supply of Spares For Gtg3 Sii201169 Spares For Gtg3 , Supply Of Stage 1 Bucket Kit Along With All The Required Installation Accessories / Hardware’S; Stage 1 Bucket Kit T.I. Part Number: 3004-1100-1500 Or Equivalent Ge Part Number, Including Installation Hardware Consisting Of Following (But Not Limited To): (I) Seal Pin, T.I. Part Number: 3002-1034-0100 Or Equivalent Ge Part Number (Quantity- 120X); (Ii) Seal Pin, T.I. Part Number: 3002-1035-0100 Or Equivalent Ge Part Number (Quantity- 120X) And (Iii) Twist Lock, T.I. Part Number: 3002-1028-0300 Or Equivalent Ge Part Number (Quantity- 120X). Any Other Item Which Is Required For Installation For 1St Stage Bucket (And Is Not Mentioned Above) Shall Be Supplied Along With Bucket I.E. Supplied Bucket Kit Shall Come Up With All The Hardware Required For Installation. Material Of Construction: Gtd-111 With Suitable Coating As Per Oem Norms. , Supply Of Stage 2 Bucket Kit Along With All The Required Installation Accessories / Hardware’S; Stage 2 Bucket Kit T.I. Part Number: 3004-1101-0600 Or Equivalent Ge Part Number, Including Installation Hardware Consisting Of Following (But Not Limited To): (I) Seal Pin, T.I. Part Number: 3002-1008-0200 Or Equivalent Ge Part Number (Quantity- 90X); And (Ii) Twist Lock, T.I. Part Number: 3002-1028-0400 Or Equivalent Ge Part Number (Quantity- 90X). Any Other Item Which Is Required For Installation For 2Nd Stage Bucket (And Is Not Mentioned Above) Shall Be Supplied Along With Bucket I.E. Supplied Bucket Kit Shall Come Up With All The Hardware Required For Installation. Material Of Construction: In-738 With Suitable Coating As Per Oem Norms. , Supply Of Compressor Rotor Blades Kit For All The Stages Along With All The Required Installation Accessories / Hardware’S; Compressor Rotor Blades Kit T.I. Part Number: 0051-3135-0100 Or Equivalent Ge Part Number. The Rotor Blades Shall Be Ready For Installation And Shall Be Supplied With All The Accessories Required For Installation. Spacer Required For Installation As Per Attached List. Any Other Item Which Is Required For Installation For Compressor Rotor Blades (And Is Not Mentioned Above) Shall Be Supplied Along With Compressor Rotor Blade Kit I.E. Supplied Rotor Blade Kit Shall Come Up With All The Hardware Required For Installation. Material Of Construction For 1St To 8Th Stage Rotor Blades Shall Be Gtd-450 And Balance Stages Rotor Blades Shall Be Aisi 403Cb With Suitable Coating As Per Oem Norms. , Supply Of Compressor Stator Blades Kit For All The Stages Along With All The Required Installation Accessories / Hardware’S; Compressor Stator Blades Kit T.I. Part Number: 0051-3038-2700 Or Equivalent Ge Part Number. Item Group Number: 1301. Detail Supply Of Item As Per T.I. Drawing Number 0051.3038.00P/ Nr: Pl 0051.3038.270 P. Key, Shim And Stator Blade Detail As Per Attached T.I. Drawing Number 0051.3038.00P/ Nr: Pl 0051.3038.270 P. The Stator Blades Shall Be Ready For Installation Including Of All The Accessories Required For Installation. Any Other Item Which Is Required For Installation For Compressor Stator Blades (And Is Not Mentioned Above) Shall Be Supplied Along With Stator Blade Kit I.E. Supplied Stator Blade Kit Shall Come Up With All The Hardware Required For Installation. Material Of Construction For 1St To 8Th Stage Rotor Blades Shall Be C-450 And Balance Stages Rotor Blades Shall Be Aisi 403Cb With Suitable Coating As Per Oem Norms. T.I. Drawing Number 0051.3038.00P/ Nr: Pl 0051.3038.270 P , Supply Of Inner Barrel; Item Number #2; Inner Barrel; T.I. Part Number 3003.1003.020 (Rem. / On Drawing- 3003.1003.000) Or Equivalent Ge Part Number; T.I. Drawing Number: 3003.1035.00P/ Nr: St 3003.1035.060 P; Item Group No: 0804. T.I. Drawing Number: 3003.1035.00P/ Nr: St 3003.1035.060 P , Supply Of Bushing For Inlet Guide Vane; Item Number #5; Bushing; Part Number 3024.1004.020 (Rem. / On Drawing- 3024.1004.000) Or Equivalent Ge Part Number; T.I. Drawing Number: 0050.8054.00P/ Nr: Pl 0050.8054.080 P; Item Group No: 0811. T.I. Drawing Number: 0050.8054.00P/ Nr: Pl 0050.8054.080 P , Supply Of Bushing For Inlet Guide Vane; Item Number #6; Bushing; Part Number 3024.1186.010 (Rem. / On Drawing- 3024.1186.000) Or Equivalent Ge Part Number; T.I. Drawing Number: 0050.8054.00P/ Nr: Pl 0050.8054.080 P; Item Group No: 0811. T.I. Drawing Number: 0050.8054.00P/ Nr: Pl 0050.8054.080 P , Supply Of Bearing Liner Number #1; T.I. Part Number 3029.1107.010 Or Equivalent Ge Part Number; T.I.Drawing Number: 0050.8055.00P/ Nr: Pl 0050.8055.020 P; Item Group Number: 0801. One Set Of Bearing Shall Consists Of Following Items: (I) Item Number #1; Liner Bearing; T.I. Part Number 3029.1107.010; (Rem. / On Drawing- 3029.1107.000) Or Equivalent Ge Part Number; Quantity: 01 Number. (Ii) Item Number #3; Pin; T.I. Part Number 3025.1077.010 (Rem. / On Drawing- 3025.1077.000) Or Equivalent Ge Part Number; Quantity: 01 Number. (Iii) Item Number #6; Dowel Pin; T.I. Part Number 2236.1283.000 Or Equivalent Ge Part Number; Quantity: 01 Number. T.I. Drawing Number 0050.8055.00P/ Nr: Pl 0050.8055.020 P , Supply Of Bearing Liner #2; Item Number #2; Liner Bearing; Part Number 3029.1107.010 Or Equivalent Ge Part Number; T.I.Drawing Number: 0051.5072.00P/Nr: Pl 0051.5072.030 P; Item Group Number: 1502. One Set Of Bearing Shall Consist Of Following Items: (I) Item Number #2; Liner Bearing; T.I. Part Number 3029.1107.010; (Rem. / On Drawing- 3029.1107.000) Or Equivalent Ge Part Number; Quantity: 01 Number. (Ii) Item Number #23; Locktite; T.I. Part Number 0880.9623.220 Or Equivalent Ge Part Number; Quantity: 01 Number. (Iii) Item Number #6111; Hex. Head Bolt Unc; T.I. Part Number 1511.0601.300; (Rem. / On Drawing- Ts 1511.01) Or Equivalent Ge Part Number; Quantity: 02 Numbers.T.I.Drawing Number: 0051.5072.00P/ Nr: Pl 0051.5072.030 P , Supply Of Hdw. Kit Housing For Bearing Liner #2; Item Number #999; Hdw. Kit Housing Brg 2; T.I. Part Number 3017.1226.010 Or Equivalent Ge Part Number; T.I.Drawing Number: 0051.5072.00P/Nr: Pl 0051.5072.030 P; Item Group Number: 1502.T.I.Drawing Number: 0051.5072.00P/Nr: Pl 0051.5072.030 P , Supply Of Thrust Bearing; Item Number #3; Bearing Thrust; T.I. Part Number 3042.1063.040 Or Equivalent Ge Part Number; T.I.Drawing Number: 0051.5062.00P/Nr: Pl 0051.5062.090 P; Item Group Number: 1507. T.I.Drawing Number: 0051.5062.00P/Nr: Pl 0051.5062.090 P , Supply Of Thrust Bearing; Item Number #4; Bearing Thrust; T.I. Part Number 3042.1053.030 Or Equivalent Ge Part Number; T.I.Drawing Number: 0051.5062.00P/ Nr: Pl 0051.5062.090 P; Item Group Number: 1507. T.I.Drawing Number: 0051.5062.00P/ Nr: Pl 0051.5062.090 P , Supply Of Shim For Thrust Bearing; Item T.I. Part Number: 3042.1055.030 And 3042.1014.010 Or Equivalent Ge Part Number; T.I.Drawing Number: 0051.5062.00P/ Nr: Pl 0051.5062.090 P. One Set Of Shim Shall Consist Of Following Items: (I) Item Number #1; Shim; T.I. Part Number 3042.1055.030 (Rem. / On Drawing- 3042.1055.000) Or Equivalent Ge Part Number; T.I.Drawing Number: 0051.5062.00P/Nr: Pl 0051.5062.090 P; Item Group Number: 1507; Quantity-01 Set. (Ii) Item Number #2; Shim; T.I. Part Number 3042.1014.010 (Rem. / On Drawing- 3042.1014.000) Or Equivalent Ge Part Number; T.I.Drawing Number: 0051.5062.00P/Nr: Pl 0051.5062.090 P; Item Group Number: 1507; Quantity-01 Set.T.I.Drawing Number: 0051.5062.00P/ Nr: Pl 0051.5062.090 P , Supply Of Inlet Guide Vane; Item Number #1301; Inlet Guide Vane; T.I. Part Number 3024.1184.010 Or Equivalent Ge Part Number; T.I. Drawing Number: 0050.8054.00P/ Nr: Pl 0050.8054.080 P; Item Group No: 0811.T.I. Drawing Number: 0050.8054.00P/ Nr: Pl 0050.8054.080 P , Supply Of Gear For Inlet Guide Vane; Item Number #3; Gear; T.I. Part Number 3024.1002.080 (Rem. / On Drawing- 3024.1002.000) Or Equivalent Ge Part Number; T.I. Drawing Number: 0050.8054.00P/ Nr: Pl 0050.8054.080 P; Item Group No: 0811.T.I. Drawing Number: 0050.8054.00P/ Nr: Pl 0050.8054.080 P , Supply Of Miscellaneous Hardware For Inlet Guide Vane. One Set Of Miscellaneous Hardware For Igv Shall Consist Of Following Items: (I) Item Number #1; Socket Head Cap Screw Unc; T.I. Part Number 1525.0401.370 (Rem. / On Drawing- Ts 1525.07) Or Equivalent Ge Part Number; T.I. Drawing Number: 0050.8054.00P/ Nr: Pl 0050.8054.080 P; Item Group No: 0811; Quantity: 64 No. (Ii) Item Number #7; Set Screw; T.I. Part Number 1538.0501.600 Or Equivalent Ge Part Number; T.I. Drawing Number: 0050.8054.00P/ Nr: Pl 0050.8054.080 P; Item Group No: 0811; Quantity: 64 No. (Iii) Item Number #8; Nipple; T.I. Part Number 2375.1358.000(Rem. / On Drawing- 2375.1318.000) Or Equivalent Ge Part Number; T.I. Drawing Number: 0050.8054.00P/ Nr: Pl 0050.8054.080 P; Item Group No: 0811; Quantity: 5 No. (Iv) Item Number #9; Dowel Pin; T.I. Part Number 2236.1130.000 Or Equivalent Ge Part Number; T.I. Drawing Number: 0050.8054.00P/ Nr: Pl 0050.8054.080 P; Item Group No: 0811; Quantity: 32 No. (V) Item Number #14; Hex. Head Bolt Unc; T.I. Part Number 1511.0601.300 (Rem. / On Drawing- Ts 1511.01) Or Equivalent Ge Part Number; T.I. Drawing Number: 0050.8054.00P/ Nr: Pl 0050.8054.080 P; Item Group No: 0811; Quantity: 30 No. (Vi) Item Number #20; Pin Straight Groove; T.I. Part Number 1414.2406.190 Or Equivalent Ge Part Number; T.I. Drawing Number: 0050.8054.00P/ Nr: Pl 0050.8054.080 P; Item Group No: 0811; Quantity: 64No. (Vii) Item Number #24; Socket Head Cap Screw Unc; T.I. Part Number 1525.0602.550 (Rem. / On Drawing- Ts 1525.03) Or Equivalent Ge Part Number; T.I. Drawing Number: 0050.8054.00P/ Nr: Pl 0050.8054.080 P; Item Group No: 0811; Quantity: 4 No. (Viii) Item Number #25; Shim; T.I. Part Number 3024.1022.010 (Rem. / On Drawing- 3024.1022.000) Or Equivalent Ge Part Number; T.I. Drawing Number: 0050.8054.00P/ Nr: Pl 0050.8054.080 P; Item Group No: 0811; Quantity: 10 No. (Ix) Item Number #27; Socket Head Cap Screw Unc; T.I. Part Number 1525.0603.250 (Rem. / On Drawing- Ts 1525.03) Or Equivalent Ge Part Number; T.I. Drawing Number: 0050.8054.00P/ Nr: Pl 0050.8054.080 P; Item Group No: 0811; Quantity: 32 No.T.I. Drawing Number: 0050.8054.00P/ Nr: Pl 0050.8054.080 P , Supply Of Complete Fuel Nozzle Assembly (Dual Fuel) In Assembled And Calibrated Condition, T.I. Drawing Number: 3009.1173.00P / Nr: St 3009.1173.220 P; Item Group Number: 0512. One Set Of Fuel Nozzle Shall Be Supplied In Assembled / Calibrated Condition And Shall Consist Of Following Parts: (I) Item Number #1; Body Fuel Nozzle ; T.I. Part Number: 3009.1178.030 Or Equivalent Ge Part Number; Quantity- 1 Number, (Ii) Itemnumber #2; Locking Plate; T.I. Part Number: 2231.1172.000 (Rem. / On Drawing- 2231.1144.000) Or Equivalent Ge Part Number; Quantity- 1 Number, (Iii) Item Number #3; Anti Seize Compound; T.I. Part Number: 0890.4927.000 Or Equivalent Ge Part Number; Quantity: Use As Required; (Iv) Itemnumber #4; Cap Shrouded; T.I. Part Number: 3009.1024.010 (Rem. / On Drawing- 3009.1024.000) Or Equivalent Ge Part Number; Quantity- 1 Number, (V) Item Number #5; Transition Piece; T.I. Part Number: 3009.1175.010 Or Equivalent Ge Part Number; Quantity- 1 Number, (Vi) Itemnumber #6; Nozzle Tip; T.I. Part Number: 3009.1176.240 (Rem. / On Drawing- 3009.1176.000) Or Equivalent Ge Part Number; Quantity- 1 Number And (Vii) Item Number #4273; Plug; T.I. Part Number: 0762.1110.300 (Rem. / On Drawing- Ts 0762.02) Or Equivalent Ge Part Number; Quantity- 1 Number. T.I. Drawing Number: 3009.1173.00P / Nr: St 3009.1173.220 P , Supply Of Ring Assembly Support Stage #1 Nozzle; T.I. Item Part Number: 0051.4043.020 Or Equivalent Ge Part Number; T.I.Drawing Number: 0051.4043.00P / Nr: Pl 0051.4043.030.P. One Set Of Ring Assembly Support Stage #1 Nozzle Shall Consist Of Following Items: (I) Item Number #1; Ring Assy, Support #1 Stg; T.I. Part Number 0051.4043.020 (Rem. / On Drawing- 0051.4043.000) Or Equivalent Ge Part Number; T.I.Drawing Number: 0051.4043.00P / Nr: Pl 0051.4043.030.P; Item Group Number: 1403; Quantity-01 Number. (Ii) Item Number #2; Clamp Ring; T.I. Part Number 3048.1004.010 (Rem. / On Drawing- 3048.1004.000) Or Equivalent Ge Part Number; T.I.Drawing Number: 0051.4043.00P / Nr: Pl 0051.4043.020.P; Item Group Number: 1403; Quantity-01 Number. (Iii) Item Number #3; Shim; T.I. Part Number 3048.1033.010 (Rem. / On Drawing- 3048.1033.000) Or Equivalent Ge Part Number; T.I.Drawing Number: 0051.4043.00P / Nr: Pl 0051.4043.020.P; Item Group Number: 1403; Quantity-04 Numbers. (Iv) Item Number #4; Hex. Head Bolt Unc; T.I. Part Number 3025.1016.000 (Rem. / On Drawing- 3025.1016.000) Or Equivalent Ge Part Number; T.I.Drawing Number: 0051.4043.00P / Nr: Pl 0051.4043.020.P; Item Group Number: 1403; Quantity-20 Numbers. (V) Item Number #5; Hex. Head Bolt Unc; T.I. Part Number 3025.1017.000 (Rem. / On Drawing- 3025.1017.000) Or Equivalent Ge Part Number; T.I.Drawing Number: 0051.4043.00P / Nr: Pl 0051.4043.020.P; Item Group Number: 1403; Quantity-10 Numbers. (Vi) Item Number #6; Locking Plate; T.I. Part Number 2231.1054.020 Or Equivalent Ge Part Number; T.I.Drawing Number: 0051.4043.00P / Nr: Pl 0051.4043.020.P; Item Group Number: 1403; Quantity-10 Numbers.T.I.Drawing Number: 0051.4043.00P / Nr: Pl 0051.4043.030.P And T.I.Drawing Number: 0051.4043.00P / Nr: Pl 0051.4043.020.P , Supply Of Retaining Plate; Item Number #2; Retaining Plate; T.I. Part Number: 3011.1002.010 Or Equivalent Ge Part Number; T.I. Ref. Drawing Number: 0050.7096.00P/ Nr: Pl 0050.7096.170 P; Item Group Number: 0701. T.I. Ref. Drawing Number: 0050.7096.00P/ Nr: Pl 0050.7096.170 P , Supply Of Pipe Piece For Inlet Guide Vane; Item Number #16; Pipe Piece; T.I. Part Number 3024.1007.080 (Rem. / On Drawing- 3024.1007.000) Or Equivalent Ge Part Number; T.I. Drawing Number: 0050.8054.00P/ Nr: Pl 0050.8054.080 P; Item Group No: 0811. T.I. Drawing Number: 0050.8054.00P/ Nr: Pl 0050.8054.080 P , Supply Of Oil Seal Ring For Bearing Liner Number #1; Item Number #5; Oil Seal Ring; T.I. Part Number 3019.1046.030 (Rem. / On Drawing- 3019.1046.000) Or Equivalent Ge Part Number;T.I.Drawing Number: 0050.8055.00P/ Nr: Pl 0050.8055.020 P; Item Group Number: 0801; Quantity-01 Number. T.I.Drawing Number: 0050.8055.00P/ Nr: Pl 0050.8055.020 P , Supply Of Oil Seal Ring For Bearing Liner Number #1; Item Number #7; Oil Seal Ring; T.I. Part Number 3019.1058.020 (Rem. / On Drawing- 3019.1058.000) Or Equivalent Ge Part Number;T.I.Drawing Number: 0050.8055.00P/ Nr: Pl 0050.8055.020 P; Item Group Number: 0801. T.I.Drawing Number: 0050.8055.00P/ Nr: Pl 0050.8055.020 P , Supply Of Oil Seal Ring For Bearing Liner Number #1; Item Number #8; Oil Seal Ring; T.I. Part Number 3019.1059.010 (Rem. / On Drawing- 3019.1059.000) Or Equivalent Ge Part Number;T.I.Drawing Number: 0050.8055.00P/ Nr: Pl 0050.8055.020 P; Item Group Number: 0801; Quantity-01 Number. T.I.Drawing Number: 0050.8055.00P/ Nr: Pl 0050.8055.020 P Attached For Reference. , Supply Of Oil Seal Ring For Bearing Liner Number #2; Item Number #3; Oil Seal Ring; T.I. Part Number 3019.1023.010 (Rem. / On Drawing- 3019.1023.000) Or Equivalent Ge Part Number;T.I.Drawing Number: 0051.5072.00P/Nr: Pl 0051.5072.030 P; Item Group Number: 1502. T.I.Drawing Number: 0051.5072.00P/Nr: Pl 0051.5072.030 P , Supply Of Stage 1 Shroud Kit Along With Its Installation Hardware; T.I. Part Number: 3007.1055.080 Or Equivalent Ge Part Number; T.I. Drawing Number: 0050.7108.00P/ Nr: Pl 0050.7108.060 P; Item Group Number: 0710. One Set Of Shroud Shall Consists Of Following: (I) Item Number #20; Shroud Set #1 Stage; T.I. Part Number: 3007.1055.080 Or Equivalent Ge Part Number; Quantity- 1 Set. (Ii) Item Number #5; Dowel Pin; T.I. Part Number: 2236.1132.000 Or Equivalent Ge Part Number; Quantity: 36 Pieces. (Iii) Item Number #13; Gasket; T.I. Part Number: 2427.1584.010; (Rem. / On Drawing- 2427.1584.000) Or Equivalent Ge Part Number; Quantity: 3 Pieces. (Iv) Item Number #15; Key; T.I. Part Number: 3007.1054.010; (Rem. / On Drawing- 3007.1054.000) Or Equivalent Ge Part Number; Quantity: 2 Pieces. (V) Item Number #16; Key; T.I. Part Number: 3007.1053.010; (Rem. / On Drawing- 3007.1053.000) Or Equivalent Ge Part Number; Quantity: 34 Pieces. (Vi) Item Number #6043; Hex Head Bolt, Unc; T.I. Part Number: 1510.1205.150 (Rem. / On Drawing- Ts 1510.01) Or Equivalent Ge Part Number; Quantity: 24 Pieces. Any Other Item Which Is Required For Installation For 1St Stage Shroud (And Is Not Mentioned Above) Shall Be Supplied Along With Shroud I.E. Supplied Shroud Kit Shall Come Up With All The Hardware Required For Installation. Stage One Shroud To Be Supplied With Suitable Coating As Per Oem Norms.T.I. Drawing Number: 0050.7108.00P/ Nr: Pl 0050.7108.060 P , Supply Of Stage 2 Shroud Along With Its Installation Hardware; T.I. Part Number: 3007.1056.020 Or Equivalent Ge Part Number; T.I. Drawing Number: 0050.7108.00P/ Nr: Pl 0050.7108.060 P; Item Group Number: 0710. One Set Of Shroud Shall Consists Of Following: (I) Item Number #21; Shroud Set #2 Stage; T.I. Part Number: 3007.1056.020 Or Equivalent Ge Part Number; Quantity- 1 Set. (Ii) Item Number #6; Pin; T.I. Part Number: 2236.1150.000 Or Equivalent Ge Part Number; Quantity: 30 Pieces. (Iii) Item Number #17; Key; T.I. Part Number: 3007.1054.020; (Rem. / On Drawing- 3007.1054.000) Or Equivalent Ge Part Number; Quantity: 2 Pieces. (Iv) Item Number #18; Key; T.I. Part Number: 3007.1053.020; (Rem. / On Drawing- 3007.1053.000) Or Equivalent Ge Part Number; Quantity: 28 Pieces. (V) Item Number #4272; Plug; T.I. Part Number: 0762.1110.20; (Rem. / On Drawing- Ts 0762.02) Or Equivalent Ge Part Number; Quantity: 30 Pieces. Any Other Item Which Is Required For Installation For 2Nd Stage Shroud (And Is Not Mentioned Above) Shall Be Supplied Along With Shroud I.E. Supplied Shroud Kit Shall Come Up With All The Hardware Required For Installation. Stage Two Shroud To Be Supplied With Suitable Coating As Per Oem Norms.T.I. Drawing Number: 0050.7108.00P/ Nr: Pl 0050.7108.060 P , Supply Of Spring For Inlet Guide Vane; Item Number #4; Spring; T.I. Part Number 3024.1003.010 (Rem. / On Drawing- 3024.1003.000) Or Equivalent Ge Part Number; T.I. Drawing Number: 0050.8054.00P/ Nr: Pl 0050.8054.080 P; Item Group No: 0811.T.I. Drawing Number: 0050.8054.00P/ Nr: Pl 0050.8054.080 P , Supply Of Ring Seal For Bearing Liner Number #1; Item Number #4; Ring Seal; T.I. Part Number 3018.1003.010 (Rem. / On Drawing- 3018.1003.000) Or Equivalent Ge Part Number;T.I.Drawing Number: 0050.8055.00P/ Nr: Pl 0050.8055.020 P; Item Group Number: 0801.T.I.Drawing Number: 0050.8055.00P/ Nr: Pl 0050.8055.020 P , Supply Of Cross Fire Tube; Item Number #12; T.I. Part Number: 3011.1028.010 (Rem. / On Drawing- 3011.1028.000) Or Equivalent Ge Part Number; T.I. Ref. Drawing Number: 0050.7096.00P/ Nr: Pl 0050.7096.170 P; Item Group Number: 0701. T.I. Ref. Drawing Number: 0050.7096.00P/ Nr: Pl 0050.7096.170 P , Supply Of Transition Piece Hardware; T.I. Drawing Number: 0050.7107.00P/ Nr: Pl 0050.7107.010 P; Item Group Number: 0717. One Set Of Transition Piece Hardware Shall Consist Of Following Items: (I) Item Number #4; Bolt ; T.I. Part Number: 3025.1075.020 Or Equivalent Ge Part Number; Quantity- 01 Number; (Ii) Itemnumber #5; Locking Plate; T.I. Part Number: 3045.1056.030 (Rem. / On Drawing- 3045.1056.000) Or Equivalent Ge Part Number; Quantity- 01 Number; (Iii) Itemnumber #6; Bolt; T.I. Part Number: 3025.1074.010 Or Equivalent Ge Part Number; Quantity- 01 Number (Iv) Itemnumber #7; Seal; T.I.Part Number: 3045.1065.010 (Rem. / On Drawing- 3045.1065.000) Or Equivalent Ge Part Number; Quantity- 01 Number (V) Item Number #3325; Locking Plate; T.I. Part Number: 2231.1055.000 Or Equivalent Ge Part Number; Quantity- 02 Numbers And (Vi) Itemnumber #6505; Hexagon Nut Unc; T.I. Part Number: 1440.0101.210 (Rem. / On Drawing- Ts 1440.01) Or Equivalent Ge Part Number; Quantity- 02 Numbers.T.I. Drawing Number: 0050.7107.00P/ Nr: Pl 0050.7107.010 P , Supply Of Spring Washer For Inlet Guide Vane; Item Number #15; Spring Washer ; T.I. Part Number 1478.2100.650 (Rem. / On Drawing- Ts 1478.02) Or Equivalent Ge Part Number; T.I. Drawing Number: 0050.8054.00P/ Nr: Pl 0050.8054.080 P; Item Group No: 0811.T.I. Part Number 1478.2100.650 (Rem. / On Drawing- Ts 1478.02) , Supply Of Washer For Inlet Guide Vane; Item Number #28; Washer; T.I. Part Number 1478.0900.400 Or Equivalent Ge Part Number; T.I. Drawing Number: 0050.8054.00P/ Nr: Pl 0050.8054.080 P; Item Group No: 0811. T.I. Drawing Number: 0050.8054.00P/ Nr: Pl 0050.8054.080 , Supply Of Washer For Inlet Guide Vane; Item Number #29; Washer; Part Number 3024.1179.030 (Rem. / On Drawing- 3024.1179.000) Or Equivalent Ge Part Number; T.I. Drawing Number: 0050.8054.00P/ Nr: Pl 0050.8054.080 P; Item Group No: 0811. T.I. Drawing Number: 0050.8054.00P/ Nr: Pl 0050.8054.080 => Limited
