Construction Of Community Sanitary Complex At Gulab Garh, Block:- Padder, Pyt.:- Gulabgarh, Under Head:-Sbm ( G ) , Plan For The Year:- 2022-23, Distt.:- Kishtwar
Tender Value
3 Lakhs
Estimated cost
Bid Submission
04 Aug 2022
0 days left
EMD
6000
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kishtwar → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Community Sanitary Complex At Gulab Garh, Block:- Padder, Pyt.:- Gulabgarh, Under Head:-Sbm ( G ) , Plan For The Year:- 2022-23, Distt.:- Kishtwar
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 min width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides andramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth asdirected |
| 2 | P/Laying dry stone metal |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. Allcomplete1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 4 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :r 1:4 ( 1 cement : 4 coarse sand) |
| 5 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level |
| 6 | Half brick masonry Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth including curing in : 6.15.1 Cement mortar 1:3 ( 1 cement : 3 coarse sand) 6.15.2 Cement mortar 1:4 ( 1 cement : 4 coarse sand) |
| 7 | Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge. |
| 8 | CAST-IN-SITUProviding and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 9 | FORM WORK Centering and shuttering including strutting, propping etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platforms. |
| 10 | FORM WORK Centering and shuttering including strutting, propping etc. and removal of form for: 5.9.1Foundations, footings, bases of columns etc. for mass concrete. |
| 11 | Reinforcement for RCC Work including straightning,Cutting,Bending,Binding & placing in position. |
| 12 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 gradedstone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20mm nominal size stone aggregate. |
| 13 | 15mm Cement plasteron the rough side of single or half brick wall of mix:1 : 6 ( 1 cement : 6 fine sand) |
| 14 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including lSI marked M.S. pressed Butt hinges bright finished of required size with necessary screws excluding panelling which will be paid for separately,al! complete as per direction of engineer- in charge.Second kail wood |
| 15 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.Float glass panes 4 mm thick glass panes |
| 16 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.Float glass panes 4 mm thick glass panes |
| 17 | Distempering with dry distemper of approved brand and manufacture (two or more coats) and of required shade on new work, over and including water thinnable priming coat to give an even shad |
| 18 | Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) |
| 19 | Applying priming coat:With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 20 | Painting of doors and windows with ready mixed synthetic enamel paint of approved brand and manufacture in all shades. |
| 21 | Proving and Fixing water Closet squatting pan (indian Type WC Pan ) with 100 mm PVC \"P\" or S-Trap , 10 Leitre low level PVC Flusing Cistren including flush Pipe ( of Approved Make ) manullay controlled Device ( hand Lever ) conforming to IS;7231, with all fitting and Fixtures Complete including cutting and making good the walls and floor wherever requried. Orrisa Pattern white Vitreous china WC Pan of Size 580x440 mm with intergeral type foot rest |
| 22 | P/Laying GI Pipes Complete 15mm nominal size |
| 23 | P/Laying GI Pipes Complete 20mm nominal size |
| 24 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank (Sintex, Star,) or equivalent haing valid ISI License CP Brass Fitting |
| 25 | P/F PVC Pipes for PVC filling 100mm Dia |
| 26 | P/F PVC Pipes for PVC filling 75mm Dia |
| 27 | P/F PVC Pipes for PVC fillingplain board 100mm Dia |
| 28 | P/F PVC Pipes for PVC fillingplain board 100mm Dia |
| 29 | P/F Ball Valve (brass) of approved quqlity 15mm dia |
| 30 | P/Fixing 100 mm Steel Cast iron grating for gully, floor or nahani Trap |
| 31 | Providing and fixing 15 mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 610 gms |
| 32 | P/Fixing CP Brass Piller Cock of Approved Make confirming to IS;8931 15mm nominal Bore |
| 33 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 |
| 34 | Carriage of Bricks at an average 55 km MT & 500m by animal Transport. |
| 35 | Carriage of Sand & Bajree at an average 1 Km Mtr by animal Transport.. |
| 36 | CIB all complete as per direction in charge. |
AI Tender Summary
Tender Timeline
Jul 18, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedAug 04, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedAug 05, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender