide cross PVC sheet as gap insert for top rail and bottom rail sheet to be fitted in the M.S. frame welded/sealed to the styles &rails with 7 mm (5mm+2 mm) th.x15 mm wide PVC sheet beading on inner side and joined together with solvent cement adhesive. An additional 5 mm th. PVC strip of 20 mm which is to be stuck on the interior side of the “C” channel using PVC solvent adhesive etc. complete excluding all necessary hardwares as per direction of Engineer-in-Charge. |
| 31 | Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals). (d) Sal : Local. In ground floor |
| 32 | Panel shutters of door and window, as per design (each panel consisting of singleplank without joint), including fitting and fixing the same in position but excluding the cost of hinge and other fittings. In ground floor.iv) 25mm thick shutters with 12mm thick panel of size 30 to 45 cm.(c) Other Local Wood.In ground floor |
| 33 | (b) Priming one coat on timber or plastered surface with synthetic oilbound primer of approved quality including smoothening surfaces by sand papering etc. |
| 34 | (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. Including using of approved putty etc. on the surface, if necessary.a) On timber or plastered surface : With super gloss (hi-gloss) -(iv) Two coats (with any shade except white) |
| 35 | Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark. (vii) 100mm. X 58mm. X 1.90mm. |
| 36 | i) Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting. (a) 200mm long |
| 37 | Anodised aliminium D-type handle of approved quality manufactured fromextruded section conforming to I.S. specification (I.S. 230/72) fitted and fixedcomplete: (v) 125 mm grip x 12 mm dia rod. |
| 38 | Supplying, fitting and fixing Fan Hook for ceiling with 1 metre long 16mm. dia rod complete including mending damages. Payment for damage and repair to be made separately. |
| 39 | Collapsible gate with 40mm x 40mm x 6mm Tee as top and bottom guide rail, 20mm x 10mm x 2mm vertical channels 100mm apart in fully stretched position 20mm x 5mm M.S. flats as collapsible bracings properly rivetted and washered including 38mm steel rollers including locking arrangements, fitted and fixed in position with lugs set in cement concrete and including cutting necessary holes, chasing etc. in walls, floors etc. and making good damages complete. |
| 40 | Construction of septic tank of different capacities as per approved drawing with 1st class brick work in cement morter (1:4) including two 560mm dia R.C.C manhole cover (heavy type) of approved make supplied, fitted & fixing In the 100 mm thick R.C.C. the internal surfaces and 15 mm thick cement plaster (1:4) to out side wall upto 200 mm below G.I. floor finished with 25 mm thick grey artifical stone over 100 mm thick R.C.C (1:1.5:3) bottom slab including (1:1.5:3) top slab with necessary fittings, 20 mm thick cement plaster (4:1) with net cement finish to supplying, fitting and fixing all nessary specials, fitting, S.W. tees, C.I. floor rest etc. including excavation earth in all sorts of soil, shoring, bailing out and pumping out water as necessary, ramming, dressing the bed and refilling the sides of the tanks with earth, removing spoils,filling up the chamber with clear water, removing foreign materials from the chamber and including constructing attached inspection pit as per approved drawing and connecting all necessary pipes, joints etc. with internal plaster work and artifical stone flooring is to be done with admixture of water proofing compound @ 0.5% by weight of cement with all costs of labour and materials.(iv) For 50 users. A) With Pakur variety. (SAIL/TATA/RINL). |
| 41 | Construction of circular soak well 2.5 metre deep in all types of sandy soils with dry brick work upto 1.6 metre from the bottom having 150 mm intermediate cement brick work (1:4) band all round and cement brick work (1:4) upto 0.90 metre from top with 20mm thick cement plastering (1:4) to inside face upto the depth of cement brick work, 15mm thick cement plaster (1:4) on outer face from top of the well upto G.L. and 6 mm thick cement plaster (1:4) on top of the R.C.C. cover slab including filling bottom 1.00 metre of inside of the well with brick metal (50 mm to 63 mm size) including R.C.C. cover slab of 100 mm thick with cement conc (1:1.5:3) with stone chips with necessary reinforcement and shuttering including one 560 mm dia. R.C.C. manhole cover (heavy type)of approved make supplied, fitted and fixed in the cover slab with necessary fittings, making nacessary arrangements for pipe connections, excavation of well including shoring, dewatering and removing the exess earth from the premises as per direction complete in all respect with all costs of labour and materials. With 250 mm thick dry brick work and 250mm thick cement brick work (1:6) and 1.00m (SAIL/TATA/RINL) |
| 42 | Constructing Inspection pit of inside measurement 600mm X 600mm X upto 600mm (depth) with 250 mm thick 1st. class brick work in cement mortar (1:4) on all sides, bottom of the pit consisting of 100 mm thick cement concrete (1:3:6) with stone chips over a layer of jhama brick flat soling,15 mm thick (1:4) cement plaster to inside walls and out-side wall upto G.L. and 20 mm.thick (1:4) plaster to bottom of the pit, providing necessary invert with cement concrete (1:3:6) with stone chips as per direction, neat cement finishing to entire internal surfaces, top of the pit covered with 100 mm thick R.C.C. slab (1:1.5:3) with stone chips and necessary reinforcements upto 1% and shuttering including 6 mm thick cement plaster (1:4) in all external surfaces of the slab and one 560 mm dia. R.C.C. manhole cover of approved make supplied, fitted and fixed in the slab with necessary fittings, necessary earthwork in excavation inall sorts of soil, filling sides of the pit with earth and removing spoils after work complete in all respect with all costs of labour and materials. i) With Pakur variety. (SAIL/TATA/RINL) |
| 43 | Shallow water closet Indian pattern(I.P.W.C.) of approved make in white vitreous chinaware supplied ,fitted and fixed in position (excluding cost of concrete for fixing). (i) 580 mm long |
| 44 | Supplying, fitting and fixing E.W.C. in white glazed vitreous chinaware of approved makecomplete in position with necessary bolts,nuts etc. |
| 45 | Supplying, fitting and fixing Flat back urinal (half stall urinal) in whitevitreous chinaware of approved makein position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete.(ii) 470 mm x 280 mm x 340 mm |
| 46 | Supplying, fitting and fixing Squating plate with integral flushing in white vitreous china ware of approved make in cement concrete (6:3:1) with jhama chips complete ( payment of concrete will be paid separately)450 mm x 350 mm) |
| 47 | Supplying,fitting and fixing vitreous china best quality approved make wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint.ii) 550 mm x 400 mm size |
| 48 | Supplying, fitting and fixing 10 liter PVC low down cistern conforming to I.S specification with PVC fittings complete, C.I. brackets including two coats of painting to bracket etc |
| 49 | Supplying, fitting and fixing Peet\"s valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (tested to 21 kg per sq. cm.). (iv) 50 mm dia |
| 50 | Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer (b) 1000 litre capacity |
| 51 | Supplying, fitting and fixing G.I. pipes of TATA make with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) a) For Exposed Work.32 mm dia medium quality |
| 52 | (ii) 25 mm dia. medium quality |
| 53 | b) For concealed work. (ii) 20 mm dia. medium quality |
| 54 | (ii) 15 mm dia. medium quality |
| 55 | Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only).(v) 40 mm dia |
| 56 | Supplying, fitting and fixing bib cock or stop cock.(a) (i) Chromium plated Bib Cock short body (Equivalent to Code No. 511 & Model - Tropical / Sumthing Special of ESSCO or similar brand). |
| 57 | (ii) Chromium plated Bib Cock long body with wall flange with aerator (Equivalent to Code No. 512 & Model - Tropical / Sumthing Special of ESSCO or similar brand) |
| 58 | Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992 and fitted with necessary clamps, nails including making holes in walls etc. and cutting trenches in any soil, through necessary concrete structer etc. if necvessary and mending gooddamages including jointing with jointing matyerials ( Spun yarn, Valamoid/bitumen/M-seal etc). 75 mm dia pipe |
| 59 | ii) 110 mm dia |
| 60 | B/ii) Plain Tee i) 75 mm dia |
| 61 | ii) 110 mm dia |
| 62 | x) Bend 87.5 degree75 mm dia |
| 63 | 110 mm dia |
| 64 | xxi) 110 mm x 110 mm P. Trap |
| 65 | xv) Vent Cowl |
| 66 | Supplying,fitting and fixing 32 mm dia. Flush pipe of approved make with necessary fixing materials and clamps complete. |
| 67 | Anodised aliminium D-type handle of approved quality manufactured from extrude section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete: (b) With round base: (iii) 100 mm grip x 12 mm dia rod. |
| 68 | (d) (i) Chromium plated angular Stop Cock with wall flange (Equivalent to Code No. 5053 & Model - Florentine of Jaquar or similar brand). |
| 69 | Supplying, fitting and fixing pillar cock of approved make.a) (i) CP Pillar Cock - 15 mm. (Equivalent to Code No. 507 & Model -Tropical / Sumthing Special of ESSCO or similar brand). |
| 70 | b) Chromium plated Rose shower with revolving joint and 150 mm long shower arm (Equivalent to Code No. 5489 & Model Florentine of Jaquar or similar brand). |
| 71 | Supplying, fitting and fixing in position C.I. manhole/ pit cover with rim. (a) round (ii) 450 mm X 100 mm X 25 kg (approx.) |
| 72 | Labour for hoisting plastic water storage tank.(i) Upto 1500 litre capacity.(a) Upto 1st story from G.L. |
| 73 | Supplying,fitting and fixing approved brand P.V.C.CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia.iii) 600 mm long |
| 74 | iv) 750 mm long |
| 75 | Supplying,fitting and fixing approved brand 32 mm dia P.V.C.waste pipe, with PVC coupling at one end fitted with necessary clamps. ii) 750 mm long |
| 76 | Supplying, fitting and fixing liquid soap container. |
| 77 | Supplying, fitting and fixing soap holder. |
| 78 | Supplying, fitting and fixing best quality Indian make mirror 5.5 mm thick with silvering as per I.S.I. specifications supported on fibre glass frame of any colour, frame size 550 mm X 400 mm. |
| 79 | Supplying, fitting and fixing towel rail with two brackets.(b) Aluminium(iii) 25 mm dia. and 750 mm long |
| 80 | Concrete Road |
| 81 | Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. (a) Depth of excavation not exceeding1500 mm |
| 82 | Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand (payment to be made on measurement of finished quantity) (B) Do - by fine sand |
| 83 | Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches. |
| 84 | Cement concrete with graded stone ballast (40 mm.size) excluding shuttering.(A) With Pakur Verity(a)6:3:1 proportion |
| 85 | Brick work with 1st class bricks in cement mortar (6:1)In foundation & plinth |
| 86 | Earth work in filling in compound, tank, low land, ditches etc. with good earth, in layers not exceeding 150 mm. including breaking clods and consolidating the same by ramming and dressing complete. (Payment will be made on profile measurement before and after the work) (b) (i) With carried earth arranged by the contractorwithin a radius of 3 km. including cost of carried earth. |
| 87 | Hire and labour charges for Shuttering with or without staging upto 4.0 m height using approved stout props with wooden planks/ply wood/steel sheet plate with required bracing for any kind of plain or reinforced concrete works in all sorts of minor structure including culvert, box culvert, crossdrain etc. The rate is inclusive of fitting, fixing and striking out after completion of work as per specification and direction. b) Where staging is not required. |
| 88 | Ordinary Cement Concrete [ Mix 3 : 1.5 : 1 ] Cement concrete with graded stone chips (20 mm.size) excluding shuttering and reinforcement, if any, in ground floor. |
| 89 | Tube Well |
| 90 | Labour for boring tube well of required dia. by water jet system through any type of soil strata including hire and labour charges for boring pipes, scaffolding, tools and plants as necessary and taking out them and lowering pipes, strainers, blind pipe etc. and fitting and fixing the same complete including bucket washing and other incidental works in the connection. The tube well should have a minimum 50 mm gap in between the outside of the tubewell pipe and the bore. (a) For depth upto 150 metre. (i) 40 mm dia. boring etc. |
| 91 | (iii) 80 mm dia. boring etc. |
| 92 | Supply of PVC pipes & fittings Schedule 80 (medium duty) conformingto ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239(Part - I) (A) PVC Pipes.40 mm dia. |
| 93 | 80 mm dia. |
| 94 | Supplying high density polythene strainer of approved make with adapter conforming to I.S. Specifications. (i) 40 mm dia |
| 95 | Supplying, fitting and fixing steel cutter piece upto 450 mm long with sockets |
| 96 | Supplying, fitting and fixing heavy type bell mouth reducing socket.(i) 50 mm X 100 mm |
| 97 | Supply of galvanised iron socket with I.S.I. Mark.(v) 40 mm dia |
| 98 | Packing the annular space between the outside of the tube well pipes & strainers and the bore with pea size washed gravel of approved quality having size from 2 mm to 5 mm or the size approved by the Engineer-incharge including cost of all materials labour and equipment complete |
| 99 | Washing and developing tube well with air compressor pump and engine for 8 (eight) hours continuous pumping per day with necessary arrangements for testing the yield in gallons per hour with \"V\" notch including hire and labour charges for all tools and plants and scaffolding as required. |
| 100 | Collecting sample of water for bacteriological and chemical test from any depth at any time during execution of work including hire and labour charges for tools and plants and sterilising the equipments, paying all charges and fees, testing etc. complete in all respect as per direction. |
| 101 | Supplying & Installation of submersible pump and motorwith all accessories lowering into the tube well at a depth of 24mtr with 32mm dia column pipe with 3 phase electric connection etc……. Pump capacity 1000 ltr/ hr with a head of 300mtr, 1.0 HP /1.1 KW,( KSB/Calama) As per market rate (CROMPTON) |
| 102 | Supply of motor control panel board suitable for the supplied submerssible pump motor including start-stop bush button ammeter, voltmetre, reset button, conductor, capacitor etc as necessary all complete as per direction. (CG /KSM or approved) |
| 103 | 2.5 Sq mm 3 core PVC insulated 1.1 KV grade flat submerssible cable. (Finolex/Havels) |
| 104 | Installation of pumping machinery along with column pipe by making necessary derrick arrangement including carrying supplied materials to site along with loading, unloading etc all complete. |
| 105 | Providing & fixing Concrete Sign Board as per IRC specification of size 900 x 750 x 37 mm. thick made with RCC 1:1½:3 with pakur variety stone chips reinforced with double layer IRC febric (75 x 75 mm. mesh) and fixed with necessary nuts & bolts on two RC precast posts 100 mm. x 150 mm. of height 2.65 m. of which top 750 mm. is of section 100 x 13 mm. and 1.90 metre above GL & 0.75 metre below GL including digging hole, repacking the same with cement concrete 1:3:6 with jhama khoa or with local stone chips etc. complete including painting two coats on both faces lettering sign marks etc. as per direction of the Engineer-in-Charge. (The rate is inclusive of cost of reinforcement, concrete, shuttering, nuts & bolts, washer etc. complete.) |
| 106 | CGST & SGST @12% |
| 107 | Labour Welfare cess @ 1% |
AI Tender Summary
Tender Timeline
Jul 18, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedAug 08, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 11, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender