Construction Of Common Demonstration Centre At Sounder Dacchan Including Land Leveling And Construction Of 50Mtr B Wall Under Rr Plan
Tender Value
61.13 Lakhs
Estimated cost
Bid Submission
25 Jul 2022
0 days left
EMD
1.22 Lakhs
Bank guarantee accepted
Document Fee
1500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
marwah → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Common Demonstration Centre At Sounder Dacchan Including Land Leveling And Construction Of 50Mtr B Wall Under Rr Plan
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in Charge.All kinds of soil in leveling:70% all kinds of soil & 30% ordinary Rock for leveling of ground subject to actual at site. |
| 2 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (Not exceeding 1.5 mtr in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, depth upto 1.5mtr. including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth is to be levelled and neatlydressed in: 70 %All kinds of soils , 30 % Ordinary Rock |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) |
| 4 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) |
| 5 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°,landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiralstair cases upto five level including curing but excluding the cost of centring, shuttering,finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 6 | Reinforced cement concrete work in walls (any thickness) including attached pilasters,buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts andstruts upto floor five level including curing but excluding cost of centering shuttering,finishing and reinforcement.1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 7 | Random Rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including levelling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) and curing complete at window sills, ceiling level and the like:Cement mortar 1:6 (1 Cement : 6 coarse sand) Nallah |
| 8 | Dry random rubble masonry with hard stone in foundation and plinth: without bond stone |
| 9 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m |
| 10 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fastenersof required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Second class deodar wood |
| 11 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing inposition and binding all complete above plinth level.Mild steel and medium tensile steel bars |
| 12 | Centering and shuttering including strutting, propping etc. and removal of form for : |
| 13 | I)Foundations: footings, bases of columnsetc. for mass concrete. |
| 14 | ii) Suspended floors, roofs, landings, balconiesand access platform. |
| 15 | iii) Lintels, beams, plinth beams, girders,bressumers and centilevers. |
| 16 | iv) Columns, Pillars, Piers, Abutments, Postsand Struts |
| 17 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level.1:4:8 (1 cement: 4 fine sand : 8 gradedstone aggregate 40mm nominal size) |
| 18 | 20mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand) |
| 19 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). Second class kail wood 35 mm |
| 20 | Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete :125x65x2.12 mm |
| 21 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebatesto be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.Plain particle board flat pressed, 3 layer orgraded wood particle board medium density GradeIS: 3087 marked |
| 22 | Providing and fixing glazed shutters for doors, window and clerestory windows using 10 kg/sqm (4mm thick) float glass panes including lSI marked M.S. pressed butt hinf!eS bright finished of required size with necessary screws.Second class Kail wood 35 mm thick |
| 23 | Providing and fixing 35 mm thick wire gauze shutters using galvanised M.S. wire gauze of average width for aperture 1.4 mm in both directoin with wire of dia. 0.63 mm for doors, windows and clerestory windows with hinges and necessary screws :lSI marked M.S. pressed bright finished butt hinges with necessary screws of required size Second class kail wood. |
| 24 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete.Fixed to openings / wooden frames with rawl plugs screws etc. |
| 25 | Making plinth protection 50 mm thick of cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggreagate 20mmnominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sandincluding finishing the top smooth.Nallah |
| 26 | Providing and laying vitrified floor tiles in different sizes (thickness tobe specified by the manufacturer) with water absorption less than 0.08%and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete.Size of tile 600x600 mm |
| 27 | Tile work in skirting, risers of steps and dado (upto 2m height) over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm including pointing in white cement mixed with pigment of matching shade complete. 8 mm thick |
| 28 | Providing and fixing 1st quality ceramic glazed tiles conforming to IS :·13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Eningeerin- Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 ( 1 cement: 3 coarse sand) and jointing wtih grey cement slurry@ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete |
| 29 | Strctural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 30 | Providing corrugated G. S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G. I limpet washers or with G. I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape whereever required.0.63mm thick with zinc coating not less than 27 5gm/m2 |
| 31 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position :Second class kail wood |
| 32 | Providing and fixing hard board ceiling, sheet of approved quality with necessary nails etc. complete (frame work to be paid forseparately)Standard Quality board 9mm thick |
| 33 | Applying priming coat:with ready mixed pink or grey primer ofapproved brand and manufacture on wood work (hard and soft wood) |
| 34 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work |
| 35 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 36 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and ineluding priming coat with cement primer Qty. vide item no. 29 = 388.39 sqm |
| 37 | Providing and fixing plained eaves boarding 250x32 mm (nominal size) 146\"-0\" ft or 44.51 mtr |
| 38 | Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G. I. limpet and bitumen washers complete. 0.63mm thick with zinc coating not less than 275gm/m2150\"-0\" ft or 45.73 mtr |
| 39 | Providing valleys of 90cm wide overall in plains G.S. sheets fixed with polymer coated J. or L. hooks, bolts and nuts 8 mm dia G I. limpet and bitumen washers complete. 50 ft or 15.24 mtr |
| 40 | Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed torequired colour or shade with nuts and screws etc. complete : 250x16 mm |
| 41 | Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete |
| 42 | 200x10mm |
| 43 | 100x10 mm |
| 44 | Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. |
| 45 | 125mm |
| 46 | 100mm |
| 47 | Providing and fixing aluminum hanging floor door stopper, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparentor dyed to required colour or shade with necessary screws etc. complete :Single rubber stopper |
| 48 | Carriage of Material |
| 49 | carriage of stone at an avg Distance of 2.50km by H.L |
| 50 | carriage of sand at an avg Distance of 4.00 km by H.L |
| 51 | Carriage of aggregate at an avg Distance of 48.00 km by MT & 3.00 km by H.L |
| 52 | carriage of aggregate at an avg Distance of 4.00 km by H.L |
| 53 | carriage of cement at an avg Distance of 48.00 km by M.T & 03Km by H.L |
| 54 | carriage of Steelat an avg Distance of 48.00 km by M.T & 03Km by H.L |
| 55 | carriage of CGI Sheets at an avg Distance of 48.00 km by M.T & 03Km by H.L |
AI Tender Summary
Tender Timeline
Jul 16, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedJul 25, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJul 25, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender