|
| 1 | Cleaning of septic tank chamber by removing effluent water and sludge and buried the same in excavated pits, by digging pits in hard/dense soil including removing surplus earth to a distance not exceeding 50 mtr from starting point and filling up the top portion of pit by excavated soil and sprinkling bleaching powder @ 0.5 Kg per Sqm on excavated areas including temporary baricades complete all as specified and directed. |
| 2 | Cleaning of manholes n.exc 1.5m deep including desludging and dewatering either by mechanical pump or manually and taking out solids/ semi-solids, well flushing with water, removing to a distance exc. 100m but n. exc. 250m and depositing in ditches including necessary excavation and earthwork in soft / loose soil to a distance exc 50m and sprinkling bleaching powder (including supply of bleaching powder) in the periphery of one metre around manhole complete all as specified and directed. |
| 3 | Cleaning of 150mm dia SWG/ PVC sewage pipeline including manholes after removing the cover (CI or RCC cover) and placing the same after cleaning the manholes/ sewage line complete all as specified and directed. |
| 4 | Demolition and breaking up drain pipes (Salt glazed ware, AC or reinforced concrete) set in cement mortar for 150mm bore complete all as specified & directed. |
| 5 | S&F PVC (SWR) pipes single socketed 160 mm dia in any length with rubber ring joints laid in trenches or floor complete all as specified and directed. |
| 6 | M&L for PCC 1:3:6 type C2(using 40 mm graded aggregate) to bed of drain pipes including packing under and haunching against the sides of pipes, after they are laid and tested for 160mm bore pipe complete all as specified and directed. |
| 7 | Demolition of precast cement concrete block walling built in CM complete all as specified and directed. |
| 8 | M&L for rendering 10mm thick plaster in CM 1:4 on fair faces of concrete surfaces finished even and smooth w/o using extra cement. |
| 9 | M&L for PCC (1:2:4) type B-1 (using 20mm graded stone aggregates) as in coping / benching or similar work etc including necessary formwork complete all as specified and directed. |
| 10 | M&L for 10mm thick rendering in CM 1:6 on fair faces of bricks/concrete surfaces finished rough for fixing of tiles complete all as specified and directed. |
| 11 | Demolition of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 12 | Dismantling fencing wire mesh any type complete all as directed. |
| 13 | Dismantling posts or struts (wood , steel or RCC) any section including taking out embedded portion from concrete masonary etc. and making good disturbed ground complete all as specified and directed. |
| 14 | Demolition of brickwork or solid block / stone boulder masonry, built in cement mortar including all quoins, pillars, etcall as specified and directed. |
| 15 | M&L for providing pre-cast cement concrete block masonry 1:3:6 type C1 (using 20 mm graded crushed stone aggregate) solid blocks, exc. 10 cm in width and setting in cement mortar (1:4), complete complete all as specified and directed. |
| 16 | Demolition of precast RCC in ground floor and pavings n exc 15 cm thickness (below or above ground complete all as specified and directed. |
| 17 | M&L for precast reinforced cement concrete type B1 1:2:4 (using 20mm graded aggregate) in cover slab for manholes and similar articles with plain faces and set in CM 1:6 complete all as specified and as directed. |
| 18 | Use and waste of flat formwork to vertical faces of drain and similar work. |
| 19 | M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 20 | Taking down of cement plaster of any description on brick including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 21 | M&L for 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 and finished the surface even and smooth without using extra cement using WPC @ 3% by weight of cement complete all as specified and directed.(Note : WPC shall be measured and paid separately) |
| 22 | Supply only integral water proofing compound complete all as specified and directed. |
| 23 | M&L for PCC (1:3:6) type C-2 (using 20mm graded aggregates) as in mud stops, rounded or champhered on edges incl necy formwork complete all as specified and directed. |
| 24 | M&L for PCC (1:3:6) type C-1 (using 40mm graded aggregates) as in drain wall etc incl necy formwork complete all as specified and directed. |
| 25 | M&L for PCC (1:2:4) type B -1 (using 20mm graded aggregates) as in surface channel and drain including necessary formwork complete all as specified and directed. |
| 26 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and directed. |
| 27 | Demolition of cement concrete unreinforced in floors n exc 15 cm thickness in ground floor (below or above GL) completed all as specified and directed. |
| 28 | Material and labour for PCC 1:4:8 type D2 (using 40mm graded aggregate) as in foundation filling and mass concrete etc complete all as specified and directed. |
| 29 | M&L for PCC type C-2 (1:3:6) using 40mm graded stone aggregates as in foundation of RCC posts or struts including necessary formwork complete all as specified and directed. |
| 30 | M&L for mild steel post and struts in fencing including cutting tops to shape as swan neck drilling holes notching for wire etc and flat iron fillets for securing wire mesh etc incl all necy drilling, bolting or riveting etc and similar work conforming to Fe 410 complete all as specified and directed. |
| 31 | Supply and fixmild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5 cm and n exc 10 cm long and dia of neck 11 to 15 mm complete all as specified and directed. |
| 32 | S&F in repair galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc including taking down old barbed wire complete all as specified and directed. |
| 33 | Supply only chain link fencing mild steel galvanised any size or type complete all as specified and directed. |
| 34 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wirecomplete all as specified and directed. |
| 35 | S&F 10 mm dia bars as stiffening member in fencing including securing the fencing complete all as specified and directed. |
| 36 | M&L for applying two coat of synthetic enamal paint over a coat of red oxide primer on steel surfaces of any description, exc 10cm in width or girth complete all as specified and directed. |
| 37 | M&L for walling of random rubble, uncoursed well bonded and solidly hearted and built in cement mortar 1:6 with PCC 1:3:6 type C-1 bond stone set in CM 1:6 complete all as specified and directed.Note: Precast PCC bond stone shall be measured and paid separately. |
| 38 | Labour only for walling of random rubble, uncoursed well bonded and solidly hearted and built in cement mortar 1:6 with PCC 1:3:6 type C-1 bond stone set in CM 1:6 complete all as specified and directed.Note: Precast PCC bond stone shall be measured and paid separately. |
| 39 | Extra over stone walling granite or trap stone for hammer dressing with maximum depression on face from straight edge held against the dressed surface n exc. 40 mm and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses complete all as specified and directed. |
| 40 | M&L for hand packing with broken stone/ boulder behind backing of retaining wall, in layers etc complete all as specified and directed. |
| 41 | M&L for PCC type B-1 ,1:2:4 (using 20mm graded aggregate) as incoping inluding necessary formwork complete all as specified and directed. |
| 42 | M&L for keyed pointing to random rubble masonary uncoursed or brought upto course in cement mortar 1:4 complete all as specified and directed. |
| 43 | M&L for PCC 1:3:6 type C-1 precast blocks exc 10 cm in width as in bond stone and set in CM 1:4 complete all as specified and directed. |
| 44 | S&F in repair 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 45 | M&L for 50mm thick PCC 1:3:6 type C-2 (using 20mm graded aggregates) as in plinth protection/ path, floor sub-base etc incl finishing the surface even and smooth w/o using extra cement. |
| 46 | M&L for chequered cement concrete tiles 200x200x25mm etc set and jointed and pointed in neat cement slurry in floor with grey cement and pigment complete as specified and directed. |
| 47 | M&L for 15mm thick screed bed in CM 1:6 or laying floor tiles etc finished rough. |
| 48 | M&L for machine pressed precast conctete interlocking paver block with gray cement and pigment any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-35 Grade complete all as specified and directed. |
| 49 | M&L for sand filling under floors or in foundations including watering and consolidation and well ramming complete all as specified and directed.Note : Only Punned down thickness shall be measured and paid. |
